SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
  due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Similar Messages

  • Shipping point and storage location determination

    for one of my delivery type i had defined shipping point determination as per following.
    define shipping conditions
    define loading group
    assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
    i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

    Hi Charan
    Shipping conditions is taken from sold to party
    Pls check whether you are using a different SP and SH
    Check in these t codes
    In OVL2 are you seeing the shipping pt determination for your combination?
    In OVL3 are you seeing the storage location determination for your combination?
    If yes then shipping pt will be definately picked up in sales order
    Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
    Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
    This also check
    Refresh the whole order and try again
    If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
    Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
    So for that combination you should maintain shipping pt in OVL2
    Regards
    Raja

  • How to get automatic plant and shipping point and storage location

    hi,
    sap gurus,
    how to get automatic plant and shipping point and storage location automatically into the sales order
    i have done all the config settings for that
    but its not appearing automatically.
    regards,
    balaji.t

    Hi
    Balaji...
    U can get the plant in sales order,  by doing the default the same in customer master or in  material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
    Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
    For S loc u have to enter manually in the sales order u can not get it automatically.
    Hope this will help you.
    Thx.

  • Shipping point at storage location level in ME2O

    hi Guys,
    I am using stock transport orders at storage location level, and it works fine, we have a customizing point to configure shipping point at storage location level.
    My doubt is if we can use also shipping point det. at storage location level for creating Deliveries for Subcontracting process in ME2O.
    It works only If I customize the shipping point det. at plant level, not considering the customizing at storage location level.
    kind regards
    Brian

    Dear Ram,
    Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
    Regards,
    Amitabha

  • Plant and Storage Location determination at Item level during Copy control

    Hello Freinds,
    We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
    Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
    Thanks,
    Anup Bansal

    Hello
    You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
    In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
    YOu can maintain the coding at same place.
    thank you
    Anirudh

  • Storage location determination in delivery

    Hi,
        In sales order for each line Item (Material) I have only one quantity.
    Which is store into the one plant (e.g. CJ01) at any one of the storage location (e.g. suppose there is JL01, JL02, JL03 storage location & my material store into one of the storage location at a time).
    But my requirement is that When I am creating Delivery that time appropriate Storage location in which material stored comes automatically into the picking .
    Can  it is possible?
    If yes then What setting I have to configure to do that?
    Please help me
    thank you

    Thank you
    Actually for my one Plant there is several storage location .
    E.g. STL1
           STL2
           STL3
    & In this Scenario For each material only one quantity.
    So
    at a time only one storage location it is available.
    My requirement is that when I am creating delivery s/m should pick up right storage location (in which material available) automatically in picking tab   .
    please help me

  • Automatic storage location determination based on delivery document type

    Dear All,
    How can automatic storage location will be determined based on sales order type or delivery type.
    Ex: If the business sells the material storage location automatically determined as SL12.
    If the customer returnns the material storage location should be SL01.
    Please suggest for retun process automatic storage location determination.
    Best regards,
    Ramesh

    Dear Guru Lakshmipathy,
    Fine, but we have some picking rules are MALA, RETA and MARE.
    Currently we have onle on plant 1010 and shipping point 1010.
    storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
    can we use RETA or MARE to determine the storage location for returns delivery.  If yes kindly
    explain. And where is storage condtion available in sap.
    Best regards,
    Thanks

  • Storage location determination.

    Hi,
    I have one plant. and two stroage locations.In sto.loc 1 the total quantity is 100 and in sto.loc2 the total quantity is 50. so total quantity in the plant is 150.
    While iam creating the sales order for 120 quantity the system is confirming the quantity. While doing the delivery the system automatically picks the sto.loc2 and shows delivery quantity as 50.
    my question is why it is showing the Sto.loc2 instead of sto.loc1.
    please give me the reason.
    regards,
    vas.v.s.

