Shipping Notification with reference to a Purchase Order

Hello all,
I want to know how to create a Shipping notification referring to a import purchase order.
regards
Ashish

Hi
Follow as per blw
Config:
Go to SPRO-MM-purchasing-Confirmation-setup confirmation control
here select the 10 and check the check box Create inb delivery
then select the line and click on the confirmation seq and make GR relevant, MRP relevant and GR assign (all three box checked)
Process Flow: -
1. ME21N - In PO, Confirmation Tab, select the confirmation control key as "Shipping Notification" or "Inbound Delivery"
2. VL31N - Create Inbound Delivery w.r.t. PO
3. MIGO - Goods Receipt > Inbound Delivery
If you donu2019t select the conformation control key in the PO than system wont allow you to create the Inbound delivery against the PO.

Similar Messages

Create an outbound delivery with reference to a purchase order

Hi folks, would you tell me if I can create an outbound delivery with reference to a purchase order?
I tried to use the transaction VL10B but after I run there is no data is selected. Should I set up anything else for that?
Thanks in advanced.

Hi,
Yes, you can create outbound delivery with reference to a PO.
In transaction VL10B, if you are not sure about the shipping point leave it blank. ALso, you can check the shipping point from the shipping data and enter it here.
Leave the field Condition rule to create delivery blank so that it will consider PO with delivery date falling within one year.
In the Purchase order tab, enter the PO number.
Execute. It should fetch you the PO list due for delivery.
Before doing the above, make sure PO is not subjected to release strategy. Check the quantity in the PO due for delivery.
Thanks and Regards,
Maheshwari

With reference to contract Purchase Order Analysis report.

Hi,
I need SAP Standard " With reference to contract Purchase Order Analysis report"
Regards,
Priya.

Hi,
there is no standard report to get the PO list wrf to contracts,
but you can get through SE16 from the table EKPO, where you have to pass the contract numbers ( get through ME3L,ME3M or ME3C ) in the field KONNR,
lakshmi reddy

Create Return PO using ME21N with reference to Original Purchase Order

Dear Experts,
Does anyone knows how to create Return POs with reference to Original Purchase Order using ME21N. The Purchasing Department will be initiating the Stock Return to Vendor so we don't want to use MB01, 161 Movement Type to create the return PO. Can anyone help.
Thanks.

Hi,
It is not possible to create a Return PO w.r.t. the original PO. Even if you will copy, it will just copy the details from PO but not store the reference of original PO in return PO.
Better instead of creating a new return PO, add a separate line item in the orginal PO by marking it as "Return" and perform all the subsequent transactions. This will provide the better traking and reporting. But this may affect your release strategy (need to be tested).

How can I create a sales order with reference to a purchase order?

How can I create a sales order with reference to a purchase order?
Thanks in advance...

Hello,
you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
Prase.

ME21N Create Purchase Order with reference to previous Purchase Order

Hello Expert,
Previously have been using Purchase Info Records for reference when creating Purchase Orders using ME21N. We then have deleted the Pricing Condition in the Purchase Info Record using ME12. Now when we are trying to create a new Purchase Order with the same values (Vendor, Material, Plant and Storage Location), the transaction code ME21N automatically fetches the previous values of the Pricing Condition as if it was cached. I remember of studying this in the MM academy but I am not sure how to disable it.
This error only happens when we are creating the first Purchase Order after the deletion, for the second Purchase Order, error will be prompted to the user saying that the Pricing Condition could not be found.
I would like to ask where in configuration can I delete this cache behaviour or is that any work around for this.
Thanks in advance.

Hello Antony,
I found the "Update Prices" function in the Conditions Tab of the Item Details helps to refresh the data and fetch the new information from the Purchase Info Record. I would like to ask is there anyway to provoke this function automatically everytime when a user runs the transaction ME21N.
Thanks in advance again.

Creation of inbound delivery with reference to a purchase order

Hi
Everyone on the Forum, I have an inbound delivery (ASN), z that programmatically
(1) (2) I will develop, I found two modules function, BBP_INB_DELIVERY_CREATE and BBP_INB_DELIVERY_CREATE_31I. The two modules operate to create inbound delivery, only
the first mark me an error and the second error don't mark me, but not validates me any data
the purchase order. The error I marked in the function call function 'ME_CONFIRMATION_READ_AVIS'
If I can help with this issue or tell me the difference between one and another.
Thank you.

if you want to have you can use the FM ALM_ME_GOODSMVT_CREATE
hope it helps

Purchase requisition with reference to blocked sales order

Hello,
we are creating purchase requisitions (PR) manually with reference to a sales order (account assignment Z). When this sales order is blocked, we still can issue the purchase requistion.
What can we do to avoid this? I think in 2 solutions:
- use enhancement MEREQ001 to show error message when SO is blocked, so PR is not created. Is this possible?
- create a release strategy for PR created in that plant (tr. OME6). The problem is that release strategy refers to an amount in the PO, and not to other factor, like SO blocked. Maybe in the former enhancement we can set the field EBAN-GSFRG to 'X'?
Thanks for your help.

Many thanks for your answer. It help me to solve the issue.
So applying note 738171, with transaction OVB5 (or VOFM, requirements->subsequent functions->Purch.requisitions) we create one new requirement, ie RV07A900, and then we apply the rule that if we have delivery or billing block, that is, VBAK-LIFSK or VBAK-FAKSK not empty, then we set an error with a code similar to this:
            da_sy-msgid = 'Z1'.    (message class)
            da_sy-msgno = '001'. (message number)
            error_exception = true.
and then the PR is not created.
Regards.

