Shipment process without delivery is it possible?

Hi,
My company wants to track the shipment of parts scrapped (sap mvt type 551) and sent to the vendor throught the shipment.
We are already using transportation for outbound delivery and WM.
The current process is : 1- mvt type 551; 2- Create TO; 3-Confirm T.O and sent parts to vendor for scrap.
We would like integrate the shipment in the this process.
Can you help me to figure out the integration with the shipment process?
Thanks & Regards
Bouba

Bouba,
Check your IM to WM interface  configuration setting
IMG: Logistics Execution > Warehouse Management > Interfaces > Define Movement Types >>Assign WM Movement Type References to IM Movement Types & >> LE-WM Interface to Inventory Management
Based on your error message (551/X/X/ /L/X/./) your current settings in "Assign WM Movement Type References to IM Movement Types" are as follows:
> IM Mvt type = 551 (GI scrapping)
> VUp = X (Yes, update Value)
> QUP = X (Yes, Update Quantity)
> Special Stock = Blank (No special Stock)
> Movement Indicator = L (Delivery)
> Recipeint indicator = X (Stock Transport Order)
> Ref Mvmt type = Blank (No WM Movemnet type)
Your reference movement type should not be blank - recommend changing it to 551
Also, make sure that IM mvmt type 551 is linked to Warehouse mvmt type 551 in LE-WM Interface to Inventory Management with all of the correct settings as above.
I hope this does the trick for you.

Similar Messages

  • Inter company process without delivery and billing

    Dear All,
    My client needs to do inter company process without delivery and billing. So I have done inter company process same as like intra company transfer.
    I have used document type NB.During MIGO i got a error "No accounts maintained for  company code clearing account.
    So in OBYA we have maintained Inventory account and clearing account.Since it is cross company code transaction we need the G/L 900150 to get nullified.
    Example: 470001- Inventory account credit in paying company code and clearing account 900150 debit in same company code
    Company code- X
    470001 Dr
    900150 Cr
    900150 Dr---the clearing account will be shown in balance sheet so this account has to be nullified
    900150 Cr---the clearing account will be shown in balance sheet so this account has to be nullified.
    Company code Y
    900150 Dr
    470001 Cr
    But in OBYA there is possibility to assign only two GL accounts, but the client requires the above entries to be passed. Where can i assign the third GL in OBYA or any other possibilities.
    I have already posted in MM.
    Please help me to solve this issue
    Regards
    Subbu.

    Hi ;
    Can you research oss notes ?
    http://www.sap4u.org/media/userfiles/articles/pdf/23.pdf
    Also , please look at above document.
    Regards.
    M.Ozgur Unal

  • Intercompany STO Process without delivery

    Hi All,
    There were so many posts based on STO process. But i couldntt find any post which could solve my issue. So, i decided to post a new one.
    The scenario is as follows
    Plant A from Company A raises a STO PO to Plant B of Company B. Plant B does the manufactucturing of goods and issues the goods to plant A.
    Business requirement is such that when plant B issues the goods to plant A, they want to automate the GRN at plant A? ie when they do the GI, GRN should take place in the plant A
    I went through the one step process in SAP, where when i do movement type 351, goods are issued but movement type 101 does not take place automatically. Further, business doesnt want to do delivery as they find it as a non value addition to their business process.
    I am not sure if there is any solution in SAP. If not can anyone suggest a workaround?
    Thanks
    sapdt

    Dear jurgon
    I Think you are missing one important thing, UB is not for inter company --for interplant of same company code
    Order type NB is for intercompany
    ●     Item category BLANK (cross-company-code)
    ●     Item category U (intra-company-code without billing document)
    GI: 643
    (2 steps)
    GI: 645
    (1 step)
    GR: 101
    Thanks
    Jeevan

  • VT01n(shipment Processing) User Exit

    hi experts,
    requirement:
    to check the Plate number(VTTK-EXTI1) field if it is maintained in the customize table .
    question: is there any user exit that will check the input PLate number ?
    thanks all.

