Shipping point in STO
Hi sap guru
In stock transfer (ME21N) from one plant to another plant in a same company, iam getting a message shipping point XXXX is not allowed for the combination of shipping condition 01, loading group 0001 and plant xxxx.
I had maintained the above combination of shipping condition, loading group and plant assigned to shipping point(xxxx) in shipping point determination.
What might be the missing link?
Thanks in advance
Vijay
Hi,
Check your cuctomer master for shipping conditions and material master for loading group. check wether you have maintained these(shipping con and loading group) accordingly to the plant in the shipping point determination.
with regards
prasad
Similar Messages
-
KE24 no shipping point for STO(Stock Transport Order)
Dear All:
When I run KE24(account based), I found some of the data without "shipping point" value. Most of these records are from STO orders.
May I ask if there is any solution for this issue?
Thanks and Best Regards,
HarrisonHi, This situation in ONLYfor STO orders.
For other orders, it is normal.
Therefore, I do NOT think this is because COPA fields are NOT maintained.
Thanks for your reply
Harrison -
Shipping point in STO defined upon storage location
Hello, all
On stock transport order I want to set up shipping point in a way that it is determined regarding to storage location I have entered in header of STO.
Storage location is saved in field EKKO-ZZLGORT (tab Customer data). Now I need solution how to determine or overwrite shipping point when entering items.
For example:
. if storage location is 100, shipping point should be AAAA
. if storage location is 200, shipping point should be BBBB
I know that shipping point is determined according to combination of Plant-Shipping conditions-Loading group. And it works this way now.
Is it possible to do this via customizing ? If user-exit is needed please specify which and what must be modified. I'm not a programmer but I know business process. Will get help of programmer if needed.
I'm looking for this solution because I want to prevent that VL10b puts Stock transport orders with different storage location in header on same delivery.
Thanx in advance,
RJHi,
You should be able to use METHOD if_ex_me_process_po_cust~process_item to change the shipping point. We've created a customer table in which we've set the corresponding plant, SLOC and shipping point combination which is read during execution of the BADI.
You can also use METHOD if_ex_le_shp_delivery_proc~save_document_prepare for changing the shipping point in the delivery.
We've used above for return items. We're on 6.0 as well and for all non return items, standard customizing is available, but not for returns.
Hope this helps.
MdZ -
How to assign shipping point for STO
Hi experts
for STO, PO=>Delivery
When creating PO, enter material master then press enter, client want to proposal shipping point automatically
for example, when create PO, enter material master, if the material master MRP2 view storage location is 1130, then proposal shipping point 7000 after press enter
Is SAP stardard function can do this?Hi,
If your configuration is proper in IMG, then shipping tab will reflect in P.O
And for your speciefict requirement activate shipping point determination on the basis of storage location
IMG >> Materials Mang. >> Purchasing >> Purchase order >> Set up stock transport order >> set up stock transport between storage location >> set up storage location dependend shipping point determination
Here u can carry 2 activities
In this define rule as Strorage location speciefic shiping point detemination for delivery type
and next step assign shipping point according to storage location
kapil -
Change Shipping Point in STO in Transaction code ME27 / ME22
Hi Experts,
I want to change Shipping point in Transaction ME27 Is it possible i want to change default shipping point with manual shipping point ?
Is it possible ?
Please help...
Thanks & Regards,
TomThanks for your reply
I have configured multiple shipping point in same plant
shipping condition - Loading group - Plant - Prop Ship Point - Manual shipping point
03 - 006 - xx - x - y
In me22 - Item shipping data i am not able to change prop shipping point with manual
Please help me to solve this problem
Thanks & Regards,
TOM
Edited by: tomsoulsurfer on May 18, 2009 1:37 PM
Edited by: tomsoulsurfer on May 18, 2009 1:38 PM -
Shipping point in STO PO and RTV PO want to make mandatory
Hello,
For Stock Transport purchase order of UB document type and Returns purchase order i what to make shipping mandatory.
I have tried in field setting, however there is no such option to set.
if you know any way to set the shipping mandatory please let me know
Thank you
BhimaSPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level
Here in UBF make it required entry.
Sachin -
In STO Process How can i Change the shipping point manually
Hi,
I need clarification in STO process, shipping point determined automatically based on ovl2 setting like Shipping condition from customer master loading group from material master plant in the line item.(here the shipping point is1000.)
