Shipped drivers and DIH

We want to test DIH in Solr connecting to a MS SQL Server.
First we followed the steps described in the Help section "Indexing using Data import Handler" (http://help.adobe.com/en_US/ColdFusion/10.0/Developing/WSe61e35da8d318518-1acb57941353e8b4 f85-7ffd.html).
For connecting to MS SQL we would definitely prefer to use those drivers shipped with CF. As far as we could find our, for MS SQL this is the Macromedia Driver, so we switched the settings in data-config.xml to:
driver="macromedia.jdbc.MacromediaDriver" url="jdbc:macromedia:sqlserver://foo:1433;databaseName=bar"
We also added a lib/-subfolder into the folder of the corresponding collection where we did put the macromedia_drivers.jar so Solr could find the driver.
However, executing a fullimport fails.
SCHWERWIEGEND: Exception while processing: Mandator document : SolrInputDocument[{}]:org.apache.solr.handler.dataimport.DataImportHandlerException: Unable to execute query: select * from Mandators Processing Document # 1
    at org.apache.solr.handler.dataimport.DataImportHandlerException.wrapAndThrow(DataImportHand lerException.java:72)
    at org.apache.solr.handler.dataimport.JdbcDataSource$ResultSetIterator.<init>(JdbcDataSource .java:253)
    at org.apache.solr.handler.dataimport.JdbcDataSource.getData(JdbcDataSource.java:210)
    at org.apache.solr.handler.dataimport.JdbcDataSource.getData(JdbcDataSource.java:39)
    at org.apache.solr.handler.dataimport.SqlEntityProcessor.initQuery(SqlEntityProcessor.java:5 9)
    at org.apache.solr.handler.dataimport.SqlEntityProcessor.nextRow(SqlEntityProcessor.java:73)
    at org.apache.solr.handler.dataimport.EntityProcessorWrapper.nextRow(EntityProcessorWrapper. java:238)
    at org.apache.solr.handler.dataimport.DocBuilder.buildDocument(DocBuilder.java:596)
    at org.apache.solr.handler.dataimport.DocBuilder.doFullDump(DocBuilder.java:268)
    at org.apache.solr.handler.dataimport.DocBuilder.execute(DocBuilder.java:187)
    at org.apache.solr.handler.dataimport.DataImporter.doFullImport(DataImporter.java:359)
    at org.apache.solr.handler.dataimport.DataImporter.runCmd(DataImporter.java:427)
    at org.apache.solr.handler.dataimport.DataImporter$1.run(DataImporter.java:408)
Caused by: macromedia.jdbc.MacromediaDriver$InvalidLicenseException: Der Gebrauch der Macromedia JDBC-Treiber ist eingeschrдnkt. Die Treiber dьrfen nur mit Macromedia-Serverprodukten verwendet werden. Prьfen Sie bitte, ob Ihre Lizenz die erforderlichen Treiber unterstьtzt.
    at macromedia.jdbc.MacromediaDriver.unlock(Unknown Source)
    at macromedia.jdbc.MacromediaDriver.connect(Unknown Source)
    at org.apache.solr.handler.dataimport.JdbcDataSource$1.call(JdbcDataSource.java:161)
    at org.apache.solr.handler.dataimport.JdbcDataSource$1.call(JdbcDataSource.java:128)
    at org.apache.solr.handler.dataimport.JdbcDataSource.getConnection(JdbcDataSource.java:363)
    at org.apache.solr.handler.dataimport.JdbcDataSource.access$200(JdbcDataSource.java:39)
    at org.apache.solr.handler.dataimport.JdbcDataSource$ResultSetIterator.<init>(JdbcDataSource .java:240)
    ... 11 more
Which indicates insufficient license priveliges.
We are running ColdFusion 10,282462 Developer Edition on Windows 7. We can successfully connect to the same database within our CF-apps and thus would have expected new DIH-actions of cfindex should be able to connect to the same databases with the same shipped drivers, too.
Anyone any thoughts how to fix this issue?

