Shipment Carrier Related EDI SAP question
All,
We started work on automating sending/receiving the Carrier Related documents from SAP at out end through EDI.
Here's my understanding :
Load Tender : EDI 204
Carrier Accept/Reject : EDI 990
Shipment Status : EDI 214
Freight Invoice : EDI 210
I know that for EDI 204, we can use SAP IDOC - SHPMNT05. Could someone please guide me on whether my understanding is correct and
which SAP IDOCS to use for these EDI docs.
Thanks.
> No i wanna my carrier as a SAP BAP HR .
@PK..it is not a New Technology but a New Airlines which was introduced by SAP .
>But dear gurus from india , who has experience more than 4 years please suggest me ..
@Siegfried.. the criteria to reply to this thread does not suit you.
1.Gurus from India only.
2.Only 4 yrs Experience
>Over all i am very confused related to my new search criteriaa ..
Yep,New Version of SDN has changed its Search functionality and there is a [lot of discussions|What happened to SCN search?; going on in [Suggestions & Comments|SCN Support; forum, have a look into it.
> if a glass is half filled and half full .......try to see the full part ??
again you missed out something here which made the confusion. half filled with air & half full of water Brittania 50:50 right?.
Cheers
Andrew
PS:Edited with a SIMPLE EDIT SW called @FUN and copyrighted only for Coffee Corner.Take it in the [right spirit|http://www.whiskymag.com/whisky/brand/glenfiddich/whisky651.html] .
Edited by: Andrew J on Jul 3, 2009 9:35 AM
Similar Messages
-
Automatic carrier selection in SAP TM
Hi all,
in automatic carrier selection in sap TM how we can assign default carrier to freight order based on material
what are the possible ways to do this like BRF+ or any ?
thanksHello Keser,
You can try to use a selection profile for the CS(using a condition). Maybe its not the best option due to performance issues the condition based filter.
Just a question: what happen if the FO has more than one material?
Kind Regards, Marcelo Lauria -
Issue in creating Credit Note for road carrier invoice from SAP TM system
Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1) 1) Create Freight order with Amount 20,100
2) 2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3) 3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4) 4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5) 5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6) 6) In transaction MIRO, Credit Memo was created against the freight order.
7) 7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8) 8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9) 9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu GuptaHello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria -
Why doesn't my iPhone 4 have an 'Internet tethering' options? Is it carrier related or iOs related? Please help me find the solution for this. thanx
Personal Hot spot
http://support.apple.com/kb/HT3574
Understanding
http://support.apple.com/kb/HT4517
Trouble Shooting
http://support.apple.com/kb/TS2756 -
Queries related to sap Basis.
Dear All
Can any body tell me queries related to sap Basis.
Which data sources need to be installed and what are the cubes and dso's which gives information related to SAP BASIS.Hi,
It might not be installed in ur system Thats y u are unable to find.
Goto rsa1->BI Content ->Infoproviders by infoareas....There u shall find 0DBH infoarea. It is Database performance.
In my client Basis people are using some of the cubes from this infoarea.
But datasources are generic.
Hope this helps.
Regards,
Guru -
I have a query relating to SAP, specifically when using the Create New Session button. In the past when using this button, it has always created a new SAP session with the window displaying the SAP Easy Access User Menu... front end, with all my favourite transactions listed. However, recently this user menu has disappeared and the window is blank, meaning I have to type the transaction in the top left box, which, whilst not preventing use, is a little annoying and awkward!
I dont believe I have changed any options recently and can find no settings that look like they would bring the user menu back but it would be really useful if it did! (It is probably worth mentioning that this only occurs when creating a new session; when starting a new SAP session in the first instance, the user menu appears...)
Please help me out
Many Thanks,
SunnyHi,
SAP GUI version - 7.10
i am using a desktop, tried logging in another desktop ,same problem.
Recently there is a HARDWARE migration occured , might be this also effects the settings ?
please Advise.
Sunny -
Hello,
I am from India. I have completed BSc(Hons) Computing from University of Wolverhampton(UK). Also I have two years of experience as SAP ABAP Consultant. I have completed SAP ABAP Certification. I wanted to gain more knowledge in SAP. I am looking for any master or degree program in SAP ERP systems in Canada. Please suggest if any university or college provides courses related to SAP in Canada. Thank you in advance.
Regards,
Uday MenganeGot the info from SAP.
-
Hello Professionals,
I'm looking to pursue my Masters degree (MSc) preferably in courses related to SAP.
What I'm looking for is which course should I opt for, MIS or is there any other course related to SAP?
Where should I go for doing my MSc degree and what is the job scope for an SAP Masters degree?
Kindly advise.
Many Thanks,
Leonel.i did not get, i closed one.
