Shipping point - no values in matchcode at Sales order item level
Hello, i have created a shipping point. however when i create the sales order i do not get any values in the matchcode.
When i click on the matchcode for shipping point, i get ' no possible values exist for this field'
when i compare the material i am currently using vs one already created in mm03 -> Sales: General/Plant Data
in one screen i have
Trans. Grp 0001 On pallets LoadingGrp ZDRG Crane
Setup time 0.00 Proc. time 0.00 Base qty 0 ST
in the other i only have
Setup time 0.00 Proc. time 0.00 Base qty 0 ST
the transport groups , loading groups are missing.
Similar Messages
-
Update Purchase order number in Sales order item level from inbound ORDCHG iDoc
Hi Gurus,
I want to update purchase order number from the iDoc 'ORDCHG' to sales order item level (sold to party purchase order number) i.e, VBAK-BSTKD.
Which exit I need to use? where to update? Can you please help.
Thank you in advance.
Regards,
SanFinally Resolved the problem by writing 2 exits.
one exit 'EXIT_SAPLVEDB_007' for identify correct item in the sales order by updating the customer purchase order item number i.e., VBAP-POSEX. if we update the POSEX field then it wont create new item instead, it will update the item which it is referring to .
2nd exit for updating the purchase order number.
I have tried to pass the program name, screen number, field name, field value etc to bdcdata in the exit 'EXIT_SAPLVEDB_002'. but I observed that it is not going to that screen in the debugging.
when I try E1EDP02 with QUALF '044' it will update ship-to party's purchase order number. so to update ship-to party's purchase order number it is going to that screen.
so I have used that thing to update purchase order number in sold-to party's purchase order number.
so when it is going that screen iam changing the field name 'VBKD-BSTKD_E' to 'VBKD-BSTKD' in bdcdata. Then it is worked.
This is the solution I found in my time.
Any way it is solved. Hope it will be helpful for others who will get this problem. -
Changing address in sales order item level
Dear very good mng
i want to know , i am trying to change ship to party address in sales order line item level
but showing Gray mode only .. i have maintained Sales document item level ( partners) Removed check box not modifiable
And i activated Item partners check box at partner tab
even i am not able to change address in sales order item level plz tell me
Thanks a lotHi Madhuri
I have checked my self.system does allow to change different ship to Party on line Item level .
Please do the following steps .
1. Replace/delete the WE partner Number ( Example -1) in my case in change mode.
2. system will show some error message as show below while deleting or replacing WE with some other ship to Party code.
3. Ignore the message and go ahead . Please put the new Partner's number and double click
address Screen will Pop up . You can Change the address .
Hope this helps .Let me know for more clarification needed .
Regards
Santosh Verma -
Incompletion procedure -Sales order Item level.
Hi
I want to add the field "MATERIAL SALES TEXT" in Incompletion procedure -Sales order Item level.
The Table that i need to enter in procedure is VBAP.
But what should be the "Field Name" and Screen for creating missing data?
Plz Help....
Regards
SubhasishField ARKTX refers to 'Description' of material in sales order and not to 'material item text'.
'Material sales text' flows into sales order from the text you maintained in customer master record or Material master record.
Of course, you could also maintain sales text at sales order stage also.
Incompletion process inspects specific fields in order to see if data has been maintained in these fields. Should data not be maintained in these specified fields, the system is told how to respond, that is, whether or not to give a warning message and to what extent does it allow further processing of the document.
Material sales text is not a field.
So, you cannot add material sales text at incompletion procedure.
Please reward points for good answers as this would help increase the total donation that SAP will make to the United Nations World Food Programme. -
REASON OF REJECTION AT SALES ORDER ITEM LEVEL
In sales order item level after putting reason of rejection wether net value of sales order changed to ZERO Value?
In Sales infromation system for that particular customer & material sales order value reflects in report?
