Ship-to party to copy from contract to service order

Is there a way to copy the ship-to party from the contract (not from the customer master) to the service order when creating the service notification and service order with reference to the contract?

Hello Sylvia,    Can you please tell me, how could you achieve the requirement of creating the service notification and service order with reference to the contract.
Has it been done by manually using any tcode or customization or it did involve technical coding ?
Please let me know the details of  the process followed in any case.
Thanks in advance,
Vishnu Priya

Similar Messages

  • Price not copying from contract to maintenance order in IW31

    Hi Gurus,
    I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
    I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
    Thanks in advance!
    Best regards,
    Karun Kumar

    hi
    i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
    regards
    thyagarajan

  • VKGRP should copy from contract to sales Order

    Hi Guru's
    I have a problem related with copy control from contract ot sales order. sales group should copy from contract to sales Order while Sales order reffers to customer Master. In contract sales group comes from Customer Master, after saving the contract if i change the sales Group and create sales order with reference to contract. sales group doesn't get updated from the contract. system refers customer master only.
    Any suggestions
    thanks,

    Hi,
    I see that you can address this in following ways.
    1. copy control between Sales order - Contract - header level routine.  Here you may be able to influence the copy of the customer group details.
    2. You can use the user exit which will trigger during Contract creation ( Move field to VBAK) or you can think of using save_prepare user exit.
    Thanks & Regards,
    CLN

  • Net weight of the material is not copying from contract to sales order

    net weight of the material is not copying from contract to sales order?
    plz help me

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Exchange Rate is copied from Contract to sales order

    Dear SD Guru,
    Good Day!
    I have an issue with the currency. The sales order picks up the exchange rate in the contract and it might not be correct.
    The contract was created a year ago and the sales order is still referring to the old exchange rate because the pricing date in the sales order is copied from contract.
    Is there any way to not copy the pricing date over to sales order and let the sales order picks up the currency table OB08?
    Thanks,
    CC

    Hi There,
    What i suggest is to create one routine at Item level in VOFM and maintain that routine in VTAA copy control at item level.
    In sales order the details are copying based on your copy control settings. Please also ensure is there any existing routine for determining the new values from sales order.
    Thanks,
    Raja

  • Service details are not copying from contract to Maint.Order

    Dear Experts,
    I was doing a service contract cycle, with the following steps.
    1. Created a Service contract, in T. Code ME31K.
    2. Given all the details in the Header data of the Contract.
    3. Mentioned the, Item category as D (Service), Account Assignment as F (Order), short text, Target Quantity, Material group, Plant and Storage Location in the Item Overview screen.
    4. Given the Service Number and Quantity, Gross Price, Cost Center and GL Account.
    5. Saved the Contract.
    6. After released the Contract in T. Code ME35K.
    7. Then created a Maintenance Order through T. Code IW31.
    8. In the Operation Overview screen of the Maintenance Order, the control key is given as PM03 and clicked on External button of the Maintenance Order.
    9. In the External Processing Operation screen the Contract Number and line Item is mentioned in the Agreement Field.
    10. System given a message Data copied from contract.
    11. All the data copied excepting the Service details of the Contract.
    Here the Service Number and its details which were mentioned in the Service specifications of the Contract are not getting copied from the Contract.
    What could be the reason for that? Did I perform the transaction properly?
    I have searched the forum earlier for the same but could not get any required information.
    Can any one help me out on this??
    Thanks and Regards,
    Praveen
    Edited by: b praveen savan on Jan 31, 2008 2:33 PM

    Select the services from the service selection button, then click on current spec, all the services which are under contract will be displayed. select your required services or copy all services.(Click on adopt services)

  • Condition Type is not copying from contract to sales order

    Dear All,
    The value the i am giving in the sales contract is not copying into sales order. Sytem again asking to enter the value.Is there any setting to be done forthat.
    Regards,
    Suresh Yadav.

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • PO number  not copied from Contract to Sales order

    Hi Gurus,
    when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
    also the PO item is not copying from contract to sales orde.
    Could u tell me the reason.
    Cheers,
    Sumith

    Hi Sumith,
    I'm not sure though but try this one this might jus help.
    Go to VTAA,
    select the target & Source doc type.
    Go to header and check the COMPLETE REFERENCE CHECK BOX,
    Which says it copies the whole of the reference doc from the
    source doc to the target doc.
    I jus hope this will sole your problem.
    Cheers!!
    Nitin

  • Item number to be regenerated when copying from contract to sales order

    Hi,
    I am copying items from contract to sales order, say there are 10 items in contract. I copy all items leaving 5th & 7th item in contract. The numbers in sales order has to be in sequence (regenerated leaving the 5th & 7th line item) rather than it is copying the line item number as in the contract. Can any one kindly suggest me how to handle this in sales order.
    Thanks
    Ghanesh

