Shipping point and storage location determination

for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

Hi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja

Similar Messages

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

How to get automatic plant and shipping point and storage location

hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.t

Hi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx.

Shipping point at storage location level in ME2O

hi Guys,
I am using stock transport orders at storage location level, and it works fine, we have a customizing point to configure shipping point at storage location level.
My doubt is if we can use also shipping point det. at storage location level for creating Deliveries for Subcontracting process in ME2O.
It works only If I customize the shipping point det. at plant level, not considering the customizing at storage location level.
kind regards
Brian

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

Storage location determination.

Hi,
I have one plant. and two stroage locations.In sto.loc 1 the total quantity is 100 and in sto.loc2 the total quantity is 50. so total quantity in the plant is 150.
While iam creating the sales order for 120 quantity the system is confirming the quantity. While doing the delivery the system automatically picks the sto.loc2 and shows delivery quantity as 50.
my question is why it is showing the Sto.loc2 instead of sto.loc1.
please give me the reason.
regards,
vas.v.s.

Hi,
Storage location in Delivey is either Determine from MRP2 View Prod strorage location field ( If there is no Rule assign to delivry type for determining storage location )
Generally if u go to Delivery type u will see a field name Rule to determine storage location for EG MALA ( This rule determine storage location as Shipping point + Plant = Storage location)
If this rule is there then it will take preceedence over Material master .
To see this rule and assignmnet
Goto ->spro -> Logistic execution ->picking ->Detemine picking location .
Hope this clarifies a bit

Automatic storage location determination based on delivery document type

Dear All,
How can automatic storage location will be determined based on sales order type or delivery type.
Ex: If the business sells the material storage location automatically determined as SL12.
If the customer returnns the material storage location should be SL01.
Please suggest for retun process automatic storage location determination.
Best regards,
Ramesh

Dear Guru Lakshmipathy,
Fine, but we have some picking rules are MALA, RETA and MARE.
Currently we have onle on plant 1010 and shipping point 1010.
storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
can we use RETA or MARE to determine the storage location for returns delivery. If yes kindly
explain. And where is storage condtion available in sap.
Best regards,
Thanks

Situation in Storage Location Determination with Situation?

where can I use the situation values to determine the Storage Location?
In other words, how can I determine the Storage Location with the settings in Storage Location Determination with Situation?

Dear Huanzhiyu,
Go through this IMG path you can able to define the situations as well as you can able to determine the storage location with the situation.
IMG>Logistics Execution>Shipping>Picking>determine picking location-->Define situations and Storage location determination with situation.
I hope it will help you
Regards,
Murali.

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

Shipping point and plant

Hi experts,
In VL01N, the system pops up the message below when entering storage location, picked qty & batch. Pls help to solve. Thx.
"Shipping from shipping point 2000 and plant 1001 is not possible. Message no. VL027".
Acutally, shipping point 2000 has been assigned to plant 1001 in OVXC. In shipping point determination, shipping condition 20 - loading group 1000 - plant 1001 - proposed shipping point 2000 has been maintained. Shipping condition & shipping point between the sales order & delivery match.

Hi Cathy
Please make sure that your plant 1001 and shipping point 2000 is assigned properly
Then your OVL2 shipping point determination settings
As you are getting this error while entering the storage location
That means your OVL3 is not maintained properly
OVL3 is storage location determination settings
It is determined thro
1.Shipping point
2.Delivering plant
3.Storage conditions from MMR (optional)
In t code OVL3 maintain for Shipping point 2001 and Delivering plant 1000 and storage conditions of material maintained in MMR (plant data/storage location data 1 ) or you can keep this as blank also
For this combination maintain your storage location the key which you are manually entering in VL01N
Regards
Raja

Storage location-determination of return-deliveries (delivery type RL)

Is there a difference between picking storage location-determination of return-deliveries (delivery type u201CRL Returns (pur.ord.)u201D/return to vendor) on 4.6C compared to ECC6.0? Is there a SAP-note?
Within 4.6C-system the storage location is determined based on the customizing settings (Logistics Execution \ Shipping \ Picking \ Determine Picking Location \Assign Picking Locations).
Within ECC6.0-system the storage location in the return-delivery is always the storage location that is entered in the Return-Purchase Order. It seems like the customizing-settings are no longer beeing taken into account.