    Hi
    Check with BAdi BADI_LE_SHIPMENT
    Take a look at the following list ( for VT01N) :
    MV56AINI            Initialization of transaction control for transportation          
    V56AFCCH            Shipment processing: Check function code allowed                  
    V56AGTAR            User Exit for Filtering Shipping Unit Calculation                 
    V56ARCHV            Customer-spec. checks for archiving shipments                     
    V56ATKTX            Change the number of lines for text input in shipment             
    V56BMOD             Transportation processing: Field modification                     
    V56DISTZ            Shipment Processing: Determine Distance                           
    V56FCOPY            Shipment processing: Copy delivery data                           
    V56FSTAT            Shipment processing: Activities when setting a status             
    V56L0001            Status of Shipments for a Delivery                                
    V56LDELI            Read Delivery Data for Shipment Processing                        
    V56LOCID            Shipment Processing: Determine Location Identification            
    V56MVT04            Extensions for Collective Processing of Shipments                 
    V56SLDET            Shipment processing: Leg determination                            
    V56TDLIF            Filter Delivery Items for Shipment                                
    V56UCHCH            Shipment processing: Check whether changes were made              
    V56UCHCO            Check shipments are complete                                      
    V56UDLUP            Obsolete as of 4.6C: Delivery Update on Delivery Routines         
    V56UNUMB            Shipment number allocation                                        
    V56USTAT            User-individual definition of transportation planning status      
    V56USVDO            Update new objects for transport                                  
    V56USVDP            Preparation for updating new objects for transport?    
    <b>Reward points</b>
    Regards

  • Is delivery functionality related to process in SAP CRM7.0 possible?

    If we have to upgrade from R/3 to CRM7, which of the following functionalities are supported both in CRM and R/3
    1. You client want to add CRM to an existing R/3 landscape.
    As part of your analysis, you need to decide how the process flow should take place between
    R/3 and CRM.
    Which of the following functionality related to processes in CRM also exists in R/3?
    A. Pricing
    B. Delivery
    C. Email management
    D. Campaign Management
    Is delivery functionality related to process in SAP CRM7.0 possible?
    Please suggest.
    Thanks

    Hi Sumit,
    you may move your question to the ABAP for SAP HANA community (http://scn.sap.com/community/abap/hana).
    Are you asking about the SAP_BASIS version, or which version do you refer to?
    Best,
      Jasmin

  • Inter Company STO without delivery

    Hello All,
    I have a scenario related to STO for both inter and intra company. Please guide me.
    a) For intra company , we will be using UB type
    b) For inter company without delivery, do wehave to use NB type ( correct me if am wrong and can anyone please provide configuration settings for without deliveries. )
    Client is using third party software which will create Transfer order ( which is both intra and inter ). When this Orders is comming into SAP, they will send 3 different cost which should hit the GL account.
    a) actual cost  b) shipping location floor cost ( maybe transfer fee or markup ) c) reciving loation floor cost.
    Ex: Shipping location  cost   -- $50
    Shipping location floor cost  -- $55
    Receving location floor cost -- $ 54 
    Client wants SAP to determine the difference and post it into GL accounts of shipping and reciving location.
    Regards,
    SAP MM

    What you want, I think this is unrealistic,
    If you two G/L account will debit, then two G/L account must be credit...
    In OBYA, this is just for cross company code, to post the amount to G/L for company code clearing account..
    This is not possible to enter third G/L account to this company code clearing for inter company process.

  • Closing Sales Order manually without delivery!

    Hi All,
    I have come across a very unique requirement in our organization.
    Business Scenario: We need to close the sales order without delivery for few orders, we have third party products which will be shiped by them and they will be sending delivery and tracking numbers and this will fullfil our order, so we have to close the sales order as soon as tracking number updates happend at sales order by the input file received from third party.
    Now, at present all sales order status is autoprocess,it will change to close only when delivery gets created in our system...so can we still close the sales order without delivery for  few of them ?
    if so, if we update status tables programtically, will it have.any impact on the system? if so, what is the best method to address this requirement...that is for few orders we need to change the statuswithout delivery .
    Thanking you in advance!
    -Ravi

    Hi Ravi,
    In SAP, you can always close/delete the sales order if there is no delivery. However your delivery process is little confusing, you can put it in more understandable words if possible. For ur process, you are the best person to analyse the implication and take a decision. But in SAP, as I said, it is possible to close/delete SO when there is no delivery and invoice for it.