Hm, where was dynabook released? In USA or GB??
So, here are some links to toshiba driver sites, which could probably help you to find the drivers you need:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
http://209.167.114.38/support/Download/ln_byModel.asp
Good luck with searching drivers for your machine.
Greetz

Similar Messages

When will WIndows 8 64-bit drivers and apps be available for download

It's a bit frustrating that I can't get Windows 8 drivers and applications for my Satellite P775 because of a buggy Windows 8 Update Assistant: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68918&tstart=0
I'm happy to download and install the relevant components manually. Do you plan to make these available for download and if so when? The web site did indicate that they would be available in time for the Windows 8 release - which is today.

Hi JoeJoe as far as I know all notebooks which were shipped with the Win 7 and are part of the Win 8 Upgrade Assistant will get the Win 8 drivers via this Upgrade Assistant. All newer notebooks series which are already shipped with the Win 8 will be able to download the drivers manually
Furthermore other it seems that Win 8 drivers will be released in three different steps
Step 1 - Toshiba Upgrade Assistant Release: 26.10.2012
Step 2 - Toshiba Upgrade Assistant Release: 21.11.2012
Step 3 - Toshiba Upgrade Assistant Release: 07.12.2012
http://aps2.toshiba-tro.de/kb0/TSB2A03EU0000R01.htm

ScanJet 8270 ISIS/TWAIN Drivers and Utilities cannot be installed on Windows 8.1 64Bit

Hello, I've tried to install all the drivers for my ScanJet 8270 on a Windows 8.1 64Bit System. The standard twain and wia drivers installation worked perfect, but when trying to install the "ISIS/TWAIN Drivers and Utilities" the setup hangs (I'm using version 3.0 from 20 Aug 2014 which is currently the latest one). The setup starts, shows a progess bar while extracting the files, but after that nothing happens. After a while I've took a look into Windows task manager and saw, that the process is still running, but doing nothing (no CPU or other resource usage). On Windows 7 everything worked fine, but not on Windows 8. Although the scanner is advertised to work under Windows 8 and this driver is also listed on the driver downlaod page for Windows 8 it's not possible to get it installed on Windows 8. Is HP not testing the setups before shipping them? What can I do to get this driver to run on my PC? Is anyone out there having the same problems and solved them already? Thanks for your advices Sven

Hello, Thank you for posting your query This looks like there is no action from the software setup after a while on Windows-8. Please try the following steps 1. Open the run prompt in your computer and type "msconfig"2. In the system configuration utility, select the "services" tab3. Check the option " Hide all microsoft services"4. All the Programs, other than Microsoft Windows services would be listed now5. Locate any conflicting programs and uncheck them in the window6. Restart the computer and try to run the installation again Please Note: keep a record of the programs you are unchecking as after the installation you may need to check them back in the same screen Do not uncheck any Microsoft service from the list as it may be critical for your computer's function. If doubtful. Please contact us through chat or phone for further assistance. To contact us through chat: http://www8.hp.com/us/en/contact-hp/chat.html Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted SolutionI work for HP .

Epson Stylus Pro 7700 will not work after installing Mountain Lion, I have update all drivers and firmware

This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?

Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website?

Report: Create report for invoice details, shipping details and partner fn.

hi,
i want to know the table used for Invoice Details, Shipping Details and Partner Function in SD.
thanks in advance.

Hi Chandrasekar,
Welcome to SDN.
Please check this link for SD tables.
http://www.sapgenie.com/abap/tables_sd.htm
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

My solution for No Audio -- Conexant drivers and Windows 7 x64

My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/ About half way down you will find the sub-directory with these files. Just right click each one and save to your desktop.
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C;/swsetup/ This is the directory where HP updates default to.
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file. It did not work the first time -- I missed a line in my cva file. However, I then manually installed the Conexant drivers as follows and voila I had sound, nice crisp clear sound.
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then" Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then Conexant, then "Have Disk" . Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
This question was solved.
View Solution.

