Shippable but nonbillable and non inventory relevant  ?

Hi,
I need to configure an item category that allows shipping - but is non billable and does NOT create demand (non inventory relevant
What makes an item category not create demand?
Any / all ideas are welcome

Hi,
For making an Item category as "Non Billable", you need to make the field "Billing Relevance" blank in T.code VOV7. For ex: Say you are using Itm Cat ZTAN. Go to VOV7 and in field "Billing Relevance" make it blank. Make sure that this item category is used only for non billable items in a sales order.
To have a non stock material create a material of material type "NLAG" . This will resolve all your issues.
Let me know in-case you have any issues with this.
Regards,
Rohan Gudavalli

Similar Messages

  • How to identify Inventory and non inventory items

    Dear all,
    what are the ways to differentiate inventoried and non inventoried items.
    please advise. thanks.
    Thanks and regards
    Udaya

    he means the purchase order item category which can be seen in transaction ME23N.
    You never made clear if you want differentiate in SAP or the physical stock in the warehouse.
    As already explained by another one, in SAP you can procure one material number either to stock or to be expensed immediatly while receiving.
    However, physically you dont see any difference, you have to take organizational measures to not store expensed material together with material procured to stock.
    Even further, you should try to receive items which are not procured to be stored, at a different physical receiving place.
    In MIGO transaction at item detail in tab WHERE you will see a storage location if the material is to be stored in your warehouse, but you will not see a location if the material is procured directly to a project or cost center. then you see a receipient instead .

  • Inventory and non Inventory

    Difference between inventory purchase and non Inventory purchase and where are you posting

    Dear
    Inventory PO
    The purchase made for inventory i.e., to keep it in stock.
    These are account assignement in the PO is blank or "Q" if valuated for project or "E" for slaes order.
    Non-Inventory PO
    The purchase made for consumption i.e., on making Goods receipt for this PO the material will get consumed for cost center or order.
    The account assignment in PO will be "K" or "F".
    Regards
    Soundar

  • Purchasing - A/P Transaction Processing for Services and Non Inventory Item

    On of the main areas of concern that businesses have is in the area of Purchasing, Goods Receipts and AP Invoices Processing - There is a requirement that businesses have widely referred to as 3-way matching.
    While SAP Business One has this functionality covered quiet well via the following, there is still some need for enhancements so that the application can correctly reflect the AP Accruals:
    - Purchase Order processing with Approval Process (if configured)
    - Ability to perform Goods Receipts for Services.
    - Matching of AP Invoices to Goods Receipts with AP Invoice Approval Process (if configured)
    The above transactions serve the 3-way matching quiet well for all purchases however when it comes to accuring for Services that have been provided, the application does not do this. The Goods Receipt transaction processing to acknowledge the service delivery is allowed however the related posting to the allocation account is missing.
    The process that is followed by the application is same for Items that have not Inventory Items in Item Master.
    As a result of the above, the business have to manually work out what the Accurals for services provided but not invoiced should be.
    With little enhancement to the product this shortfall could very easily be overcome.

    Hi,
    Once there are transactions, we cannot make existing Inventory type item to Non Inventory type item.
    Check SAP note:937297 which states as follows :
    Symptom
    Changing the status of the Inventory Item checkbox (in Item Master Data) for items with inventory transactions and documents, might lead to inaccuracies in the calculations of inventory value.
    Other terms
    Inventory Item, Non-inventory Item, Item Master Data, Continuous Stock, Perpetual Inventory, Inventory Valuation, 2004, 2005, 2005 A SP01
    Reason and Prerequisites
    Consulting Note
    Solution
    The status of an item (Inventory Item/Non-Inventory item as selected in the Inventory Item checkbox in the Item Master Data window), cannot be changed once an A/P, A/R, or Inventory document is posted for the item.
    Regards,
    Jitin Chawla

  • What's relation among prod client,login client and non-livecache-relevant?

    Experts:
    I have some questions about abve concepts:
    Can a production client be non-livecache-relevant?
    Can some clients that are livecache-relevant but not production client?
    How many production client are allowed for SCM (only one like other SAP products?)?
    Thanks!

    Hi,
    1) how to decide which clients should be livecache relevant?
    Ans: All the clients should have LiveCache. Because the data will be fetched from livecache, the database and livecace will be having data sincronized.
    2) how to decide which one should production client?
    Ans: If you are asking about the number of client then it can be any. If you are asking relevant to other testing and QA then the production server will be different from the other and wich connected to OLTP system and having all the relevant business data.
    3) how do I know a client is livecache-relevant Or not? Which place to verify?
    Ans: as said above all the clients are livecache relevant only. You can check in the Transaction code LC10
    We have a SCM PROD system with only one working client :001. We should never make it non-livecache-relevant, right?
    Ans: Yes. If livecahe is not installed then SCM system will not work. The data fetch from livecache only.
    When you save any data it stores in Livecache and Database.
    Regards,
    Kishore Reddy.

