Ship to party should be editable for export sales org only

Hi,
i am copying quatation to order and that time ship to party is coming non editable.
i want to make this field editable specific for one sales organisation only so pls help me in this.
Edited by: Monty garg on May 19, 2011 6:37 AM

Dear Monty,
The Ship-to-Party editable is being controlled by the Partner function assignment settings.
If you want to restrict the change of Ship-to-Party in the Sales Order then the setting needs to be done in the following path
SPRO--> Sales and Distribution --->Master Data -->Basic Functions -->Partner Determination -->Set Up Partner Determination --->Set Up Partner Determination for Sales Document Header. Here for the PDP select the partners in the procedure and against the Partner Function SH maintain the tick against Not Modifiable.
Please note this depends on the PDP assignment to Sales document type and not on the Sales Org. If you have separate account group PDP and Sales Doc type for the Export sales then you can control based on the above settings.
Regards,
Karthik Krishnan

Similar Messages

Ship to party should be editable and Non-Edutable for Diff sales org.

Hi,
When i create SO with Refto QT then i want Sold to Party Field should be Edtable for Domestic sales org and non-editable for Export Sales org.
so pls help me on the same.

Hi,
Hi,
Go to SE16N >> Put table TPAER
Tick mark to Maintain entry ( If it is display mode put command &SAP_EDIT and enter)
Maintain sales document procedure TA and partner function SP and execute
Then remove X from not changeable column and save
Note : After this you have to block VOPA - Partner determination other wise some one run this t-code then X indicator is reset automatically as it is defaulted by program.
Kapil

Sold to party field should be editable and non-Editable for diff sales org

Hi,
in creation of SO,i want SP field should be editable for Domestic sales org and Non Editable for Export sales org.
please help on this.

Dear Mohanty,
In sales order, for domestic sles SP is editable - It is Normal process.
Non Editable for Export sales org.
In this how user will enter the sold to party while creating sales order.
And did you create export customer classification in Sales org rather Distribution channel.
Regards,
Mani

Ship-to party 10106086 not defined for sales area 6000 40 30 error

HI gurus,
We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
please help me in this we are unable to create a order.
this is urgent.

Hi,
The error is Ship-to party 10106086 not defined for sales area 6000 40 30
Here system is considering distribution chan 40 & division 30
Go to VOR1 and maintain like as
Sales ogz - Distribution channel - Distribution for Condition - Distribution chn for CUST/MATERIAL
6000 - 40 - 40 - 00
Then in VOR2
Sales ogz - Division - division for Condition - division for CUST
6000 - 30 - 30 - 00
Then also check you have created customer for sales area 6000-00-00
Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
OR
Remove division form material master basic data tab 1
Kapil

Error message: Ship-to party 1111 not defined for sales area 1000 01 50

Hi friends,
I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
When created SO, I got a error message saying " Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
Please advise where I missed configuration.
Thanks,
Linda
Edited by: LindaSAP on May 25, 2010 5:40 PM

Hi,
Please check the below links
Ship-to party not defined for sales area
"SHIP TO PARTY NOT DEFINED FOR SALES AREA "
Ship to party is not defined for sales area..
Ship-to party not defined for sales area
Ship-to party 147 not defined for sales area US DS 20
ship to party -sales area error
Regards
Senya

Ship-to party 1600 not defined for sales area 1000 10 20

Hi Friends,
I am making inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
Any pointer will be rewarded.
regards

in mm02 i have already changed the division as 00 but still getting error(looking quite strange)
same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
same error.
Any other inputs.
Regards
Edited by: Amit Kumar on Oct 29, 2008 8:39 AM

Ship-to party 147 not defined for sales area US DS 20

Hi,
I am getting following error while creating a sales orcer with ref to contract
Ship-to party 147 not defined for sales area US DS 20
Points will be rewarded for satisfactory answer.
Thanks & Regards,
Vinayak

Hi,
After maintaining in US DS 20 it is working fine.
But normally we never maintain in US DS 20 for other transaction.
then why it is asking for this transaction.
we always create in US DS 10.
is their mistake while creating a BP or any SPRO changes required.
Thanks & Regards,
Vinayak