  • Shipment process related.

    Hi Gurus..
    Can U PLZ explain me in Steps the Shipment process.
    Info like Pre requisites, Steps n follow on procesess asssociated with Shpment creation.
    Also let me know id f we need to create a shiment doc only after creation of a del doc or can it be created simeltaneousl with a del doc.
    Also the necessary confg steps.
    No links PLZ
    Sure  to award points to gud replies.
    Best Regards,
    Subbzz..
    Edited by: Subba Rao on Aug 7, 2008 12:33 PM

    Hii ,
    *Transportation Configuration:*
    Process 1
    Step: 1
    Maintain Purchase Organization
    Path: Sprou2014Enterprise Structureu2014Definitionu2014Materials Managementu2014Maintain Purchasing Organization.
    Step: 2
    Create Purchasing Group
    Path: Sprou2014Materials Managementu2014Purchasingu2014Create Purchasing Group.
    Step: 3
    Maintain Transportation Planning Point to Company Code.
    Path: Sprou2014Enterprise Structureu2014Definitionu2014Logistics Executionu2014Maintain Transportation Planning Point
    Step: 3A
    Assign Transportation planning point to company code.
    Step: 4
    Assign Purchasing Organizations to Company Code.
    Path: Sprou2014Enterprise Structureu2014Assignmentu2014Materials managementu2014Assign Purchasing Organization to Company Code.
    Step: 5
    Assign Purchasing Organizations to Plant.
    Path: Sprou2014Enterprise Structureu2014Assignmentu2014Materials management-- Assign Purchasing Organization to Plant
    Step: 6
    Create Vendor Account Group
    Path: Img u2014Financial Accountingu2014Accounts Receivables and Accounts Payablesu2014Customer Accountsu2014Vendor Accountsu2014Master Datau2014Preparations for Creating Vendor Master Data--Define Account Group
    Step: 8
    Create Vendor
    T-Code: XK01
    Step: 9
    Define Modes of Transport
    Path: Sprou2014Logistics Executionu2014Transportationu2014Basic Transportation Function---Routesu2014Define Routesu2014Define Modes of Transport.
    Step: 9A
    Define Shipping Types
    Path: Under the Same Menu path---Define Shipping Types
    Select New Entries and Assign the Shipping Type (e.g. Road or Train) and Assign Mode of Transport (Mdtr) and Assign Shipping type Procedure group.
    Step: 9B
    Define Transportation Connection Point
    Path: Under the Same Menu path--- Define Transportation Connection Point.
    Step: 9C
    Define Routes and Stages.
    Path: Under the Same Menu path--- Define Routes and Stages.
    Select the New Entries and Enter the Details
    Then Select the Routes stages and define
    Step: 9D
    Maintain Stages for all Routes.
    Path: Under the Same Menu path---Maintain Stages for all Routes.
    Step: 10
    ROUTE DETERMINATION
    Define Transportation Zone
    Path: Sprou2014Logistics Executionu2014Transportationu2014Basic Transportation Function---Routesu2014Route Determinationu2014Define Transportation Zone.
    Step: 10A
    Maintain County and Transportation Zone for Shipping Point.
    Path: Under the Same Menu path--- Maintain County and Transportation Zone for Shipping Point.
    Select the Shipping point and enter the Country and Transportation Zone
    Step: 10B
    Define Transportation Groups.
    Path: Under the Same Menu path---Define Transportation Groups
    step: 10D
    Maintain Route Determination
    Path: Under the Same Menu path--Maintain Route Determination.
    Select New Entries and Define the Route Determination.
    SHIPMENTS
    Path: Sprou2014Logistics Executionu2014Transportationu2014Basic Transportation Functionu2014Shipments
    Step: 11
    Define Shipment Types
    Path: Sprou2014Logistics Executionu2014Transportationu2014Basic Transportation Functionu2014Shipmentsu2014Define Shipment Types.
    Select the New Entries and define Shipment Type
    Step: 12
    go to Customer master data.
    In Address of General data. Enter the Transportation Zone id. And save
    U will get the route.
    Process 2
    1) Maintain transportation planning point through Menu as follows:
    Enterpriseà Definition à Logistic Execution àIMG Maintain  transportation planning point.àStructure
    Create your own like BP01 enter the general data¡¯s required
    2) Defining modes of transport:
    Logisticà Transportation àBasic Transportation Functions àIMG Routesà àDefine routesàExecution Define modes of transport
    Use the standard like:
    Shipping type: 01
    Description: Road
    3) Define shipping types :
