Shipment - Output - Printer

In transaction VT03N, the menu option Shipment - Output - Printer is enabled from the first screen i.e. screen 1011 but is disabled in the second screen i.e. screen 1020.
All Output Control Settings including VV71 are maintained. Does anybody know how to enable "Printer" option in the second screen of VT03N ? Please let know if any further clarification is needed.
Thanks

hi,
The only note related with your explanation is 300690 but valid for old releases.
Concerning VT02n check 1429437 and 1537993.
Best regards,
david

Similar Messages

Shipment output

Hi all,
The requirment is such that only when the delivery in the shipment is PGI'd the output should be triggered
Should I write a logic and assign the requirment in the access sequence for acheiving the above?
Please help me.Thanks in advance
Regards
Mano

Hi Mano Ranjan,
You can get this requirement through configuring the Output determination for Outbound deliveries.
To do this IMG path is
SPRO>Logistics Execution>Shipping>Basic shipping functions>Output control>Output determination>Maintain Output dtermination for Outbound deliveries.
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedure
In the output determination procedure you maintain the Routine 1-Delivery GI posted for your output type.
You maintain the condition records with the printer details in VV21 transaction.
Now you can able to get the delivery output print automatically when the completion of the PGI.
Thanks!
Preethi
Edited by: preethi R on Nov 27, 2008 8:18 AM

Driver Program Name for Shipment output form

Hi guru's
can anyone tell me wats the name of the driver program and the form name for a shipment output form?(for ABAP development purpose)
Thanks in advance,
Regards/Aryan

Hi Aryan - What Shipment output are you referring to? LD01-Delivery Note? There are some more, which are associated with Transportation application as well.
LD01 - V2 - Program SDADDN02. Form SD_DELNOTE_SUPPL
LD00 - V2 - Program YMRVADDN01/RVADDN01 Form ZMLWMRVDELNOTE(customized our side)/RVDELNOTE
Pl00 - Packing List -V2 - Program SDPACKLI, Form SD_PACKING_LIST
CMR1 - Bill of lading - V7 - Progarm RVADTR01 Form SD_SHIPMENT_CMR.
Best way, use transaction V/34 to view all V2 - Shipping output types and the associated program and form. V/82 to view all V7-Transportation output types and the associated program/forms.
Thanks
Nikhil

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
Any one with ideas/

What is your screen resolution?
What operating system?

EDI Shipment Output Master Data Conversion

Hi,
I am using LSMW to upload EDI Shipment Output Master Data into file can anyone suggest me any standard BAPI or Idoc avail for the same or any function module available to do this.
Thanks
Dhirendra

we have below LSMW IDOC methods
OILSHL                          TD Shipment to TAS
RECSHP                          Recommended shipments
SHIPMENT_CREATEFROMDATA         Create shipment
SHIPPL                          Inbound planned shipments
SHPMNT_TNDR                     Shipment tendering
TPSSHT                          Shipping planning system: Transfer planned shi

Default shipment output type for customer

HI ALL,
I have 2 shipment output type. is it possible to assign one of them to the specific customer.
Thank you & best regards,
Saiful arif

Dear Arif ,
This is possible through standard SAP . Please note as given below :
1. In customer master sales tab --> Additional data , where u have some blank fields , select one of the field for this purpose and mark this field only for special customer indictor .
2. Then Add this filed in one of the access of the out put .
3. Maintain out put records for this access .
4. Create sales order for this special customer , the out put is populated in the sales order.
Sorry , i am not able to give example of the field in customer master which can be used as i am not have access presently .
Try this out ans let me know if you have any problems
Regards
Veera

Shipment Output Determination: Sold To Party needed in the access seqeunce

Hi Gurus,
I need to create a new access sequence for Shipment Output determination including the Shipment Type, Shipping Point and Sold-To party.
Can someone provide the steps involved to add the Sold-To party in the access sequence and the enhancement which I can use to populate the Sold-To party field.
Thanks in advance for the help.
Gajendra

Murali,
Thanks for your reponse. The way you suggested I have tried creating a new access table but the issue is Sold-To field is not available as a selection in the field catalog when you are in create access table screen (spro->Logistics Execution->Transportation->Basic Transportation Functions->Output Control-> Maintain Output Determination for Shipments->Maintain Condtion Tables->Maintain Output Condition Table for Shipments).
When I go to the field catalog maintenance (spro->Logistics Execution->Transportation->Basic Transportation Functions->Output Control-> Maintain Output Determination for Shipments->Maintain Condtion Tables->Field catalog: Messages for transportation) the field KUNAG - Sold To Party does exist in the field catalog. However this doesn't show up on the access table maintenance screen as an available field.
Could you please explain how to make this field available for access table maintenance?
Regards,
Gajendra

