Shipment costs not yet calculated error in vt01n

When i try to create individual shipment in vt01n to check estimate cost there are shown error like this : shipment costs not yet calculated.
Note : I have set TK11
Please Help Me.
Edited by: Dani Herdian on Jun 24, 2010 9:54 AM
Edited by: Dani Herdian on Jun 24, 2010 10:11 AM

Yes, this quesiton is answered

Similar Messages

Account assignment not possible - item not yet calculated

Dear SAP Gurus,
While creating the Shipment Cost Document I am receiving following error.
Account assignment not possible - item not yet calculated
Message no. VY081
When I double click on the Item to enter the conditions the screen goes blank at the item level. Kindly let me know if there is anything missing.
Thanks and Rgards,
Shehryar

Hi,
Please check below config.
LETransportationShipment CostsShipment Cost DocumentShipment Cost Types and Item Categories.
Hope it helps you
Rgds,
Kris.

Explain the term 'If a quantity of goods received is not yet calculated'

Hi SAP Experts
I read the note: 212286-Overview note: Valuation during goods movements.
In the end, it reads
"Determination of credit posting to order during the goods receipt for production order During goods receipt for the production order, the value of goods movement is determined by the credit of the production order.
If a quantity of goods received is not yet calculated, credit posting
to order is calculated from plan credit.
If the quantity of goods received is already calculated, the order is credited for actual costs."
Please help to explain the sentence, thanks you.
If a quantity of goods received is not yet calculated, credit posting
to order is calculated from plan credit."
Regards
Mike

Thank Mukthar.
I know the logic for the production, but i don not think the sentence' if the quantity of goods received has not yet been calculated' is apply to the logic of production.
For example, 135103-GR for purchase order in foreign currency: Rounding, In the beginning, it also reads "The problem can occur if the quantity of goods received has not yet been calculated.".
It not only describe the production order, but also describe the purchase order. so i think it apple to one special situation.
Regards
Mike

Shipment cost not added to material

hello Gurus
In inbound Transportation, shipment cost is not getting loaded to material cost while doing PGR... Pls Help
Rgds

Dear Guru's
With refernece to this note:
To add shipment costs to delivery costs in the incoming shipments, you need the following settings in Customizing:
Shipment cost item categories
Under the Shipment cost types and item categories activity, set the Relevant for costing field to A = Relevant for calculating delivery costs (Delivery costs). This results in the shipment costs not being transferred directly into accounting. The accounting is done via the purchasing functionality for delivery costs.
Conditions in the purchase order
Under the Define condition types activity, set the Condition type field to B = Delivery costs. In addition, select the Transfer shipment costs field. The system only shows this field, if you have chosen delivery costs as condition type. In the purchase order, you have to enter the condition type in the item category section. However, you do not enter a value since this value will be determined by the shipment cost document and will then be automatically transferred to the goods receipt document.
Goods receipt
To find the relevant shipment cost documents, you must know the corresponding inbound deliveries. Therefore for incoming goods this must relate to confirmation-related goods receipts. Under the Set up confirmation control activity, select the GR-relevant and GR assignment fields for the appropriate confirmation control key (which is then entered in the purchase order).
Can any one let me know how can i enter condition type in item category section? and also tell me can load shipment cost to material in case of outbound delivery.
Regards,
Rashid Masood

'Query has not yet calculated' When executing BW report in Bex

Hi, all
There is message 'Query has not yet calculated' when execucting BW report in BEx.
what's the reason? How to solve this issue?
however, when I change the filter to one or several employee number such as employee information report, there will be one or several records in the report.
Anyone can help me?Thanks very mcuh.
Carina

ok.
While using exception aggregation, you need to give a reference characteristics. You might have given 0calday for the same for 0ANSALARY ( SUM LAS ) and your infoprovider does not have 0calday and the report is unable to calculate the result based on 0calday.
This will obviously throw and error but you will be able to see the result. But the result will not calculate last sum for 0ansalary correctly.
For this, please check the infoprovider design. You can use reference character other than 0calday and make sure that, the reference time characteristics is present in your infoprovider.
Cheers
Chanda

