Shipping Date Change issue in SNC

Hi ,
Recently we upgraded from SNC5.1 to 7.0.Supplier enters the shipping date in PO worklist and system in turn calculates the Delivery date.This is working fine in Production also.
But after upgrade we found that when supplier enters the shipping date other than requested shipping date by customer then System is not saving the date and in turn when gets published customer requested shipping date is getting transmitted to ECC.
Chnage date is not working.
Thanks and Regards
Raghavendra Pai

Hi Raghavendra
I have the below settings
D/T Due Qty (ASN):Shipping Date/Time
D/T Due Qty (Conf):Shipping Date/Time
D/T for ASN in DL: Shipping Date/Time
Relevant PO SL:CONF
Also i have deactivated the validation check
PO_SHIP_AFTER_DELVRY_DATETIME
for profiles POC1,POC2 & POC3
I am able to enter the CDD date as desired, same is transferred to ERP
Regarding Due list query
When you create an advanced shipping notification (ASN) for a purchase order item in the due list for purchasing documents, the system fills the ASN with the data that is currently displayed in the due list for purchasing documents.
and this is requested data, i am not sure how to get confirmed data into due list query, you need to ask any webdynpro developer, like which FM and query it is referring and modify it suitable
You can create ASN for confirmation line in PO details, as it is allowing to store the delivery date now
Best Regards
Vinod

Similar Messages

Am I suppose to receive an e-mail when my ship date changes? I haven't heard ANYTHING.

I haven't received anything about my order. I have had to call to get all information about my ship date changing.

Yes, you were supposed to receive a confirmation email after you place your order with a 10 digit order # so you can check the status. Then after your status has been process (which could take days or weeks) you should received an email that your phone has been shipped with a tracking #. VZ should send out a notification if there is a delay with the order. If you have not received any type of email then i suggest to call VZ and find out changes were made that you don't know about. Hope that helps and good luck!

I ordered a back order iPhone 6 64gb on around 10/07. I was told I would get it in 2 weeks. Then the ship date changed to 11/3. It's 11/11 and I have yet to get any emails whether the phone will be shipped or not.

So I checked the order status again today and it still shows that it's being processed but the shipping date is still 11/3. A week later and it still hasn't been shipped. Is there someone who can help me so I have an idea when it will be shipped, if ever? I ordered a gold iPhone 6 64gb. I thought I was going to get it in 2 weeks but instead it's been over a month. Thanks.

Thanks for the additional information michiskippi! I have sent you a direct message so that I can access your account and follow up on this order personally. Please respond to my message at your convenience.
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Shipping date changed from 10/28 to unkown? Canceled order?

I ordered an iPhone 5s on 10/11. Since then, it has shown a ship date of 10/28, until last night. Now under the "expected ship date" it says "not available at this time". What in the world does that mean? Have these orders been pushed back, yet again? I ordered a 16gb space grey one and I thought those were shipping sooner than the gold ones. I am a brand new customer to Verizon wireless and I received an email last night saying my order was canceled. I called and they assured me that it is still in the system (once they finally found my order) and that it looked like somehow another order was "accidentally" placed by the system and that order was canceled. The weird thing is that the canceled order number is the same order number as the iPhone I ordered and not the Note 3's I ordered because I ordered them separately.
I've seen numerous posts about orders accidentally getting canceled. I don't understand how their system can be THIS bad. This isn't exactly appealing to someone who is a new customer of this company. I had no choice but to switch to Verizon from another company due to us moving and not having service anymore with our prior cell company. I'm a little frustrated.

While speaking to my "other" cell company getting my final bill in order, with the exception of that one line I am waiting to transfer, a rep there told me their grey and silver iPhones are shipping in 3-5 business days consistently. She even double checked when I was on the phone, for argument's sake, and confirmed it. I have ONE out of 3 lines left on my other provider due to the delayed shipping of the iPhone 5s. I am really trying to avoid having to pay another month's service there and have until November 2nd to port that last number over because my new billing cycle starts on the 3rd. If the shipping gets pushed back further, it's not going to be favorable for me and I'll end up paying 2 different companies for another month. I also can't just delete the other line or my daughter will be left at school without a phone and in this day and age, I'm not willing to do that.

Purchase order shipping data change exit in ME59N

Hi Experts,
While creating Purchase Order from purchase requisition I need to change the value in field unloading point in shipping tab of Purchase order item. I am coding in exit 'EXIT_SAPMM06E_013' and changing the value of XEKPV-ABLAD. Still the value is not updated in the Purchase Order. Please advise.

Hi,
You can update the delivery date , by an customer program in back ground.
This should be triggered for every PGI done with count in PO delivery date.
This delivery date should be changed before the shipment is triggered.
Ask your ABAPER to develop an custom program , based on input logic how to change the delivery date in PO.
He will develop the program as per your input given to him.
Rgds,

Outlook & iPhone 3GS: calendar date change issue.

