Ship to party Jursidiction code change at line item leve in Sales order

Hell Gurus,
Here is requirement for enhancement in Sales order. For determining tax following logic is requird to modify jursidiction code of ship-to party at line item level.
after entering header details and line item, then user exit should be there(which user exit??) and i need to compare countries of Ship-from(Plant i believe) and Ship-to party(customer) if country is same, then jursidiction code of Ship-to party at line item level should be changed with value from Jursidiction code of Ship-from party(plant this value will come from <b>T001W</b>) table. this should happen before save(while entering line items, user may go and check jursidiction code change)
what i need here is which user exit is triggerd ater line item entry, and how to change jursidiction value( i believe we need XVBAP, XVBPA, might be XADRC(Jursidiction code) . if some one provide user exit and logic with structure details then it would be of great help.
hoping to get reply
Thanks in Advance
Siva

Can you check in MV45AFZB Include but i am not sure
FORM USEREXIT_FILL_VBAP_FROM_HVBAP.
VBAP-zzfield = HVBAP-zzfield2.
ENDFORM.
FORM USEREXIT_SOURCE_DETERMINATION.
set source
VBAP-WERKS = zzfield1.
set item category
VBAP-PSTYV = zzfield2.
ENDFORM.
*eject
Reward Points if it is helpful
Thanks
Seshu

Similar Messages

How to combine the line items of 2 Sales orders into 1 delivry

how to combine the line items of 2 Sales orders into 1 delivry
and their process, pre-requisites and tcode

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

Route schedule not updated in some line item of a sales order

Hi Gurus,
All order are processed through the EDI interface automatically. Order
XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
setup T-code VL52 on specific departure day thursday.
above are line item of same sales order, with same shipping point and route .
Why only some salesorder lines missing the route schedule ??
Please Help
Regards
Abhilash

When you post a query here, you need to have patience until some members go through your post. Please dont expect somebody should respond to you immediately as everybody has their own priorities.
Coming to your query, it could be due to many reasons as per the following note:-
Note 1750978 - Route Schedule does not populate on sales order
Go through the Resolutions given in the above note and check with your system
G. Lakshmipathi

Keep Quote line item numbers in Sales order

While creating a Sales order from Quote, SAP always creates line items with 100,200,300...and so on.
If quote has 3 line items say 100,110, & 120 and we create a sales order with reference to this quote in VA01. The sales order line items become 100,200 & 300.
The requirement is for Sales order to also have same line item numbers i.e. 100,110 & 120.
To retain quote line item numbers in Sales order the ABAP change will be in VOFM or user exit?

Hi,
It is not a straight forward thing. Adding data to table XVBAP won't work. It will create inconsistency. There are so many other tables involve here too, like, VBPA, VBUP, VBKD, KONV. There can be other tables too based on how your sales order is configured.
Also, modifying these tables (XTAB, YTAB ) in this user-exit may cause database inconsistency.
Regards,
RS

Sample Material in the 3rd Line item of the Sales Order

Hi,
We have configured the system in the sales order as follows.
1. Commercial Material
2. Bonus Material.(ie Free Material)
Now, i want to add the 3rd line item in the sales order as Sample with different Material number. How go about this. kindly let me.
Regards
Ravi

Hi there,
Enter the material in the sales order & change the item catg manually in VA02.
But free goods & sample materials are dealt differently..
Freegoods is entered as TANN item catg along with nornam TAN item in standard order OR.
But sample materials or free of charge items are processed through different order type FD for eg.
Even thought the item catg proposed in FD is TANN,, the whole process will not have pricing as TANN items arenot relevant for pricing.
Regards,
Sivanand

I want a push button for line items in my sales order entry screen.

Hi,
I want a push button for line items in my sales order entry screen.
How can I do so?
Thanks.

Hi Kumar ,
To have a push buttons you need to first assign a pf-status .
here a sample code for a push button and its handling :
set pf-status 'SELECT' .
at user-command .
describe table t_lpr lines w_lines .
case sy-ucomm .
    when 'SELECTALL' .
      set pf-status 'SELECT' excluding 'SELECTALL' immediately.
      do w_lines times .
        read line w_line field value w_check . " INTO W_CHECK .
        if w_check = space .
          w_check = 'X' .
          modify line w_line field value w_check.    "INTO W_CHECK .
          add 1 to w_line .
        endif .                        " IF W_CHECK = ' '
      enddo .
Thus when you say pf-status say 'select' , Double click on that and you find a screen eher you can select icons and assign a function code to it!
Hope it helps!
Much Regards,
Amuktha .

Unconfirmed line items of a sales order into account in credit management

Hi Gurus
Updated the customer orders via prog. RVKRED09.
There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure equals item 10 and 30. So my 1question is: Where is the setting that does not take unconfirmed line items of a sales order into account in credit management?
Thanks in advance
Regards
Nalini Iyer

Hi nalini
Even though , you create a sales order for that line item , but if that item is not confirmed then the value wont be considered. into credit exposure. .
But once it gets confirmed then the value will be taken into credit exposure..
Regards
Srinath

Send all line items of a sales order to IPC along with condition lines data

We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
Thanks

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

How to delete a line item from the sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx.

