Shipping point 01 loading group plant storage location not defined.

Hi All,
I have a unique problem where iam getting the above error when sales order is created using incomplete log.
I have checked all the settings related to Shipping point
in OVL2  Shipping point are assigned,
in OVL3 picking location is also assigned.
I have been searching entire SDN and help.sap.com for the above error for last three days and post a new thread.
Please help, points rewards.
Regards,
Vinod.

Dear Vinod
First of all I am really happy that you have taken the trouble to find out a solution to your problem and since you were not able to get it, you had posted a new thread.  Of late, this is very rare people searching the forum b4 posting. 
Coming to your problem, go to customer master Sales Area tab and see in Shipping tab, what Shipping Condition is maintained.  Ensure that the same is maintained in OVL2.
Similarly, the same for Loading Group.  Normally, by oversight, people commit mistakes by maintaining differently which is not assigned in masters and this would have missed your attention.  For example, you would have assigned 01 in customer master and in OVL2, you would have maintained 03.
Also, please ensure that in OVXC, you have assigned shipping point to your plant.
thanks
G. Lakshmipathi

Similar Messages

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • Creat Shipping point configuration for plant

    Hi
    I want create shipping point for plant XYZ.
    I need to create shipping point, so that I can maintain country and Transportation zone for the same.
    Request you please tell me where i can configure in IMG?
    What is the step by step process for setting shippong point for anty plant ?
    Vicky

    Hi Vicky,
    Shipping Point Configuration:
    1) SPRO->Enterprise Structure->Definition->Logistics Execution->Define, copy, delete, check shipping point...  for Defining the Shipping Point
    2)SPRO->Enterprise Structure->Assignment->Logistics Execution->Assign shipping point to plant... for linking Shipping Point with Plant.
    3)SPRO->Logistics Execution ->Shipping->Basic Shipping Functions->Shipping Point and Goods Receiving Point Determination->
                 ->Define Shipping Conditions
                 ->Define Loading Groups
                 -> Assign Shipping Points ........ here you enter the combination of Shipping Condition, Loading Group, Plant for  determing the Shipping Point which can be one default and many manual.
    Regards,
    Karthik

  • Ship.condition 01 loading grp 0003 plant MCP1 StLoc not defined Message no.

    Dear all
    Why I am getting this message when i try to add shipping point at item level in Quotation "Ship.condition 01 loading grp 0003 plant MCP1 StLoc not defined Message no.V1358"
    Kindly help me to resolve this error.
    Thanks and Regards
    M.Dheerendar Jain

    Hi
    check the following
    Check your shipping conditions in sales order header shipping tab + loading group in material master + plant in sales order,
    verify the same in OVL2, whether its mainatined or not.
    1. Shipping condition maintain in Sold to party of ur customer master,
    2. Loading group should be maitained for perticular Sales area and plant in Material Master for Sales: General/Plant Data.
    3. Plant should be available in sales order
    IMG -> Logistics Execution -> Shipping -> Basic shipping functions -> Shipping point and Goos receiving point determination -> Assign Shipping Points.In that determine the storage location, loading group, plant, proposed shipping point and manual shipping point.
    Combination of Shipping Point Determination=
    Loading Group - (1-Material Master Record)
    Shipping COnditions (1- Sales doc type , 2- Customer Master Data - Sold to Party)
    Delivering Plant - (1-Customer Material Info record , 2- Customer Master Record & 3-material master record)
    If you have done Copy of existing Shipping Point & renamed it. Then all the shippig Point determination Combinations will be copied.
    If not, then you need to maintain manually in Shipping point determination customization

  • Multiple Shipping Point in One Plant

    Hello.
    How to decide if we create another shipping point or not.
    We have two warehouses, located far from each other.
    The design is to have just one plant, and create two storage locations.
    Should I make two shipping points for each warehouse and assign to just one plant?
    Share you ideas...
    Thank you,