In my scenario it picking correctly shipping point(1000) even i have maintained manually shipping point(1200) in ovl2 but when i am creating STO document UB change shipping point at item level in shipping tab system allowing the manual shipping point (1200) but when i enter or save the document system overwrite 1200 to 1000,system consider only automatic determination in shipping point (1000)
Can you please help why i am not able to change the manually shipping point 1200( even i maintained in ovl2 manually shipping point 1200)Sending a calendar to another country is not supported in many jurisdictions - as it can lead to extra charges for the receiver. As I have no idea what country you are in you can select your country from this list
http://store.apple.com/us/help/print_products/routing
And find out if it's supported in your country and to your chosen destination.
Regards
TD -
Need to understand how shipping point will get determin in the STO.
Hi MM Gurus,
Please let me know how shipping point will get determin in the STO, and other shipping tab details like shipping condition loading group get determine in the STO.
Thanks and Regards,
SHARAN.Hi ,
At first the customer no is picked from the receiving plant in Define Shipping data from plant.
In the customer data, against the sales area you get the shipping condition.
The following path gives u the shipping point:
Logistics Execution>Shipping>Shipping Point and Goods Receiving Point Determination-->Assign Shipping Points
Loading grp , Trans.Grp will be taken from Material Master.
Regards
Ramesh Ch -
Set Shipping Point as mandatory field in STO
Dear Expert,
I am trying to set shipping tab -> shipping point as mandatory field in STO, I went to SPRO->MM->Purchasing ->PO->Define screen layout at Document Level but were unable to find the field selection group that has the field.
Does anyone knows whether the shipping point can be set as mandatory field?
Thank you in advance for any assistance.
Take care,
Andreaand also
Spro>Logistics Execution>Shipping>Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Set Up Storage-Location-Dependent Shipping Point Determination>Define Rule for Determination of Shipping Point
Spro>Logistics Execution>Shipping>Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Set Up Storage-Location-Dependent Shipping Point Determination>Assign Shipping Points According to Storage Location
Spro>Logistics Execution>Shipping>Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Set Up Storage-Location-Dependent Shipping Point Determination>Assign Shipping Points
So, that the Shipping point will determined Automatically.. -
Dear all,
I have defined shipping point. But when i want to assign same to plant , i am unable to do that due to non- availiaility of my pant in list while i have already defined this plant. What may be the reason?
For STO-MM , i referred to a thread and found that following steps are needed. me21n/vl10b/vl02n/migo. Is this right?
Regards,Hi Rohit, Seems that some config is missing in the sales area. From my point of view it's not depending on a plant reference. Up to my best knowledge unless the plant is not linked to the sales organization the shipping point will not appear to be selected in the plant configuration. So please check the plant assignment to the sales org. in the enterprise structure. The following steps have to be followed in order to configure stock transport order between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group.
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data creation. -
STO with field Shipping point grayed, how to open it ?
Dear friends ,
Does anyone knows how to open the field "Shipping point" in the Stock Transport Order (STO) ?
When I'm creating one STO via ME21N this field come grayed and we need to set as modifiable.
best regards,
Alefrom OSS Note 498143 - FAQ: Stock transfer with delivery in purchasing
Why is it not possible to change the shipping data in the purchase order?
Answer:
This function was implemented in Release R/3 Enterprise for EnjoySAP transactions ME21N/ME22N and was not provided prior to this. The following fields from the delivery data are also grouped together: VSBED,VSTEL,LFART,ROUTE, and LPRIO. This means you can only protect all of these fields or change all of these fields together. It can be implemented in a customer system Release 4.6B/4.6C as part of remote consulting, see also Note 769579.
Alternatively, you can define the shipping data by modifying the standard release; for more information, see Note 303453. -
Creation of unloading points for STO's
Dear Gurus,
I have been requested to create unloading points (ABLAD) to be used in STO's.
Can someone of you tell me what they are and where to create them?
Thanks in advance!
FHi,
Unloading point are comming under logistices execution -->shipping area.
This in Material master -->sales general data view. you can find the unloading point.
This function using when you make shipping against the STO through VL10B.