Kindly send your comments on it.
regards,
N.M.PAWARHi
Suppose a sales order has 2 line items say material 1 and qty is five units and each is Rs 100 and material 2 and qty is Three unitsand each is Rs 100
Then the nett value of the sales order is Rs 800
If you reject material 2 and qty is Three units then after that whether order value changes to Rs 500 or remains at Rs 800 depends on your SPRO settings
In t code OVAG against your reason of rejection if you maintain blank in the statistical column system keeps the price as Rs 800 even after rejecting it the sales order but while billing it will be billed for Rs 500 only
If you maintain X/Y in the statistical column system changes the price as Rs 500 after assigning the reason of rejection and then enter
The difference between X and Y is
tomorrow if the top management wants a report that how much value loss has come thro reason of rejection such report is not available with X (if you maintain X) and with Y you can take such reports because X doesnt updates the information structures but Y does update information structures
Regards
Raja -
Sales Order Item level Configuration data
I need sales order item level configuration data. I use following function modules to get, But my issue some of configuration DON"T have value only description available. I needs configuration with values or without values ( menas all)
But function modules not giving complete results.
CE_I_GET_CONFIGURATION
VC_I_GET_CONFIGURATION_IBASE
VC_I_GET_CONFIGURATION
CUD0_GET_VAL_FROM_INSTANCE
Any info ?
a®Tried could not find why the function moudle not considering entries don't have values
But in sales order config screen if i press page (list) its showing values that don't have values
a® -
Sale Order Item Level Text Field which table and field
Hi,
Thanks for your prompt reply and best solution.
Can you please tell me one more thing, in sale order at item level the TEXT Field maintaining by user at transaction level now they want that field in one of the report, so can you please tell what is the table and field where i will get this sale order item level text details.Hello,
is this going to work for item level text as well.
can you tell how to proceed with this functional module
or is there any other thing required.Please elaborate to
understand better way.
You can check out two table in respect to Sales TEXT i.e. STXH (STXD SAPscript text file header) and STXL(SAPscript text file lines).
The best approach of tracing out the Text in respect to Sales Order would be to use the Function module READ_TEXT and put this FM in SE37 and execute with the following parameter.
Client
Text ID of text to be read
Language of text to be read
Name of text to be read
Object of text to be read
Archive handle
Text catalog local
When you are essentially looking to read item level Text with respect to Sales Order then your Text OBject would be VBBP.
Regards,
Sarthak -
Mandatory partner function at sales order item level
Hi all,
I'm customizing partner schema at item level for sales order. I have created a custom partner function, I put it in a new sales order item partner procedure and i set this partner function as mandatory (I want that system show me a message if this function is missing at item level in sales order). This partner function is defined only at sales order item level (not at header level or customer master).
If i create and save a sales order with an item type that use the item partner procedure I have created, system don't show me any message for the item custom partner function missing, else if it is set as mandatory in sales order item partner procedure.
I have read some posts in these forums about this functionality, but it seems a different situation.
Someone had a similar type of problem?
Thank you in advance for any possible suggestion.
Regards
GianpaoloHi,
First you have to create a new partner function.
Then assign that partner function to the account group.
Then assign that partner function to partner determination procedure for the item category.
Over here click on the mandatory button also.
Then assign that partner determination procedure to item category.
Then to XD02 and give your customer number and in the partner tab maintain the data for that partner function.
Now go to VA01 and create your sales order you will see you partner function.
If you wont have maintained it in the customer master then it will prompt an error.
Regards
Raj. -
Sales order costing - tracking of actual costs at sales order item level
Hi
We are going with sales order costing for services
Service material is non-valuated hence the scenario is non-valuated sales order stock
PP module is not implemented.
I am having following questions
1. How to track the actual costs at sales order item level? Is Internal order/CO production order is required to be created for the same?
2. Can I do activity confirmations directly from cost center to sales order item.
3. Can Raw material is issued directly against sales order item.
4. Is Sales order is a real or statistical account assignment object?dear friend,
please look here:
http://help.sap.com/saphelp_47x200/helpdata/EN/42/d7248ab27111d19e9a080009b0db33/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/90/ba6cfb446711d189420000e829fbbd/frameset.htm
reagrds, -
How to change material discription at sales order item level ?
