Shipment of external archive inside of movie clip, is outside of the place

Neste caso não quero criar um movie clipe apartir de código. o movie clip , já existe no palco.
o traço que aparece no canto inferiro da tela indica o arquivo externo, mas como referência o traço está no centro do arquivo.
a referência é o quadro cinza.
Código:
stop();
alvo1.loadMovie("conforto.swf");
o movie clipe esta instaciado como " alvo1" .
estou ultilizando o action script 2.0.
In this in case that I do not want to create one movie clip to apartir of code. movie clip, already exists in palco. the trace that appears in it I sing inferiro of the screen indicates the external archive, but as reference the trace is in the center of the archive. the reference is the gray picture.
stop (); alvo1.loadMovie ("conforto.swf"); movie clip this instaciado as " alvo1" .
I am ultilizando action script 2.0 the reference is the gray picture.

victor, tudo bem?
Eu também estou aprendendo AS só que é a versão 3.
Ai não entendi algumas coisas. No título do tópico você diz que é em AS3, depois, no corpo do tópico você diz que é em AS2?
Também não sei se entendi direito o problema que você está tendo. Dentro do seu arquivo conforto.swf você só tem aquele traço branco ou todo o quadro cinza? Já tentou "brincar" com as propriedades .x e .y do seu movieClip?
Abraço!

Similar Messages

How to use a variable made inside a movie clip from outside

I have been searching for ages and just cant find out how to do this!
i have set a boolean variable inside a movieclip and would like something to change outside the movieclip, using an if statement, depending on whether the variable is true or false, but cant find out how to do it anywhere!
this may be a nob question but any help will be greatly appreciated

Your movieclip will need to have an instance name assigned to it (via the Properties panel). Then you should be able to use that name to target the variable...
mcName.boolVar = etc....

How can I load an external SWF into a movie clip that's inside other movie clip?

Hi.
I creating my first flash (actionscript 3.0) website but I'm
stuck with a visual effect I want to create.
I have a window on my website called contentWindow. Every
time you click a button this window is supposed to leave the stage,
load the requested content and return to the stage.
The sliding window is a movie clip with 83 frames, 21 to
enter the stage, 21 to leave the stage again, 20 for nothing (its
just to simulate the loading time) and 21 to return to the stage.
Now my goal is, when the user clicks on a navigation button,
the window exits the stage, loads an external SWF with the content,
and then returns to the stage.
I've the "window" movie clip with an instance name of
"contentWindow". Inside there is another movie clip with an
instance name of "contentLoader". The content that the user
requested should appear inside the "contentLoader".
Now, when the contentWindow leaves the stage, I get this
error message:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at rwd_fla::MainTimeline/trigger()
If I switch
"contentWindow.contentLoader.addChild(navLoader);" for
"contentWindow.addChild(navLoader);" it works fine, but the
external SWF doesn't move with the window.
How can I load an external SWF into a movie clip that's
inside other movie clip?

Hi,
Recently, I have been putting together a flash presentation.
And I am just wondering if the following might help you, in your
communication with the said swf file:
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
onComplete);
function onComplete(event:Event):void
event.target.content.thinggy_mc.y -= 100;
Not the best example, but this allows you to target a mc
within an external swf file. I think if you look up this code, you
will have an answer ;)
Kind Regards,
Boxing Boom