    Dear Deriada Gemma 
    Shipping point requirement is based on physical locations from which shipment is done, in case you are using Logistic execution then based on shipping point shippings will be done.
    If you have two wh and want to create seperate deliveries for both wh use two seperate shipping points
    you can automatically determine based on plant, loading group and shipping condtion.
    from help you will find few other reason for which seperate shipping point decision can be made
    list list, printing ...etc
    Define, copy, delete, check shipping point                                                                               
    In this step, you define the shipping points in your company or edit              
        shipping points that already exist. In order to adapt the functional              
        scope of a shipping point to the organization in your company, you                
        should process the following check list:                                                                               
    o   The shipping point is the top level in the organization for                   
            shipping.                                                                               
    o   A shipping point can be allocated to several plants.                                                                               
    o   A shipping point can be divided into several loading points.                                                                               
    o   A delivery is always initiated from exactly one shipping point.               
            Thus, all items of a delivery belong to one shipping point. Groups            
            of deliveries also belong to exactly one shipping point.                                                                               
    o   You can influence delivery scheduling via allocation to departure             
            zones.                                                                               
    o   The shipping point can be proposed automatically during order                 
            processing depending on the plant, loading group and shipping                 
            condition.                                                                               
    o   A shipping point has an address.                                                                               
    o   The shipping point is used as a selection criterion for lists of              
            deliveries and the work list deliveries.                                                                               
    o   The shipping point is used as a selection criterion for processing            
            deliveries like printing, picking or goods issue.                                                                               
    o   You can determine the printer destination for messages differently            
            for every shipping point on account of shipping documents.                                                                               
    Regards
    Jitesh

  • Finding Plants\Storage locations associated with the Routes

    Hi,
    I need to find all possible Plants/Storage Locations associated with the Route in hand.(These routes can be found in TVRAB table).Is there any mapping done in SAP between Routes and Plants or Routes and Departure Points ?
    If anyone has any inputs regarding this, it will be really helpful.

    Hi,
    To determine the route we need to know the Plant and the Shipping point or connection point/port.
    I think we can find the routes in table TVRO or VBLK.
    and for route descirption we go for the TVROT
    First check the tables for the Plant and shipping point then we can link to the route.
    Pls check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/560dee545a11d1a7020000e829fd11/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/17/c0b758903111d2b42f006094b9b9a0/content.htm
    Regards
    Lekha

  • Storage location and post.chge storage location not in the same warehouse

    Hi All,
    We have HU managed Storage Location, and in this Storage Location we have SUT managed Warehouse, Now while Goods Receipt we have to create inbound delivery, which is working fine and i can see my stock in Goods receipt area,, later on whicle creating Transfer Order to putaway in a bin i have a error message "Storage location and post.chge storage location not in the same warehouse" please help me with this error message. Thank you for all your inputs.
    Regards
    Samuel

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • Material block for sale in plant-storage location level

    Dear experts,
    Please help me how to block a material to sale in plant-storage location level.
    Thank you.
    Regards,
    Badruddoza

    The standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
    What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
    Could you please specify what would you like to achieve, what sales block means according to you?
    Regards,
    Csaba

  • 2LIS_12_VCITM populates the same Shipping Point and Receiving Plant

    Hi Gurus,
    We are using 2LIS_12_VCITM extractor which answers all delivery-related requirements. However when I checked the data in RSA3, Shipping Point and Receiving Plant are the same. So I checked some sample deliveries in table LIKP and it shows the correct shipping point and receiving plant (which are different to each other). I checked VL03N and table LIKP is giving the correct shipping points and receiving plants. Receiving Plant or LIKP-WERKS and Shipping Point or LIKP-VSTEL. My question is how this happened? Consequently, when I initialized in BW, shipping point and receiving plants are the same which should not be.
    Thanks for all the help.

    The data for the 2LIS_12_VCITM is not just sourced by LIKP (Delivery Header), but by LIPS (Delivery Item) too.
    Plant, in this extractor, is sourced by LIPS-WERKS instead of LIKP-WERKS. The receiving plant is LIPS-UMWRK. If you require this data, you will have to enhance the structure and create the User Exit code in tcode CMOD to extract that particular data.