I thought that I would recompile my answer and then mark this thread as solved since it was not a post about a problem but rather how I solved a very common problem that might be of benefit to others.
My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/sp35501-36000 About half way down you will find these files. Just right click each one and save to your desktop.(The 32 bit files are in a different subdirectory at ftp://ftp.hp.com/pub/softpaq/sp??????-??????)
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C:/swsetup/ (This is thedefault directory for HP updates.)
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file and voila I had sound, nice crisp clear sound.
The use of the cva file is to streamline the driver install and it is kind of cool if it works. If you cannot find it or you are not successful the first time or you do not want to bother with modding anything, do not worry, the manual install will work for sure.
Run sp35558.exe to extract everything and let it strike out. Then go to Device Manager and update the driver manually as follows:
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then "Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then "Conexant", then "Have Disk". Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
Hope this helps.

Difference between shipping invoice and fiscal invoice?

Helo.
Can anyone tell me the difference between Shipping Invoice and Fiscal Invoice?
Regards
Points are assured

Hi Kulkarni,
Invoice Processing
Process
You can use this business process to display and process invoices both in SAP Enterprise Buyer (SAP EBP) and SAP Supplier Self-Services (SAP SUS).
As supplier or service provider, all invoices that you enter or process in SAP Enterprise Buyer must be approved by a responsible internal employee. For goods and services with a low purchase value, invoices and credit memos can also be created without a purchase order reference. Moreover, it is also possible to create express invoices in the check status application.
In SAP Supplier Self-Services (SAP SUS) invoices can be entered with reference to a purchase order, shipping notification, or contact person before they are sent to the customer.
If, following a purchase order, the goods supplied or the service provided turn out to be defective or the price charged is too high, you as an internal employee, supplier, or service provider, can enter and process credit memos or subsequent debits/credits in SAP Enterprise Buyer
i think the invoice generated during a particular fiscal year is fiscal invoice.
thanks
sekjar

How do I update drivers and BIOS on Satellite P300?

I've been having problems with my wifi, and as my partners laptop is working fine, it was suggested that I might need to update drivers and/or BIOS.
I've tried to do this but where do you download the BIOS/driver updates to?
It just defaults into 'my documents', sits there and does nothing?
After downloading, How do I ensure my notepad 'takes' the updates?
As you can see, I'm not overly technical so any advice in simpletons terms please...
Thanks.

Hello
All drivers and tools for your notebook can be downloaded here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
At first I would try a WLAN driver update. If you have downloaded the WLAN driver, unzip all files and start the setup.exe file. This will automatically install the new driver and will be used now.

R9 270X Gaming 2G, unable to use the latest drivers and Mantle

I just bought a R9 270X Gaming 2G S/N 602-V303-13SB1312109829-398
When I first got the R9 270X, I installed the latest AMD drivers with the full package.
Later I got the, what I found to be, notorious atimkdag.sys BSOD.
I recovered my system partition with Acronis from before I installed the GPU. And installed the drivers found on MSI website which are considerably older than those on AMD’s website. I have not had an atimkdag.sys BSOD since. In fact I think I am using Windows stock drivers as the driver version says 13.251.9001.0, and I think the MSI driver is 13.101.0.0. Not sure how that happened.
Now my understanding is that this GPU should be Mantle enabled, however using Star Swarm Stress Test, which includes Mantle testing, said it found no Mantle enabled GPU. Perhaps because I am using an older driver.
I read somewhere that atimkdag.sys BSOD is linked to AMD Catalyst Control Center. Since I never used that last time I had an AMD GPU, I have disabled it on start-up.
What do you guys think would be the best option here? How can I both enjoy the latest drivers and avoid the notorious atimkdag.sys BSOD. Or do you think I should just stick with the drivers I have, without Mantle enabled. I haven’t actually got any Mantle enabled games at the moment, but are planning to get it though.
It may or may not be important. But I upgraded from Windows 7 to Win 8 Pro then Win 8.1 Pro. Perhaps it is leftover sys files. I noticed in forums that the atimkdag.sys BSOD mostly hit Win 7 systems. Perhaps the reason I am not getting the BSOD now is simply that I am not using AMD Catalyst Control Center, as you would think that if it is left over from Win 7 it should affect both old and latest drivers, right.
Thanks