Flash CS4 Link to a Movie Clip from inside another Movie Clip

I am working on a Flash CS4 project which has 5 buttons with 5 corresponding movie clips all on the main timeline. Everything in functional so far.
My problem is this: I want to be able to mouse click on a particular word in the text inside movie clip 4 ("mc4") and have it link to movie clip 3 ("mc3") (on the main timeline).
I've tried many things, and I can't get it working.
I have tried to highlight the word then link it to "mc3" in the properties panel where it says link (I successfully linked to an email address and to an outside website in other parts of the project)....
I tried to link it in the properties panel to "mc3", I tried & "parent.mc3", "root.mc3";
Linking it this ways seems to be the simplest, logical thing to do, but I don't know what kind of prefix it needs.
Then, I tried making the word (inside mc4) an invisible button (button6) then linking it to the mc3, with it's actionscript in the main timeline with the other button functions.
I tried duplicating mc3 and duplicating invisible button 3 and moving it's hotspot to over the word.
I tried putting a copy of mc3 and the button inside mc4, with the actionscript also inside mc4.
I tried duplicating mc3 and calling it mc6, and putting that inside mc4, with the actions back on the main timeline, and tried again with the actions inside mc4.
I tried with mc6 and invisible button 6 on the main timeline, but that doesn't seem possible.
I tried using this code from Adobe Actionscript 3.0:
button6.addEventListener(MouseEvent.CLICK, startMovie);
function startMovie(e:MouseEvent):void
this.play("mc6"); [and I also tried with "mc3"]
Nothing works!! Please, I would appreciate any suggestions!!
Thanks,
Suzanne

If I limit my attention to the second sentence of your posting, then I suggest the following (borrowing from the rest of your posting)...
If that invisible button6 is inside MC3 (on MC3's main timeline), atop the word you are trying to link to the movieclip, and you just want to make mc4 play by clicking that invisible button6, then assign the following code to the button6 inside MC3...
button6.addEventListener(MouseEvent.CLICK, startMovie);
function startMovie(e:MouseEvent):void
MovieClip(this.parent).MC4.play();
If I missed, then I missed following your explanation.

Button no longer works when inside a Movie Clip?

Again I turn to the almighty Adobe forums for help...
So basically, I've had this problem for over a day now, and I've posted on Experts-Exchange.com... to no avail really.
So here we go:
I have a button in a Flash project I've made. It's used to jump to another place on the root timeline, labelled "Why". It used to work perfectly.
I have now placed the button inside a movie clip (it has to be in an animated sequence), but now it no longer works. It appears to work fine, the rollover state works and all. But when clicked it does nothing.
The code I use to work the buttons goes on the main timeline, the code for this button is:
mc_anim_backdrops_menu.btn_subsection1.onRelease = function() {
gotoAndStop("Why");
_global.swfloaded = "";
Why does it no longer work? and what can I do to fix it?
The question is posted here over at Experts Exchange - http://www.experts-exchange.com/Software/Photos_Graphics/Web_Graphics/Macromedia_Flash/Act ionScript/Q_24888850.html
what we've tried there is tracing the problem. The code seems to be pointing to the right place, but none of the actual function works.. as you'll be able to see if you open up the attached file (and change it's extension from .txt to .fla to get it working)
So would someone be able to open it up, have a look and tell me what's wrong? Because I'm stumped. And frustrated.

My guess is that you have a scope problem. By putting the button inside a movieclip you have made the buttons scope the same as that clip.
So if you add a trace inside the release event handler, what do you get?
trace("My current scope is: "+this);
I'm guessing it is "_level0.mc_anim_backdrops_menu," right?
So since you are using the global function of gotoAndPlay() it is looking for that label in the current timeline and not finding it.
You should probably use the MovieClip method and specifiy which timeline it should look in.
_root.gotoAndPlay("Why");
_level0.gotoAndPlay("Why")
_parent.gotoAndPlay("Why");
both would probably work. I would never use the first two, other than to make sure that there wasn't something else going on...

Movie clip inside a movie clip

Hi everybody,
I'm creating a slideshow with Flash, like the ones done with Powerpoint. I would like to create a movie clip inside another movie clip, that is, say I have a clip called button1, and when I click it, frame number 2 in this clip is displayed, and then more information appears. Inside this frame 2, there are other clips, for example an X button to close and return to frame number 1 in the clip button1, as the image shows:
What I have done is convert the button1 text into a movie clip, and assign an action to it:
on (press){
    gotoAndStop(2);
When frame 2 is displayed, I would like to click to the X-button to get back to frame number1, so what I've done is, again, convert it into a movie clip and assign the following action:
on (press){
    _root.gotoAndStop(1);
But this doesn't work. I've been trying as well changing other things, but no way... At first I thought it had something to do with the _root or _parent, but now it looks as when using gotoAndStop in the "parent" button (button1), no actions work for the "child" buttons.
I've loaded the fla and the swf files here, just in case someone would like to check.
Thank you very much in advance for your help. I've been checking other posts, but apparently I couldn't find the appropriate info.

