Shipment details in IS OIL data extraction

Dear Experts,
We have got the requirement to create reports on shipment details. Based on the requirement we have identified the
Infosouce/ Data source : 0OI_TD_OIGSII
Info Cube: 0OI_TDC01. we think this cube will satisfy the requiremnt.
But the problem is the data source is not delta enabled. so how do we extract the data and how to capture the delta.
These data sources are IS OIL specific, so dont know the data extraction procedure.
Please advise.
Regards
venu

Hi,
I don't know the module oil.
1. what is the selection in your infopackage - a date?
2. can you decide: in which time selection you have changes in the data: for example the last 12 month?
3. create a DSO and load the data.
4. load the delta in a infocube.
Sven

Similar Messages

Open data extraction orders - Applying Support Packs

Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NK

The exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.

Master data extraction from SAP ECC

Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below,

Standard SAP reports for detailed Service Entry Sheet data

Hi All,
I am searching for standard SAP reports to extract the detailed Service Entry Sheet data out of SAP. For example, I need the deailed information like Service Entry Sheet Number, Purchase Order Number, PO line item number, short text, Posting Date, External Number, Service number, Quantity, Gross Price, Cost Object (Order or Network or WBS), Personal Number (if applicable), workday. I couldn't find any standard report. So if anyone know it, please help me.
Thanks,
Ting

Hi,
In ME2S also you can get good report by execution and by clicking SO/ PO number.( where cost object can be viewed)
If you are very much specific, go for development
Regards,
Biju K

Data extraction / Conversion / Mapping / Miration

Hi All,
Can any one please explain the meaning of the below terms and how data is moved from Non SAP system to SAP system?.
"Data extraction / Conversion / Mapping / Miration"
Kindly give me detailed step by step instructions on how to accomplish this. Also if there is any documentation please forward.
I appreciate the help in advance.
Raj

Hi Raj,
We can use LSMW, BDC, eCATT to upload the data from Legacy to SAP system.
Data Extraction - Data has to extract from legacy in to some flat file like Xls.
Conversion - Convert as per the need of SAP.
Mapping - Mapping the extracted field with SAP field for upload.
Migration - Data migration from legacy to SAP using any tool like LSMW, BDC, CATT.
Good Luck
Om

[sap-bw] SAP HR data extraction errors....into BI 7.0 ...from ECC 6.0..

Hi Gurus,
We are doing HR data extraction with the following details:
Cube: 0PT_C01 - Time and Labor
data source: 0HR_PT_1 - Times from personal work schedule
Records in ECC: 15mill +.
"Init load with Data "is being loaded in packets of 40K records (400 packets approx).
Each time we load (we tried reloading after deleting data and reinit) it is loading same records. But it is giving the following error. Surprisingly this error is coming for different packets in different loads. for ex: 1st time packet 6...2nd time packet 58....3rd time 122 etc.....it keeps changing...
Processing end : Errors occurred
Error when generating the update program
Diagnosis
An error occurred during program generation for InfoSource 0HR_PT_1 and
InfoProvider 0PT_C01 . This may be extrapolated to incorrect update
rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
We reactivated and verfieid update rules. But no use.
Appreciate any kind of help.
thanks in advance.
J.

Oscar,
Thanks for the help.
We tried the following one by one.
1. Delete and recreate update rules. To be frank....there is no CODING or complication in there...
     It did not work.
2. Tried loading only to PSA. It loaded 15mill records perfectly. But when we tried updating target cube,
    same story with many more errors.....earlier we had 10 packages failed out of 387.......
     this time almost every alternate package is marked red and same error....update generating update
     program.....
Hope somebody will come up with a solution.

Parallel Data Extraction from R3 to BI

Dear Experts,
I am trying to execute Parallel data extraction from R3 Development to BI development.It was previously done smoothly .Without any changes its stop in parallel .Your suggestions are welcome.
Regards
SurendraJain

Hi Surendra,
thanks for your reply, I am not a basis expert but a BI person. You did not detail the solution when you resolved yourself, so i was wondering if you can share some bits over here.
I would have appreciated if you would have give some details - there are quite a few parameters in RZ11. What is the technical name of the parameter you are talking about ?
You mentioned about checking the parameter - I mean what needs to be checked, any specific values need to be there.
Regards
Deepak

Terms of Payment - T052 data extraction

Hello Gurus,
Can you help me in a matter? I`m looking for a standard data extraction mode of Terms of Payment (T052) table. Is tere a standard datasource, or I`m just able to get those data from R3 side to Bw using generic extractor?
thx
laszlo