Profoma invoice for Export sales from EOU plant rounding problem

Hello,
While creating profoma invoice for Export sales from EOU plant according to standard Tax procedure TAXINJ excise duties appears as JMOD , JECS, JA1X. But due to legal implication we have to bifurcate them in following
BCD
CVD
ECS on CVD
SEcess on CVD
ECS on total duty
SECess on total duty
Additional CVD
Now because of rates get rounding of total does not match with bifurcated duties. The duties should match as per below
JMOD = BCD + CVD + Additional CVD
JECS = ECS on CVD + ECS on total duty
JA1X = SEcess on CVD + SECess on total duty
Regards,
Nimit

You can achieve this with standard functionality, but you will have to make some configuration change:
- Create the new movement type
- Create the new MM account assignment
- Create a new schedule line category
- Create a new item category
- Create the assignment of the new schedule line category to the / a (new) item category.
Maybe you have to create a new item category group to ensure that the proper item category in the sales order is being determined.
Around user exits in MM in account determination: I'm not aware of any (good) ones, but you might want to take a look at the Business Transaction Events (transction FIBF). These are also a kind of user exit and might provide the functionality you are looking for.
If you can't accomplish the requirement through an enhancement (user exit, BAPI, BADI, BTE) you might want to consider using an intermediate G/L account during the Post Goods Issue. And then during the release to accounting doing an accrual to the "correct" G/L account, since in the (standard) Revenue Account Determination you can use all kinds of criteria.
Regards,
Jan Pel

Creation of RG1 for Export Sales

Hi,
Frends,
For Export Sales Customer wants to create RG1, but i dont know how to create that can u pl send me some tips of creation of RG1.
Thanks and Regards
Babu Rao

Hi Babu Rao,
RG1 register is a register of Daily stock account. Whatever stcock you produce n move to warehouse specifically for excisable finished goods, RG1 captures all these movements of material to your warehouse/store. And thr is standard program given in by SAP to create RG1. Mostly, u dont need to create a Z report for that.
Rg1 consists of fields like
for matl XXX -
closing bal(quantity till last day);
quantity mfged today;
total quantity;
excise duty payable on them etc
By T code J1iex u will be able to create the RG1 or some other registers. then update the entries in the registers(then registers will show new data)
update registers- j1i5
extract data- j2i5
print register- j216
in this sequence only. because this is the procedure for maintaining any register. In each code, u will find selection criteria, n need to choose register that u intend to maintain.
If u need to create RG1 specifically for exports' use tables :
vbrp, vbrk, konv, kna1
j_1iexchdr (excise header), j_1iexdtl(excise item), j_1imtchid(for matl chapter id)
from j_1iexdtl(excise item), u can find tables of excise values.
from vbrp, fetch the document no., matl number
hope this will help you.
Reward, if it helps.
Prashant

JV for Export sale

Freinds,
Do we need to create JV using J1IH for Export sale, Credit and Debit memo?
Please explain ?
Thanks

Same as in Domestic sales, Export sales too have Excise Invoice to capture the qtty / Excise duty involved in Exports.
For
Export sales, Excise Invocie will be created in J1IIN- with Excise type: LOU- Letter of Undertaking / Export under bond (as per client req). Here There will be no accounting entries. Only Quantity wil be passed to register.
after that ARE-1 document will be prepared according to Excise law wrt: This Excise Invoice.
Function Module: J_1I7_USEREXIT_DUTY_IN_EXPORT, code has to be include as
SUPPRESS_CALCULATION = 'X'
Credit Memo: Client is issuing Credit note to the customer, If Client has supportive doc's to avail the credit, then Excise JV has to pass through J1IH
Debit memo: Almost like regular sales, there will be no physical delivery happens, so to adjust the debit note entries, need to Excise JV, through J1IS - OTHR/J1IH - OTHR.
(make sure that account determination in line with Excise rules)
Hope it helps

Unable to co create Bond for Export sale

Dear Experts,
We are dealing with Non exciseable finished goods.For Export Sale when i try to create Bond in J1ibn01the system is showing the error messege "For object J_1IBOND , number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
So where to make the required configuration.
Regards
JP

HI
Bond number is entered or referred only in ARE1 and not in any sales document.
Check with your client regarding ARE1 whether they are creating it or not for the non excisable goods when exporting
regards

How RG1 reg update for export sales?

