Shipping of sales order line

Hello,
Currently we are unable to pack a single SO line quantities in a box and based on the size of the products will be packed in multiple boxes. Can some one help to understand implication of this scenario on pick release, delivery and tracking of goods intransit to end destination.
For E.g.:
Laptop*123 ---- qty packed in 3 boxes which carries partially quantities of laptop*123.
Does it has any issue for pick release? ?
How many delivery will be created? ?
Regards,
Edited by: user604737 on Oct 13, 2011 8:08 AM

Please provide the complete simulation with correct data...
For information solutioing may be related to packing method setup with cantainerization ........
Regards, Ravi Malhotra

Similar Messages

  • Is qty shipped against Sales Order visible in ASCP workbench?

    Hi
    Is it possible to view qty shipped against Sales Order in ASCP workbench either in collected data or plan output?
    Regards,
    Utkarsh

    Hi Utkarsh
    There are a few scenarios which may happen if there is a shipped qty against a sales order line:
    1. Qty Shipped is within shipping tolerance - Sales order line will be closed and its no more an active demand for planning (assuming inventory/ invoicing interface etc are already run). While this SO line still may be collected in APS, its only used for forecast consumption purposes.
    2. Qty Shipped is outside shipping tolerance - Sales order line will be split automatically with shipped line being closed (with same behavior as above in #1) and new line with balance quantity.
    Thus, planners WB doesn't need to show shipped quantity though I'm interested to learn the business objective for requesting this information in Planner's WB?
    Thanks
    Navneet

  • Sales order line cant be closed....the WF line has the status DEFERRED

    Hello,
    Hope you can help me out with this...
    I have sales order line which can not be closed because it has the status ORDER_CREATED_MANUFACTURING....when i check the Workflow and rewind the last activity which is DEFERRED it doesnt change, it keeps like that....somebody knows what is happening?

    Check if you have created a work order to fulfill the sales order line. Cancel the work order if you are not planning to ship the sales order line.
    Check if there are any reservations to that line. Cancel the reservations if you are not planning to ship the sales order line.
    Then check the line status - it should become awaiting shipping.
    Try to cancel now.
    Sandeep Gandhi

  • When running the workflow background process for drop shipment order, sale order line's status gets automtically closed instead of awaiting shipping

    Hello friends,
    I am created a drop shipment order with all the setups done . now i have booked the sale order as source type external. but when i run the workflow background process , after completing the report when i check the sale order line status it changes to "closed" instead of "awaiting shipping".
    Plz guide me if i have missed something in the setups.
    thanks,
    Sachin

    Hi Sachin,
    pls check the below notes from MOS
    Drop Ship Sales Order Cycle In Order Management (Doc ID 749139.1)
    Vision Demo - How To Create A Drop Ship Sales Order/Purchase Order (Doc ID 1060343.1)
    Thanks
    -Arif.

  • How to enter serial number for sale order line  which is in shipped status

    Hi All,
    We have 2 different items which are defined as Serialized at Sale order issue at item definition.
    In one sale order,User has forgot to add serial number to one of the item at Ship confirm stage.
    He has entered serial number correctly to other item.
    Now the both Sale order lines are in Shipped status if we view them through Shipping>transactions.
    I am technical guy and new to OM.Could you please let me know the process to enter the serial number for the item to which user has missed it
    Thanks,
    Satya

    Hi Satya,
    Since the item is already shipped, you cannot enter serial number for this line.
    you have to enter serial numbers after pick confirm only.
    check this note
    How to Enter Serial Numbers in the Shipping Transactions Form [ID 1235403.1]
    As a workaround for the previous lines do RMA and try to receive the goods back to your subinventory.
    For all new transactions follow the above notes.
    Thanks
    -Arif.

  • Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

    Hello Experts
    I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
    For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
    Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
    My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
    use GR Doc date as billing date
    3rd party sales process (w/o ship notif) - Billing

    Hi Lakshmipathi ji,
    As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
    For Ex
    Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
    Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
    So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
    Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
    Regards
    Hiba

  • SALES ORDER LINE IS CANCELLED BUT DELIVERY DETAIL IS SHOING AS BACKORDERED

    SALES ORDER LINE IS CANCELLED BUT still the DELIVERY DETAIL IS showing as BACKORDERED it should be in cancelled
    status.The Sales order (only one ex:3904854) is cancelled , however order in shipping transactions screen indicates order is on backorder.
    at that time of order cancellation the line level workflow error out due to the Workflow package is inactive .
    I tried to resubmit the error out workflow using retry option from the responsibility “Workflow Administrator” the workflow is completed with forcible option but still the delivery detail is in back order status not changing it to cancel status.
    Error Name :-4068 [Error Process Error: WF Error Message: ORA-04068: existing state of packages has been discarded  
              ORA-04061: existing state of package body "APPS.XRX_SUPPLIES_NEW_WF_PKG" has been invalidated    
              ORA-04065: not executed, altered or dropped package body "APPS.XRX_SUPPLIES_NEW_WF_PKG"                         
              ORA-06508: PL/SQL: could not find program unit being called: "APPS.XRX_SUPPLIES_NEW_WF_PKG" [Error Process           Error: 3114: Activity 'WFERROR/R_ERROR_RETRY' is not a process.]
    Error Stack: Wf_Engine_Util.Function_Call(XRX_SUPPLIES_NEW_WF_PKG.XRX_CLOSE_LINE_DETAILS, OEOL, 55098479, 195982, RUN)
    [Error Process Error:   Wf_Engine.CreateProcess(WFERROR, WF5147218, R_ERROR_RETRY) ]

    Mohan
    You need a simple script to get the status corrected. Log an SR or search metalink for the script. I am sure there is one out there (if you search with the orphan reservations). This script supported, but not exactly targeted at your problem But it will solve it. You can log an SR and confirm.
    Thanks
    Nagamohan

  • Sales order line with status calcelled picked by auto invoice program

    I cancelled  one line in Sales Order and Shipped remaining lines
    after Ship Confirm process ,I ran workflow background process.
    I am getting cancelled line information to AR interface tables
    when I run Auto invoice amount is sitting in Unearned account
    The status of cancelled line -  Cancelled
    Flow status code is cancelled
    INVOICE_INTERFACE_STATUS_CODE I AM SEEING is YES for that line.
    Why the cancelled Sales order line is picked by auto invoice program?
    Thanks,
    John

    Hi Ivruksh,
    Thanks for the reply, the reference you gave was not actually related to the issue I had, let me put it this way,
    Our Auto Invoice Job is scheduled at midnight, it runs and process only few CM's, rest of them are left behind with out any error message in error tables. Al I can see in the ra_interface_lines_all table is interface_line_id is populated, which shows that the Auto Invoice program has picked all the records but it is processing only few, the rest are left out with out any error message.
    Interestingly, when I tried to run those stuck CM's Individual one by one its gets successfully processed.
    Is anyone faced with similar kind of issue, kindly let me know of any solutions you guys had.
    Thanks in advance.
    Regards
    Srinivas

  • OM: Sales order lines are cancelled automatically without backordering.

    Intercompany sales orders lines are being cancelled automatically on the delivery when a split line is shipped with a quantity of one remaining. This line should remain backordered. A quantity of 61 was entered and 60 was shipped and 1 remaining. This 1 should have been backordered but no new line was automatically generated and infact when I view the Additional information I can see that the quantity 1 is cancelled. The profile option OM: Under Shipment Tolerance is set to .5

    HI,
    You can cross check by running the AUDIT HISTORY REPORT in Order Management, which gives the in depth details of the sales order amendments.
    Thanks,
    Raghav

  • Cancel Sales Order lines that are picked

    Hi
    1. I'm trying to cancel sales order lines through process order api that are picked and delivery status is Staged/Pick Confirmed. The error is
    You are not allowed to cancel Order Line because:
    Line has been pick confirmed/staged.
    I'm unable to perform by below means
    1.There is a processing constraint on the field SCHEDULE_ARRIVAL_DATE.
    Delete the processing constraint and retry the cancel line process - Processing constraint form the fields are protected against update
    2.Navigate to the shipping transaction form and query the order. Select the line and enter 0 at shipped quantity.Save the record.Ship confirm the line, this will cause the line to be backordered.Query the order line in the order entry form and cancel this. - Shipping transactions form the fields are protected against update
    2. Is there a way to cancel Internal Sales Order(ISO) lines of one OU and the corresponding internal requisition is another OU
    Thanks
    kumar