Lpq outputs print jobs + error T: unknown: moving-to-paused +

Dears,
I have setup remote printing, printing from the client show the print queue at print server(T) however command does not get executed and it outputs
print jobs + error "T: unknown: moving-to-paused"
When is triggered lpstat command before printing
# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T is idle. enabled since Sun Feb 19 12:03:31 2012. available.
When is triggered lpstat command After printing
bash-3.2# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T waiting for auto-retry. available.
Failed to open the printer port. (Device busy)
T-80 [email protected] 201097 Feb 19 12:28 f iltered
T-81 [email protected] 600569 Feb 19 12:28 f
lpq
===
bash-3.2# lpq
T: unknown: moving-to-paused
Rank Owner Job File(s) Total Size
1st appltest 80 /global/u02/oracle/TEST/inst/app201097 bytes
2nd appltest 81 /global/u02/oracle/TEST/inst/app600569 bytes

Hi Freind,
I hope you are doing good.
Q1l:-
Are these printers really physically attached to your Ultra-* parallel port (/dev/ecpp0)?
and what device is "/dev/lp1"?
Answer:-
"/dev/lp1" which is printer "T" and "/dev/ecpp0" which is printer "Alis" are configured at OS level via "printmgr" on the same machine.
This machine hostname is "tprinter" which is a print server. It is connected physically to "CIMA6120 LINE PRINTER".
[what I meant is: what physical port is this printer attached to on the Solaris machine? is this a Ultra 5/10/60 machine? I don't recall the /dev/ecpp port
existing on any modern sun hardware]
"failed to open printer port" can mean:
Answer2:- It's is a 25 pin serial port cable connected to 25 pin parallel port of Optiplex GX100 machine. I installed solaris 10 x86 to make print server. as our CIMA6120 its not a network printer, and our company want to print reports from oracle application to this printer.
Q:-you have attached your printer to the wrong port?
Answer: it is connected to the correct port.
[again . . how do you know this or test this?]
Answer2:- it is connected at the rare panel of the machine on a 25-hole connector (bidirectional).
Q:-you have attached your printer to the right port, but are using the wrong name?
Answer: I think we could have Alias, not necessarily give the same printer name.
[what i was getting at here is that you think the printer is attached to the parallel port, but actually the cable
is actually attached to the wrong port. For example the serial port on those older machines will fit but in that case, if you configure the printer with ecpp
it's not pointing to the correct port]
Answer2:- I configured CIMA6120 with "/dev/lp1" port which was perfectly working, I print numerous pages with this configuration, Suddenly this error "moving-to-paused" occurred. as i said it is connected to the parallel port at the rare panel. Initially, I attempted and tried to configure this printer with "/dev/ecpp0" port which was not successful.
Q:-you have a bad or wrong cable?
Answer:- I have checked the cable it is good.
[how did you do the checking?]
Answer2:- I tested the cable by connecting to other printer and it printed. so no problem with the cable.
In the olden days when local printers like this was the norm, we'd do test like catting a file to the port and see if the printer lights
up or responds. Something like: cat /etc/hosts > /dev/ecpp0 (or /dev/lp1, or whatever the device is). Then observe if the printer seems to
receives anything, blinks, prints the host file. You are copying the file directly to the port outside of lp or other mechanism.
Answer2:- I agree there was some conflict among the ports internally, or some process may be running at the background, that is why though it shows the request waiting in the queue it was moving to pause for some reason. when I check the error by command "lpstat -t" it sez "device busy" in /dev/lp1" file.
Solution
============
After goggling some more I found a fix for this issue at http://fixunix.com/solaris/143011-unaccepted-printer.html
1, I tried to remove the printer from printmgr, cud not remove it.
2, try kill the entries that going to /dev/lp1 port to printer "T". could not do it
3, uncheck the default printer option via printmgr.
4, Add a new printer name "test" with /dev/ecpp0" and reproduce the issue "got the same error"
5, With the forum above it sez its a "bug" and the Bug ID: 6374608. here are the details of it:-
Synopsis: No /devices entry for line printer
http://bugs.opensolaris.org/bugdatab...bug_id=6374608
Workaround is to manually install the missing driver binding
entry, using the command:
update_drv -a -i '"lp"' ecpp
This workaround should create the missing /dev/lp* devices. And after
running it, you should find the following line in "prtconf -D" output:
lp, instance #0 (driver name: ecpp)
6, I unplug the serial cable from the printer and turnoff and replug the serial cable to the printer and turn on the printer, made sure printer is ""ONLINE".
7, I restart the Solaris machine and delete the newly created "Test" printer via printmgr.
7, I just gave the lp /etc/passwd and it printed.
Finally, I thank you for your time and suggest me your opinion on this solution please.
Regards,
MKY
Edited by: user9007339 on Feb 22, 2012 12:15 AM
Edited by: user9007339 on Feb 22, 2012 12:21 AM

Shipment Output determination based on shipment status.

