Shipping point ZHYD is still assigned to a picking

HI Experts,
I have created ZHYD shipping point through copy from 1000 shipping point. Now i am going to assignment but the shipping point ZHYD is assigned all plantsu2019 am trying to delete all plants except ZHYD.but system showing fallowing error message,
Shipping point ZHYD is still assigned to a picking
Please advice how can i over write this problem.
Thanks in advance,
Chandhu

Hi,
Refer Error in deleting shipping point assigned to plant
regards

Similar Messages

Assign multiple shipping points to multiple tranportation zones?

Hi All,
I have a requirement according to which more than one shipping point is to be assigned to more than one transportation zone(destination zones). I dont see that option in the spro screen. can anyone tell me how can this be done?
Thanks & Regards/Aryan

Hi Aryan,
A shipping point has one departure zone in its location data.
It doesn't need to be assigned to destination zone. Check out: IMG -> SD -> BF -> Routes -> Route determination->Maintain Country And Transportation Zone For Shipping Points
If you have interest in Route determination, the route is proposed in order per config:
departure Zone(from shipping point) + destination zone(CMR) + transportation group (MMR) + shipping condition
What one needs to do is to build links between DepZones and DestZones according to customer needs and services of shipping agencies, then shipping points located in that Departure Zones can deliver goods to specified destinations. Hope that's what is asked.
Regards

Missing shipping point while saving sales order

hi all,
friends i am creating a sales order(VA01). when i use incompletion log. it shows shipping point is missing . when i go to fill shipping point , it shows no any data. i have checked customer and material,and also done shipping point determination . But it still shows shipping point missing in sales order .
so plz help me to solve this problem .
regards

First a plant should be determined in the sales order.for the plant to be determined in the sales order you shoud maintain aplant in the customer master or material master or in the customer material information record.
2nd thing is you must do shipping point determination in logistics execution under shipping assign shipping point,receiving point determination.for that shipping point is assigned to plant ,loading group,and shipping condions and the shipping point you want to assign. If you these two things then the shipping p[oint wiil be determined in the sales order.
Regards
Biju

Shipping point was not determine in the order with material determination.

Hi,
I´m using material determination for my sales order, and i need to determine the Shipping point with storage location configuration. So when I add the material number, the quantity and the storage location the material determination runs and in the second line determined the shipping point it is not filled. Any body knows how can I fix this problem?
Best Regards

Hi
The shipping point will be determined on the basis of shipping condition, loading group and the delivering plant.
The storage location dependent shipping point determination is used only in delivery documents and not in sales orders (Assign Shipping Points According to Storage Location).
To activate this you must first Define Rule for Determination of Shipping Point, wherein you can assign the rule to the delivery document only and not to the sales order.
If you say that you are getting the shipping point determined based on the number of the material, the quantity and the storage location entered(though it is not) then here note that you are entering the storage location only to the material entered and not to the material determined. When the system determine the alternate material then the shipping point will be determined on the basis of shipping condition, loading group and the delivering plant as per SAP standard process.
Try by entering the storage location to the material determined and check whether you can get the shipping point or not and let the forum know the result.
Hope this helps you.
Regards
Rajkumar K

Pick Pack time in shipping point.

Hi Gurus,
I would like to have a clear understanding on the Pick Pack time / Loading time in Shipping point Configuration.
1. I have configured shipping point with factory calendar assigned to it.
2. I have given the pick pack time in the shipping point config.
Now the question is, i'm able to give fraction values also here , say 2.5 days for pick pack time,.
what does this mean? how do i infer.
Please provide clarity.
I do not want details on how the dates are determined in Sale order w.r.t to this details, instead more clarity on how days will be taken if fractional values are given in days and not in hours.
Regards,
Basha.

System will consider decimal based on factory calender and work times fields
If work times are defined, lead times can be set in hours/minutes and applied to the work times.
The following priorities are used for scheduling:
Factory calendar and work times maintained
The lead times are used in hours / minutes work time. Here, both the work days defined in the calendar as well as the work times on the individual weekdays (Monday through Sunday) are taken into consideration.
Additionally maintained lead times in calendar days are possibly not taken into consideration if the lead times are not maintained in hours/minutes. The work time would then be zero from the schedulung view.
Factory calendar maintained
The work times in calendar days are used and the workdays defined in the calendar are included. From the scheduling view, each day has 24 hours (in contrast to the lead time in hours/minutes where the work times are taken into consideration).
Additionally maintained lead times in hours/minutes are possibly not taken into consideration if the lead times in calendar days are not maintained. The work time would then be zero from the scheduling view.
No factory calendar maintained
As above, the system calculates only using calendar days, and work-free days, such as weekends or public holidays, are not taken into consideration
Thanks
Chidambaram

Shipping point and plant

Hi experts,
In VL01N, the system pops up the message below when entering storage location, picked qty & batch. Pls help to solve. Thx.
"Shipping from shipping point 2000 and plant 1001 is not possible. Message no. VL027".
Acutally, shipping point 2000 has been assigned to plant 1001 in OVXC. In shipping point determination, shipping condition 20 - loading group 1000 - plant 1001 - proposed shipping point 2000 has been maintained. Shipping condition & shipping point between the sales order & delivery match.

