Shipment field label change

Requirement is to display appropriate label based on the inbound and outbound process in VT01N,VT02N and VT03N transaction.
Inbound and outbound process will be determined based on shipment type.
For example - Outbound process - CHECK-IN should appear in Deadline tab
Inbound process - SHIPMENT START should appear in Deadline tab
Please let me know how we can achive this. Do not recomend field exit as this is not supported by sap.
Regards
Pravin

Hello Marwan,
Just open the DataElement in SE11 and check whether the changed descriptions are there or not?.
or If any request is created while you are created in Development . just transport that TR to testing client and check..
Regards,
Sankarbabu

Similar Messages

Standard field label change and drop down

Hello,
I need to change a text field label and create a drop down for a input down field. The problem is that they are standard fields in sap. I am not sure if by code i can do this change. Because I tried doing the change through cmod to change the field text and append for the drop down in the domain, but for some reason it did not work. Any help would greatly appreciated.

>
David Rivera wrote:
> Hello,
>
> I need to change a text field label and create a drop down for a input down field. The problem is that they are standard fields in sap. I am not sure if by code i can do this change. Because I tried doing the change through cmod to change the field text and append for the drop down in the domain, but for some reason it did not work. Any help would greatly appreciated.
What is the program?
You can change the field text in CMOD but you cannot do a dropdown in CMOD.
Dropdown is for the screen element and you need to change the screen for this and need to populate the field. Find if there is any user exit for your requirement.

Subject: Field label changed but it is not showing after getting transporte

KVGR3 Field Label is changed in Development box but if is not getting reflected in Test Server. CMOD transaction is used for changing the Field Label
In test server the new values are present in DD04T table but it is status N (edited but not activated)
In dev server the new values is present with A status.
Transport is also successful. In MODWRD table the new values and old values both are correctly present.
Please advice. I have not searched for SAP notes.

Hi
i think u need to activate
1. in cmod
2. field label
and then transport.
Regards
Sajid

Field Label Change

Hi,
I want to change the Field Labels
How to do this, If any body knows plz tell the steps
I Look forward to your reply
Thanks
SEK

Hi Raja,
 WA_FIELDCAT-FIELDNAME = 'EBELP'.
 WA_FIELDCAT-COL_POS = '2'.
 WA_FIELDCAT-JUST = 'C'.
 WA_FIELDCAT-SELTEXT_L = 'Item Number'. ( Here you can change the field lables )
 WA_FIELDCAT-LOWERCASE = 'X'.
 WA_FIELDCAT-EDIT = 'X'.
 APPEND WA_FIELDCAT TO IT_FIELDCAT.
Thanks
Vikranth Khimavath

Sreen field label change

hi,
In enterprise portal in partner registration form i want to change scrren name.
in arress there is 'zipcode'. i want to make it as postal code ?please tell me how can i make it.
swathi

See screen field change

Field lables changes in ESS iView not reflected on portal

Hi All,
I am trying to customize the SAP ESS Address DC (webdynpro Java) for South Africa region as per the SAP OSS note (No: 1428933).
In order to incorporate the changes I have imported the ess/za/addr DC into NWDS. I have changed the label text as per the OSS note and deployed the DC but changes are not reflecting in the portal
I did some more test on Label text;
1. Removed the Label text property value from DC and deployed the application, when I run the application during runtime screen is not showing any label text message for the label since I made it to empty.
1. I added my custom text message to label text value instead of standard label text value and deployed the application, when I run the application during run time screen is automaticaly showing the standard label text value not my custom label text value.
I'm trying to figure out from where these field labels value are coming from? Theoretically it should reflect field lables whats given in webdynpro but thats not the case here.
From where Label field value is coming?. Help me out in this. Thanks,
Regards, Suresh KB

If you are just changing the field label the recommended approach is to do it through Web Dynpro UI personalisation. DO NOT user NWDI to change the source code just for field label change. The way you change through UI personalisation is locate the iView in portal content, and select preview of iView then use CTRL+RIGHT click mouse button on the field that you want to change the text, you will see properties of selected field in a popup window where you can change the default text. Once you change it, and apply the changes you will be able to verify you changes in the iView properties (additional properties will be automatically created for the change you made). Now check the personal data service under ESS role you should see the change.
Hope this helps
Siva

Views in MM03, how can I add fields and changes fields labels

Hi !!
I need to change some labels that appear on Sales: Sales Org 2 (view on MM03, MM02..MM01)...
Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
example: when I enter on MM03..I select differents views(including Sales: Sales Org 2), later I specify sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org 2).
When I access in tab: Sales: Sales Org 2, I can see one Group that it's called
Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example: Material Group 1 (MVKE.MVGR1 )... I would like to know :
1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
I will appreciate your help!!!
I will give you points for your answer
Alice

Hi Alice,
And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
If I need to add some values???
After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well. Give it try.
And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
I do not understand your questions. Can you elaborate more?
Regards,
Ferry Lianto

Changing Field Labels of module pool screen dynamically

Hi All,
Can anybody tell me how to change field label of text field in dialog screen dynamically.
The Screen/Transaction is standard one.
I have created a Enhancement point for this change in one of PBO module's subroutine for this screen.
This Field label is defined as a 'Text' field only. We can't change it any more as it is standard one.
Can anybody tell me the solution for the same.
I have to change this label value as per some validations and its corresponding text field value will remain as is.
Thanks,
Deep.