    IMG DefineàLogistic Executionà Transportation àBasic Transportation Functionsà Route àshipping types
    Or through T-code: SM30
    PT: 01
    Description: Truck
    Mdtr: 01
    STPG: 0001
    4) Define transportation connecting point :
    BasicàRoutes àIMG DefineàLogistic Execution Define transportationà Transportation àTransportation Functions  routesàconnection points
    Copy the std point and make it FB01 as departure zone and FB02 as destination zone
    5) Define routes and stages.
    Logià BasicàRoutes à Define routes àIMG Defineàstic Execution  Transportation routes and stagesàTransportation Functions
    Use the standard route and copy it as FB0001 and enter the departure zone and destination as what we created.
    6) Defining Transportation Zone:
    àIMG Define transportationàLogistic Execution à Transportation àBasic Transportation Functions zonesà Route àRouter determination
    Use the standard transportation zone depending on the route so as for the example use 0000000003 - Southern Region
    7) Maintain country or transportation zone for shipping points
    à Route determination àIMG à Logistic Execution à Transportation Maintain country andà Basic Transportation Functions àRoute  transportation zone for shipping point
    Shipping point be ASH1 and route as 0000000003 which is assigned to country India
    8) Maintain route determination:
    Basicà Route àIMG Route determinationàLogistic Execution  Maintain routeà Transportation àTransportation Functions  àdetermination
    Country of departure: India
    Departure Zone: 0000000003
    Country of destination: India
    Destination Zone: 0000000003
    And enter the datau2019s needed like shipping condition 01, etc.
    Maintain Transportation relevance for shipping point, sales document type and delivery types.
    9) Now create shipping types
    IMG Defineà Logistic Execution typesà Transportation à Shipments àshipment
    Copy the standard 0001 and make it to AFIL
    10) Define and assign traffic zones through T-Code: T_76 (or) thru menu as follows
    BasicàIMG Defineà Logistic Execution and assignà Transportation à Shipments cost àfunctions  tariff zones
    Copy the standard and make it to FABTARIFF and assign our transportation planning point as ATP1, ATP2 assign tariff zone to every particular transportation planning point
    11) Define and assign pricing procedures
    IMG define andà Logistic Execution à Transportation àShipments cost proceduresà Pricing à Price control àassign pricing
    Copy the standard shipping cost pricing procedure SDFC00 to FBSC01
    12) Assign purchasing data:
    àIMG Assign purchasing dataà Logistic Execution à Transportationà Shipments cost àSettlement 
    13) Assign transportation planning point to shipping condition, purchase organization, purchasing group and to plants.
    14) Define Automatic G/L account determination:
    à àIMG Automatic G/L Account Determinationà Logistics Execution àTransportation  Shipment CostsàSettlement 
    Or through T-code: OMWB
    Use G/L account 614000 as used in standard
    15) Automatic determination of CO assignments:
    Transportationà Shipment Costs à Settlement àIMG Automaticà Logistics Execution Determination of CO Assignmentsà Or T-code: OKB9
    16) Maintain shipping point address.
    à Logistics Execution à Enterprise Structure Define, copy, delete, check shippingàDefinition  point
    17) Creating G/L account centrally.
    Financial à General Ledger à Master Records àAccounting àAccounting Individualà Processing Centrally
    Or through T-Code: FS00
    18) Enter the G/L account 614000 to the company code AFIL
    19) Create transportation condition records:
    Master dataà Transportation à Shipment cost à PricesàLogistic Execution createà Or thru T-code: TK11
    Enter condition type FB00 that is freight condition type, which is used as standard in the shipping cost pricing procedure.
    Enter the price and save it
    Process:
    1. The system determines the pricing procedure for the shipment cost item-using transportation planning point, service agent and shipment cost item category
    2. Calculation Basis
    3. Condition Record
    4. Access sequence.
    For the sales order, create a delivery using VL01N and pick the goods. Now create a shipment using VT01N and assign the delivery to the shipment document. Make sure to enter the carrier and other details before performing the transportation planning and execution. Save the shipment document and PGI for the delivery would be done automatically.