Hi Cathy
Please make sure that your plant 1001 and shipping point 2000 is assigned properly
Then your OVL2 shipping point determination settings
As you are getting this error while entering the storage location
That means your OVL3 is not maintained properly
OVL3 is storage location determination settings
It is determined thro
1.Shipping point
2.Delivering plant
3.Storage conditions from MMR (optional)
In t code OVL3 maintain for Shipping point 2001 and Delivering plant 1000 and storage conditions of material maintained in MMR (plant data/storage location data 1 ) or you can keep this as blank also
For this combination maintain your storage location the key which you are manually entering in VL01N
Regards
Raja

No possible entries exist for this field for Shipping Point

Hi gurus,
I require the Shipping Point to be automatically determined in the Sales Order. Except this is not happening, I then attempt to manually select a Shipping Point in the line item of the Sales Order and receive the following error (in green)
"No possible entries exist for this field"
The Material Master has the Loading Group assigned.
The Sales Order Type has the Shipping Condition assigned (so does the Customer)
The Plant is assigned to the Customers (no CMIR created)
The combination of the three are entered in the 'Shipping Points Determination" table in SPRO with a Proposed Shipping Point AND a Manual Shipping Point.
Except I can not choose either of them as a Shipping Point in a Sales Order.
Anyone have the knowledge to understand why I can not select a Shipping Point?
Thanks

Shipping Point Determination
Shipping points are independent organizational units that are linked to a plant and represent the point of departure or receipt of materials.
Check if shipping point is defined and assigned to plant or not by going to:
IMGEnterprise structureMaintain structureAssignmentLogistics executionAssign shipping point to plant
IMGSDShippingBasic shipping fncsShipping point determination.
The shipping point is determined based on the shipping conditions, which are either entered manually in the sales order or are copied from the customer master record (shipping screen 01=as soon as possible, 02=standard, 03=collective processing). The shipping point is also determined by the loading group (0001=crane, 0002=forklift, 0003=manual), which is copied from the material master record, and the delivering plant of the line item in the sales order.
Regards,
Rajesh Banka

Sales order change allows shipping point | plant combination - not possible

A sales order was created and all lines defaulted to the correct shipping point for the plants.
Subsequently, one line's shipping point was changed to a shipping point not possible for the plant, i.e, no assignment exists for the shipping point and plant. There were no checks to validate the change. Thus, the sales order was saved with the bad shipping point for the plant (non-WM).
The delivery was created with two lines for plant (WM) and one line for plant (non-WM).
The solution was to manually delete the non-WM plant line from the delivery and. Next, correct the plant (non-WM) to the WM managed plant and create a new delivery.
Why did SAP allow the order to save with bad shipping point - plant combination.
Thank you in advance for your assistance.
lotjjon

Why did SAP allow the order to save with bad shipping point - plant combination
Definitely, standard SAP won't allow you to change the shipping point unless, it is assigned in OVL2 as already pointed out. Check whether this issue is there for all plants / shippint points or only in that document, this issue has happened.
G. Lakshmipathi

Shipping Point Restriction in VL10C Transaction

Hi,
We have given access to vl10c to users. We want the users to run only specific to their shipping point.
As per the Requirement ,
In Auth Object V_LIKP_VST we have restricted the Shipping Point. But still it does not restrict and shows the output to ther shipping points too.
In su24 , i have checked and it shows it checks for this V_LIKP_VST Auth object.
But it is not really checking.
Thanks,
Tanuj

Hi,
We have given access to vl10c to users. We want the users to run only specific to their shipping point.
As per the Requirement ,
In Auth Object V_LIKP_VST we have restricted the Shipping Point. But still it does not restrict and shows the output to ther shipping points too.
In su24 , i have checked and it shows it checks for this V_LIKP_VST Auth object.
But it is not really checking.
Thanks,
Tanuj

In STO Process How can i Change the shipping point manually

Hi,
I need clarification in STO process, shipping point determined automatically based on ovl2 setting like Shipping condition from customer master loading group from material master plant in the line item.(here the shipping point is1000.)
In my scenario it picking correctly shipping point(1000) even i have maintained manually shipping point(1200) in ovl2 but when i am creating STO document UB change shipping point at item level in shipping tab system allowing the manual shipping point (1200) but when i enter or save the document system overwrite 1200 to 1000,system consider only automatic determination in shipping point (1000)
Can you please help why i am not able to change the manually shipping point 1200( even i maintained in ovl2 manually shipping point 1200)

Sending a calendar to another country is not supported in many jurisdictions - as it can lead to extra charges for the receiver. As I have no idea what country you are in you can select your country from this list
http://store.apple.com/us/help/print_products/routing
And find out if it's supported in your country and to your chosen destination.
Regards
TD

