Shipment Cost Relevance field grayed out. Possibility to make this editable

When we create a TD shipment document, based on the shipment type control data, the value of the field Shipment cost relevance is updated.
This field is always grayed out, where there is no option to edit.
When we check the standard description, we can see that this is an proposal for shipment cost relevance and can be modified if required.
Is there any such possibility to do so (other than by customising the shipment type parameters), if so, please proivde the process.
Thanks & Regards,
Pavan.

Use t-code T_57,
select shipment type then click on shipment cost relevance, make sure is there tick mark for header.
if any quiry revert back.
kapil

Similar Messages

Shipment Cost Relevant

Hello guys,
Do you know what are the criteria so that a shipment can be considered as shipment cost relevant? (so that the ShipmntCostsRelv field is ticked)

Try this configuration link. it tells you how to configure the Shipment cost.
http://help.sap.com/bestpractices/BBLibrary/Documentation/G82_BB_ConfigGuide_EN_DE.doc
The Pricing Procedure tells us the condition types which can be used for the shipment cost.
If you assign it to the Shipment, then while creating the shipment cost, you will be able to use the condition types assigned to it for creating the cost.

Shipment cost relevance checkbox

*Hi Gurus,*
*I got a recent issue with shipment cost relevance check box. My shipment type is shipment cost relevant and by customizing it has been set. while creating new shipment always this box is defaulting ticked .But user reported few shipment Nos. where it has not been ticked and am not able to find out the actual reason. While creating test case it is always working properly. User confirmed there is no manual untick of the checkbox. Can you suggest me any probable reason why this checkbox box is getting unticked automatically?*
*Thanks in advance*

Check in T_57 to see if you have activated the Shipment type under the Header and Leg whichever you are looking for.
There can be two reasons:
Check if the shipment is a old one.
Check if he is using the right shipment type.

TS1559 Wi-Fi on my iphone4s is grayed out and I think this happened after the update 7.0.4. I went to apple store and they turned me down that there is no support in the 2nd year. Extremely disappointed and no way except to pay and get replacement. Pls ad

Wi-Fi on my iphone4s is grayed out and I think this happened after the update 7.0.4. I tried all possible solutions through apple online support and then went to apple store as a last resort and they turned me down that there is no support in the 2nd year. Only option is to pay 160 pounds and get replacement. When I argued further, they said that if I had bought the iphone directly with them, they would replace me without any cost. This is even more frustrating.
THIS IS TOTALLY UNFAIR as its not my fault. If the release of faulty 7.0.4 software is timed in my 2nd year of contract and since I didnt buy the iphone directly from Apple, how is it fair to ask me to pay for replacement. Its not my fault after all.

Because you are outside the one year hard ware warrenty, Apple covers for the first year on their dime, if you had a two year contract why not make sure you have a two year insurance on your phone?
Either way as I can see/assume you are from europe you can look at your consumer laws to see if you qualify for anything there, beyond that it isn't the software that broke the device, it's a hardware failure because thousands upon thousands are happy and content with iOS 7.0.4

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I use premiere and cannot access all of the transitions, they are grayed out. Why is this?

I use premiere and cannot access all of the transitions, they are grayed out. Why is this?

Maybe you have them "filtered" at the top of the FX Window (Icons)

Cost Centre Fields Grey out in PO

Dear Experts,
I have one scenario while we create Purchase Requisition with account assignment category K then create Purchase Order with reference of Purchase Requisition but in PO system allow to change the Cost Center.
How can i restrict or system not allow to change the cost center or fields grey out.
Regards
Aamir

Dear Aamir,
The setting of screen layout SPRO>Materials Management>Purchasing>
Purchase Requisition>Define Screen Layout at Document Level can only be
done for Account Assignment Category however you are unable to do it for
Cost Center or G/L account or any other Account Assignment fields.
The problem is that the field of the subscreen account assignment are
set under the transaction spro->Mm->purchasing->account assignment->
maintain account assignment categories. So the functionality you ask for
is not available. So in the standard is not possible but you might try to use
BAdI ME_PROCESS_PO_CUST. I haven´t try it before, but as far as I can see,
other customers have used it for a similar purpose.
Best Regards,
Arminda Jack

Password field grayed out when trying to connect via BeX

Business Explorer SAP Logon screen password is grayed out and user can not type in. We've ruled out the possibility of SNC being turned on for this BI QA system connection.
User gets the following error message:
Missing SNC_LIB=... in connect_param in RfcOpenEx
Any ideas how to activate the Password field or what this error message means?
Any help is greatly appreciated!
Thanks in advance.
Edited by: Ivan Colakovic on Jan 28, 2008 12:19 PM

Hello,
I got the same problem when I tried to use BEx Analyzer to connect a BW system and I also tried to solve the problem followed your guide, but failed. I am wondering what is SNC Library and how and where I can find it's content, after this I can put it to SNC_LIB=.
Thanks in advance

