Shipping point at storage location level in ME2O

hi Guys,
I am using stock transport orders at storage location level, and it works fine, we have a customizing point to configure shipping point at storage location level.
My doubt is if we can use also shipping point det. at storage location level for creating Deliveries for Subcontracting process in ME2O.
It works only If I customize the shipping point det. at plant level, not considering the customizing at storage location level.
kind regards
Brian

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Similar Messages

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

How to get automatic plant and shipping point and storage location

hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.t

Hi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx.

Shipping point and storage location determination

for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

Hi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja

MCHB,MARD - Stock available at plant level and storage location level

Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
Prasath

Hi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful

Profit centre at storage location level

Hi Experts,
Can we define a profit centre @ storage location level?
My scenario :
The document splitting of FI is activated for the document type of FI and also the profit centre is mandatory entry for any accounting document that will be created so when I am trying to post a MIGO I encounter the error
"Balancing field "Profit Center" in line item 001 not filled"
We have a option of maintaining a profit centre in plant data/storage location but i will be updated in the profit centre field of Costing1 view . But we does not want to upadate in costing view of material master data.
Basically We want the system to determine profit centre based on storage location in Goods reciept transaction .
Helpful Sugestions on this would be helpful & rewarded max .
points.
Regards,
Patil
t

Hi Raju ,
Thanx for the reply.I am Basavarajs Collougues.
Our Enterprise Structure of our Client is as follows
One company code is assigned to one plant and we have treated all the branches across India as Storage locations.Each Branch (Storage Location- MM) is configured as Profit centres in FICO.The goods are procured for a storage location.
By using the functionality of document splitting, the profit center field is made mandatory for all the accounting documents generated in the system. Now we are trying to post a goods receipt against a Purchase Order, the system is giving error "Balancing field "Profit Center" in line item 001 not filled"
The option is there to maintain a profit center at the plant level.But we have several storage locations under the plant and each storage location has to be linked with the particular profit center. So that, while doing goods receipt the system should determine profit centre based on the storage location in purchase orders.
Please suggest on this.
Regards,
SVU123

MRP at storage location level with external requirements

HI,
We have to have reorder point planning at storage location level. Also we need to consider external requirements.
When I am setting storage location MRP indicator as 2 and putting Reorder point and replenishment quantity, then after running MRP it only considers the replenishment quantity but it doesnot consideer any external requirements.
Help me out how to configure the requirement?
Regards
Sukant

Hi,
I think your question is answered by Sarita Doddi.
If you have several storage location for your plant, you cannot plan for them separately unless you assign them to a separate MRP area.
If a storage location (alone) is assigned to an MRP area, it means you wan to plan for it separately. If several storage locations are assigned to an MRP area (or let's say to a plant), it means you want to plan using all of them - and you cannot choose only one and plan for it (you can exclude a SLoc from planning w/o assigning it to MRP area).
So, planning is not SLoc wise, it goes MRP area wise.
BR
Csaba

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

MC.9 drill down at storage location level

In mc.9 report stock against plant xxxx at storage location drilldown
I see
In total valuated stock is 0
But
at storage location 0040 I see 423.686 as valuated stock
and at storage location 5M06 I see minus 423.686 as valuated stock
Client need to have not stock at plant level.
In total I see 0
But client is bothering about valuate stock he is getting at storage location level.
Thanks,
Kiran

Hi Jurgen,
For plant xxxx there is nil stock in mc.9 report. only I see sloc to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
What should I suggest to user and finance.
Thanks,
Kiran

Opening and closing balance values at storage location level

Dear all,
I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
All values are in USD
Storage location:      1001     1002
Opening Balance:      2000     3000
Receipts:                           1000      2000
Issues:                            2000     3000
Closing Balance:      1000     2000
Please help in this regard (I want value of the stock only, not qty)
Regads,
Veerappa
Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PM

vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP.

Stock valuation down to Storage location level

Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.

Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further?

Storage Location level ATP check with CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Storage Location Level ATP check through CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,
Satish

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Shipping point at storage location level in ME2O

Similar Messages

Maybe you are looking for