Ship to party can not be found in freight order for cost calculation

Dear All,
Cost charge can not be calculated because of missing ship to part. Please help me about this problem
In my rate table, there are 3 combinations which are Product + Carier + Ship to party.and cost will be calculated according to weight. Also resolution base is selected product in calculation sheet.
When I press "calculate charges" button in fregiht order and have a look at charge anylysis log, product ID and Carier are found successfully, ship to part not. Erro message is "Calculation base SHIP_To_PARTY has [ ] on resoltion base product"
Also how can I add new scale base , is there any user exit or any documentation?
Regards,
Ali

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

Similar Messages

Ship to party is not comming same in Sales order from Quotation?

Dear all,
Here I have a scenario,
(1) I created 1111 sold to party and extended fot SH,BP,PY and
(2) I created 2222 ship to pary is only a SH not others.
Now when i enter 1111 for sold to party and 2222 as a ship to party in Quotation and when i am going to create a order with reference to that Quoatation the system pick up 1111 as a sold to party and also ship to party same in order.
Why?
Can anybody guide me
Thanks
Jayesh

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

The additive cost can not display on the work order plan cost

dear friends
first i run the ck74n for the additive cost ,second i run the ck11n for cost estimate ,i can see that the additive cost update to the standard cost successfully ,at last i run the ck24 mark and release the standard cost,but when i raise a work order ,i can not see the additive cost in the plan cost ,i do not know the reason ,do you have some suggestion
thanks

Hi
This behaviour is expected and standard...
In Std cost estimate, you have the option of inputting components manually in CK74N... But the actual costs in Prod order will come either from Material issues/Activity Confirmations or manual postings from FI... There is no option to enter additive costs in actuals.. Hence, there is no option of "additive costs" in the Planned costng variant of Prod order
If you enter any additive costs in CK11N, It is done because you cant estimate it through Qty Structure.. But, during actuals, the actual costs are all available through Material issues/Activity Confirmations.. hence, the additive costs does not apply here
BR,Ajay M

Tax condition(JVAT) of ship to party is not triggering in Sales order

Hi,
Tax condition(JVAT) of ship to party is not triggering in sales order...
Scenario:
Tax condition types:
JCST- CST Payable
JVAT- VAT Payable GJ
Customer Tax classification for JVAT in OVK3:
1- VAT 4%
A- VAT 0%
B- VAT 2%
Material Tax classification for JVAT in OVK4:
0-Tax Exempt
1-Full Tax
In CMR for
Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / 1 / VAT 4%
In CMR for
Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / A / VAT 0%
Access Seq: JLST
Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
Now the sale(Shipping to) is happening in Gujarat..
In sales order
I entered SP:1001 and SH: 2001
When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
Kindly guide me where i went wrong...
Regards
Azeez.Mohd

Hi Friends.
I found the solution...
Its customization mistake..
Solution:
When we have 'n' tax categories then we should have 'n' condition tables..
I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
with regards

The ship-to party could not be determined

Hi All,
while i was creating abilling doc i got this massage ( The ship-to party could not be determined) system massage NU 049
although i am using acustomer which i defined to it aship-to party and this ship-to party already retrived in the sales order and delivery so can u help me pls.

Hello
Are you sure you are getting Error Message NU 049.
B'coz this message is associated to material, when NU049 Material & is flagged for deletion, i.e., you chose a material that is flagged for deletion in the material master.
If that's not the case then kindly post message associate to shipping partner. I hope this should be VP-194: No customer master record exists for ship-to party &
As most of the partner error message number starts with
- VP
- VPD
- VPD_DETERM_LOG
Thanks & Regards
JP

Albums can not play because original files can not be found

Suddenly about half of my albums in iTunes will not play. Error message says tunes will not play because original files can not be found. The other albums still play fine.

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool have moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you might be able to reconnect iTunes to them using my FindTracks script.
tt2

Itunes can't play the file because the original file can not be found

There is many things wrong with that message and I don't know why.
I had around 30 songs off an album on my computer
I put the album on Itunes
I edited them and then they played fine
I put them on my ipod and then deleted them off coz i wanted to put something else on
but i found out I had more space to put the other 30 songs I had from before back on so I went to the album
when I wanted to play a song it said "Itunes Can't play the file because the original file can not be found"
1) The original file was on my computer, in the exact place where I left it last time when Itunes played it
2) I did not change the file path name
3) I did not change the folder path name
4) The songs aren't corrupted
5) They play fine on other programs
I deleted them all off and took them on again and they played fine but whey did they keep stuffing up before?