Shipment cost not calculating on VT01N

Hi Gurus,
I have configured the shipment cost configuration in all the relevant areas of Transportation node but still Shipment Cost is not calculating in VT01N.
Following configuration has been done:
Define Routes
Define Modes of Transport
Define Shipment Types
Define Transportation Connection Points
Route Determination
Define Routes and Stages
Define Transportation Zones
Shipments
Maintain Transportation Relevance
Define Shipment Types
Shipment Costs
Basic Functions
Define Data Rules
Define and Assign Tariff Zones
Shipment Cost Document
Shipment Cost Types and Item Categories
Shipment Cost Relevance and Default for Shipment Cost Type
Pricing
Define Condition Types
Define and Assign Pricing Procedure --- here I am using the Standard Pricing Procedure
SettlementAssign Purchasing Data
I have maintained the condition record in TK11.
Please let me know If I have missed any other steps.
Also please let me know the sequence in which the pricing will be picked up.
Quick action Text Removed
Regards
Message was edited by: G Lakshmipathi
Please dont add such text in your post

Hi Moazzam
Actually I am not a new member, just created a new ID. Unfortunately I have lost my old id .
I did search Google and SCN from the last two days before posting this discussion in SCN. Some of the good links which helped me for the configuration are:
Standard Shipment Process
Shipment Cost Processing - Delta - TD - Transportation and Distribution - SAP Library
Transportation Configuration and Process Flow - ERP Operations - SCN Wiki
Shipment cost
Shipment cost basic configuration...
Transportation (LE-TRA) - SAP Library
Shipment cost - VI01
Net value is zero when creating shipment cost
ETC...
Currently get the SDTRA.PDF document which I am reading .....
Infact after reading all the document I still unable to understand the proper technical flow required for shipment cost calculation.
Please share me your concept, it will be helpful for me.
Regards

Shipping cost not getting calculated in CRM IC webclient for a certain regi

HI all,
I have an issue where when we create an order, the shipping cost is not getting calculated automatically.. and so we are having to manually enter the shipping cost..this is happening only for Apac regions. for all other regions it seems to be working. but the shipping cost is getting calculated in R/3. can anyone provide input for this?
Also, what factors determine the shipping cost?
Thanks,
Preethy

This is a funtional issue... You'll be better of opening this message in the right Area.... or open an OSS message for SAP.
Regards
Juan

Shipping cost not getting calculated in CRM IC webclient for a region

HI all,
I have an issue where when we create an order, the shipping cost is not getting calculated automatically.. and so we are having to manually enter the shipping cost..this is happening only for Apac regions. for all other regions it seems to be working. but the shipping cost is getting calculated in R/3. can anyone provide input for this?
Also, what factors determine the shipping cost?
Thank you,
Preethy

what price conditions determine your cost in R/3?
might be easier to use the CRM gui and create the order in crmd_order and look at the conditions. Unless you set it up there is no plant in CRM (just vendor) so if your cost is tied to your plant, I'm not sure how you would get this without a possible rfc call to R/3.

Certificate not yet generated errors and wifi drop outs

Hello all! Recently I've been getting the following errors in console
11/5/13 8:02:52.815 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.815 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.816 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.816 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.817 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.817 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.817 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.818 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.818 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.819 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.819 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.820 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.821 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.821 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.824 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.827 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.828 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.949 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:52.986 PM apsd[87]: Certificate not yet generated
11/5/13 8:02:53.369 PM apsd[87]: Couldn't find cert in response dict
11/5/13 8:02:53.370 PM apsd[87]: Failed to get client cert on attempt 1, will retry in 15 seconds
The last line keeps repeting after it tries again attempt 101, will retry in 900 sec etc...
Additionally I've noticed that periodically my wifi will drop out, and when I go to Airport Utility my Extreme is unavailable. I don't know if this error and the two the wifi drop outs are linked or not. At first I thought it was the new firmware for the basestation, but now I'm not so sure because last time I launched airport utility and the extreme was unavailable I saw the basestation come back on line.
One final note. I have a home server on a mac mini (ML Server essentially for ituens shared liberary). All the macs access this server.
Thanks in advance

From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

Assertion not yet valid error in SHAREid

We have SHAREid 2.5 and setup as destination. From time to time the user are getting a error like this. Any idea?
Web Intersite Signon Error
RECEIVER: ERROR: An invalid SAML Response was received: Assertion not yet valid; NotBefore = 2009-05-19T19:31:46Z; now = 2009-05-19T19:31:40Z
I see there are fields for "Assertion Validity Period" in the Source Assertions sections. Can the client (source) modify the values on their side to resolve this issue?
Thanks.
Edited by: user504421 on May 21, 2009 12:00 PM

The issue was with the clock on the IP side. The 2 federation servers were not synched.
Thanks.