Hi,
Iam doing the Export sales. Iam doing it export under bond. Is it necessary for update RG1 for Export sales? Wt is the process for updating RG1 for export sales?
regards,
jyothi.

RG1 for exports will be updated, similar to regular domestic sale. The process to update register is provided in link & menupath below:
Link: http://help.sap.com/
Path: SAP Best Practices --> Baseline Packages --> Based on SAP ECC 5.00 --> Select Country: for eg, Localized for India --> Technical Information --> Building Blocks --> Select Country for eg, India --> Excise Periodic Processing
Hope the above is helpful.
Regards,
Rajesh Banka
Reward points if helpful

For a sales org, I need to get a file of all materials listed to each sales district.

Hi,
I'm new to SAP, so I figured that best way to learn is to ask questions. For a sales org, I need to get a file of all materials listed to each of their sales districts. They are trying to see how often some materials are repeated amongst the sales districts. Any advice? Can this even be done? They have many sales districts.
I appreciate any help that I can get on this one.
Thank you so much in advance!

I think you are asking the question in wrong forum inside SCN, this is SAP business warehouse forum. You will have to shift this question to SAP ERP Logistics - Material management forum.

Make ship to party window un editable in VL01n and vl02n

hi all,
when we go to vl02n. after entring delivery number we go to next screen. there is one address button near ship to party field. when we click on that button, address displayed is editable. is there any user exit or badi by which we can make it uneditable for vl02 and vl03n transaction only.
thanks!!
Narendra

no reply

For LUMF - BOM, Plant field in Sales Order should be editable for TAP

Dear Gurus,
I have the following requirement.
Requirement...
TheComponent level BOM (LUMF) should be exploded in sales order with one by default plant when iI enter the main component in Sales order but if I want to change the plant of main item manually system should allow me in order change mode. And this changed plant to be determined automatically for all the components of that BOM.
As we know if we maintain the BOM at component level we will use the Itm Catg Grp "LUMF" so the pricing will be determined on the component level.
In CS01 we maintain the BOM for a main item. I have followed the same process in CS01 by entering Main Item material, Plant and BOM usage (5). whenever i enter the main item in sales order it explodes correctly with components, quantity and Plant.
The Plant field for main item (TAP itm Catg) becomes gray. But now my query is that if I want to change the plant of main item system is not allowing me as I have created BOM for a specific Plant. Same Bom I have maintained with other plants also
I know that We have one more option in CS01 like we can create a BOM without entering Plant also. But before I doing it for trial and error I want to know whether it will work for my latest requirement.
And what is the Group BOM ? how to use it? will it be helpful me in this requirement?
Please help me for the issue, I need to configure it as soon as possible.
regards,
Vojas

Dear Kapil,
Thanks for your suggestion i followed it also but yet I am facing the same problem.
I did as follows
I extended the Main item and components to the different plants.
And also created the same BOM for different plants in CS01.
After doing this if I create a Sales order and enter the Main Item with quantity system asks me for the Plant to explore the BOM, as i enter a plant BOM get explodes and the plant for main item becomes gray which i dont want. Any how I want the this plant field for main item in editable mode.
Let me explain my requirement in short
I maintain the LUMF BOM (Pricing at component level) .
once I enter the BOM material with quantity system should explode the bom with one plant by default. and in change mode of sales order the Plant for main item should be editable instead of gray mode. Becoz decision can be changed later on the delivering plant location.
Please suggest me. Its a high priority issue for me.
regards,
Vojas

Ship to party should be editable for export sales org only

Similar Messages

Maybe you are looking for