  • PLANT-STORAGE LOCATION  Relation

    Hello To everybody,
    I just configured all the MM module but while creation a PO im seeing a message that says that the PLANT-STORAGE LOCATION relation doesn´t exist or the Storage Location is Bloqued.
    I just review OX09 and everything is ok, anyone has seen these before ?

    Hi,
    First of all check all your assignments.
    ie., Whether Storage Location is Created w.r.t to Plant,
         Wherher Plant is assigned to Company code or not.
    Secondly,
    Whenever you create a Material, you have to check your periods(For the Accounting Purpose).
    so go to OMSY -> Transaction code, and check the period settings.
    if not Maintain them in OBY6 -> Company code global Data.
    Thanks

  • Shipping Point Assignment to Plant

    Hi,
    Can anyone tell me the T Code to assign Shipping point to plant.
    Though. I have defined plant in Enterprise Structure, when i go the assignments and try to do this assignment there is only the standard plant appering in the structure and hence am not able to assign the Shipping point for my plant.Am working on ECC 5.0
    Regards,
    Tommy

    Hello Tommy,
    Shipping point to plant assignment T Code : OVXC
    Shipping point determination path:
    spro>logistic execution>shipping>basic shipping function>shipping point & goods receiving point determination-->assign shipping point
    Reward if helpful.
    Regards,
    Priyanka
    Message was edited by:
            Priyanka Dixit

  • BAPI_GOODSMVT_CREATE - Error Storage location not supported...

    Dear All
    I am creating the material movement documetn 561 (MB1C) using BAPI_GOODSMVT_CREATE.
    Howeever, the BAPI returns me the error saying
    Storage location not supported. 
    What is this about.  Can someone give me hint
    I searched the forum and not able to find it.
    Regards,
    Venky

    Hi Venky,
    Are you creating a goods issue with reference to a reservation? If so, the documentation states that the storage location is only needed if it's not in the reservation.
    The following fields may have to be populated in some cases (this is not a complete list):
    Storage location (if not planned in the reservation)
    Brenda

  • Storage location not getting determine in Sales order

    Hello All,
    Storage location not getting determined in SO, every time when i update picking i have to manually enter the storage location.
    I saw few of the response in the SCN but one thing i noticed in my system was, when i enter OVLQ i don't see OR order type, and for order type BV which is present in system assigned to MALA but still when i am creating CS order still storage location is getting determined.
    Please help me to resolve this issue.
    Regards,
    Vishwanath.

    Hi Vishwanath,
    OVLQ is Delivery type and storage location determination and not for sales order type as you assumed
    As per standard for BV cash sales order type subsequent Delivery Type is BV and hence you can see the value MALA against BV
    Just check for LF delivery type there would be storage location determination assignment
    Storage location is determined at Delivery level and not at order level
    thanks
    santosh

  • Report on QI, Blocked, Returned Stocks at Plant & Storage location level

    Hi,
    Would like to know any reports which gives QI, Blocked, Returned stocks at Plant & Storage location level.
    Regards,
    Vengat

    hi,
    What do you exactly mean say by "Returned  stock"..
    Also go through by MMBE tcode ...
    Regards
    Priyanka.P

  • Delete Shipping point assignment with plant

    In my current system there are a lot of shipping points assigned to Plants. It is taking a lot of time to delete them. Is there any easier way to delete all these assigments in bulk? Please let me know if there is any report that I can run inorder to delete them.
    Thank you,
    Ravi

    GO TO SPRO -> Enterprises structure -> Assignment -> Logestic Execution -> assign shipping point to site then search for plant and delet the shipping point which you don't want to keep,
    and
    SPRO -> Logestic Execution -> SHIPPING -> assign shipping point and delet the shiping points from shipping point determination
    Regards,

Maybe you are looking for