"_root" is only used to reference the very first level of your flash file. Right now you are telling flash to go to the second frame in your root timeline but you want to go to the second frame in your button1 timeline.
Change the code that is on the X-button to
on(press){
     gotoAndStop(1);
Remove the "_root" and it should work.
If it still doesn't work, make sure the button has an instance name of "button1" and use this code.
on(press){
     _root.button1.gotoAndStop(1);
This is using "_root.button1" as the 'address' of your movieclip and it wont matter where the code is.

Going Back to the main frame, from inside a movie clip time line.

In flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line..
Can anyone help me?
Thanks
Daniel Derrick

your can use _root to reference the main timeline from anywhere though that can lead to problems if your swf is loaded by another swf. because of that eventuality, it would be better to use a relative path back to the main timeline.
so, from a movieclip's timeline (when the movieclip is on the main timeline), you can use _parent to reference the main timeline.
but even better would be to use no code on that movieclip's timeline and keep all your code on one timeline (the main one).

Button inside a movie clip

Ok, i'm new at action script so i have a problem
I have a sound inside a movie clip (sound_MC) in the main
timeline, and i have another movie clip with a button inside, and I
need that button to control that sound movie clip
on (release) {
gotoAndStop("off_radio"); // this goes to another frame in
the movieclip with the button (works fine)
on (release) {
_root.gotoAndPlay("stop_loop"); // this goes to another
frame of the sound MC (doesn't work)
// i have this in the stop button
on (release) {
gotoAndStop("on_radio");
on (release) {
_root.gotoAndPlay("start_loop");
// and this for the play button
whats the code for that ?
what should i do?

i solve the problem !! :-D
but now i hold like to now how i make a fade out sound
command when i enter a frame and a fade in when i enter in another
frame
here are the examples:
http://tubo_centeno.web.simplesnet.pt/problem/problem.html
http://tubo_centeno.web.simplesnet.pt/problem/problem.fla
can anyone help me?

Unable to edit Flash file - Can't enter inside buttons/movie clips.

Hi
I am in the middle of creating a website using Flash CS5. I opened up my .Fla file one day to continue my work but I am no unable to access buttons and movie clips. When creating movie clips or buttons I am unable to get inside them, when I hover my mouse over them there is a white hand icon which never used to be there it was always just a normal mouse icon. I double click to enter inside the buttons/movie clips but nothing happens. This happens to existing movie clips and buttons on the page and even when I create new ones. Can anyone please help.. I really don't wanna have to start this website again!!
thanks!

Hi,
This would normally happen when you have a Button symbol on stage and the 'Enable Simple Buttons' setting is enabled.
Can you check in your Control menu, if the option 'Enable Simple Buttons' is enabled? If it is, click on the option to disable it and then try double clicking on your symbols.
In case you still face the issue, can you send across your test file for investigation.
Thanks!
-Nipun

TextArea link inside a move clip

The actionscript calls textArea to have a rollover action and
then link to another site when released. However when placed inside
a movie clip the rollOver works but not the link. I need someone to
tell me what syntax I'm missing. It's gotta be possible.
Please help.
Here's the Code:
var feature_styles:TextField.StyleSheet = new
TextField.StyleSheet();
feature_styles.setStyle("backgroundColor", 0x000000);
feature_styles.setStyle("mainbody", {color: "#333333",
fontFamily: "FFF Hero", fontSize: "8", display: "inline"});
feature_styles.setStyle("a:link", {color: "#333333",
fontFamily: "FFF Hero", fontSize: "8", display: "inline"});
feature_styles.setStyle("a:hover", {color: "#FF0000"});
background1_mc.textbox_1.links_1.label.condenseWhite=true;
background1_mc.textbox_1.links_1.styleSheet = feature_styles;
background1_mc.textbox_1.links_1.wordWrap = true;
background1_mc.textbox_1.links_1.html = true;
background1_mc.textbox_1.links_1.label.selectable=false;
background1_mc.textbox_1.links_1.editable=false;
background1_mc.textbox_1.links_1.vScrollPolicy = "off";
background1_mc.textbox_1.links_1.hScrollPolicy = "off";
background1_mc.textbox_1.links_1.embedFonts = true;
background1_mc.textbox_1.links_1.text += "<a
href=\"Fall08images/downloads/FALLOUT_1600x1200.jpg\"
target=\"_blank\">1600 x 1200</a><br>";
_global.styles.TextArea.setStyle("backgroundColor" , "none");
_global.styles.TextArea.setStyle("borderStyle", "none");
_global.styles.TextArea.setStyle("borderColor", "none");
stop();