    If you are in R12, there are some enhancements from Oracle that allows updating/cancelling certain Internal requistion fields and Internal orders automatically. You may need to disable few processing constraints too.
    As of Now Oracle support change to following attribute at OM side
    1 Order Quantity
    2 Request Date
    3 Schedule date
    4 Arrival date
    Similarly if we make changes in following fields in Approved IR
    1 Quantity
    2 Need by Date
    These changes will got reflected in ISO
    Plus cancel the IR line or ISO line, the other one gets cancelled automaically.
    To cancel the picked line, first undo the pick confirmation process by back ordering. or unassign the delivery details from the delivery (if created already) and cancel the delivery.In either case, you need to manually trasnfer the qty from staging area to original locations. Oracle doesn't automatically move the qty back, (undo move order transaction).
    Ganesan.

  • Copying text from CMIR (KNMT) to the Sales Order Line Item

    We need to copy text from the CMIR (KNMT) to the Sales Order Line Item with two steps in the access sequence. First to look up by the Ship to Partner Function.  If doesn't exist, then look up by Sold to Partner Function.  Have setup a new text id (ZPRN), a new access seq (9011).  The access seq has one seq =5 for KNMT, ZPRN, all languages and that saves fine.  When I set the Partner Function to be SH.  I get the following error msg:
    "The Language does not come from the partner function AG for MVKE".
    Any ideas?  This access seq does not reference MVKE. It only references KNMT.
    Thanks!

    Hi Lisa,
    Just stumbled on this post, as I am searching for something similar.
    What you are attempting to do isn't possible in config.
    This is because as standard Customer Material Info Records are not even considered for ship-to party in the sales order.
    They work for sold-to only.
    Therefore, this funny error message is SAP's way of saying, "Why are you trying to enter a partner here, because the data is determined for sold to only?"
    You can change this with development for other fields (ie, to determine delivery plant, tolerances etc at ship-to) by using
    the exit MV45AFZB with the USEREXIT_CUST_MATERIAL_READ form.
    However, even if you do this, Text Determination is still sold-to only and still doesn't behave.
    I am currently looking myself for a solution for this problem and I will let you know what I find.
    Cheers
    Chris

  • Sales order line item user exit?

    Hi Folks,
    Can any one of you suggest me an user exit in sales order line item level?
    I want something which stops before/ or just after entering the quantity in the item level.
    We wanted to set up a issue which deals with rounding profile comming from CMIR record to take from Ship-to rather than standard Sold-to party functionality.
    Thanks a TON in advance.
    Praveen.

    Praveen,
    Check this post
    https://forums.sdn.sap.com/click.jspa?searchID=7098802&messageID=1674246
    Regards,
    Satish

  • Manual price change on Sales Order line

    Hi everyone,
    Say I have a product A and have entered this in the price list Product A = USD 100 per unit.
    I create the order and process the order, do ship confirm, but at the time of creating the invoice, I want to change the price to 97. or 95 or whatever. This is not fixed and depends probably on various business factors not in anyone's control.
    I tried to manually change the price on the sales order line, but it is not allowing me to change, saying 'no manual discounts available'. My questions are :
    1. How can I manually change the price of a product at the time of invoicing?
    2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
    3. At what level can the price be changed? at order booking or even after ship confirm?
    4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
    5. Do I need to make this price change in the price list also?
    Pls reply asap.
    Thanks a lot in advance.
    Sudhindra Desai