How to delete the line item from a sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

Can we limit the no of line items in a Sales Order

Can we limit the no of line items in a Sales Order.

Hi Atul,
You can use user exit USEREXIT_MOVE_FIELD_TO_VBAP in MV45AFZZ
Reward points pls.
Regards,
Govind.

Line item creation in sales order

Hi
I am working on User Exit USER_EXIT_SAVE_DOCUMENT_PREPARE. On saving a sales order i need to do some validations and based on the validations i need to add a line item to the sales order in the user exit.
What are the ways that i can create the line items through the user exit

Hi,
It is not a straight forward thing. Adding data to table XVBAP won't work. It will create inconsistency. There are so many other tables involve here too, like, VBPA, VBUP, VBKD, KONV. There can be other tables too based on how your sales order is configured.
Also, modifying these tables (XTAB, YTAB ) in this user-exit may cause database inconsistency.
Regards,
RS

Limitation of line items in a sales order

Dear Guys,
Kindly confirm me whether I can make a single sales order with 500 line items or not ? Again if it no then how many line items can be taken in single sales order.
Thanks and regards,
Atul

dear atul
I think the correct reply would be 999,999 because data type of item number POSNR is NUM 6, which means that it can hold upto value 999,999.
However, at the same time keep the following into consideration:
1. FI document has a restriction of 999 line items per document. So, depending on the account settings, there will be a lower limit. E.g. if each Sales order line item results in 2 line items in the accounting document, then the max. no. of SO line items is limited to 499.
2. If FI summarization is active, then the system summarizes the account postings, thus reducing the no. of FI line items. Hence, a SO can accomodate more than 999 line items. However, this means that certain line item level details will not be available to the Finance guys (which they may not like).
3. As the number of line items in a Sales order increases, the system performance suffers greatly. There are performance fixes available, but in general, it is painful to load a SO with large no. of line times through BDC's. 10 Sales orders with 100 lines each consume less system resources than 1 Sales order with 1000 lines.
rewards if it helps
siva

Delivery doc creation for a selected line item of the Sales order

Hi folks,
Can any one help me in how to create a delivery order for a selected line item of the Sales order.My requirement is the request comes from the web browser where a sales document and details of the items are shown the user select one line item and request for delivery create of that particular SO doc.I have used couple of FM to create delivery but the delivery create is depend on the schedule line dates so iam unable to figure out where exactly i can distinguish between the line items.
Example:
SO:- 11193645
Line item -1 has 2 schedule line 06/11
06/13
Line iteam-2 has 1 schedule line 06/12
so if i try to create Delivery doc for date 06/12
it creates partially for line 1 and line 2.
but my requirement is i wanted to create SO for only line item 1 as i wanted to process Del Doc for only line item 1.
If you have any idea please help me.

hi ,
You can develop a customised FM to process the Idoc data .
1. Read the Idoc data into internal table for the line items which need to be delivered .
2. Run BDC for transaction 'VL01N' ( delivery creation ) through which eliminate the line items which are not in internal table and save the delivery document
Note : Because in VL01N , you specify the sales document with respect to which you want to perform delivery hence automatically all items are copied to the delivery document .
During BDC recording , select items by " MOVING TO TOP"
and then deleting the selected item
If you face problem in BDC recording , i can help u that too .

Different ship to party for one of two line items from sales order

Hi Experts,
1. The Sales Order No.19701 is an Export Order, received from M/s. Industries & Construction, Indonesia. We have to supply all the materials on FOB Indian seaport basis.
2. However, we have to dispatch against Line Item No. 280 & 290 to one of our subvendors, M/s.Industries, sec,rabad to complete some Control Assly. as per agreed Inspection terms.
3. After completion of Control Assembly & Client's Inspection materials will be finally dispatched to nearest Seaport for seafreight.
So here i can i map this scenario from sales order to billing, ship to party for those 2 items must be sub vendor.
Thanx in advance
Madhu

Hi madhusudan
You can map different ship to party . First you need to configure customer master for the same.
Add the alternate ship to parties to customer master of sold to party, your export customer.
While creating master data for sub vendors as ship to party ,you need to maintian proper customer pricing pricing procedure and tax classification as you mentioned customer is export customer ,but ship to party seems to be domestic ,so carefully check the same. also check the shipping condition if it is separate for exports.
Then in Sales order transaction on line item data ,change your ship to party for the line item as per the the requirement.
for further processing of this scenario ,like excise invoice and ARE1 u might have lsome issues if ship to party is liable for duties and taxes and Sold to is exempt and you are drawing only one invoice for these 2 separate deliveries. pl check on the same.
I hope this helps
Revert for any queries
Regards
Mandar
Edited by: Mandar Deshpande on Apr 13, 2010 11:04 PM

Ship to party Jursidiction code change at line item leve in Sales order

Similar Messages

Maybe you are looking for