    Hi,
    In VTAA
    QT to OR at header level
    REMOVE TICKMARK OF COPY ITEM NUMBER
    Then system will genrate new item numbers in targer document.
    Kapil

  • Ship to party not copied from PR to PO for item category D

    Gurus,
    Am populating unloading point and ship to party in a PR for both item category standard (" ") and service ("D"). However during PR conversion to PO, both these fields only get copied for item category standard and NOT for item category service. What is the correct set up so that these fields are copied from PR to PO during PR conversion ? Any customizing point i missed ?
    Cheers
    Olivier

    HI,
    I think this is the wrong forum to proceed with this.
    SAP Community Network Forums » SAP Solutions » SAP Solution Manager
    Regards

  • Unloading point and ship to party not copied from PR to PO

    Gurus,
    Am populating unloading point and ship to party in a PR for both item category standard (" ") and service ("D"). However during PR conversion to PO, both these fields only get copied for item category standard and NOT for item category service. What is the correct set up so that these fields are copied from PR to PO during PR conversion ? Any customizing point i missed ?
    Cheers
    Olivier

    HI,
    Please see note:
    118008   >  MM-SRV: Goods recipient and unloading point missing
    unloading point can not be used in MM-SRV.
    About ship to party I was not able to find any information. I would recommend to enter a ticket at SAP, so that an expert can have a look into your system.
    Best Regards,
    Arminda Jack

  • PO no.& PO dt. to be copied from contract to sales order at header level??

    Hi,
    I have a requirement, Purchase Order number & date has to be copied to the sales order (header fields below the SP & SH fields) when i create a sales order with reference to a contract. Can you tell which routine to be used in copy control??
    Thanks
    Ghanesh
    Edited by: Ghanesh Visu on Feb 16, 2010 9:17 AM

    Hi,
    I as far as my understanding you have to create new routine or copy from existing and modify that
    and maintain condition P.O & Date should not be change.
    Kapil

  • Copy PO Number from contract to sales order

    Hi,
    My clients requirement is that when i create sales order with reference to contract the PO Number should be copied from contract to sales order other wise we have to enter PO Number every time while creating the sales order.
    Please guide me.

    Hi
    Small change in the program will copy the PO number from Contract to sales order.In case need take help of ABAPer
    Data which is not copied
      LOCAL: VBKD-FKDAT.
      LOCAL: VBKD-FPLNR.
      LOCAL: VBKD-WKWAE.
      LOCAL: VBKD-WKKUR.
      LOCAL: VBKD-DELCO.
      LOCAL: VBKD-BSTKD.
      LOCAL: VBKD-ABSSC.
      LOCAL: VBKD-BSTDK.
    In your data declaration, you have
    LOCAL: VBKD-BSTDK
    Please comment out this line and your purchase order should be copied over. You might also have to comment out some of the other fields which are declared locally if you wish to copy them as well.
    Ramesh

  • Billing Plan Data not getting copied from Contract to SO

    Hi ,
    I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
    Please guide me on how can this be done.
    Regards,
    Madhav

    Hi,
    plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
    you can either use routine-401 or 402

  • Ship to party is not comming same in Sales order from Quotation?

    Dear all,
    Here I have a scenario,
    (1) I created 1111 sold to party and extended fot SH,BP,PY and
    (2) I created 2222 ship to pary is only a SH not others.
    Now when i enter 1111 for sold to party and 2222 as a ship to party in Quotation and when i am going to create a order with reference to that Quoatation the system pick up 1111 as a sold to party and also ship to party same in order.
    Why?
    Can anybody guide me
    Thanks
    Jayesh

    Hi Jayesh,
    If I understand you correctly, you want that when creating SO from Quoatation
    the Ship to Party also follow/copy Ship to Party from Quotation, right?
    Just to confirm with you, when you creating SO reference from Quotation, you
    use copy/follow-up function, am I right?
    You can do this by setting in configuration of Copy Control (like mentioned by Hui).
    Step as follow :
    1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions
    2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
        Party value from source document and use it in current document
    3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
        IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions-> Define Copying Control for Transaction Types
    4. Here you set Copying Routine for your transaction types (put name of your Badi
        created in step no. 2)
    Or alternatively, you can set it on access sequence in Partner Function
    Ship to Party in configuration. You can define access sequence the Ship
    to Party is taken from Preceeding Document -> Ship To Party
    1. Go to Partner Function access sequence :
        IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
    2. Create new access sequence with following entry :
        - Source COM_PARTNER_A (PrecedingPartner)
        - Check Mapping for Partner Being search
        - Partner Function in Source  = Ship To Party
    3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
       Type.
    Tell me if this is what you looking for
    Gun.

Maybe you are looking for