Creation of Billing with reference to the Sales Order

Dear Friends,
I need your suggestion for the following scenario.
Client wants to create the Billing Document with reference to the Sales order.I mean when he is entering sales Order while creating the billing document ,the system should generate the billing document only for the delivered quantity.
e.g sales order is created for 100 Tons.And there are 5 delivery documents for 50 Tons.(Still the Sales order is open).
Now when billing document is created with reference to the sales order ( Not with reference to the Delivery Document) it should create the billing document only for these five deliveries.
Is it possible? If yes,how?
Thanks in advance.
Regards,
Shrikant

Hi Murali,
Currently client has software where he enters only Sales Order no and their software creates the billing for the delivery document for this Sales Order.
Here client does not want to enter multiple delivery document nos if any.He wants to enter only Sales Order no.
Regards,
Shrikant

Invoice VF01 with reference to the sales order

Dear Experts,
Our business requirement is to book the invoice with reference to the sales order without posting delivery and PGI. Provide me the step by step process to complete this configuration.
Is that suggestible to change the existing document type which the business is using by creating delivery PGI and Invoice to the document type where invoice booking with reference to sales order or I have to go with the new document type only.
With Regards
Uday
Message was edited by: G Lakshmipathi
Please dont add such text in your post which is not encouraged in SCN.

TW Typewriter
can you help, by creating the entire process in Sandbox and informing uday about the configuration steps?
At the outset, please refrain posting like this which, being a senior member of SCN, you should be aware of rules where spoon feeding is definitely not encouraged. Those sort of efforts have to be taken by OP. This forum is only to guide the people wherever they get stucked.
cc: Phanikumar V
You should also be knowing the forum rules and I thought, you would have expressed like what I said above.
G. Lakshmipathi

Single Invoice with reference to 2 Sales Order

Hi,
How can i make a single billing invoice no (vf01) with reference to 2 sales order?
billing plan has been maintained from each sales order,we dont have any pgi process.
so process is sales order->billing plan-> invoice
my user want to generate single invoice with reference to 2 sales order - same customer no.

For processing billing due list (VF04) - The system combines documents with the same customer number, proposal billing type and sales organization, and attempts to include them all in the same billing document. If the preconditions are met, then a single invoice is created for the deliveries and/or orders.
To do a collective billing. Collective Billing Documents
The selected documents in the billing due list are billed. The system tries to combine them as much as possible. Processing of the selected documents is carried out in the background. After processing of the documents, you return to the billing due list. The sysytem will indicate whether or not a document has been billed successfully.
If successful, then Save
You can also carry out a simulation of billing. In this case, select Simulate. The system simulates the collective billing / online function described above.
-After the collective run you can display a log for the collective run. This displays possible errors during billing.
-You can also branch to the resulting billing documents, in order to carry out a split analysis.
-The billing documents of a collective run can also be canceled.
Re: VF04
Hope it assist you.
Thanks & Regards
JP

TO CREATE AN INVOICE WITH REFERENCE TO THE SALES ORDER

I have a credit memo request(sales order) and I need to create a credit memo(invoice) on saving the sales order without creating the delivery order in between.The invoice(credit memo) must be created directly with "reference" to the sales order(credit memo request) without the delivery order in between

Hi,
You can deliver the standard sales order by VA02 going to sales document-> deliver.
then save it it will give you outbound delivery number then go to vl02n the do the PGI of the same.
and for Invoices first create billing document byVF01 then create invoice list VF21
Thanks
Ankur
Edited by: Ankur Sharma on Jul 23, 2008 7:51 AM

Credit memo with reference to a sales order with reference to a contract?

Hello All
Now I created a quantity contract and the customer paid the Amount that means the billing is done then I started creating sales orders with reference to the contract, can I create credit memos with reference to these sales orders?
Regards
Jacopo Francois

Hi,
You can create a contract for a longer duartion say 1 year, andyou can create sales order in reference to your contract. This would be an ideal scenario in case of service materials.
You can now surely create credit memo's in reference to this sales order.
You will invoice the sales order first and create a credit memo request in reference to your sales invoice and then invoice the credit memo request to raise your credit memo for the customer.
Reward if helpful.
Regards
Ravi

Create a Sales order with reference to another sales order using BAPI

Dear All,
Can any one tell me what are all the parameters required to create a Sales order with reference to another sales order using BAPI_SALESORDER_CREATEFROMDAT2....
Thanks in advance

Hi Madhan
Thanks a lot for your reply.
However, I would like to know which parameters need to passed in this BAPI in case of SO creation with reference. I beleive there are only a few parameters that need to passed in ORDER_HEADER_IN, ORDER_ITEMS_IN, etc.
Need to know exactly which are these parameters.
Regards
Mihir Shah.

One sales order with reference to 2 sales orders

Hi Gurus,
can v create one sales order with reference to 2 sales orders?
i think it is not possible, but if there is any chance let me know?
Cheers,
Sumith

First u need to ensure whether copy controls are maintained between the documents (say Ex ZOR ---> ZOR) here i am assuming that ur source and target document are of same type)
Maintain the controls.
Then u need to create the source documents and save.
Then, u need to create the target document by using the create with reference button, enter the first reference order no and proceed further. ater entering into the order, again u need to press the create with reference button for the second time to enter the second reference order.
Now both the order items will come to a single order. now u can proceed further
Hope it is useful...
reward points if u found useful..

Shipping Notification with reference to a Purchase Order

Similar Messages

Maybe you are looking for