Shipment number and material move doc

What is shipment number? When and how is it generated? What is difference between shipment number and material movement doc number?

Hi
When you want to send several deliveries into one truck (mode of transport) and the truck is to deliver the goods to several ship-to-parties along a particular route, then this function is called "Shipment function".
The document prepared for it is called Shipment document.
Normally, in shipment we combine more than one deliveries meant for one specific route.
Shipment can be done before as well as PGI, but normally it is done before PGI.
Once PGI is done, Material document is generated.

Similar Messages

  • PO number and material issued against this PO for subcontracting

    How to know the link in between the PO number and material issued against this PO for subcontracting.
    I have checked that PO history is not getting updated.
    Thanks,

    Hi,
    We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
    Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
    So when we are post goods receipt, then we will come to know the consuption quantities.
    Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
    If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
    Thansk,
    Satya.

  • SWAP Equipment using IE4N, without serial number and material, it is possible?

    Hi PM Experts, I´ve been reading about the way to SWAP equipments from his functional location without using serial number and material, I think if it is not possible, but to be honest, I cannot find any logical answer for it, since equipment number is unique for a plant. Does anyone have found any work around for it?.
    I don’t want to use serial numbers and materials, because I think the process is really simple, since the client does not want to implement the refurbishment process. If there is a break down, here is what I do:
    Case 1:
    Dismantle damage equipment (Say PM01 Order Type)
    Install new equipment (same PM order)
    TECO the actual PM order
    ...Later
    Case 2:
    Create a new PM orden (say PM01 Order Type)
    Repair the break equipment
    TECO this new PM Order
    Here are the inconsistencies:
    What happen with the MTTR and MTBR reports?
    In case one, I´ll create the material as equipment, while I´m installing, starting date for his master data is the installation day, and the MTTR and MTBR will start to run. This is ok.
    What happened in case 2?, I need to stop the “clock” for the MTTR and MTBR of the dismantle equipment.
    This is the reason why, I would like to use IE4N, but since there are no serial number and material, I cannot.
    Can anyone please suggest a workaround for this scenario?.
    I´m thinking in use INAC (Object Deactivated) system status, can this status help me?, Does this status “stops” the clock for MTTR and MTBR report?. If I change the status to ACT, I´ll get the clock back running?.
    How about dismantle the equipment?, It will get the AVLB Available status, but the problem is, this equipment will be “floating” in the whole PM structure and I do not want it. I want to have it in a specific Functional Location but with this status, is this possible?. I woul like to use IE4N to SWAP UTs and later change the status to AVLB Available status, with and exits.
    I thinking in an Equipment Status and a “Z” MTTR and MTBR report, based on this status. But to be honest, I´d like a standard solution for it.

    For find my iPhone to work, the device has to be powered on and it has to be connected to a network (Cellular or WiFi).  Find My iPhone uses your AppleID as the account to search for.  Maybe the "guys" you were talking to were referring to a 3rd party application that essentially lo-jacks your device.  But even then, it would still require Power and a network. 
    I don't believe that there is currently a way to flag a specific serial number for location.
    Best of Luck.

  • Relations Between MLCD table and material movements type

    Dear all,
    I Have a question about relations between MLCD table and Material movements.  For Example We have a movement type Z71 when we did a movevent with tis movement type from MB1C Transaction. System creates a record in Mlcd Table. in this table Category field is VN and  PCat field is V. How system decides about VN and V
    is there any table which contains these conversions or is there any custimization in MM or CO modules ?
    Could you please help me if you have any information about subject.
    Best Regards

    Hi Anupam
    Thanks for your speedy reply.sorry i forget to mention i need FG materials details for given plant,production version,metrial type.In
    MKAL i am not able to give material type as input parameter
    Regards
    Bala

  • Relation between Material Number and Material document Number.

    hi xperts,
         I want to Know Is there any Relation ship between the <b>Material Number</b> and <b>Material Document Number</b>.
      If So can i get any Tcodes to check them?
    Thanks in advance.
    Message was edited by:
            STALIN JOSEPH

    Hi,
      Thanks for your reply.
    I want to Load the Inventory Management Data into Business warehouse ,there the Only way i correlate the Data between is by taking some material Number.
    and Material Document.
    In step 1 i load Material Number data and step 2 i load material document data,so i want to make cure those two loads i load the same material numbers.
    Please help me to collerate between them.