I am using Outlook 2007 & iPhone 3GS - both fully updated.
When I set up a recurring full day event (such as a birthday) in Outlook and then sync with iPhone the dates get changed and moved by a day or two (ahead of time). This does not happen with regular appointments that are only set up for an hour or so. It seems to be only with full day events? The change is also made in Outlook - like the iPhoen takes precedence.
Can someone help please? This is a real pain in the ***.

can you confirm that the "software release" for your OS is 10.3.1.1565 ?
I did this to try :
create a calendar event on my Passport, set for sunday 8th, and save it, and close the calendar app
open the calendar app, go to that even and edit it.
I can click on the "All Day" line, right under the participants list, this opens a new page
In that page, I have:
at the top the date
followed by the 7 days of the week
right underneath a line with two dropdown menus : Event Starts / Event Ends
and then a line with the Timezone, and the toggle "All day" that is set to ON
and finally a dropdown menu for repetition.
I can tap on the "Event Starts" dropdown menu, and it opens and I can choose another date.
Do you confirm that this is what you are trying to do?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Shipping date changed to "unavailable"???

I started my order at 12:00 am pst- was told sept 19th arrival. Confirmation email says sept 19th delivery date. Checked online order status- it just switched to"unavailable" we ordered a grey 6 64 gb and a grey 6Plus 64 gb. When will my device ship? Is my confirmation email guarantee? It does not say "estimate", it says "deliver by 09/19/2014"- can someone from verizon please clarify?

Congrats on your new phone, kokomiller. Your email does confirm your accurate delivery date. So you are scheduled to receive your new phone on the 19th. Have a great week.
ChaunceyM_VZW
Follow us on twitter @VZWSupport

Deciphering Cron log to try to determin system date change issue

Solaris 9 box, Sparc Sun V1280.
We had two events the past day or so where the system time of a server changed 3 hours forward and then changed back 3 hours later that day. We manually corrected the time after the first shift was noticed around 4pm.
Each time the time shifts took place, there were no logged in users and no root users at all during the shift. So, the assumption is that a script with root access did it.
However, I have yet to find any scripts that would do that yet.
The one place that I can see when the time changed is in the cron log.
It is a bit confusing looking at the log because I'm not exactly sure what I am seeing.
You can see when a command takes place with the CMD: entry, but what follows is not clear if it actually belongs to that command or is possibly from an entry above that was still running... It doesn't help that several of the entries take place at the same times, typically 00, 15,30 and 45 minutes after the hour.
I've changed that now, but only have the logs of when it happened to investigate with.
Of course, all parties involved say that they changed nothing that would cause this :-)
Below is a number of entries surrounding the inital time shift where the servers time moved forward 3 hours...
. > CMD: /usr/lib/sa/sa1
. > sys 20943 c Tue Oct 27 11:00:00 2009
. > CMD: /app/oraprod/admin/dba/scripts/check_concurrent_mgr.sh
. > oraprod 20944 c Tue Oct 27 11:00:00 2009
. > CMD: /usr/local/system/TOSCO/system-monitoring/filesysck.sh > /dev/null 2>&1
. > root 20945 c Tue Oct 27 11:00:00 2009
. < root 20945 c Tue Oct 27 11:00:21 2009
. < oraprod 20942 c Tue Oct 27 11:00:00 2009 rc=1
. < prodmgr 20941 c Tue Oct 27 11:00:00 2009
. < sys 20943 c Tue Oct 27 11:00:00 2009
. < oraprod 20944 c Tue Oct 27 11:00:01 2009
. > CMD: /usr/lib/sa/sa1
. > sys 29747 c Tue Oct 27 11:15:00 2009
. > CMD: /app/oraprod/admin/dba/scripts/check_concurrent_mgr.sh
. > oraprod 29748 c Tue Oct 27 11:15:00 2009
. > CMD: /usr/local/system/TOSCO/system-monitoring/filesysck.sh > /dev/null 2>&1
. > root 29749 c Tue Oct 27 11:15:00 2009
. < sys 29747 c Tue Oct 27 11:15:01 2009
. < oraprod 29748 c Tue Oct 27 11:15:01 2009
. < root 29749 c Tue Oct 27 *11:15:14* 2009
Note the time shift after this point...
. > CMD: /app/oraprod/admin/dba/scripts/check_workflow_mailer.sh
. > oraprod 3809 c Tue Oct 27 *15:06:32* 2009
. < oraprod 3809 c Tue Oct 27 15:06:32 2009 rc=1
. > CMD: /usr/local/system/TOSCO/system-monitoring/filesysck.sh > /dev/null 2>&1
. > root 4491 c Tue Oct 27 15:15:00 2009
. > CMD: /usr/lib/sa/sa1
. > sys 4492 c Tue Oct 27 15:15:00 2009
So, I'm trying to see if it is possible to know which (if any) entries might be the cause of the time shift. The entries appear to be mixed between the commands (CMD: lines) making it hard to know which actually belongs to which command.
I have actually looked at every script or function listed and don't see anything in them to cause this however.
This is a Solaris 9 box, Sparc Sun V1280.
It has been basically static for years and has 2 related servers that have not been effected. There are also three 3 identical servers used in test that are also uneffected. Each has ntpd which keeps them in sync except of course when the one box leaps ahead 3 hours or back 3 hours.
The time shifts happened both on the same day, once around 11:15am and again about 5:15pm
Server was rebooted the next day and has not done this since.