Production order Target cost Zero - Varience calculation error KV151

Hi Experts,
I am having an issue on KKS2 variance calculation, system throwing error KV151 Target cost is 'Zero'
All pre-requisites are ok including BOM, Rates, Routings etc..
Process:
Production order with FERT - valuated material,
All BOM components in production order are Non valuated stock items, Non-stock items
Note: Cost Estimat e is for Labor and Overhead only.
After production order confirmation CO11N, production order Cost analysis displays - Target value ("Zero") and actual value.
Due to above reason in KSS2 we are unable to calculate variance, system displayed error KV151.
I cannot settle the production order, guide if I am missing some thing in config. ?
I appreciate you quick response.
Thanks,
RK

Thanks for your reply Swapvik & Takashi, I have no issues on configuration side very thing looks good.
Cost estimate - Good
Variance key - Good
Production order - FERT (Valuated) - good
BOM components - UNBW, NLGS only - Good
Labor rates - good
Periods - good
Production order confirmation - Good
Actual cost - Good
My Issue is Target cost is zero on cost analysis in CO03 but if I can see target cost in KKBC_ORD report.
I am unable to calculate variance and settlement.
I appreciate your response.
Thanks,
Raj

Succesfull WSAstartup not yet performed (error 10093)

When lab-view is started up, the following error-message appears: “Error 10093 occurred at PSC_ETH Close Lowest Level.vi.”
couls somebody help?
BR
Søren Bækhøj Kjær

Hi sbkjaer,
Was this ever resolved? You may want to post a similar message on the LabVIEW forum.
Best regards,
Chad Erickson
Switch Product Support Engineer
NI - USA

Fiscal year change not yet made error message

We have done all of the year-end tasks including AJRW and have been using asset reports since January. All of a sudden, today, we cannot get any asset reports for one of our 70+ company codes. Table ANLC looks like it has the appropriate entries for 2009 and 2010. OAAQ shows 2008 last closed. What could have changed to start getting Message no. AB059?

Hi,
Do like below.
First do AJRW for FY 2009 for all of your company codes.
And once the above finished, run AJRW again for FY 2010 to all company codes.
Run both in background mode.
This will resolve your issue.
Thanks,
Srinu

Shipment Cost Calculation

Dear All,
I know that tariffzone plays a role in determining the price for the freight/Service Agent condition in case of outbound shipment cost calculation
I have the following query in Shipment Pricing.
Can anyone please explain whats the role of the 2 postal code columns in the tariff zone assignment?
Also how & where I have to maintain the data for determining the tariff zone which I have assigned to the above combination.
Please help.
Regards,

HI Dave,
Thanks for the response.
Please note that I have maintained postal codes in my Shipping point also in my customer master.
For the combination of TP Point, Service agent, Shipping type & Country I have made the following assignment.
I have given my shipping point Postal code in both the Postal code columns of Tarff zone assignment (say Tariff) & my customer master Postal code in both the Postal code columns of Tariff zone assignment (say Tariff1).
Now I have maintained the condition records in TK11 for the combination of Depart. Tariff zone/Destn.Tariff zone/Service Agent i.e. Tariff/Tariff1/Service Agent
But my condition record value is not getting determined & when I simulate my shipment cost I am getting the following error message.
Shipment costs not yet calculated
Shipment costs item 000001 w/ ref. to doc. $0001 item 0001
Message no. VY104
Goods types directory could not be determined
Message no. VW803
Please help to reolve this issue.
Regards,

Error in Shipment cost Transfer in VI02

Hi,
When i am selecting the transfer tick in my VI02 in procurement is shows the PO is assigned but when i am saving it its giving be the leg.
When i am checking the leg it gives the following message
Forward shipment cost is incorrect
General error in acceptance posting
Can anybody help to solve the issue.
Manish

Hi Sachin,
I am also facing similar kind of issue as Manish is facing.
Issue is : while clicking on Transfer button & saving. System throws a message "
While saving the shipment cost using vi02 , message"Forward shipment cost Incorrect-No service items selected" is coming.
In my Case status is as follows:
Shipment Cost Fully Calculated - C
Account assignment fully completed - C
Forwarding status Fully Transferred - A
Please suggest.
Kamal Batra

Shipment costs not yet calculated error in vt01n

Similar Messages

Maybe you are looking for