Please disregard my previous post asking for help.
This is also a message to other noobs like myself, read the F.A.Q. before you post anything in the forum. I read the F.A.Q. about how to update drivers, how to remove old driver fragments and followed it to the letter.
https://forum-en.msi.com/faq/article/where-can-i-download-vga-drivers-and-how-do-i-install-t
Now Mantle works and as for the atikmdag.sys BSOD, hopefully I will not experience this now that I completely uninstalled all previous driver files, using Driver Sweeper in Safe Mode. I do not see why I should.
If against odds it happens, then I will come back and ask you guys for help.
Thanks

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Can no longer install drivers and touch screen not working anymore

I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!

Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Audigy 4 - Vista drivers and software urgently nee

you know... i have this sound card (Audigy 4 - non pro) for over one year now, AND i don`t have a good driver and software for windows vista home premium x64. last driver for this sound card is:
. Creative Sound Blaster Audigy series Vista Driver 2.2.0002 (38.30 MB) 6 Mar 07.
i mean... 6 mar. 07
how long do i have to wait for you, to relase all the software it is on windows xp oh, this audigy 4 was not intended to use with vista, wright and you want everybody to buy that x-fi sound card with another set of problems in windows vista. nice marketing solution. good for you ONLY.
i`m just tired waiting. my card doesn`t work as it should, nor as it worked in windows xp.
i need all that software. all of it, working under vista. PRONTO!
you will provide that software, or you just lost me as a customer, and along with me, alot more.
btw, daniel_k was only helping people, by providing drivers and software YOU couldn`t, or you just didn`t wanted to. stop deleting his posts or links to the drivers made by him.
just stop that abbusi've marketing strategy, by not releasing software for older sound cards, and forcing customers to buy your new products. no, that wouldn`t happend.

http://forums.creative.com/showthread.php?

Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work.
I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
The drivers that are not working on Windows 7 32 bit are:
Realteck RTL8188EE 802-11b/gn witeless lan
Realteck ethnet die and
Intel High definition graphcs driver
Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
This question was solved.
View Solution.

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Satellite A300-1N9 - Where can I download Windows 7 drivers and tools?

Welcome
At the outset I want to thank you for any help or steer me to an idea about the drivers for this model, for a moment I will describe what exactly it.
I bought this laptop with Vista I got him a CD with the system and on this record were already drivers and add-ons to your laptop or other cool things such as Toshiba drivers for camera, Bluetooth, Synaptics, dvd software, and a program or driver I do not know exactly what it is, but such a cool thing that allows you to set the lights on the whole panel, including a laptop with the word "Satellite". Everything fits nicely, but only with Vista that I got on the board from Toshiba.
Now, I went on Windows 7 As for the fundamental drivers that have them from the manufacturer Toshiba eg driver webcam or mouse. But the more I depend on these great things that I had under Vista, even though that panel backlighting laptop.
Does anyone have any idea on this that all additives in the CD that I got, where it is Vista, you can somehow extract these extras, or is a site where you can download it all, or a list of these additives to Win match 7
Thanks in advance again for any help.
Yours
wolfmark

Hi
First of all you can download all drivers and tools from the Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
For the illumination buttons and illuminated Satellite you have to install Toshiba Value Added Package. It activates also all functions on the FN keys.
As far as I know the illumination can also be turned on/off in BIOS. Check this!!!
The webcam driver is also listed on the Toshiba page and touchpad driver to enable virtual scrolling.
I hope I could help you a little bit! :)
Bye

Shipped drivers and DIH

Similar Messages

Maybe you are looking for