SAM -
Shipping in shipping point from plant and storage location is not possible
Dear Experts,
i am trying to configure STO with delivery scenario in my company
after creating PO (sto UB) and delivery through vl10b when i try to do picking in vl02n and when i enter storage location its giving error
"shipping in shipping pointxx from plant xxxxand storage location xxxx is not possible"
i ve checked all settings
1.plant and sh point assignment
2. ovl2 sh point determination
3.ovl3 picking location determination
4 all master data cust n mat for loading group and shipping cond
not able to find any solutions plz help
Regards
SupriyaCheck your entries in following options in SPRO path:
IMG - MM - Purchasing - Purchase Order - Set Up Stock Transport Order - Setup Stock Transfer b/w Storage Location - Setup Storage-Location-Specific Shipping Point Determination
Option 1: Define Rule for Determination of Shipping Point
Option 2: Assign Shipping Points According to Storage Location (this should be there, if in Option 1 Determin. Rule; Shipping Point is L: Storage-Location-Specific Shipping Point )
Regards
JP -
hi guru's
i have got hte error of"not possible to determine the shipping data for the material xxxx" while creating the stock transport order. ihave checked settings for stock transport order, material master data. please suggestHi,
For doing STO i hope u have maintained all settings in OMGN
also check following things
1)Sales View is maintened for Material in both plant
2) Loading group is maintained for that material in the sales org/ Gen Plant view
3) Material is extended in both plant
4) Receiving plant is created as vendor ( also check in XK02 general data--control customer number is mentioned )
Please ensure this configuration has been done in shipping point determination.
SPRO-> Logistics Execution-> Shipping-> Basic Shipping Functions-> Shipping Point and Goods Receiving Point Determination-> Assign Shipping Points
Here you need to assign the Shipping condition to the loading group assigned in the Material master to the Plant Combination with Primary shipping point
Regards. -
Multiple Picking location for a Shipping point
Hi,
Is it possible to assign mutiple picking location against a shipping point in one plant.
Currently we can assign only one storage location as picking location against a shipping point in the below bath
SPRO->LE->Shipping->Picking->Determine picking location->Assign picking location
I have mutiple storage location for a single shipping point. I want system to check any one of the storage location while creating delivery for that particular shipping point.
Eg:
Plant P1 have storage locations S1,S2,S3,S4 & shipping Point SH1,SH2.
System has to determine picking location as S1 or S2 for shippint point SH1.
Is it possible to control this by any userexit or anyother way?
This has to be applicable for STO/PO also.
ThanksHello,
there is user-exit:
"Determinations in the Delivery
You can use the following enhancements to control determination of the organizational units that control the picking or putaway process of deliveries:
Enhancement Function influenced
V02V0002 Storage location determination
V02V0003 Gate and staging zone determination (Header)
V02V0004 Staging zone determination (item)"
SPRO: Logistics Execution>Shipping>System Modifications-->Previous User Exits in Shipping
Line: -
You can also use Business Add-In for Delivery Processing:
Business Add-In for Delivery Processing
Use
Application component: LE-SHP-DL
You can use the Business Add-In LE_SHP_DELIVERY_PROC to influence processing of delivery data, during creation and changing of deliveries at specific points described in the interface. The BAdI methods enable you to read, write, determine, delete, and save your own delivery-related data, and to change the standard delivery data.
SPRO: Logistics Execution>Shipping>System Modifications-->Business Add-Ins in Shipping
-->Business Add-In for Delivery Processing
Andrzej
Maybe you are looking for
-
Mini Display Port Not Working, WHY?
When I first got my MacPro I tried to display two monitors and couldn't as the Mac didn't detect anything fed from the Mini Display Port. When connecting Either my BenQ M2700HD, BenQ FP222W or My Wacom Cintiq 12wx to the MAC via the Mini Display Port
-
Hi i have a powermac g4 (dual 1ghz) with a Nvidia GeForce FX6200, can some one tell me if i am able to upgrade to motion 3 without getting a new machine. thanks Sim
-
Script for mulipage contact sheet?
Don't know if this belongs here or in Photoshop forum since it invloves a Photoshop feature called by Bridge -- but since Bridge is where I typically use it... Currently I'm creating contact sheets from folders selected within Bridge (or thumbnails s
-
I am very disappointed with this product which i purchased about 10 days ago. How can a company like Sony spend so much on advertising a poor product. Have got it replaced once but still it's camera quality is way below the mark. I was using Samsung
-
GETTING AN ERROR -GROUP FUNCTIO NOT ALLOWED HERE
SELECT user_id, packageid, DECODE (bstplantype, 0, ( CEIL ( SUM (duration_seconds) ------GROUP FUNCTION OT ALLOWED HERE / ( DECODE (ispeak, 0, offpeakpulse, peakpulse * convert_duration (ratingunit, pulseunit) * DECODE (ispeak, 0, offpeakpulse, peakp