Hello,
I think it is not possible, but try changing the name by Looping on screen table on PBO,
Bye
Gabriel

Changing Address Field labels in PM module.

Hi all,
We have an urgent requirement where we need to change the field labels of address subscreen.
These changes should reflect only in IE01, IE02 and IE03 transactions restricted to only one particular equipment type.
Example: Field label ( Name2 ) changed to Field label ( Manufactured By )
Points will be rewarded to all useful suggestions.
Thanks,
Bhanu.

Hi all,
We have an urgent requirement where we need to change the field labels of address subscreen.
These changes should reflect only in IE01, IE02 and IE03 transactions restricted to only one particular equipment type.
Example: Field label ( Name2 ) changed to Field label ( Manufactured By )
Points will be rewarded to all useful suggestions.
Thanks,
Bhanu.

Changing field labels

I need to change the description of three fields, VKBUR, VKGRP and BZIRK so that the terminolgy aligns iteself with our business processes.
I have used SE80 to modify the Data Elements descriptions, short, mid and long. I have registered the change through SAP.
The changes have been activated. Though the log reported that a number of tables could not be modified because the enhancement category for some obscure tables was missing. Most of the tables were adjusted.
Viewing transaction VA22 - Quotations the sales header screen has the correct new description for only one of the three fields! Why this should be one of three is a mystery.
I think that the structure DD04D is filled with the short, mid and long descriptions.
Any ideas?

Hi Nigel,
You can change field labels, in tx CMOD->Go to->Text Enhancements-> Keyword->Change.
Here you can enter the Data Element of the field you want to change the text, and the language. Also, you should look at the screen where the text field is. Because if the text has the attribute "Modify" to "F" (Fixed), you cannot modify this text.
Thanks
Warm Regards,
Mohammed Hussain.

Want to know that wat is the impact of changing a field label in master

Dear Experts,
Want to know that what is the impact of changing a field label in masters ?

hai sap gurus,
kindly clear my doubt..
Swetha

How do you change fields labels in adf query please ?

Hello , I would like to change the field labels in an adf query as they have been generated by default by oracle .
The only code found is as follows :
<af:query id="qryId1" rows="6" headerText="Search" disclosed="true" maxColumns="2"
 value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
 model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
 queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
 queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
 <af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
 required="#{bindings.PrtDesc.hints.mandatory}"
 columns="#{bindings.PrtDesc.hints.displayWidth}"
 maximumLength="#{bindings.PrtDesc.hints.precision}"
 shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
 <f:validator binding="#{bindings.PrtDesc.validator}"/>
 </af:inputText>
 </af:query>

Hi,
if you use ADF BC, set the UI Hints on the View Object attributes for the attributes and these will make the labels
Frank

Change field label for field IZWEK in transaction AS03

Hi experts,
I would like change field label for field IZWEK because I want use it for another purposes. Itu2019s name is Investment Reason at transaction as03.I can change name this label in reports by using se63(translation->abap object->short text->repository text->data element) and giving object name as IZWEK. I get changes in reports only, in help(F1). But I havenu2019t idea what cause change label in as03 transaction.
Help me please.
Regds Stenwa

in tr. AOLK and AOLA you can change this.

Changing Field Labels texts: What happens after Upgrade?

Hi All,
my client would like to change some field label text of domains.
The question I have is, what will happen after change of release? Will the texts be overwritten? And all have to be maintained again?
Will I know which ones have been overwritten (SPAU)?
Any comment, suggestion, experience?
Thanks in advance!
thomas

Hello,
Guess your question refers to field label texts of datatyps - because domains have only the technical data definition. Anyway - all modifications of Data Dictionary elements ( domains, datatyps, tables) are handled by transaction SPDD during upgrades. The difference to transaction SPAU is, that transaction SPDD is used during the upgrade - after the 'Test'-phase and before the 'Import'-phase.
Have a look on the documentation of SPDD- it's quite good.
Regards Wolfgang

Changing field labels for JP29

Hello friends,
In transaction JP29 there are several field labels I want to change. I think I have to go to the MARA table and make the changes here, but I'm not sure where to do this.(trans se11 -> utilities-> database Utility?) In the test-system the labels are correct, but in production they are different, so I guess I have to make the changes in the production system?... I would appreciate any comments...
Regards Baljinder

Hi
Transaction: CMOD
Menu Path: Goto -> Text Enhancements -> Keywords ->
Change. Here we can give the data element and change the
label descriptions.
Kindly note that changes made here will be effective in
whole system, itz not specific to one data dictionary
object. Please understand the impact before making any
changes to SAP standard dictionary elements.
Also please check the link below:
Re: How to changes standard sap label description
Kind Regards
Eswar
Message was edited by: Eswar Rao Boddeti

Shipment field label change

Similar Messages

Maybe you are looking for