This storace location-determination of return-deliveries (delivery type RL) in customozing that you mention is only true within the 4.6C-system. Within the ECC6.0-system the storage lcoation is always the one that is entered in the return-purchase order. In ECC6.0 the customizing settings you are refering to a no longer valid for deliveries with delivery type RL.
The questions is why/ and is there an OSS note.

Situation in Storage Location Determination

Hai,
I have a scenario where I have to determine a different storage location based on the sales doc type. On searching the forum here I learnt that I should use USER EXIT to achieve this.
I want to know whether I can use situations to handle this scenario.
I am able to define situations. But where can I assign these situations? In SO or Delivery document?
Will be thankful if anybody helps me out in this issue regarding the 'situation'
Regards,
Maheshwaran. I

Hi
Storage Locations are Determined in the delivery document based on The priority rules like MALA or RETA or MARE
Here the RETA rule is Storage Location Determination determination based on shipping pt + delivering plant and Situation
The difference between MALA and RETA is these two are same (shipping pt + delivering plant)
MALA uses storage conditions as the third factor
RETA uses situation as the third factor
RETA is used in trading scenario
But both of these are used or assigned to delivery types only via t code OVLQ
So using situation will not help you to Determine Storage Location in sales doc type
Storage location is normally not determined in sales order
It is determined only in delivery
If you want storage location to be determined for sales order then you have to use user exit
If storage location is specified manually in sales order then it is copied into delivery
Otherwise it is determined using either MALA,RETA or MARE rules which we specify in delivery doc type
For sales order you have to use usetr exit in program MV45AFZZ
To determine storage location in Sale Order, there is no configuration available and it has to be achieved using exit USEREXIT_SOURCE_DETERMINATION in program MV45AFZB.
Maintain a zee table with the values based on which you want the storage location determination to happen. In the exit ask your abaper to write the code to pick up the relevant records based on the criterion and then fetch the storage location. This way storage location will be automatically populated in the sale order.
You can try incompletion procedure option
Put the storage location field in the sales order item incompletion procedure
Regards
Raja

User exit for storage location determination in sales order

Hi SAP SD Experts,
Please give me the exact user exit name where we can use for the automatic storage location determination in the sales order.
Thanks & Regards,
Rajesh Kumar Raju,

Dear Rajesh Kumar Raju
Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination. There you have to assign the MALA rule to your delivery type
Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
thanks
G. Lakshmipathi

Storage location determination at Sales Order

Dear All,
Could we storage location determine at sales order level ?
As per my requirement. Stock is available a particular plant example below
Plant
Storage Loc
Stock Available
Batch
1305
1300
10
1000190
1305
1300
10
1000890
Got order from customer is 15 Quantities and the sale order is confirmed because stock is available but at the time of delivery storage location is determined on the particular material so batch is picked automatically on base quantity other other is showing open. So could u plz give me solution for storage location determination on sales order level.
Thank You!
Chakradhara

Being an old member of the forum, I dont want to highlight the importance of adhering to forum rules. This topic has been discussed many times here and if you search in SCN or Google it, you would accept this has been discussed many times. Please adhere to forum rules and avoid posting such repeated queries.
G. Lakshmipathi

Shipping point and shiptoparty

hi,
can u pls tell the differnce between the shipping point and shiptoparty and sold to party and unloading poing and loading point ......................
tell me in ur won words
regards
Guur

Hi,
Shipping point : The physical location (for example, a warehouse or collection of loading ramps) from which you ship the item.
Use
You can predefine shipping/receiving points in the system, based on different combinations of
plants
shipping conditions
loading groups
During delivery processing, the shipping/receiving point is the most important criterion that you use to select deliveries.
A delivery can be shipped from one shipping point only or received at one receiving point only.
If you want to provide more detailed information about a shipping point you can specify a loading point (for example, one of a number of different loading ramps).
Example
If, for example, you want to ship refrigerated goods to a certain customer by rail, the system proposes a shipping point with a suitable location and equipment for loading refrigerated goods onto rail cars.
Procedure
The system can propose a shipping/receiving point. If valid alternatives are predefined in your system, you can change the shipping/receiving point manually.
You can define a user-specific default value for the shipping point in the user parameter VST.
Ship-to-party:
i buy a gift for my friend online.
i'll be the sol-to party for the website.
My friend will be the ship-to party.
Sold-To party : The partnewr to whom i sell some goods.
Ship-to-party: The partner to whom i ship the goods.
Reward points
Regards

Shipping point and storage location determination

Similar Messages

Maybe you are looking for