Profit Analysis field grayed out

Hello All,
I am trying to configure the "Activate Project Management in Controlling area" in PS. When I am trying to activate the components, the Profit Analysis field is grayed out. Since we are implementing COPA at our current client, I assume that this component shopuld be active.
Please let me know how do I activate this component.
Thanks
Sarang

Hi refer this post. CO Consultant is right person to answer.
Re: Maintain operating concern: OKKP
Regards
Nitin

Address Field grayed out, not showing up

How very odd. This morning, the *address field* in each of my 2,000 Apple Address Book contacts have disappeared. I verified that the Address Field (Preferences: Template: Address) was checked, and it's grayed out. Which means those fields should be showing up. But it doesn't, not in any of the contacts. I've repaired permissions and restarted the Mac, but still no addresses.
Any suggestions? Am I missing some obvious feature that allows one to see the actual street address in AB? Here's a pic:
http://www.braintoniq.com/dropbox/abglitch.jpg
Message was edited by: braintoniq

Karsten,
I used imToo flv converter. The program works great.
After converter the files, I did the following.
1. Open iMovie
2. Create new event
3. Import Movies into that new event
4. iMovie then loads the video file and "generates thumbnails"
5. At this point everything looks good, but if you try to edit the video, there is no preview in the upper right window.
I did some more research on this and I found others with the same problem. I think it is just a bug in the program and there is no way to fix it.
Thanks for trying though.

Mail on OSX 10.7.5 has incoming mail server field grayed out

Trying to configure my iCloud email using Mail in OSX10.7.5 and in the settings the field for incoming mail is grayed out, yet every time I try to save to exit that window, it gives me an error message that it needs an incoming mail server. Can't enter it because I can't get into the field, which is showing po2-imap.mail.me.com Any thoughts on how to remedy?

I tried this and it entered the same info that was there and the incoming mail server field is still grayed out and I still get the "The incoming mail server cannot be empty" message when I go to exit the iCloud account window.

I/O field grayed out after check box checked ( Dynpro)

Hi ,
I have dynpro dialog screen with several check boxes linked with input/output field
When check box is checked the I/O field is editable when check box is empty I/O field should be grayed out.
I am trying to find the way how checking the check box can trigger the change of attribute of I/O field.
The IO field should be gray out after checking check box without hitting enter or any other button.
Please advice
Chris

Hi ,
Thank you for your answer. I was missing Functional code of my check boxes.
Now i have still issue my I/O field do not turns in gray ( only output) In loop
I dide like you said ( this is example from my PAI module user-command)
when 'CB1'.
      loop at screen .
        if screen-name = 'LT_FORMAT_IO'
          and lt_format_cb is initial.
          screen-input = '0'.
          screen-invisible = '1'.
          modify screen.
        endif.
      endloop..
Once screen is displayed again , the IO field stll remains non grayed out.
Please advice
Chris

PPD field grayed out.....How do I get the PPD field populated? Windows 7 x64

I have an employee running Illustrator in the Creative Cloud and for whatever reason her PPD field is grayed out when she goes to print. My other two employees running this both have the Fiery file for the printer we have as an option. Any idea how I can get the PPD field populated?

Permissions issues on the PPD files or the printer... Or the driver has never been fully installed in the first place due to whatever technical or again permissions issues...
Mylenium

Service PR Currency Field Grayed out

Hi Experts,
We find that for PM Orders created for Control Key for Service Requisitions, the Price and Currency Field is always grayed out while this is not the case for Material PRs.
Is there any PM specific setting to make that Field as Editable
Field Name is AFVGD-WAERS
Prompt reply for this will be Highly appreciated
Regards
Manish

Hi Gurus,
Any user exit for the same, i.e. to change/edit the currency field in service PR.
I think the logic here is correct.
In Material PR we can edit the field but in Service PR we are not allowed to do so.
Let me take an example, In a company dealing with some products, needs a big welding work to be done. One service PR will be raised and if so how the payment would be made because that vendor will ask for local currency only.
@Tyag need your help I think the issue is clear.
Kindly input some suggestions.
Thanks & Regards.
GS

Log & Capture Title Field Grayed Out/Can't Write

While logging clips from a mini-dv tape (in Log & Capture), I clicked in the title field and that field suddenly grayed out and I cannot write in the title field. My temporary solution is to check "prompt" so that I can write titles for clips after I log them. Log and Capture work fine as does everything else in FC 7. I tried trashing prefs but no luck. Any suggestions or solutions out there?
Thanks!
JDH

Well, I can accept that that's normal, although I'd say it's nonoptimal UI design, since it made me think I was onto my problem.
Which still exists as described in initial post. Any ideas, anyone?
Thanks.

Shipment Cost Relevance field grayed out. Possibility to make this editable

Similar Messages

Maybe you are looking for