Dear all,
In T code VT01N we are facing some issue.
The issue is like when am selecting the Shipment button and saving at that time the output type is trigging.
Actually the output type should trigger only after the shipment completion.
Could any one kindly suggest any way for Shipment Output determination based on shipment status.
<removed by moderator>
Thank you,
Niketh
Edited by: Thomas Zloch on Oct 8, 2011 8:21 PM

I think you have to write your own REQUIREMENT CODE under the outpout type .

Shipment output condition record

Hi all,
The Shipment output condition record is maintained which can be seen in T code VV73(V7 application)
This is stored in the table B999.In this table iam getting the condition record number but there is no condition record creation date
I want to know when the condition record was created.Which table can i get this Info
Thanks in advance
Regards
Mano

Dear Mano,
Go to SE16 transaction enter NACH table then press enter system will take you to the selection screen here you enter Application as V7-Transport and enter your shipment output type then execute now system will give data details in that table in that you can find the Created on colomun which is relevent to created date.
I hope this will help you,
Regards,
Murali.

OTF Module: Failed to output print data

hi all,
while seeing output on the screen i am getting this error on the status bar:
"OTF Module: Failed to output print data"
any one can help me in this regard why this error is coming i am working on ECC.6

Check this may give you some idea to solve your issue...
Rough idea
**Set printer parameters
control_param-no_dialog = 'X'.
      control_param-preview = ''.
      control_param-getotf = 'X'.
      output_opt-tddest = 'LOCL'.
      output_opt-tdimmed = ''.
      output_opt-tdnewid = ''.
      output_opt-tdnoprint = ''.
      output_opt-tdnoprev = 'X'.
Get smartform name
call function 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
            formname           = formname
            variant            = ' '
            direct_call        = ' '
       IMPORTING
            fm_name            = fm_name
       EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            others             = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Call smartform
call function fm_name
           EXPORTING
                control_parameters = control_param
                output_options     = output_opt
                user_settings      = ' '
                wa_head            = wa_head
           IMPORTING
                job_output_info    = job_info
           TABLES
                int_detail         = int_detail
           EXCEPTIONS
                formatting_error   = 1
                internal_error     = 2
                send_error         = 3
                user_canceled      = 4
                others             = 5.
Note pass the job info file you got from above function module
data: int_docs type standard table of docs,
        int_line type standard table of tline.
call function 'CONVERT_OTF_2_PDF'
         IMPORTING
              bin_filesize           = filesize
         TABLES
              otf                    = job_info-otfdata
              doctab_archive         = int_docs
              lines                  = int_line
         EXCEPTIONS
              err_conv_not_possible = 1
              err_otf_mc_noendmarker = 2
              others                 = 3.
USE below function module
all method cl_gui_frontend_services=>gui_download
        exporting
          bin_filesize            = filesize
          filename                = filename
          filetype                = 'BIN'
        changing
          data_tab                = int_line
Regards,
SaiRam

Datamax label print - no paper output - print spool ok

hi
we are trying to configure a label printer (Datamax I 4208), we've followed this document http://www.datamaxcorp.com/_assets/library/pdf/sap_91803.pdf and note 894444
print spool orders are marked as completed but there's no paper output
printer is configured on a tcp/ip address
sapsprint is installed and service active
what else are we missing is there to check?
thanks in advance

Hi Maria
We are trying to print Datamax i4208.
Here is my Configuration
The app.server is on AIX
The Device types we tried:
               <h5> The LB_DMX LB_DMX as Device Type: LINE PRINTER DRIVER II.
               The ASCIIPRI </h5>
1. Printed through LOCL (Front-End Access Method)    - We do not have SAPPrint/saplpd on our PCs
2. Printed through a Windows Printer Server (U: Access Method) - The Winddows server has SAPPrint
3. Printed Locally (L: Access Method): Using the JetDirec setup
All these 3 methods are not working.... I am a Baiss person.... Would you please give some tips