    A shipment represents a physical goods movement between two or more locations.
    For the system to create a shipment, shipping-relevant deliveries must exist.
    You use Transportation Planning to group pending deliveries into shipments and then to perform the shipments.
    The outbound delivery documents contain routes that the system calculates in route determination, and a transportation planning date for the delivery.
    Dynamic transportation planning is responsible for grouping together outbound deliveries into shipments that have at least the same route, visit plan type and the same transportation planning date.
    The following restrictions can be taken into account for a shipment in Dynamic Transportation Planning:
    u2022 Weight
    u2022 Volume
    u2022 Variable capacity
    u2022 Number of stops
    u2022 Maximum duration
    u2022 Loading units
    Create Shipment Document
    Use
    After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
    Single documentà Create àTransportation Planningà Transportationà Logistic Execution ®Logistics
    T.code: VT01n
    Enter your transportation planning point and shipment type. Press enter.
    Creating the shipment cost document
    Use
    After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
    Single documentà Createà Shipment cost à Transportationà Logistic Execution ®Logistics
    T.code: VI01.
    After creation of shipment cost doc. You settle the Shipment cost.
    Go to VI02, enter shipment cost no.and press enter.
    Then go to Overview -- Fright cost items, Select the line item and double click it.
    Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
    On the Standard change, details u2013 Freight cost items screen, then check the check box u201CTransferu201D, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the u201CTransferu201D check box.
    Press save button on the current screen.
    Shipment cost settlement and documents:
    Use
    After the shipment cost settled in shipment cost document, it has the following affects:
    It creates a service entry sheet that refers to the purchase order determined.
    It posts acceptance of services performed.
    It creates an accounting document for the accruals.
    Further subsequent documents are created in FI.
    Create Delivery:
    T.code: Vl01n
    Create TO:
    T.code: LT03
    Create Shipment Document
    Use
    After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
    Single documentà Create à Transportation Planning à Transportationà Logistic Execution ®Logistics
    T.code: VT01n
    Enter your transportation planning point and shipment type. Press enter.
    Creating the shipment cost document
    Use
    After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
    Single documentà Createà Shipment cost à Transportationà Logistic Execution ®Logistics
    T.code: VI01.
    After creation of shipment cost doc. You settle the Shipment cost.
    Go to VI02, enter shipment cost no.and press enter.
    Then go to Overview -- Fright cost items, Select the line item and double click it.
    Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
    On the Standard change, details u2013 Freight cost items screen, then check the check box u201CTransferu201D, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the u201CTransferu201D check box.
    Press save button on the current screen.
    Shipment cost settlement and documents:
    Use
    After the shipment cost settled in shipment cost document, it has the following affects:
    It creates a service entry sheet that refers to the purchase order determined.
    It posts acceptance of services performed.
    It creates an accounting document for the accruals.
    Further subsequent documents are created in FI.
    Generally process is-
    1) VL01N
    2) VT01
    3) VL02N - PGI
    4) VI01
    5) ML81N u2013 Service Entry Sheet
    6) MIRO u2013 Invoice Verification
    Shipping docs (VT01) are created before PGI...
    You cannot carry out transportation planning or creation of shipment after the goods issue has been executed. Once goods issue is done it means that the material has left your premises so there is no need for a transportation planning after it.
    In case you need carry out the shipment documents at the end of the day you could just create the delivery documents during the day and at end of the day create the shipment documents and the goods issue.
    Amit