    Hi Sudhindra,
    Check out if this helps:
    1. How can I manually change the price of a product at the time of invoicing?
    You cannot change the price once invoicing is done or when the Order Line Status becomes 'Closed' . Any change at the order entry level can only be effected till the Order Line Status is in 'Entered' Stage.
    2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
    We have defined a modifier for our business purpose where by we can manually change the Price at the order entry level. If you require I can send you the screen shots of the setups we have done. I would need your e-mail id for that.
    3. At what level can the price be changed? at order booking or even after ship confirm?
    Price can be changed till the order is in 'Entered Stage'. It cannot be changed once it is 'Booked'
    4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
    I did'nt understand this question actually. I think the price change is done on an order to order basis, if it is done for a particular order I don't think so it would affect further orders. If i'm changing the price in my price list then surely it would affect future orders.
    5. Do I need to make this price change in the price list also?
    This depends on ur business situation. If the price change is permanent u can make the changes in the price list also. Our business situation demands a base price to be defined in the price list even though the price we enter at the order entry level is always different from what comes from the attached price list.
    Hope this helps you.
    Regards,
    Anil Wadhwa

  • Tracking Number Information in B2B sales order line item

    Hello Experts
    Does anyone aware of the settings to be done to get tracking number (e.g tracking number given by DHL, Carrier Company) displayed on sales order line item.
    Following steps has been followed, but we can not see the tracking number at the line item level:
    Tracking the Shipping Status
    You can enable customers to track the shipping status of their Web shop orders using an external shipping provider. If the external shipping agency offers shipping information on the Internet, customers can access the shipping status directly via a hyperlink from the order. This enables customers to track their delivery during the shipping process.
    Prerequisites
    u2022     Your appointed haulage firm offers the shipping status tracking service.
    u2022     The haulage firm has assigned a bill of lading for each order and informed you of it.
    Activities
    1.     Call transaction VL03N in the ERP system.
    2.     Choose Display <-> Change.
    3.     Choose   Goto  Header  Partners  . Enter the data of the corresponding carrier.
    4.     Choose Shipment. In BillOfLad, enter the tracking number.
    Folks, any help will be highly appreciated
    Thanks
    DJ

    Hi DJ,
    Most of the settings that are required to display the tracking number in the web shop are ECC dependent. The function module that gets the tracking related information in the Run Time is CRM_ISA_BASKET_STATUS_ENH.
    In the above function module at line number 383 contains the relevant logic to get the tracking related information from the ECC system. At this line number the function module BAPI_XSI_GET_VTRK_G is called remotely in ECC.
    ABAP Stack in ECC:
    BAPI_XSI_GET_VTRK_G (FUNCTION MODULE)
                XSI_CREATE_TRACK_URLS (FUNCTION MODULE)
                                    TRK_GET_URLS (SUBROUTINE)
                                                    XSI_CREATE_TRACK_URL_MULTI (FUNCTION MODULE)
                                                                    XSI_CREATE_TRACK_URL (FUNCTION MODULE)
    Transaction Codes where the settings need to be done in ECC:
    1.     VTRC - Maintain Express Delivery Company
    2.     0VVT - Set Up : Express Delivery Company
    3.     VTRK - Parcel Tracking
    Database tables relevant for Tracking in ECC:
    1.     VXSITDU u2013 Express Delivery Company : URLs
    2.     VXSITDL u2013 Express Delivery Company Data Field
    3.     VTRKH u2013 Tracking Data Header
    4.     VTRKP u2013 Tracking Data Item
    5.     VLBL u2013 Express Delivery Company Data Field
    6.     TCAVAR u2013 Carrier URL Connection (Substitution of Variables)
    7.     TCAURL u2013 Carrier URL Connection
    8.     EKES u2013 Vendor Confirmations
    Best Regards,
    Chanakya Reddy

  • Sales Order Line Flow Status Code

    Hi All,
    When the sales order is "Pick confirmed", why the Sales Order Line Level Flow Status Code remain "AWAITING_SHIPPING" in table level.
    Thanks
    Ram
    Edited by: ram on Dec 2, 2008 3:15 PM

    Ram
    When the order line is in shipping process, there can be many stages it can go through. Those stages or statuses you can find in the delivery details. As far as the order line is concerned, the line is in shipping area.
    On the screen you see the status as Picked, because they use the order line status in conjunction with the delivery detail status to show that.
    Thanks
    Nagamohan

Maybe you are looking for