    Hi,
    Storage location in Delivey is either Determine from MRP2 View Prod strorage location field ( If there is no Rule assign to delivry type for determining storage location ) 
    Generally if u go to Delivery type u will see a field name Rule to determine storage location for EG MALA ( This rule determine storage location as Shipping point + Plant = Storage location)
    If this rule is there then it will take preceedence over Material master .
    To see this rule and assignmnet
    Goto ->spro -> Logistic execution ->picking ->Detemine picking location .
    Hope this clarifies a bit

  • How to change the storage location while create delivery?

    Hi all:
       I have to question to trouble you,when I create a delivery with reference to a sales order,however every time it set storage location 'FG10' to the delivery automatically.I can modify it, but how to modify this default value?the sales order haven't information about storage location.
       thanks.
    Best regards
    lance

    Hi Lance
    Please try this:
    In SPRO, go to Logistics Execution - Shipping - Picking- Determine Picking location - assign picking locations
    here, for the reqmt plant and shipping point and storage conditions, define the applicable storage location. If you are not assigning any storage conditions in you material master, you may leave it blank. Storage conditions can be defined in the Material master in General Plant Data / Storage view.
    After maintaining this, try creating a delivery and see if the delivery gets created in the required storage location.
    Please reward points if this helps you
    Rgds
    Nageshwar

  • Situation in Storage Location Determination with Situation?

    where can I use the situation values to determine the Storage Location?
    In other words, how can I determine the Storage Location with the settings in Storage Location Determination with Situation?

    Dear Huanzhiyu,
                 Go through this IMG path you can able to define the situations as well as you can able to determine the storage location with the situation.
    IMG>Logistics Execution>Shipping>Picking>determine picking location-->Define situations and Storage location determination with situation.
    I hope it will help you
    Regards,
    Murali.

  • Storage location-determination of return-deliveries (delivery type RL)

    Is there a difference between picking storage location-determination of return-deliveries (delivery type u201CRL Returns (pur.ord.)u201D/return to vendor) on 4.6C compared to ECC6.0? Is there a SAP-note?
    Within 4.6C-system the storage location is determined based on the customizing settings (Logistics Execution \ Shipping \ Picking \ Determine Picking Location \Assign Picking Locations).
    Within ECC6.0-system the storage location in the return-delivery is always the storage location that is entered in the Return-Purchase Order. It seems like the customizing-settings are no longer beeing taken into account.

    This storace location-determination of return-deliveries (delivery type RL) in customozing that you mention is only true within the 4.6C-system. Within the ECC6.0-system the storage lcoation is always the one that is entered in the return-purchase order. In ECC6.0 the customizing settings you are refering to a no longer valid for deliveries with delivery type RL.
    The questions is why/ and is there an OSS note.

  • Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

    Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
    In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
    The customer number is used a sold-to-party in outbound deliveries.
    <b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
    If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
    <b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b>  I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
    <b>So I need to know-
    1. Which account group to use for creating storage location vendor
    2. What's the ultimaye use of this vendor code
    3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
    Thanks

    Hi,
    Define Shipping Data
    Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
    A goods receipt can be planned in the receiving plant.
    You can enter a vendor (transport vendor) in the stock transport order
    In IMG step "Define Shipping Data for Storage Location".
    You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
    Rewards If usful
    Regards
    Sanjay L

  • How are shipping point and delivery note connected ?

    I wanted to understand how is shipping point connected to process of creating delivery notes....can we configure sap using SPRO such that the delivery note creation happens automatically for certain shipping point once the order is created and saved ....and for certain shipping point the delivery note is not automatically created ( assuming we are using the same order type) but the determination of automatic DN creation is done by the value of the shipping points ??