  • Picking non inventory items for delivery

    hello
    Can anyone help us with the following issue :
    - in our deliveries we have both inventory items and non inventory items (freight lines, software). Non inventory items have to appear in the same delivery document as the inventory items
    - we cannot create those non-inventory items in inventory as they cannot appear in any stocktake
    - the picklist doesn't accept to release non-inventory items for picking
    Any idea ?
    Fabrice

    Hi Fabrice,
    Just an idea. Will it work if you create the non-inventory items in your item master data as just a sales and purchasing item, but not an inventory item? That way you can include it along with your inventory items without having any impact in your stocks. One issue is that the non-inventory item will not be shown in your pick and pack, but you can print a copy of your sales order as a pick list.
    Gavin

  • Non Stock relevant variance in COPA

    Hello Gurus,
    In the std. Cost estimation we have both STOCK RELEVANT and NON STOCK RELEVANT cost components. The STOCK RELEVANT are connected to VPRS condition type and NON STOCK RELEVANT are having some custom defined condition types.
    We linked the STOCK RELEVANT cost components to Value fields and NON STOCK RELEVANT SD condition types to VF. Is this correct?
    At the time of billing, we get the values to both stock and non stock relevant value fields.
    The stock relevant Variances are taken care by ML and my doubt is how to calculate the NON stock Relevant variance and take it to COPA?
    Please advise.
    Thanks
    PM

    Hi Praveen
    I dont think you did the right thing... If the Non Stock relevant cost components were also calculated from CK11N, then what you did is not right
    You should have simply mapped the Cost Comp Str for all the Cost Comp (STock relevant as well as Non Stock rel) to VF in KE4R...
    At period end, you would execute CKMLCP, which would again calculate all the Cost Componnets.... You just need to execute KE27 to revaluate COGS in COPA...
    I dont know why you used SD condion types to post the non stock relevant portions into COPA
    BR,Ajay M

  • I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everythi

    I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everything. I have authorized this new computer so I don't know what the problem is. I can't get on my old computer with my itunes account because the computer is broken. Not sure what to do

    "I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
    Correct.  it does not magially appear in other places.  It will only be where you put it.
    "I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everything. "
    Correct as well.  Iphone will sync with one computer at a time.  Syncing to another will erase the current content.
    You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

  • I got a new windows computer and I can't transfer all of my music to it from my old computer. I have some music on my phone but not all of it so when I plug it in only some of my music shows up and none of my playlists.

    I got a new Lenovo Windows computer and I'm trying to transfer my iTunes library to my new computer. I can't figure out how. I tried plugging in my iPhone and it synched what music was on my phone but I don't have my entire library on my phone and none of my playlists transferred. I tried authorizing my computer and it is but it still isn't showing up. I turned on my homesharing on my new and old computer but apparently I have two other computers I have authorized and I don't know which ones they are, probably ones that have been thrown out. What do I do now?

    iDevices are not and have never been backup devices.
    Authorizing a computer does not cause media to magically appear.
    Media is only where the user puts it.
    Copy the ENTIRE iTunes folder from the old computer to the new computer.

  • Inventory Management Serialize and Non Serialize BI Query

    Dear All,
    Is there any possibility to achieve a Inventory Management report based on Serialized and Non serialize materials.
    The requirement is to develop a report on  serialized materials for which WM is activated  and For serialized materials for which WM is NOT activated.
    Kindly let me know how to achieve this BI Query?
    Thank you
    Regards.

    Hi,
    Check these threads.
    Negative Val Stock
    Inventory Report with negative stock
    Regards.

  • I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

    I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

    Authorize the computer in iTunes -- Store>Authorizie this computer.  Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
    Transfer purchases.
    http://support.apple.com/kb/HT1848

  • Inventory Buckets as Slow Moving and Non Moving

    Hi Experts.
    I have an Requirement for Buckets in Inventory as Slow moving and Non Moving
    Considering:
    1)  For 0 to 30 days 0ISSVS_VAL and 0RECVS_VAL as no movement and 30 to 60 days there is movement then consider Slow Moving.
    2) For 0 to 90 days 0ISSVS_VAL and 0RECVS_VAL as no movement then consider Non Moving.
    Considering:
    Here I am taking 0VALSTCKVAL  instead of  0ISSVS_VAL and 0RECVS_VAL because as it inflow and outflow.
    So how can I create Buckets for above Requirement.
    Waiting for reply
    Thanks
    Sunil

    Hi,
    For creating Buckets first need to Have Date Fields logiv 0 to 30 days based on what char's we  need to consider like :
    User entered date - Created date = Difference (0 -30).
    Systems Date (Today's Date) - Created Date .
    or do you have any calculated field in modelling which contains this data.
    kfg might be any either 0VALSTCKVAL  instead of  0ISSVS_VAL and 0RECVS_VAL .
    Just need to create New selction/RKF based on those date Difference and restricting with existing 0ISSVS_VAL and 0RECVS_VAL.
    Thanks.

  • I have turned keychain 'on' on both my ipad and iphone 5. The instructions that I have read just say follow the on screen instructions, but there are none. What am I doing wrong?

    I have turned my keychain 'on' on both my i phone 5 and my ipad. the instructions online say I should just follow the on screen instructions to set this up, but there are none. What I am doing wrong?

    Apps downloaded on one should also appear on the other as long as the app in question runs on both iPads and iPhones.

  • Non inventory Item used in BOM/production, but i need used qty used

    Hi
    What type of item do i use best or how can i achieve this:
    I have a license cost that is used in BOM's and therefore in production orders as well. Its cost is added to the product this way. At the end of a period, i need to know how many of the item has been used in a production. If i have set the item up as non-inventory, i don't get any statistics for the item.
    Howe do i have to set up the item to get my information.
    Thank
    Franz

    Hi Franz,
    Set up this item as non inventory item should be fine since you don't need to count the item on hand.  To get its qty for production, you could use query to get report.
    Thanks,
    Gordon

  • Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Hey Ian
    That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Thank you for using the Apple Support Community.
    -Norm G.

Maybe you are looking for