  • Get Material Document Number and Material Document Year

    Hi everyone,
    Right now, i'm developed idoc program. I need material document number (MBLNR) and material document year (MJAHR).  I have information only BAPI2017_GM_HEAD_01 and BAPI2017_GM_ITEM_CREATE. Is there any FM to get this value ? Thank you
    Regards,
    Satria

    Ok, i will explain with more detail about my problem
    Here my pseudocode :
    -  Get data with type BAPI2017_GM_HEAD_01 from Idoc (let we say this X)
    -  Get data with type BAPI2017_GM_CODE from Idoc (let we say this Y)
    -  Get data with type BAPI2017_GM_ITEM_CREATE from IDoc (let we say this Z)
    -  IF Y-GM_CODE <> "06" THEN
           CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
               EXPORTING
                   GOODSMVT_HEADER = X
                   GOODSMVT_CODE     = Y
               TABLES
                    GOODSMVT_ITEM      = Z
       ELSE IF Y-GM_CODE = "06" THEN
           CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
                EXPORTING
                     MATERIALDOCUMENT = ???
                     MATDOCUMENTYEAR = ???
                    GOODSMVT_PSTNG_DATE = ???
    I know that material doc and mat doc year is in table MKPF. But the problem is they are  the primary key, so how i use X,Y,Z in select operation to MKPF? or is there another way using FM ? Thank you
    Regards,
    Satria

  • Map BATCH number corresponding to ORDER number and Material number .

    hi all,
    i want to map the BATCH number corresponding to Material Number .
    i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
    so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
    but the batch number column is blank for all .
    and in case of table MCHA , these is assigned batch number to every Material number .
    also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
    so please suggest me the Possible way to resolve this .....
    sunny

    hi dsk,
    thanks for your earliar reply,
    actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
    how can i map batch number with corresponding to PO num ber, '
    in the report i used structure vbplp with field charg"(batch num).
    also i want to know from which table i can get customer part number and Po number .
    how can i add batch num ,..
    from which table or with which field i can compare itr to get .
    sunny

  • Display of FI document numbe and material document number

    Hi,
    I want to display both the material document number ( RBKP ) and the acccounting document number ( BSET ) together while posting the Invoice using MIRO transaction.
    Pl provide with your valuable suggestions.
    Regards,
    R. Dillibabu.

    Hi Arif,
    We wanted to generate a number during invoice verification based upon the order type of the PO, As you know it is not possible to generate a order specific material document number but it is possible to generate a order specific accounting document number provided we can select RE or ZE while processing invoice verification.
    This accounting document number will be considered as a claim number for one of the customized business process ( Warranty Claim process ).
    The user has to record the claim number on a daily basis. Currently it is being done by passig the RBKP-BELNR to the BKPF to get the accounting document number ( BELNR ) which is quite tedious.
    Hope the business functionality is quite clear now.
    Regards,
    R. Dillibabu.

  • Link between invoice number and material document number

    I need a way to get the list of material document numbers which correspond to a particular invoice.  Is there a way to find this information?  I am looking [looping] at table EKBE during a user exit in SAPMV60S but I need to restrict the entries by a range of (multiple) material document numbers.
    Regards,
    Davis

    It looks like you're missing a piece of code.
            SELECT SINGLE * FROM BKPF WHERE BUKRS = Z_EKKO-BUKRS AND
    *                                       BELNR = EKBE-BELNR AND
                                            AWKEY LIKE X_KEYFLD AND
            CHECK SY-SUBRC = 0.
    The SELECT just ends at the "AND".
    Should there be another line after the "AND"?
    You said you had an invoice number; why can't you use that in your WHERE clause to limit what is returned from BSEG?
    What field are you using for the invoice?
    I had mentioned BKPF-XBLNR before, which we use to store the vendor invoice on a PO, but what you are doing sounds different.  Are you referring to an invoice that you created?
    I think that this might be in BSEG-REBZG, and you should be able to filter on this field.
    Shouldn't such an additional filter give you what you want?
    e.g.
    if the invoice specification is a single value:
    * Getting the Vendor Invoice header data
      SELECT SINGLE * FROM bseg WHERE bukrs = z_ekko-bukrs AND
                                      belnr = bkpf-belnr AND
                                      hkont = '0000416000' AND
                                      rebzg = invoice
    or, if the invoice specification is a range or list:
    * Getting the Vendor Invoice header data
      SELECT SINGLE * FROM bseg WHERE bukrs = z_ekko-bukrs AND
                                      belnr = bkpf-belnr AND
                                      hkont = '0000416000' AND
                                      rebzg IN s_invoice
    If you are not using rebzg, then do the same against whatever field you are using.
    Good luck
    Brian