    Actually what is shipping point?
    Shipping point is an independent org.unit which is linked to the plant and represent the point of departure or receipt of materials.
    Normally lot of shipping points are assigned to the plant.
    Relation:
                   Actually a delivery is created from a single shipping point only.. That is the reason when u complete the sales order, at the time of creating the delivery note, u are forced to enter the shipping point, without that the system willn't proceed further.
    Determination:
    It is determined with the formula of shipping conditions + loading grp + deliv. plant
    Answering to ur 2nd query,
    when u are creating the delivery from the sales order screen (by going to menu bar and click delivery), the system automatically assumes the shipping pt is from the sales order.
    But if u enter the different shipping point in delivery note creation, the system will thro an error that delivery split due to diff. shipping points.
    Hope i clarify ur queries, ur further queries are welcomable.
    Reward points if useful...
    regards
    Kaleeswaran

  • Outbound Delivery and Storage Location

    hey everybody,
    this is our status quo:
    we create a outbound delivery based on a sales order & at the end of the creation of the delivery we are doing the goods issue immediately to do the material movement. we do that, because we need a material document for the physical packer in the storage. at the start of the physical packing he gives this material document to the person in the warehouse and this person picks the needed material.
    we need a solution for our new scenario:
    in the future we want use handling units within deliverys. in these HU's we want to pack the material included in the delivery note.
    here are the steps:
    1. outbound delivery creation
    2. we need a material movement (material document) from one storage location (A) to an other storage location (B)
    3. the packer is packing the material physical and within SAP in the new created handling units
    4. when the packing operation is finished, the packer gives information to SD person and the goods issue will be done. material movement will be done from the storage location (B).
    does anyone has an idea for us?
    another information: we don't want to do the material movement manually
    best regards & TIA
    chris

    Dear,
    As per standard SAP , once you assign the storage location in OUTBOUND DELIVERY, system will tend to pick the storage location assigned to it.
    But as per your client requirement, you need to do the transfer posting from one storage location to other storage location and then you would like to post the "Goods issue" from the new storage location.
    If it has to be done, you need to update the "Outbound delivery"  with new storage location before posting the  goods issue.
    Is there any business advantage with this new process,If  so i can suggest you one work around if you are doing transfer posting with respect to "Each out bound delivery"
    Details  as Follows:
    Step-1:
    While transferring the stock from one storage location to other storage location(Movement type:311 single step), mention the out bound delivery number in "Document header text" or "Material Slip".
    Step-2:
    Then take a report of those transfer posting documents and then update all the outbound deliveries for new storage location.To update in mass, you can set BDC with the help of ABAPER
    Step:3
    Then do "Post goods issue".
    Regards,
    pardhu

  • Very urgent : shipping point and delivery creation date

    Hi :
    I have a custom table with fields :
    belnr, posnr, btyp, aufnr, ebeln, ebelp, livbeln, liposnr,matnr,wadat,kunnr,werks,bmeinh,getri,inaktiv,wabukz,erdat,aedat,loekz.
    Custom Transaction with fields :
    vbeln (field name belnr) , aufnr, delivery vbeln ( field name livbeln ),werks, mat .avail.dat ( mbdat ), transport.plan date(tddat),
    matnr, and sales order item (posnr).
    I have to select sales order , item from custom table based on plant (werks) shipping point , and delivery creation date.
    how can i relate shipping point and delivery creation date to my query.
    For delivery creation date, it should be selected based on current date+-2 and should choose MBDAT OR TDDAT which ever is earlier based on current date.
    I would appreciate if anyone can give me som idea and full points r rewarded.
    Thx.
    Rag

    Hi,
    Try this:
    select a1belnr a1posnr vbep~etenr into corresponding fields of table itab from a1 inner join vbap
    on a1belnr = vbapvbeln
    inner join vbep
    <b>on vbapvbeln = vbepvbeln and vbapposnr = vbepposnr</b>
    where a1~werks = p_werks
    AND vbap~vstel = p_vstel
    AND vbep~edatu = p_edatu
    AND (vbep~mbdat <= p_edatu OR
    vbep~tddat <= p_edatu ).
    regards,
    Anji

Maybe you are looking for