Hi,
I don't think that there is any standard datasource which provides the information on Terms of Payment.
We do have a datasource 0CUST_COMPC_ATTR which gives the mapping for a customer and terms of payment but i dont think this serves your purpose
You would have to create generic datasource which fetches this detail.
Edited by: Rahul K Rai on Aug 25, 2010 3:37 PM

Field symbols and data extract

hi frenz,
Can anybody please give me details about field symbols and data extracts what is the purpose of using them and regarding the performance issues for the two.....
if some one explains with an example its going to be fine......
Please don tell me to refer the 980 or help document.....
Please help me out

Field symbols offer functionlity similar to pointers in other programming languages. It does not occupy memory for the data object, it points to the object that has been assigned to the field symbol. You use the assign command to relate to the data object. After the assign operation you can work with field symbol in the same way as with the object itself.
You define the field symbol as: field-symbols <fs>.
field-symbol <fs>.
data field value 'X'.
asssign field to <fs>.
The field symbol <fs> now inherits all the properties from the assigned field, and you can work with the field symbol in the same way as with the field itself.

SPM data extraction question: invoice data

The documentation on data extraction (Master Data for Spend Performance Management) specifies that Invoice transactions are extracted from the table BSEG (General Ledger) . On the project I'm currently working the SAP ERP team is quite worried to run queries on BSEG as it is massive.
However extract files are called BSIK and BSAK of; which seems to suggest that the invoices are in reality extracted from those accounts payable tables.
Can someone clarify the tables really used, and if it's the BSIK/BSAK tables what fields are mapped?

Hi Jan,
Few additional mitigation thoughts which may help on the way as same concerns came up during our project .
1) Sandbox Stress testing
If available u2013 take advantage of an ECC Sandbox environment for extractor prototyping and performance impact analysis. BSEG can be huge (contains all financial movements), so e.g. BI folks typically do not fancy a re-init load for reasons outlined above. Ask basis to copy a full year of all relevant transactional data (normally FI & PO data) onto the sandbox and then run the SPM extractors for a full year extraction to get an idea about extraction system impact.
Even though system sizing and parameters may differ compared to your P-box you still should get a reasonable idea and direction about system impact.
2) In a second step you may then consider to break down the data extraction (Init/Full mode for your project) into 12 monthly extracts for the full year (this gives you 12 files from which you Init your SPM system with) with significant less system impact and more control (e.g. can be scheduled over night).
3) Business Scenario
You may consider to use the Vendor related movements in BSAK/BSIK instead the massive BSEG cluster table as starting tables (and fetch/lookup BSEG details only on a need base) for the extraction process (Index advantages were outlined above already).
Considering this we managed to extract Invoice data with reasonable source system impact.
Rgrds,
Markus

Data extraction from Non-Unicode ECC6 to Unicode SAP BI system

Hi,
We have an existing non-unicode ECC6 system. Currently we are installing SAP BI unicode system. Can anyone tell me are there any issues in data extraction for SAP BI from a non-unicode ECC6 system to an Unicode SAP BI system ?
Please also note that our data consists of Asian (korean, Japanese & Chinese) fonts.
Regards,
Anirban

Hi Des Gallagher,
Thank you for your reply.
I have gone through the notes suggested by you, but they suggest issues related to BW 3.x versions. We are currently on SAP_BW 700 - SP16. Also, among other notes i found note 510882 which might be helpful for custom developments.
But i am still wondering whether we are going to face major issues related to data extraction from non-unicode ECC6 system to unicode SAP_BW 700 system.
Incase you have any further details, please let me know.
Thanks in advance.
Regards,
Anirban Kundu

Ho to automate data extraction from KSB1 and GR55 transaction code

Hi All,
Can you please let me know if their is a way to automate data extraction from transaction code KSB1 and GR55. I have to extract data from 5 different servers .i.e different server for each region and again i have different controlling area codes in each region. Following are the details which i use to extract the data. It takes too long for me to extract data from all this regions and controlling area codes using my parameters. It's very time consuming so i want to automate this process. I am end user so i don't have any admin rights. Please let me know any workable solution asap.
Production areas : PNA for Americas, PSI for Asia Pacific and Japan, PGY for Germany, PIT for Italy and PEU for Europe
Controlling area codes in PNA : CAR for Argentina, CBR for Brazil, CMX for Mexico and CUS for USA. Same way there so may other controlling area codes for all other production areas
Period From 1 to 12
Fiscal Year : 2009
Cost Centre Group : G_6284
Cost Element Group : 1742000000
Please let me know in case you need more details.