Dear Gurus,
We have some requirement need to change material description at sales order item level , but in system it is in disable mode how to change that into change mode in sales order item level?
Thanks in advance
Regards
VenkatNot possible in SAP Standard.
Instead why not create a Customer Material Info Record in T-Code - VD51?
Alternatively it the requirement to change the Description is only for few Sales Order then create a Text ID & Enter the Description in Text Feild. Then in Smartform program wrie a code which will check for Material Description in the Text first & if not found then take from normal material Description in Sales Order.
But Customer Material info Record seems to be the best solution.
Hope this helps,
Thanks,
Jignesh Mehta -
How to add three fields in Sales order item level and supress/hide many
Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
SrikanthHi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth -
Collect funding at sales order item level
Hi all,
Is there a FM or BAPI that will allow me to feed in a WBS element to retrieve a list of all sales orders and associated line items. I have a need to sum the funding at the sales order item level.
Thanks,
MatHi,
Perhaps you can read directly from table VBBE to get all sales order and item based on WBS element (PSPEL).
Regards,
Ferry Lianto -
Split at sales order item level
Hi SD gurus...
Iam trying batch determination at sales order item.
I could get every thing except batch split/ Even though required split are maintained in batch search record, it is getting as 001 only at the time of determination during sales order.
I think this is a standard phenomena. is there any work arround possible to get the required batch split at sales order item level.
warm regards
sairam akundiHi Sairam,
Contrary to deliveries, batch splits are not possible for sales orders (as opposed to delivery). Even if you have defined a certain number of batch splits in the batch search strategy, the system overrides this default setting.
Maybe you can explore USEREXIT_MOVE_FIELD_TO_KOMPH -
In sales order item level billing tab
in sales order item level billing tab you have nine fields for payment terms
i want to know from where is the payment terms coming in the fields , i have checked that whatever payment term is there in SP/SH/PY they are not getting updated in the nine fields
can anyone tell wat is the possible ways to fill these tabsHi,
Payment terms are coming from Customer Master on Sales order , I did checked by removing the payment terms from customer master and created the sales order were it has not defaulted. Updated the Customer Master with Payment Terms and created the sales order now Payment terms got defaulted.
Regards
Raj -
FM for Updating Installation date in Contracts + sales orders Item level
Hi
Plesae give any FM for Updating Installation date in Contracts + sales orders Item level for contracts tab.
Thanks and Regards,
Vishnuvardhan....Have used the billing transaction to set a Default Billing date at time of blling.
Maybe you are looking for
-
JDBC Sender Adapter - Records sent one at a time
Hello everyone, Here's a summary of my scenario JDBC > XI > RFC. My select statement (JDBC) looks like this: SELECT * FROM BATCH WHERE STATUS='Y' The problem is, whenever it returns multiple rows, the RFC can only accept one record at a time (1...1),
-
Weird Error Message - Transaction Terminated....
Hi I am running one job at the background and it has failed twice since morning giving this error message in system job log....I cant make out anything out of this any clues??? 07:51:16 prd0ap02_P01_79 BTC 4 100 ZB_JB F6F TemSe obje
-
HT204266 How can I find the top 300 games in each category on iPad App Store?
From iPhone Apps Store I could go to each category and find the top 300 games, how could I find the top iPad games in each category in iPad Apps Store? Thanks!
-
Iexplore.exe - Application error (0x0eedfade) Runtime error 217
I have had error messages appear on my screen as I begin to shut it down. The first says: Iexplore.exe -Application error (0x0eedfade) 0x7c812a5b and the second says: Runtime error 217 at 0473F48E What do they mean? Yesterday my notebook shut down in
-
I am always getting the message ' could not complete due to program error" Why does this happen
I am always getting the message ' could not complete due to program error" Why does this happen