Ship to party is not available in account group while creating Customer Master

Hello All.
While creating customer master in account group there is no SH(ship to party) what is the purpose of it . I can see PY BP but not SH (XD01). We always use Sold to Party but i have seen Payer and Bill to party as well while creating customer master . Just got confused why we select such options when everything comes under sold to party.
I cannot see SH while creating customer for the first time is it necessary that SH should there while creating customer master.
Regards

Hi ,,
please do assign ship to party to account group .
SPRO --> S&D --> BASIC FUNCTION --> PARTNER DETERMINATION--> SET UP PARTNER DETERMINATION --> FOR CUSTOMER MASTER -- > A/C GROUP - FUNCTION ASSIGNMENT
Here assign ship to party(sh) to your account group.
Now you will find sh in customer master.
If you want further clarification , please let me know.
Regards
Patchala.

Similar Messages

  • Contract: Sold/Ship-to-Party fields not available

    Hi Experts,
    I created a new Contract Type in one client A, copying the contract type settings from another client B.  The config in client B is working.  However, when I try testing my new Contract Type in client A, the Sold/Ship-to-Party fields not available (greyed out).
    What config did I miss?
    Thanks!

    Dear January,
    This may due to partner determination settings for that sales document type.So please go through this IMG path do the proper settings then try.
    IMG>Sales and Distribution>Basic functions>Partner determination>setup partner determination-->
    Set Up Partner Determination for Sales Document Header
    Set Up Partner Determination for Sales Document Item
    Check these settings
    Partner Functions in Procedure
    Partner Determination Procedure Assignment
    Partner Functions
    Account Groups - Function Assignment
    I hope this will help you,
    Regards,
    Murali.

  • Internal number not showing while creating customer master record

    Dear All.
    After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is  not displaying. I have set number range internally.
    Thanks..
    CG Balaji

    > Dear All.
    >
    > After creation of account group and doing patner
    > determination procedure, while creating customer
    > master record it is showing all the 4 functions of
    > partner in partner function tab page but the internal
    > number is  not displaying. I have set number range
    > internally.
    >
    > Thanks..
    >
    > CG Balaji
    Hi,
    In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
    On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
    This will allow taking INTERNAL numbers during customer creation.
    Thanks and reward points if useful

  • How to find out the account group information in customer master record?

    how to find out the account group information in customer master record?
    in which tab? thanks in advance

    Hi
    Go to XD02 and select the Extras from the main menu , you will find Account group info -> click on the No.ranges.
    reward if it helps
    SR

  • Change account groups in vendor/ customer master data

    Hi,
    Do you think is possible to change account groups in vendor/ customer master data?
    Thanks

    Hi,
    Good evening and greetings,
    Changing the account groups will redetermine the Reconciliation account, which will be creating a chaos during Audit Reconciliation. But if there is a requirement, please go through the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f534545a11d1a7020000e829fd11/frameset.htm
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Account group in the customer master record.

    Hi .
    Why we have to use the ACCOUT GROUP For customer.
    Account group differs for sold to party, ship to party, bill to party and payer.
    but when we create a sales order if we enter the sold to party automatically the ship ,bill and payer will be taken by the system.
    can any one give me the sufficient solution for this.
    thanks
    Devi Reddy
    Edited by: bareddy devi on Aug 1, 2008 5:58 PM

    Hi,
    For customer creation ACCOUNT GROUP plays a vital role.
    Based on this Account Group only, concerned Fields will be activated. Thats why, when we create a Sold to pary it will ask for much information in all the tabs, where as, for ship to, bill to and payer all these fields are not required.
    using the path : IMG -> Logistics General -> Business Partners -> Customer -> Control -> Define Transaction Dependent Screen Layout -> double click on Create Customer (sales)
    here you can activate or make mandatory or optional all the fileds which are available in different tabs of the customer master.
    And This you can do based on account groups also
    Goto T.Code OBD2, select the account group (say 0001 sold to) and you can activate make which are all the fileds required for that customer. Like this you can do for all the account groups, so whenever u create the customer master based on that account group only those fileds will be asked by system.
    For sold to party, we require all the info like sales, shipment, billing and parnter funtion. But for ship to you need only shiping data, for bill to you need only billing data, for payer you need billing also. for all these general data is required.
    And where as for your second query, when you create a sales order automatically ship to, payer , bill to will come automatically based on what you maintaine in the sold to customer master. By default when you create a sold to, partner functions will be taken as the same for ship to, bill to , payer. Then you have to create different customers using account groups shipto, bill to and payer and those customer numbers you maintain in the sold to customer master -> Sales Area data -> partner functions.
    Then whenever you create the sales order, differnt customer will be picked based on that data.
    Hope this is clear.
    Thanks
    Praveen

  • How to change the account group of a customer master?

    Would like to change Ship-to's to Sold-to's.  I know the transaction XD07, but when trying to promote a SH to SP, I receive the error
    The planned change is not allowed as the following field groups would be masked by the new account group.
    Below the error the table displays Group Name PO Box City and Address.
    How do i bypass this and successfully change the ship-to to a sold-to?

    Hi ,
        Chek out ur new account group for Sold to party ,whether all the fields in address tab is marked either optional /required. It should not be in display /supress mode then only u can successfully change ur SH account to SP account.
          I think , Number ranges should be same.
    if itz not  da same number range system will give the message ,but it will allow to change the account group.
    As I successfully worked in this issue earlier.
    As we all know, we only change the account group from lower to heigher,
    ie. sh,bp,py to SP only not viceversa.
    *rewards if it helps

  • Prob While Creating Customer Master - Error Msg "Number '0' Not defined"

    Dear Experts,
    I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
    But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
    In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom  give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22)  and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
    I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
    This prob is only specific while creating only SP and SH Customers.
    Many ThanX.

    Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
    Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
    Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
    Regards.

  • Problem with Account Group while creating a Customer

    Dear Friends,
    I am trying to create a customer with a specific Account Group. But when I try to save this customer I get an error message
    Acct group XXX uses internal no.assignment; leave blank.
    I have copied my account group (XXX)  from 001 Sold-to-Party.
    Request you to please guide me why this error is and what is the resolution for the same.
    Regards,
    Lalit Kabra
    PS : Pardon me for basic question as I am  trying to learn SD.

    Hi,
       This error means this Account group has the number range which is internal(Sold to party has the Internal assignment only). This means system gives the number automatically. If you want to use your own numbers ,them you change the assigned number range, go to "OVT0" and select the number range which is external. This should solve your problem.
    Regards
    Ram Pedarla

  • Terms of payment made optional in account group configuration of customer

    Hi Experts,
    I have made terms of payment optional in account group configuration of customer master for one time customer but it is showing me mandatory  when I am creating or changing customer.
    Is any body has any idea why this is happening?
    Thanks
    Krushnakumar Rathi

    Hi
    Select the Relevant account group
    Double Click on the Company Code data under Field status you will get another screen
    In that Screen Double click on the Payment Transactions under selection group and check the field "terms of payment" is Required entry or optional entry , mention Optional Entry
    Same as Double Click on the Sales data under Field status you will get another screen
    In that Screen Double click on the Billing under selection group and check the field "terms of payment" is Required entry or optional entry , mention Optional Entry
    Regards,
    Prasanna

  • Error message: Ship-to party 1111 not defined for sales area 1000 01 50

    Hi friends,
    I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
    When created SO, I got a error message saying "  Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
    Please advise where I missed configuration.
    Thanks,
    Linda
    Edited by: LindaSAP on May 25, 2010 5:40 PM

    Hi,
    Please check the below links
    Ship-to party not defined for sales area
    "SHIP TO PARTY NOT DEFINED FOR SALES AREA "
    Ship to party is not defined for sales area..
    Ship-to party not defined for sales area
    Ship-to party 147 not defined for sales area US DS 20
    ship to party -sales area error
    Regards
    Senya

  • Error - ship to party could not be determined

    Hi
    probably really easy error to resolve....
    have created a new contract and billing type with reference to existing ones, the contract creates correctly however, when try to bill get error message that the ship to party could not be determined.  If I use the old contract type that i referenced and the same material all is ok..
    any help appreciated
    thanks

    Hi
    Just check , who is the ship to party for that sold to party in CMR data with which you have created contract. Also Check wheather that ship to party belongs to same account group or any other different account group. So check wheather Partner determination procedure has been maintained or not correctly
    Secondly , if both SP,SH are same then check in Partner determination procedure wheather partner function SH has been maintained or not for that account group.
    Regards
    Srinath

  • Tax condition(JVAT) of ship to party is not triggering in Sales order

    Hi,
    Tax condition(JVAT) of ship to party is not triggering in sales order...
    Scenario:
    Tax condition types:
    JCST- CST Payable
    JVAT- VAT Payable GJ
    Customer Tax classification for JVAT in OVK3:
    1-  VAT 4%
    A- VAT 0%
    B- VAT 2%
    Material Tax classification for JVAT in OVK4:
    0-Tax Exempt
    1-Full Tax
    In CMR for
    Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
    Country/Name/Tax category/Name/Tax Class./Descrption
    IN / INDIA / JCST  / CST Payable / 1 / CST 3%
    IN / INDIA / JVAT / VAT Pay GJ  / 1 / VAT 4%
    In CMR for
    Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
    Country/Name/Tax category/Name/Tax Class./Descrption
    IN / INDIA / JCST  / CST Payable / 1 / CST 3%
    IN / INDIA / JVAT / VAT Pay GJ  / A / VAT 0%
    Access Seq:   JLST
    Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
    Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
    Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
    Now the sale(Shipping to) is happening in Gujarat..
    In sales order
    I entered SP:1001 and SH: 2001
    When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
    Kindly guide me where i went wrong...
    Regards
    Azeez.Mohd

    Hi Friends.
    I found the solution...
    Its customization mistake..
    Solution:
    When we have 'n' tax categories then we should have 'n' condition tables..
    I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
    then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
    with regards

  • Ship-to party 10106086 not defined for sales area 6000 40 30 error

    HI gurus,
    We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
    please help me in this we are unable to create a order.
    this is urgent.

    Hi,
    The error is Ship-to party 10106086 not defined for sales area 6000 40 30
    Here system is considering distribution chan 40 & division 30 
    Go to VOR1 and maintain like as
    Sales ogz - Distribution channel - Distribution for Condition  - Distribution chn for CUST/MATERIAL
    6000 - 40 - 40 - 00
    Then in VOR2
    Sales ogz - Division - division for Condition  - division for CUST
    6000 - 30 - 30 - 00
    Then also check you have created customer for sales area 6000-00-00
    Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
    OR
    Remove division form material master basic data tab 1
    Kapil

  • Ship-to party 147 not defined for sales area US DS 20

    Hi,
    I am getting following error while creating a sales orcer with ref to contract
    Ship-to party 147 not defined for sales area US DS 20
    Points will be rewarded for satisfactory answer.
    Thanks & Regards,
    Vinayak

    Hi,
    After maintaining in US DS 20 it is working fine.
    But normally we never maintain in US DS 20 for other transaction.
    then why it is asking for this transaction.
    we always create in US DS 10.
    is their mistake while creating a BP or any SPRO changes required.
    Thanks & Regards,
    Vinayak

Maybe you are looking for