  • Multiple shipment agaisnt single delivery

    Hi Gurus,
    Can we have multiple shipment documents against a single delivery. If yes what are the instances where we can have this scenario. i.e. what we need to do in the config and also which process business need to follow to satishfy this scenario.
    Thanks.
    Laxmi.

    Hi Laxmikanta,
    Yes we can do multiple shipment for single delivery please follow the below steps.
    1) Once you create a delivery go to t-code VT01N
    2) Create the first shipment as you generally do.
    3) If you want to create another shipment then you need to change the shipment type and create subsquent shipment.
    4) You can create as many subsequent shipment as you want.
    5) For this you need to remove the check mark from the delivery status " Do not select deleveries already in subsequent legs"
    Once done you will be able to create as many shipments as possible.
    Hope this helps.
    Thanks and Regards
    Rohit.

  • Temporary invoice on sales order containing items with & without delivery

    Hi,
    I have a sales order which contains both items due to be billed on delivery and due to be billed without delivery.
    Could you please let me know how to create a temporary invoice on the basis of the order. The true/final invoice will work on the basis of the goods issue for the items on delivery and on the order for the other items.
    Thanks,

    Order & Delivery Related Billing depends on Item Category.First check these settings in VOV7.Now check the Copy Control settings in VTLA for Item Category relevant for Delivery Related Billing (F2).
    Now check in VTFA for Item Category relevant for Order Related Billing (F5).
    As per my understanding , you need the Final Invoice with both Line Items which could not be possible as Billing relevance is different for these two Items.
    Best Regards,
    Ankur

  • Stock Transport Order Without Delivery

    I m trying to transfer stock from one plant to another (within same company) without delivery.
    what all configuration do i need to do.
    pls. guide.
    I m little bit confused over stock transfer,
    Regards,
    Pramod Kumar

    Oh no, not at all!  This forum is meant to answer all your problems!
    Configure Inter company Stock Transport Order
    Material should exist in both the plants (Delivering & Ordering),
    Internal customer should be assigned to the ordering plant ( MM -> Purchasing ->
    Purchase Order -> Setup stock transport order -> assign the internal customer to the
    ordering plant and assign the Sales area of the internal customer.
    Assign its Sales area to the delivering plant
    Assign the document type and Delivery type NB and NLCC
    Assign the Supplying plant --> Receiving Plant --> NB
    Take the delivering plant and assign the sales area.
    Vendor master has to be created and assign the supply source (Delivering Plant).
    Create a purchase order ME21N ---> Save
    Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order
    number here and execute.
    Select the Delivery creation line and do the back ground process.
    Start the log display and see the delivery document number by the documents button
    Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery
    document.
    Billing (Intercompany pricing conditions should be set).
    AND
    1. Customer No. for the Goods Receiving Plant - OMGN
    2. Availability Check- Checking Rule (if necessary) - OMGN
    3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders,
    NLCC)
    4. PO type (which i believe you have done) - OMGN
    5. Assign Vendor No. to the Supplying Plant (done) - VK02
    6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you
    need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
    IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
    ***and by the way for the Invoice to work between Cross-Company Plants, you need
    also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure
    STO:
    STO CONFIG:
    The following steps have to be followed in order to configure stock transport order
    between two plants.
    1. Create a vendor for the Company code of the receiving plant using account group 0007
    via T-Code XK01.
    2. In the purchasing data view assign the supplying plant and the schema group
    3. Create customer with the sales area of the vendor.
    4. The shipping conditions, the delivering plant and the transportation zone determine the
    route in the STO.
    5. In the pricing procedure determination relevant to the STO assign document pricing
    procedure and customer pricing procedure to get the pricing in the invoice.
    6. Maintain condition records for pricing condition.
    7. Maintain carrier as a partner in the customer master.
    8. In OMGN select the supplying plant and assign the company code and sales area.
    Similarly select the receiving plant and assign the company code and sales area (The
    company code to which the plant is assigned to).
    9. Assign the delivery type and checking rule to the document type.
    10. And finally, assign the purchasing document type to the supplying plant and the
    receiving plant.
    11. Create the STO using T-Code ME 21N and save.
    12. Check for release strategy if any and release using T-Code ME 28.
    13. Create delivery in background using VL10G.
    14. If delivery is created, it is an indication of correct configuration and master data
    creation.
    Stock transfer between two plants in deffernet company codes is known as inter company
    stock transfer.
    Material shoud be maintained in both supplying and receiving plant MM01
    Sotck should maintain only in supplying plant MB1C
    Create receving plant as a customer in suplying plants company code and sales area
    XD01
    Assign this customer number in receving plant detials OMGN
    Assign supplying sales area in supplying plant details OMGN
    Assign delivery tupe NB for in combination of supplying/ receving plants.
    Create STO ME21N
    As it is normal there in the item details wer should get shipping date i.e customer number
    Go for Deliveryy VL10B
    Shipping point *****
    Select PO go for execute
    then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
    Goods Issue VL02
    Delvy doc **********
    Click on picking
    enter the picking qty
    Click on PGI
    in the mean time check in the PO history you will get the details
    Goods receipt MIGO
    Stock overview the stock will be updated....