-
Routines related to SAP SD module
Hi can anyone give me some links related to SAP SD module plz. I am new to routines, please help me out.
Thanks in advance.
I apprecieate ur helpHere are some links related to SD Module.
http://www.sap-img.com/sap-sd.htm
http://help.sap.com/saphelp_46c/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm
Regards,
RIch Heilman -
Under which group i have to post issues related to SAP - Basis
Hello All,
Can some one tell me
Under which group i have to post issues related to SAP - Basis
Thanks
BalajiHi,
As such there is forum which is dedicated to basis. But there are number of forum where you can post issues depending upon what type of issue you have e.g.
If you have issue related to database then you can post in SAP on Oracle, SAP on DB6, SAP on MaxDB etc.
If it is related to OS then SAP on Unix, SAP on window etc.
If it is related to ERP/EHP upgrade then SAP ERP 6.0 upgrade, Enhancement Package installation.
If its related to netweaver then on SAP Netweaver administrator, SAP netweaver platform.
Thanks
Sunny -
Hi All,
Please explain me what is BC SET in SAP Basis which is related to SAP Security.
Can anyone explain in detail...
Thanks Much.
Swapna.DHi
Prerequisites
You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
This Customizing request is a change request with which you can copy and transport the changed system settings.
The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
You can subsequently edit BC Sets created from transport requests.
Procedure
Enter the Customizing request number and Continue.
You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
· green traffic light: The transport object can be put in the BC Set.
· yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
· red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
· Cancel: The transport object cannot be interpreted or put in the BC Set. -
What is ADM methodology? how it will related to SAP R/3 system?
hello friends,
What is ADM methodology? whoes product it is? and how can we use it to SAP R/3 system (for implementation or support).
What is the main difference between ASAP and ADM methodology.
Can anyone have an knowledge on ADM methodology? Pls send the information or document to email: [email protected]
thanks in advance,
will be rewarded,
Regards,
Srinu.KHi Manish,
thanks for the reply. But i don't think ADM what it stands for.
As per my knowledge ADM is Application Development and Maintainence (ADM) methodology.
But, i don't have much knowlege on that and how this will related to SAP R/3 system.
Can anybody have knowledge on ADM? how can we use for SAP R/3 system?
pls, do the needful,
Regards,
Srinu.K
Message was edited by:
sapsrin -
Hi ,
I am looking for some document or some website where I can get information on the relation between SAP Modules. For example, How SD, MM, PP, FI and other modules are related to each other in what functionality and how, etc. Diagram or even document is fine.
Pls. help me out.
Regards,
VaishaliRaj
Please search the forum before posting a thread
Edited by: Pravender on Aug 2, 2010 1:05 PMHI VAISHALI,
Pls see below links u will get help--
http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
Relation between SD and MM modules - Table name which links 2 modules
hope it helps
Thanks,
Nilesh Pathak -
Where can I download .Sim files related to SAP BI?
Hi,
Can any one tell from where can I download .Sim files related to SAP BI?
I have searched this forum but no where I can the sim files.
Please help me to get those files
MuthukumaranThe same problem.
-
Case studies related to SAP-PS
Hi All,
What is case studies related to SAP-PS module. If anyone has kindly let me know.
RegardsHi Virendar,
Case studies means from where I can get the business scenario related with SAP PS for various industries.
Regards
Maybe you are looking for
-
In ALV report is possible to display the subtotals in separate column
Hi, I have made one ALV report, i need to show the subtotals of ekpo-brtwr (Gross Value) grouped by or sorted by ekko-ebeln (Purshasing Doc) but in separate column not at the end of the line items of each purshasing doc any idea how can i do this?
-
It shows me 5 or so emails when asking for the id and password. Even if I enter mine, it will not work. Seems like a virus or something. This pops up every 3 minutes or so
-
JAVA 1.6.0_22 UPDATE CREATED NEW ERRORS IN DISK UTILITY.CORRECTED POST
THIS IS A CORRECTED VERSION OF MY ORIGINAL POST AS IT MIGHT HAVE HAVE BEEN UNCLEAR. Permissions Verify and Repair Messages after Updating Java SE 6 to 1.6.0_22 Posted: Oct 21, 2010 3:49 PM THIS IS A CORRECTED VERSION OF A POST THAT I ALREADY MADE. AS
-
Can I tell when/if a software is used by a user....
We are looking at reducing the number of users that use Office Professional, down to Office Standard, and therefore need to validate who actually uses Access in the Pro version, so we can reduce it by those that don't use it. Is there a way to use SC
-
Hi, We are having a problem with our application that we loose our bind parameters after a while. There is a view object that has a bind param called p_id. Which we set by using setp_id and perform executyQuery inside coding. If we leave the page alo