  • Validation for Stock initilization and material movements

    Hi All,
    I have done Stock initilization as well the material initilization from R/3 systems. Now i need to validate the results with R/3. Can anyone tell how can i compare with R/3 or any table with which we can validate the BW data in cube.
    Any idea will be rewarded.
    Thanks,
    Muruganand. K

    Hello,
    Cross the values between the query that you surely constructed in BI and the values given by tcode MB5L in R3.
    Regards,
    Jorge Diogo

  • Shipment document number and cost document number for vendor invoice

    Hi,
    Given a Vendor invoice number ( MIRO) how to find out the shipment number and cost docuemnt number?
    Regards,
    Krishna prasad.

    Hi,
    Please try using SREL_GET_NEXT_RELATIONS. Please try to search on SDN and you should find an example fo this. The only thing you need to pass is the Business Object Name for Vendor Invoice number. Or if you have an alternal field like even PO that you can pass , that will be of great help as well.
    You may want to take a look at:
    SREL_DISPLAY_LIST_OF_NEIGHBORS
    SREL_GET_NEXT_RELATIONS
    Pls reward points if useful.
    Thanks
    Ganesh.S

  • Need help abt Purchase order and material document number

    1)Is there any releation ship between Purchse order number and material document number?
    2) I found aBAPI to get the goods receipt details. That is BAPI_GOODSMVT_GETDETAIL. But it is excepting Material document number and material document year as input parameters.Is there any BAPI to get goods receipt details by using purchase order number?

    hi kiran
    check this thraed. this gives you relatinship between Purchse order number and material document number
    Retrieving Accounting Document number based on PO numbers
    BAPI to get goods receipt details by using purchase order number is
    BAPI_GOODSMVT_CREATE
    thanks
    Sachin

  • Get Idoc structure and contents from Shipment Number

    Hi all,
    We have a 3rd Party Logistics company who wants to send us back minimal shipment data to enable us to update our shipment details.  They want to send us the shipment number, and vehicle information.  My tests (and SAP's documentation) have indicated that in order to modify a shipment via the message type SHPADV, you need to have the complete Shipment Idoc structure filled in in order for the idoc to process successfully.
    My client has indicated that they want to use IDoc processing to manage the shipment updates.
    Does anyone know of a FM that can be used to fill the shipment Idoc structures if only a shipment number is filled in?  Or do the structures have to be modified manually?  For example, these is a function called 'IDOC_READ_COMPLETELY' which populates all the segment details if an Idoc number is entered.  I want something similar, but for a document number, in this instance, a shipment number. 
    Cheers,
    Steve

    Roger,
    Thanks for this suggestion.  I chose to go down another path which I put up here for those who have this problem in the future.
    I have passed the shipment number and just the fields that require modification into user exit EXIT_SAPLV55K_020, and recorded the passed in values into variables.
    I then executed the <b>idoc_output_shpmnt</b> idoc, which, when the shipment number is passed in to the nast-objky field, reads the required shipment data and populates the idoc_data table with the segment details as per sending the document out.  But the FM doesn't actually call the ALE layer, so I then loop through the idoc_data table, modifying the fields that need to change with the values I've saved in the variables, and passed the modified idoc_data tables back into the <b>idoc_input_shpmnt</b> FM.  Worked a treat.
    Cheers,
    Steve

  • Material Movements

    Hi
    We have a custom data source: ZMARACD  created usingMARA,MARD,MARC and MBEW. Now we need Storage location and Storage Bin from MSEG. I wrote start routine and reading the Material movements ODS in to Material plant ODS as we need these fields in to material plant and material movements ODS has them...
    But when I run the full load of ZMARACD , it is taking more than 10 hours with no data to ODS, where as if I remove the start routine logic it is taking less than 10 mins to load...Any idea on why this is not working?

    MARD already has that info

  • Shipment  Number in Subject line of Email for SD Outputs

    SAP ECC is  currently emailing the Bill of Lading of a shipment  to our customer. They have asked us to change the subject line of the email to include certain shipment information - i.e. shipment number, and shipment date.
    I use a Program in the Output Type for other delivery documents and need to replicate it on the shipment side - can someone please tell me the name of the Program that I need to use and the Form Routine that I need to use to make this work? Or if there is a better way to handle this in config, please let me know.
    Thanks,
    Russ

    Hi ,
    refer Snote 325827
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=325827
    Thanks
    Chidambaram

Maybe you are looking for