Shipping point in sales order

Hi ll,
I have crearted a sales order, and i want to change the shipping point, but each time i change the shipping point it keeps going back to its original shipping point.  how can i change this?
were is the shipping point held?

Dear SAPing SAP,
you are not able to change the shipping point in the sales order due to shipping point determination settings in OVL2 transaction.
If you want to change the shipping point manually in the sales order you need to maintain that shipping point as manual shipping point in the OVL2 transactuion.
Please go to OVL2 transaction here you enter the shipping point which you want to enter manually in the sales order ,in the colomun Manual shipping point -MShPt with the combination of
Shipping conditions (Customer master)Loading group(Material master)Plant-->Proposed shipping point + MShPt.
Now you can able to enter the shipping point manually in the sales order system will accept.
I hope it will help you,
Regards,
Murali.

Similar Messages

  • Modify shipping point in sales order create/change

    Hi,
    I want to modify/overwrite shipping point value while create sales order and change sales order. Is there any user exit or BADI available to fullfill this requirement.
    Thank you.
    -Pallavi

    Hi Palavi,
    You can modify or overwrite shipping point value while create Sales order or change Sales order. For this you have to modify field  VBAP-VSTEL in the FORM userexit_move_field_to_vbap of include MV45AFZZ.
    Regards
    Dillip

  • How to calculate Total Shipping Volume in Sales Order ?

    Hello,
    Please give me suggestion for calculating Total Shipping Volume or Total Shipping Quantity in Sales Order.
    And suggest if there is any existing report available to get “Total Shipping Volume”.
    Thank You.
    Regards,
    Meghana

    Hi,
    Thanks for your reply.
    I am not asking of account assignment group for material.
    My problem is when i am creating Sales Order at item level in Account assignment category there is one field for Fund Mangement account assignment grp.
    I want to activate this field and i have to enter FM area in that field.
    Plz send some solution for the same.
    Thanks & regards,
    Pankaj

  • Change pointer for Sales Order

    Hi,
    Using change pointers I want to create an IDOC when ever a specific field in the sales order line item is changed. I have activated the change pointer for message type ORDRSP. Also maintained the following entries in BD52
    VERKBELEG(Object) VBAP(Table) ABGRU(field).
    After this when I change this field at the sales order line item, it inserts entries into change pointer table.
    But my problem is creating IDOC's from those change pointer entries. I am not sure which function module (MASTERIDOC_CREATE_XXXXX) works for this.
    Anyhelp on this highly appreciated.
    Thanks
    Ram

    Hi Ram,
    I don't think so you can use change pointer for sales order changes. Usually, it is done through transaction code<b> NACE</b> - configuring condition for output type.
    You can setup requeirement in procedure control to trigger IDoc ORDRSP for any changes in item level.
    Hope this will help you and give an idea.
    Regards,
    Ferry Lianto

  • Where do we assign shipping point to sales doc.

    where do we assign shipping point to sales doc.

    hi,
    i guess this time your question is correct but answer is not. We can for sure assign shipping conditions to sales document in the document type definition at VOV8 transaction. In the shipping section we have a field to input the shipping condition. This is very used incase of cash sales.
    regards
    sadhu kishore

  • Material Staging time in Schedule Lines (Shipping Tab) of Sales order

    Hi Gurus,
    I would like to know how the time is arrived at, in the Schedule line of a sales order.
    I have maintained the Working times in the Factory Calendar. via Route Dependent with Pick Pack time as 3 Hrs 30 Min.
    and working time in Shipping point is from 08:00 to 20:00 hours.
    When i create a sales order now, i could see that material staging time is determined.
    But now i would like to know, what time should be determined here.
    Thanks in Advance,
    Regards,
    Vasim.

    Hi,'
    The following link
    http://help.sap.com/saphelp_scm70/helpdata/EN/3a/92e217b3f54a5eae7a4ac8a99e5e87/frameset.htm
    details on material staging in GATP.
    Regards,
    Mrinal

  • Error is Shiiping point  in Sales order

    Hi friends,
    Ship.condition  loading grp 0001 plant SF01 StLoc PR03 not defined
    I have a material which has been created in storage location PR03. I am trying to make a sales order but when i try to save the sales order order I am getting the above error in incompletion log.
    Can u please help me out of this.
    Thanx.
    Sriram.S.

    Dear Sriram,
            Go through this path and check the settings
    IMG>Logistics execution>Shipping>Picking>Determine picking location-->Define storage conditions, Assign picking locations.
    Transactions OMS6 and OVL3
    If settins not avail do the setting accordint to your shipping point plantshipping conditions+storage location.
    Also check the settings of shipping point dtermination in the OVL2 transaction.
    I hope it will help you
    Regards,
    Murali.
    Edited by: Murali Mohan.T on Mar 7, 2008 12:36 PM

  • Blank shipping point in return order

    Hi all,
    I have a scenario where we are NOT going to get the return goods to my plant but want to create return order and Invoice with out delivery.
    Since we are not receiving goods to our location, Is the right thing to do on Return order is not to have shipping point/S.loc and route?       
    It is actually copying the S.Loc value from Invoice and thinking about blanking out, waiting for your opinion.
    Thank you
    Chris