Any enhancement to increase pick time, do not want new shipping point

Have 1 customer that requires a longer picking time, prefer not to create a new shipping point for a one off case.
Would perfer to write an enhancement so the material availability date is 5 days before goods issue date (5 days pick time) instead of our normal 1 day. A new ship point would work great with 5 days pick time but big change for users.
Thanks,

Hi Glenn,
SAP System considers the picking time maintained on the shipping point(OVXD) while giving the Material availability date. Picking date is same as material availability date by defualt. Then it will take picking time as 1day( If you have maintained picking time as 1 day on shipping point) and gives the loading date. you ask your abaper to hard code the material availability date (overwrite the praposed date by 4 days for particular customer) in "userexit_move_fields_vbep".Kindly please let me know If you need any more help.
Regards,
Ram Pedarla

Organisation structure - Shipping points

Hi,
We are about to implement SAP for one of our factories, and we are in business modeling stage.
Question: is there any general rule when mapping the needed number of shipping points in a plant, except for "geographical" (if the shipping points are located far away from each other in the warehouse)? Also, is there any way to use LE to minimize the number of shipping points needed? They all have the same factory calendar so there is no need to create multiple shipping points because of that.
The plant would need at least one shipping point for the purpose of shipping/receiving returns/inbound delivery.
Thanks,
Lars

Hi,
As you know Shipping point is also used in determination of Picking location.
In a plant there might be more than one storage location and some of them might be warehouse managed. In case if you are shipping the material from SLOC which is not warehouse managed and also from the SLOC which is warehouse managed; in that case better to have 2 shipping points.
So that in Sales document once you have Shipping Point1 then the SLOC is 0001 which is warehouse managed and when Shipping Point2 is used then the SLOC is 0002 which is not warehouse managed.

Assign Shipping Points to Plants: T-Code OVXC

Hi
In SPRO activity we need to assign shipping points to plants in Enterprise Structure using OVXC Transaction.
For a company that has over 100 plants is there a possibility of doing this assignment through LSMW ?
Regards
Siddharth Sridhar
SD Consultant

Hi,
You can always use an LSMW or BDC to move forward.
But I would advise you to do the configurations manually.
Direct table entry is possible, but not advisable, but you still have option for creating the transport request for the table entry to move to Quality for testing and then to production.
Reward points if it helps.
Regards,
Harsh

Assigning Printers to Specific Shipping Points

Hi,
Our system has multiple Sales Organisations, within each - one plant/warehouse/shipping point.
I have added additional plants to a few of these sales orgs, along with the relative warehouse and shipping point.
Sales users now have the option of selecting a plant when in a sales order - depending on stock availability at each. We successfully have multiple deliveries generating for differnt plants, under 1 sales order.
However:
I don't know how to assign a separate printer device to each shipping point/plant. The plants are separate warehouse locations therefore it needs to be automatic.
I've tried VP01SHP, however all 60 shipping points that alreeady existed showed the same data, there must be somewhere else that defines them to a separate device?
Any help greatly appreciated.
Dan

Go through this IMG path to find the settings about LD00 output type (as shipping point related data will be maintain in appl V2).
SPRO path
IMG - LE - Shipping - Basic Shipping Functions - Output Control - Output Determination - Maintain Output Determination for Outbound Deliveries - Maintain Output Types, here you can find the LD00 Output type.
For more settings go through this IMG steps
-Maintain Condition Tables, 21-DlvType/Shipping Point
-Maintain Output Types, LD00 (Std Access sequence 0005-SalesOrg/Customer), so, to modify create Z Output type by copying LD00 and .
-Maintain Access Sequences, try 0010-DlvType/Shipping Point
-Maintain Output Determination Procedure, V10000-Header Output
-Assign Output Determination Procedures
Hope this can assist you in understanding or refer [output determination|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=ERPLO&title=outputdeterminationusingconditiontechnique&decorator=printable] for the same.
Thanks & Regards
JP

Shipping point and plant assignment

Hi,
When i am maintaining enterprize structure in sd in assignment of organizational unit if i want to assign shipping point to the plant ,its not detecting plant untill i set up sales line(plant+sales organization/distribution channel) .what is the relation between sales line set up with shipping point to plant assingment? please clarify...
Regards
Supriya

Shipping point can ONLY be assigned to a delivering plant.
2. Plants can be "made" in to delivering plant by assigning Sales Org. , D channel to Plant.
Therefore after 2 you have the possibility to assign shipping point to the plant (which has been made a delivering plant)
PS - org unit plant is used in MM, PP and SD etc. but delivering plant is an important org unit for SD.
From a business process perspective - PP: Plant is a manufacturing unit, MM: Plant is a storage of material unit. But to deliver goods to customers, a delivering plant has to be created. Shipping point is the starting point (& the org unit that controls) of outbound deliveries. Thus shipping point is assigned to Delivering plant.
This is also logical from a business process perspective!
Edited by: Typewriter on Aug 19, 2011 3:08 PM

Shipping point ZHYD is still assigned to a picking

Similar Messages

Maybe you are looking for