Lightroom output prints are too light

I have to make 30-40 prints for a project and decided to try the Lightroom print module. The prints will be output from existing layered psd master files, most of which are in either a ProPhoto or Colormatch color space.
I imported a folder of master files into LR and opened one up in the print module. On the up side: I love the LR interface, the ease of going through the check list (seems easier and less confusing than the print box in photoshop), the ease of adding custom text (very handy for captions!), and I ESPECIALLY love checking the box to center the print and actually having it centered properly in the output print (unlike needing to monkey with the "left=" numbers or visually play with the location of the image on the page in the CS2 or CS3 print box). Its been a big pain for the last few years in CS2 to never quite have the darn thing centered when printing on my Epson 2200. I was thrilled that in LR the centering actually worked!
On the down side to printing in LR (and this is a BIG down): the prints are a good full stop lighter than the ones I print from CS2 or CS3. When printing from CS2 or CS3, with a profiled monitor and use of the proper printing profile, I get pretty close to WYSIWYG most of the time. I'm getting WYSIWYG in Lightroom (the output print DOES look like the monitor), but what I see in the print module window is a good full stop lighter than what my imported master files look like when opened and printed from photoshop. And the LR print comes out correspondingly lighter.
For final output printing of art or presentation prints, I generally will want to use a layered, polished, file that I have tinkered with in photoshop. LR still does not have enough features to do everything I need to create that kind of final print or delivery file.
So my question: why the mismatch between the appearance of a master file in CS2/CS3 and LR? Is there any way to correct this? I would love to use LR to output my prints, but as it is its not a good idea.
One last thing: I have been a big fan of PhotoKit Sharpener both for capture sharpening and for output sharpening. Is there a way to use it in a LR workflow? I'm particularly interested in using the output sharpener for prints, which is wonderful and has always done a great job.
Thanks for any feedback or insight.
Info background: I am using a dual 2GHz G5 PowerPC with 3.5 GB ram, running OS 10.4.10, using LR 1.1, as well as photoshop CS2 and CS3, printing with an Epson 2200.
Paula Lerner
http://www.lernerphoto.com

Jeff et al:
I did as you advised, and imported another folder of layered master files into LR. The first folder that I imported I had used the "none" development preset. On the second imported folder I used the "Zeroed" preset as per your suggestion.
The first ones were too light, but the second ones were a significantly better match. I have to say the image as viewed in the LR window is very close, although still not identical, to the image as viewed in Photoshop. For some reason the LR has a slightly more yellow cast, while the original in Photoshop is a bit more magenta. I made two prints from the same image, one via LR and the other via Photoshop, and you can see the same respective yellow or magenta cast in the prints. The LR print is also slightly muddier (but only marginally).
I read on another thread started by John Vitollo called "Anyway to turn off 'Apply Auto Tone Adjustments' with Tiffs + PSDs?" that John was also having problems with PSDs appearing too light in LR. Lee Jay told him to turn off the "Apply Auto Tone Adjustments" in the Edit > Preferences > Presets (top box). I found that this option was enabled for all of the instances above, so my guess is that "Apply Auto Tone Adjustments" overrides "none" in the development module pull down menu during import... Don't know if this is something that needs to be fixed...?
In any case, given that I have successfully printed 10 images in Photoshop, for this particular project I will probably continue printing in PS so as to be able to match the tone and formatting. For future I will try to figure out printing in LR, but as of now I can't see any particular advantage to printing in the LR print module (except for the nice centering feature). When I imported and copied my layered master files into LR, it took a verrrrrry long time, and wasn't worth the time investment. Also am not sure what's causing this slight color shift, and don't want to invest in making a lot of prints till I can sort that out.
Any additional suggestions or comments are welcome.
Many thanks,
Paula Lerner
http://www.lernerphoto.com

Output print problem

Hi.
I'm trying to get an output print to a local printer. I am getting this message "Frontend unavailable" when I try it using my ID.In output controller STATUS TEXT is cuming FRONTEND UNAVAILABLE.
Can u help me so that i din't get this message FRONTEND UNAVAILABLE.

hi rishu
is ur program run in background?
thanks
Sachin
Edited by: Sachin Gupta on Jul 28, 2009 5:26 PM

Printing: The outputs print on a printer other than that specified on the u

We are using activity profile on the shipment to trigger outputs at different statuses set on the shipment document. In order to have the output trigger based on activity profile we need to have the timing for these output types set to 3. Now the outputs set in the activity profiles are proposed on the sales document the first time the document is saved by the user. The communication details for the outputs proposed have the details from the user data set in the user master (SU01) for the person who saved the sales document as the print parameters for the output is S (user parameters).
The issue is we want the system to print outputs proposed on the sales document to different printers. E.g. The bill of lading output on the shipment document is required by the shipment planner to provide the same to the truck drivers. However the documents like pick list are required by the loaders loading the packages in the warehouse. Hence the documents need to be printed in different printers. How do we achieve this when the outputs proposed at the time the sales document is saved have the print parameters form the user data of the user who created the document?

Hello,
Have a look here:
http://help.sap.com/saphelp_erp2004/helpdata/EN/7e/36e4c4023411d399b70000e83dd9fc/frameset.htm

Shipment - Output - Printer

Similar Messages

Maybe you are looking for