  • The best forwarding agent determination during shipment processing.

    Hello,
    Standard SAP allow freight cost estimate during shipment processing for particular forwarding agent - "Freight cost estimate" button.
    Is it possible in standard to automatic determination of the cheaper forwarding agent based on freight cost estimation?
    Andrzej

    Dear Andrzej,
    Through "Freight cost estimate" you can find out which farwarding agent is cheaper than other  based on that you can deside  which FA is feasable.
    I don't think system will determine automatically the cheapest FA in the shipping documents.
    I hope this will help you,
    Regards,
    Murali.

  • Process 2 delivery order document become 2 billing document in 1 one time

    HI,
    is it possible to process 2 delivery order document become 2 billing document in 1 one time (just like collective billing document but the billing document will be create as many as delivery order document ?
    Thanks & Regards,
    Saiful arif

    Dear Arif,
    Please try with this option
    Go to VF04 transaction enter the selection data (To execute the delivery documents) then execute now system will execute the list of delivery documents which were not billed.You select dleveries those you want to bill then click on Individual billing document push button now system will create the invoices for the delivery documents,
    I hope this will help you,
    Regards,
    Murali.

  • Synch of invoice based on delivery (without Delivery doc)

    I've created in SBO Invoice based on Order (without Delivery document). Such Invoice act like delivery document and make stock postings. Why my order after synchronization doesn't change status to <i>send</i>? I've checked SHIPMENT table and there is no such document like my invoice.

    Hello John,
    I think the most simple way is to create a delivery first in SBO. After you have created all your deliveries you can use the Document Genaration Wizard to create all your invoices. After that you can use the option Document Printing to print all the invoices.
    This way you only have to enter all the information once and the information (delivery) will be synchronized with Webtools.
    Tim

  • Regarding shipment process

    Dear Gurus,
    In shipment process, we assign deliveries to shipments. One shipment means one truck in my company.
    My question is;
    If that truck is on way, in that case user can not use that truck again until it is released.
    So how can I implement it in SAP? Is there any standard way for it?
    Kind Regards,

    In standard, it is not possible.  You have to go for zee table where you need to have field to check whether the vehicle is released or not.  Based on this, while creating shipment, system should validate this zee table.  Of course, you can have additional fields like Truck Number, Truck type etc., depending upon the requirement.
    G. Lakshmipathi

Maybe you are looking for