krelvinaz wrote:
Solaris 9 box, Sparc Sun V1280.
We had two events the past day or so where the system time of a server changed 3 hours forward and then changed back 3 hours later that day. We manually corrected the time after the first shift was noticed around 4pm.I don't understand. Did the time shift back on it own after 3 hours, or did you correct the time after you noticed the shift.
>
Each time the time shifts took place, there were no logged in users and no root users at all during the shift. So, the assumption is that a script with root access did it. That is possible. It is also possible that this is a hardware error. The clock on the motherboard can fail in ways that drive the clock to different points in time. It also gives you a way to test.
If you can afford the trouble it would cause, can you change the time to just before the first shift and see if it shifts on its own?
>
However, I have yet to find any scripts that would do that yet.
The one place that I can see when the time changed is in the cron log.
It is a bit confusing looking at the log because I'm not exactly sure what I am seeing.
You can see when a command takes place with the CMD: entry, but what follows is not clear if it actually belongs to that command or is possibly from an entry above that was still running... It doesn't help that several of the entries take place at the same times, typically 00, 15,30 and 45 minutes after the hour.Each job launch starts with two lines (that are very difficult to display on this forum, even in tags)
{code}> CMD: /this/is/the/job{code}
{code}> <user> <PID> c <start time>{code}
There will be a matching line with a less-than sign and the same PID to mark when the job completes.
If it is the hardware clock, my experience tells me that this will get worse until the motherboard fails completely. Hopefully this is a script and you can find it.
If nothing else, you might consider writing a stupid job monitor. Just something in perl that will sleep 1 second, then check the time. If it notices a large jump in time, it can do a quick 'ps' and write down the time and what's running.
Darren
Edited by: Darren_Dunham on Oct 29, 2009 1:57 PM

IPhone 6 expected ship date 10/3 - no shipping info yet. When will phone ship?

I have checked the order status and it still stays in process. I want my phone!!

I am having the same issue. Both my boyfriend and I pre-ordered an iPhone 6 on 9/12 (the launch of the pre-order). He ordered on the phone about 2 hours before I ordered online. Both our expected ship dates were 10/7. I checked again a few days later and both our expected ship dates changed to 10/3. He received his shipment details on Thursday 9/25 and received his phone last Monday 9/29. My expected ship date is still 10/3 (today) and I have still received no shipment information. I'm really frustrated and would like my phone or at least information about the status of my phone.

Link between actual ship date of an item and schedule line in Sales Order

So, we are developing a custom report that compares actual Ship Date (Goods Issue Document MKPF-BUDAT) and the date the item should've been shipped (Schedule Line Date).
I am able to link the GI Document to Delivery Document and can then link to Sales Order Number/Item Number. However, a line item can have multiple schedule lines. What logic can be put in the mapping so that the correct scheduling line is picked for the GI date to be compared against?
Example:
Sales Order 123
Item 10 Product X - Quantity 10
Schedule Line 1: 11/15/2014 8 pieces
Schedule Line 2: 12/15/2014 2 pieces
Let's say first shipment gets delayed 2 months and ships 1/15/2015
Due date in report should know to select 11/15/2014 to calculate that shipment was late 60 days
Any way to link delivery document to a specific schedule line??
Thanks!!