Try:
background1_mc.textbox_1.links_1.htmlText += "<a
href=\"F...

Link a button inside a movie clip to a scene

I am trying to link a button that is inside a movie clip to a scene. The button has the instance name "cosmetic_btn" and the scene is called "Cosmetic Treatments".
On my main timeline I have the code:
cosmetic_btn.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(evt:MouseEvent):void {
gotoAndStop(1, "Cosmetic Treatments");
And on the timeline inside the movie clip I have this code:
MovieClip(root).gotoAndStop("Cosmetic Treatments");
When I run the document I get the following error:
Home, Layer 'actions', Frame 101, Line 1
1120: Access of undefined property cosmetic_btn.
I have the instance name "cosmetic_btn" set on the button so I am unsure what is wrong here?
http://img600.imageshack.us/img600/3236/gp2g.png

One other thing you should correct is to add a frame number/label for the line....
MovieClip(root).gotoAndStop("Cosmetic Treatments");
otherwise you are likely to get an error regarding there not being a frame with that label

Reaching a movie on the stage from inside another movie clip

I'm trying to reach a body of text which i turned into a movie clip which is on the main stage, and have it scroll up/down whenever it rolls over the designated hot spots. Here's what i have.
stage.addEventListener(MouseEvent.MOUSE_MOVE,down1,false,0,true);
function down1(e:MouseEvent):void {
     if (mouseX>=0 && mouseX<=42 && mouseY>111.1 && mouseY<146.1) {
          stage.addEventListener(Event.ENTER_FRAME,scrolldown1);
     } else {
          stage.removeEventListener(Event.ENTER_FRAME, scrolldown1);
function scrolldown1(e:Event):void {
     if(MovieClip(this.root).resume_txt.y > 219) {
          MovieClip(this.root).resume_txt.y += 5;
     } else {
          this.removeEventListener(Event.ENTER_FRAME, scrolldown1);

Can you explain the purpose bhind these lines...
     if(MovieClip(this.root).resume_txt.y > 219) {
          MovieClip(this.root).resume_txt.y += 5;
It seems as though if it is >219, it will move until the mouse moves out of the region. Is there any specific aspect of it that you can pinpoint as not woking?.

Target a movie clip inside a movie clip

When I go to the symbol editing mode on the first movie clip, I drag the instance of my 2nd movie clip to the stage. I then am duplicating my work, (it is over lapping) not sure what I am doing wrong here? and I am finding that my child movie clip is taking on the parent movie clip properties. How do I stop this from happening? I thought they are to remain independent? Any help is greatly appreciated. TY.

Will the child timeline be independent of the parent timeline. My pend_mc is the child and has taken on the hand_mc properties. Also why is there brackets around some and not the others? Thank you so much for your time.

What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

Per http://www.apple.com/ipad/specs/
AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Using Flach CS4 and action script 2.0 how do I advance to a specific frame of the main timeline when a movie clip instance come to the end of its timeline?

Using Flach CS4 and action script 2.0 how do I advance to a specific frame of the main timeline when a movie clip instance come to the end of its timeline?

code on the last frame of your movieclip instance:
_root.gotoAndStop('whatever_frame'); // will work unless this swf is loaded into another swf. in that situation, you should use a relative path to the main timeline (eg, _parent or _parent._parent etc).

Shipment of external archive inside of movie clip, is outside of the place

Similar Messages

Maybe you are looking for