The "missing file" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then say no when asked to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions. I can provide a step by step guide if you give me the two paths.
In some cases iTunes may be able to repair itself if you go through the same steps and locate the lost track. It may then offer to attempt to automatically fix other broken links. Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2

TS1362 songs disappear from my library and it says the original file can not be found

for some reason the songs that i have on my library say they are there but when i go to play the song it says the orignial file can not be found and asks me to locate it. when i go to do that i cant find the file. what do i do?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Long running reports end successfully - present s "page can not be found"

Long running reports and browser timeouts - page can not be found"
We are launching Oracle 9i Reports from a Portal 9ias (release 9.0.2.2) system. We are in production with about 100 users. It is not going well with respect to Report problems.
We have the following problems:
1) hanging reports,
2) reports where parameter screens will not present due to large LOV on parameter screen,
3) and the most aggravating problem is "Page can not be found" presented to user when in fact the report ran successfully and create a .pdf.
We are at our wits end with Oracle Support and the Oracle Portal and Reports product.
As I said, I am launching Oracle Reports 9i from a Portal 9.0.2.2 application. I have several long running reports that complete successfully but return to the user an error "Page can not be found". Meta-link Note: 189454.1 suggests a modification to ReceiveTimeout parameter in the pc registry. We set the ReceiveTimeout parameter to 7200000. This did not solve the problem. Users still receive "Page can not be found".
Is there a report server side setting that we must set also ... or some other setting we should check?
I need to solve this issue. Is there someone out there that can help? Are there other people having similar Oracle Reports issues? According to Oracle Support we are the only people with these issues. Are we?

1) If you can reproduce the Reports Hanging issue consistently you can push Oracle Support to file a bug.
2) I am not sure about this now, but again you can take this to Oracle Support and push for resolution.
3) There are some problems with IE - Adobe integration. This is not a Reports bug. You can try
(a) Switching off Adobe - web integration in Adobe Acrobat reader settings, so that Adobe will not automatically open pdf file in web. Instead a dialog will be shown as to which application to open the pdf file or save it to disk and user can save the file to disk and open.
(b) Use IE latest version. (or some other browser like Netscape )
[ You can roll back the ReceiveTimeout param change you made to see the impacts one at a time ]
1) To confirm that this is a Adobe - IE pdf problem run the same report to htmlcss, rtf. If these come fine, then we can ascertain that this is Adobe - IE issue.
2) Give http://host:port/reports/rwservlet/showjobs?server=server_name. You can see all the jobs and their jobids. For the concerned jobs you can click and see whether output is actually generated or not.
Thanks
The Oracle Reports Team
The statements and opinions expressed here are my own and not that of my employer

I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?

I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?

Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
Operating System
Default location of iTunes library
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\iTunes\
Microsoft Windows Vista
\Users\[your username]\Music\iTunes\
Microsoft Windows 7
\Users\[your username]\My Music\iTunes\
... and open the iTunes library you find in there.

After upgrading to Lion, my Canon 7d can not be found.

After upgrading to Lion, my Canon 7d can not be found. I have used the USB connection to connect to my camera for several years with no problems, until now. I have reset the SMC, by powering off the computer and unplugging everything for approx 30 minutes. There are no new drivers available and any assistance will be appreciated.

I was having the same issue after upgrading to Lion OSX. I searched the web and found many people had the same problem but no solution so...
I called Canon and they told me to run 'Image Capture' its part of the Canon Software Suite so you should have it and then try downloading the pictures like you usually do. I use 'Image Browser' and with 'Image Capture' running in the background it works perfectly now.
Hope this helps!!

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

How can I relocate songs from my Itunes? Itunes tells me that the original files can not be found! can someone help?

How can I relocate songs from my Itunes? Itunes tells me that the original files can not be found! can someone help?

punzete wrote:
I can't do it that way. I erase these songs from the iTunes Library, but when I sycronize the iPhone, all these songs are copied again to the Library. Isn't there any way to stop that? Everything I buy on iTunes Store through my iPhone cannot be erased from the iPhone?
WHY can't you do it the way 100 million people do it?

When you are pulling music from a hard drive and it says music can not be found, is there a way to stop it from doing that every time I play music from my computer? It used to find all music now it only finds 1 song at a time

When pulling music from a harddrive and it say music can not be found, is there a way to stop this from happening every time I play music on my computer? It used to find all music when serching for song but now it only finds 1 at a time. I have over 2000 songs so I can't go through this every time.

1) However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
Yes
2) Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
If you can play the movies in iTunes, you should be able to open the movie files using Quicktime, which should already be on your system. If you have already transferred the files to your flash drive, open the flash drive in Finder, and hold control when you click on the movie file (or right click if you have the enabled) and select Open With Quicktime Player. This should play the movie directly from the flash drive.
If you want to set all .m4v files to open with Quicktime by just double clicking on the file, you can follow the steps here: http://www.tech-recipes.com/rx/2573/os_x_how_to_change_default_application_to_op en_file_type/
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
You can move the TV shows to your flash drive by dragging them from the iTunes window to your flash drive in Finder or the flash drive icon on the desktop. When you are sure everything is transferred over to your external device, you can delete the movie from iTunes. I recommend playing the videos from the flash drive first before deleting them in iTunes.
To delete the videos from iTunes, you can highlight them and press the delete key on your keyboard. In the next prompt, you would want to move it to the trash so that it is deleted from your internal hard drive.
I hope that helps!

Ship to party can not be found in freight order for cost calculation

Similar Messages

Maybe you are looking for