Hello,
Just did similar development for customer report. List of deliveries based on sales order number and sales order line item numbers. Sort these deliveries either with number or actual goods issue date. Compare goods issue quantity with schedule line quanity and start allocating deliveries to schedule line. For example
Schedule line 1 - 10 MT, Schedule line 2 - 5 MT. Now you have created 3 delivery. First with 7MT, second with 5MT and third with 3MT. Your first delivery will be for first schedule line. Your second delivery is for first and second schedule line and your thrid delivery will be for second schedule line
Regards,

Scheduled ship date not taking PO need by date

1. Please consider following case -
a. Sales order is created for org UK for item A for 10000 qty 24-Mar-2011 with order request date as 29-Mar-2011.
a1. There is no on-hand in UK for item A.
a2. The item lead time for item A, as defined in UK org in item attributes’ Lead times tab, is as following -
a21. Pre-processing time - 4 days
a22. Processing time - 20 days
a23. Post-Processing time - 1 day
a3. A standard purchase order for item A is created for 15000 quantity on 25-Mar-2011 with Need by date as 10-Apr-2011.
a4. The ATP rule that is attached to the item, is having Purchase orders checked, under supply sources.
Observation : Before purchase order creation, the scheduled ship date on SO was 28-Apr-2011 (item lead time of 25 days).
Then the PO is created as in point a3 and ASCP plan was run. The sales order line for item A is unscheduled and Rescheduled, the scheduled ship date becomes 25-Apr-2011.
Questions :
1.     Why did the scheduled ship date change to 25-Apr-2011?
2.     What all things it is taking into consideration?
3.     As per our understanding, the scheduled ship date should have been changed to PO Need by date. But this didn’t happen. Is our understanding flawed?

Hi Sandeep,
when we try to Rescheduled out the PO and the request is errored out the with the error:-
Start of log messages from FND_FILE
reschedule fails
old date in planner workbench: 19-MAY-11
new date: 07-JUN-11
header: 417474
line: 605652
po number: 2049031859
shipment no: 1
The need by date/promised date in the source instance is not the same as the need by date/promised date in the destination instance.
In the source instance,
The need by date is 19-MAY-11, and the promised date is 19-MAY-11
End of log messages from FND_FILE
---------------------------------------------------------------------------

Iphone 6 expected ship date of 10/3

I had an expected ship date of 10/3. I called earlier to find out if the phone would actually ship and they told me that the order was held up due to a change of address...Really?!? I called DAYS before and asked to change the shipping address and after 20 minutes they told me I couldn't until the phone was shipped. So now they still have no answers as to when the phone will ship. Verizon needs to get it together!!!!

My shipping date changed about a week ago to 10/3 for an iPhone 6+ 64GB Space Gray. When I pre-ordered on the 12th, it was expected 9/19 delivery date. Confirmation email came back 2 hours lated with 10/7/14 (very not cool of Verizon - never ordering anything from them again for misleading ship dates and then never formally addressing the problem). From there, the order shipping status was "Unavailable" for about a week, then it was showing 10/7/14 for a few days, and now its 10/3/14. I'll let you know if it changes.

Table - Issue with Logging Data Changes

Hi Experts,
My client's requirement is to log data changes happened in a table which is critical. I've selected 'Log data changes' check box in technical settings of the table. Now, I'm able to see log for all the changes i did after that. But, I'm facing following issues. Kindly help me in fixing the same.
1. The table is having two fields with same data element. In the change log SCU3, under the field name, field label mentioned in the data element is getting displayed. As, the data element is same for two fields, its difficult to find out which particular field is changed. Is there any way to display table field name instead of field label from data element?
2. Sometime, even there is change in the data record, I'm able to see a log record in the change log with caption 'Data record unchanged'. What might be the problem and how to resolve?
Thanks in Advance,
Siva Sankar.

Hi Moha Nan,
You just use ABAP to change the table P? In this way I think it is not change to X table.
You can upload master data to add navigation,it is a good way to bulid the SID of P table and X
table .
Hope it is help to you!

Shipping date issue in ASN

Hi Folks,
I am giving shipping data as 25.08.2011 in PO item.When iam clicking Create ASN tool bar button in PO item level.Then it will move to Create ASN screen.But in Create ASN screen shipping date is displaying as some unknown format 01. 2. 10:82:5.
How can i approach to resolve this issue.
Thanks in advance.

Hi Srinivas,
Check whether SAP note:1378589 is relevant for your issue.
Regards,
Nikhil

How to update Item level shipping data when item category is changed

Hi All,
My requirement is when user changes a sales quoatation item category value and presses 'Enter' then based on item category's value the corresponding item and it's sub-items' shipping data(delivery status) should be modified.
To achieve the same, i tried implementing the BADI CRM_ORDERADM_I_BADI which gets triggered when user makes changes in sales quoatation item level and presses enter. Now my query is within this implementation i am not able to use CRM_ORDER_MAINTAIN as it throws "Recursive_call" error so how can i update item level shipping within this implementation?
Regards,
Bharathy.

Hi Shwetha!
I have never used this FM....but i have had a look and u hace to update the structure:
PRODUCTS STRUCTURE BAPIBUS20001_PRODUCTS
In this structure: BAPIBUS20001_PRODUCTS-SHORT_TEXT.
Regards,
Mon

Shipping Date Change issue in SNC

Similar Messages

Maybe you are looking for