Hi,
Here follows a translation from German:
SAP GUI (client) for Windows enable
Start SAP Logon and log on to the SAP server.
Click the button on the toolbar to adjust for Local Layout.
Click Options and then click the tab for the scripting.
Select the Enable checkbox for scripting.
Disable the checkbox for Notify when a script is assigned to an active GUI and the checkbox for Notify when a script opens a connection.
Save the settings and restart the SAP GUI again.
SAP-server enable
With the following procedure, you can enable scripting by the SAP client temporarily. The specified value in this way is lost when you restart the server.
Start SAP Logon and log on to the SAP server.
Start a transaction RZ11.
Enter sapgui / user_scripting in the window to manage the profile parameters.
Click on ads.
Click in the window to display the profile parameter attributes to change value.
Enter TRUE in the field for a new value.
Save the settings and log out from the SAP GUI.
Quit the SAP Logon.
Note:
If the server administrator edited the application server profile of the SAP system to sapgui / user_scripting = TRUE to include the scripting is enabled when you restart the server by default.
SAP provides an option to change the network connection mode at any server. The following two connection modes are available: high-speed connection (LAN) and connecting with a slow speed. Although Functional Tester works in both modes, the high-speed connection with a recorded script is played only in this mode. This also applies to other modes. They must reflect your SAP script in the same network connection mode, with which the script was recorded. It is recommended that the mode of "high-speed connection, as it offers a greater number of valid recognition properties.
Regards,
ScriptMan
Edited by: ScriptMan on Apr 13, 2010 12:32 PM

How the data extraction happens from HR datasources from R/3 to BW system.

Hello All
How the data extraction happens from HR datasources from R/3 to BW system.Incase of delta records ( for CATS datasources ) ,Is there any flow like LO .
Incase of Full and delta loads how does the data will be taken from R/3 to BW,DO we need to fill setup tables ?
Searched forum but couldnt able to find the relevant one.
Thankyou
Shankar

Hi Shankar.
HR Datasources do not have setup tables . Though before implementation, certain customizations should be done and the delta loads have dependency on other data sources. Also you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Follow this link for details on customization and dependencies for all CATS datasources.
http://help.sap.com/saphelp_nw70/helpdata/en/86/1f5f3c0fdea575e10000000a114084/frameset.htm
Regards,
Swati

Can any one pls tell me the procedure of crm datasourse data extraction r/3

hi
pls can any one pls tell me the procedure of crm datasourse data extraction from r/3
regards
subbu

Subbu,
First off please don't post the same question twice. I have locked your other question due to it being a duplicate.
Second off: don't expect an answer to your question immediately.
Third off: You need to read the rules of engagement before posting any more questions here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Fourth: You question is way too vague and honestly if you would have done a search or read some introductory material on CRM, you would have learnt that the CRM middleware handles the data transfer.
Last: I'm locking this thread because your question is way too vague, please take a look at the CRM wiki and help.sap.com and read all the associated documentation about CRM on those sites.
CRM wiki
https://www.sdn.sap.com/irj/scn/wiki?path=/display/crm/home
Then you can come back here if you have a detailed question after reading those materials.
Take care,
Stephen
CRM Forum Moderator

HFM Data Extract in Task Flow ??

HI,
I have a couple of clarification on HFM Data extract in HFM Task flow,
1) Is Data extraction possible for the predefined accounts in HFM task flow? – in which Accounts & other dimesion memebers needs to be pre-defined so that just on execution of the task flow, HFM needs to extract the data into a text file (i.e., It should not prompt to select the Accounts (as well as other dimension members) each time we extract)
2) For Data extract purpose, we need some of the HFM members in a different name. So, we planned to create a alias table. In data extraction, Is it possible to select the member names from an custom alias table?
3) We have to define a specific set of Account values as negative in the extracted data file which is actually positive in HFM. Also, In the extracted data file, We need to have the Account member name same as the existing HFM Account name.
a. For instance,
In HFM:
Account Member Name in HFM: VUK
Account Value: 1000
In the Extracted data file:
Account Member Name in data file: VUK
Account Value: -1000
Is this feasible? If yes, can you explain a bit in detail (like how we can implement this in HFM)
Thanks,
Siva

HI,
I need a help in HFM Data extraction.
We use four custom dimensions and our requirement is to get the data extract for the custom members which we need(we need only parent members in custom dimensions).
But, by default, HFM extracts the data for all base custom members(and not for any parent custom members) - which we dont wish to have.
Is there any possiblty to extract the data by choosing the custom members for which we need data ??
Our's is a classic HFM Application in 9.3.1. (in Oracle DB)
Your response will be highly appreciated !!!
Thanks,
Siva

Shipment details in IS OIL data extraction

Similar Messages

Maybe you are looking for