    Hi,
    So just wanted to know from the process the perspective, is it correct to have Shipping point and Storage location on order when there is no delivery getting created.
    If there is no delivery and sales order have shipping point and storage location then it is ok.
    If you don't want and removed then it will appear in in completion log then you have to remove it from incomplete log also
    Kapil

  • Copy Special Stock Partner Automatically from Ship-To in Sales Order

    Dear SD GUru,
    I have an issue here which needs help.
    In my partner determination, I have configured SB to be a copied Ship-To which is working now.
    So, each Ship-To has its own Special Stock Partner.
    In my consignment issue sales order, I do change the defaulted Ship-To to other Ship-To but the old "SB, Special Stock Partner" will still remain in the consignment issue order and will not change according to the new Ship-To automatically.
    Any way to make the system to refresh without manual intervention?
    Thanks,
    Soo

    Hi,
    If I am not wrong then below is the situation which you are facing:
    1. You have a sold-to-party which has multiple ship-to-parties, right or worng ?
    2. Every ship-to-party has it's own special stock partner , right or wrong ?
    Now, if first two points are right then, you might be getting a pop-up for selecting the special stock and ship-to-party partner function once you put the sold-to-party in your consignment-issue. Now, this is the point where you can select the ship-to-first and then system would automatically determine the special stock partner from the selected ship-to-party record.
    Let me know about this if my understanding and the solution is correct or not.
    Hrishi

  • Problem defaulting shipping method in Sales Order form

    Hi,
    I need to defaulting shipping method based on subinventory code value.
    e.g :
    Subinventory -- Shipping Method
    N100 -> HN1
    N120 -> HN2
    I try to use form personalization on when-validate-record of line block, but never updated.
    If i prompt the message, it will display the updated value but after that it will display the old value again.
    I shifting the code to workflow at the time its booked and its working. But problem is, the user can still change the subinv after booked which is outside the workflow already.
    Appreciate if anyone can have solution for this.
    TIA,
    Fendy

    For defaulting fields on sales orders, instead of personalizations or workflow changes,check if you can use Oracle's defaulting rule functionality. It is meant for such requirements. It is much more powerful and kicks in every time order is created (either from screen or via order import).
    OM Superuser > setups > rules > defaulting rules
    Look at JohnnyP's post in Selecting the Subinventory for orders shipped from the LAO warehouse for details on how to do that.
    Hope this helps,
    Sandeep Gandhi

  • To change shipping address in sales order

    Hi experts,
    I have an issue here. I tried to change shipping address in an existing sale order. However, even tough I have changed and updated the shipping address in Business partner Master data. and the sale order itself, SAP still prints the old address for the shipping.
    It is possible to change? or it is one of the control by SAP?
    Thanks in advance!
    Phil

    Hi Phil,
    Is this Sales Order generated through Quote?
    Thanks,
    Gordon

  • What purpose of ship-to in sale order line?

    Hi Anyone,
    Do you have any idea about the 'ship-to name' using in sale order? If I defined each item with different 'ship-to name', the delivery still will pick all the item from sale order.
    Any explanation there?

    Hello Kok,
    I am sure the multiple ship to code features in SBO is to make the customer can delivery the items more than one address but using one sales order. SO, all you have to do is to develop report that filter ship to code. I used standard report but it only displays default ship to code address.
    There is no effect although you have defined more than one ship to code. The default is always set in the logistic tab but in the row line, you could define other ship to code if you want the item delivered to different shipping address. You just also add ship-to-code field in the report (PLD), but in the header is still default ship-to-code.
    Rgds,

  • Shipping type in Sales Order

    Dear Experts,
    I need to apply a validation at the time of sales order creation, if the user selects the shipping type that does not have any condition records maintained in VK13 then I need to display error message and shall not allow sales order creation.
    Thanks

    If the solution of Phanikumar is not working, you an always add the check in userexit_save_document_prepare (MV45AFZZ). You have to check if the subtotal of the new lines is empty or not.
    Ex.:
    LOOP AT xvbap.
    CHECK  xvbap-kzwi1 = '0.00'.
    Naturally you must assign the freight condition to kzwi1 (or 2, 3, 4, 5, 6) in calculation scheme.
    Gr.
    J.

  • How we increase Shipping tolerence in Sale Order

    Hi,
    If I want to to increase Sale Order quantity for Despatch, So what will we have to do for this.
    Because normally we always despatch more than we enter in sale order.
    So what solution.
    Regards

    Hello,
    In order management/shipping you can not issue greater quantity then you have in Sales Order. You have to create new sales order or put greater quantity then customer order.
    Regards,
    Luko

  • Your Ref ship number in Sales order Header

    Hi all,
    I have a requirement to update Your Reference Ship number in Purchase order data Tab of CRM sales order(Header) with a number coming from an RFC destination.
    I am using  BADI ORDER_SAVE Method CHANGE_BEFORE_UPDATE to do the processing of RFC destination.I have used FM 'CRM_SALES_PUT_OB' to put the number in buffer but still its not updating the database table CRMD_SALES with number.
    Is there any FMs to update the same??
    Thanks,
    Srilatha

    Hi ,
    Try CRMXIF_ORDER_SAVE .
    Please tell if it works .
    Ajith

Maybe you are looking for