Shitshitshit /dev/sda4 has errors?

First thing it does, Arch checks my filesystem (/dev/sda4) and it has errors...Filesystem check fails, and it tells put password to log in as root or Ctrl+D to continue...I really need this HD because it has tons of family pictures, etc. no backup (THIS WAS MY BAKCUP WHAT THE H)
Worrisome is that when I drop into root /home/*username* doesn't exist. And mounting the samba server also fails...Do I have to take out the HD and make it an external now? Is it really dead? Or could this be a mistake. This was a default Arch installation, I dunno what /dev/sda4 is...

I am not shure, but I think I once had the same problem. When the filesystem-checking daemon finds an error it stops and tells you that you have to fix it first. This could be happening because the filesystem was not properly unmounted before rebooting.
What you have to do is what ataraxia said before, but as I remember, when you enter the root password, if that drive is already mounted (which is the case of the root partition), you have to remount it read-only first. You can achieve this by typing:
mount -o remount,ro /dev/sda4
Then you can check the filesystem again with e2fsck as ataraxia said above. In the case you don't need to reboot Linux, you can remount the filesystem as read-write by typing:
mount -o remount,rw /dev/sda4
If it has errors, you probably will have to reboot, but maybe in the future, if you just want to check the filesystem for errors, this last command will be helpful.
Regards.

Similar Messages

Windows 2008 R2: SLES 11 Sp3 Guest converted from Vmware OVA to VHD, does not boot on Hyper-V: could not find /dev/sda4

Hi
I have a VMWare OVA file with Guest OS as SLES 11 Sp3. I have converted this file from OVA to VHD using Microsoft Virtual Machine Converter Solution accelerator. On first boot of this VHD on Windows Server 2008 R2 - Microsoft Hyper-V I get an error that
"Waiting for device /dev/sda4 to appear..
Cannot find /dev/sda4"
I have not even booted this VM once on Hyper-V, and hence not installed any Linux integration Services yet.
What could be the possible reason for this failure? Any suggested solution?
Thanks
Ashwini

Easiest way (and also applies to Hyper-V 2012 R2):
Ok, following properly (originally missed the step to mount the root directory of the converted VM as "/mnt" )
http://nwrickert2.wordpress.com/2011/10/24/rescuing-susie/
Then once chrooted
mkinitrd -d /dev/sda2
generated initrd from kdump WITH Hyper-V drivers & VM is usable!
http://forums.opensuse.org/showthread.php/476780-boot-failure-mkinitrd-does-not-understand-that-dev-sda-has-become-dev-sde
Can't believe that it was so painful to find the right info easily
Just to finish it off, after converted machine boots fine, there is a small
matter of removing tools & fixing networking as per links below:
https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.upgrade.doc%2FGUID-6F7BE33A-3B8A-4C57-9C35-656CE05BE22D.html
http://www.vcritical.com/2010/10/getting-eth0-back-in-a-sles-for-vmware-clone/
All done!!!
Also (unsupported), but works fine is SLES 11 SP1

SAP DEV migration process error

Hi all,
SAP DEV migration process error.Error Details:
Source system
SAP ECC6.0 SR2
DB: DB2.9.1.4
OS: AIX 5.3
Target system
SAP ECC6.0 SR2
DB: DB2.9.1.4
OS: SUSE 10 64 Bit
ERROR 2008-11-13 07:41:06
 CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/DEV/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 126. For details see log file(s) dipgntab.log.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-11-13 07:41:06 [iaxxgenimp.cpp:731]
 showDialog()
FCO-00011 The step adjustNametab with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_DB6|ind|ind|ind|ind|5|0|adjustNametab was executed with status ERROR .
TRACE [iaxxgenimp.cpp:719]
 showDialog()
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 2 > Additional Software Life-Cycle Tasks > System Copy > IBM DB2 for Linux, UNIX, and Windows > Target System > Central System > Based on AS ABAP and AS Java > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to /tmp/sapinst_instdir/ERP/LM/COPY/DB6/SYSTEM/CENTRAL/AS/.</body></html>
TRACE [iaxxgenimp.cpp:1155]
 showDialog()
waiting for an answer from gui
dipgntab.log
/usr/sap/DEV/SYS/exe/run/dipgntab: /usr/sap/DEV/SYS/exe/run/dipgntab: cannot execute binary file

Hi,
1. please check if /usr/sap/DEV/SYS/exe/run/dipgntab exists or not ?
2. Does it have executable permissions?
3. Does your user have authorization to execute it?
4. if you executed dipgntab manually, does it work ?
Regards,
Vincent

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Regarding datasource i'e., The OLTp source still has errors

Hi experts,
I was getting an error while creating datasource i.e, "The OLTP source still has errors".
Last 2 days onwards i was getting this error. Previously i have created many datasources.Eventhough i was gettign sam error
while doing any changes in existing datasource. Kindly help me out in this issue.
Regards,
Sree.

Anil,
I will explain in detail.
We want to do enhancement for datasources (transaction or Generic datasources...whatever it is).
LBWQ or RSA7 question will not come here...ok....
any time we can do enhancement by adding additional fields to the extract structure(appending..) of trans. or generic or masterdatasource.....
In my case, If i add some fields to the extract structure(appended str.)in source system(r/3- datasource-2lis_13_vditm) and save it. immediatly we are getting message saying that 'OLTP SOURCE ERROR'...
Is there any problems in source system/installation.
Thanks,
Mahantesh
similarly, the same problem will come for all the datasources - enhancment.
how do

BPM - Message has error on the outbound side

I get this error 'Message has error on the outbound side" . I am using IDOC - BPM - JDBC. I checked SXI_CACHE and I see ret code 99 for this Integration Process. I tried to activate it. I see an error saying that ZCUST_NUMBER is not a component object of PAYLOAD. I have this context object defined on the Abstract Message Interface built to store the IDOC.
Any ideas are helpful

Michael,
The program outputs a returncode = 99 during the cache refresh of an integration process (ccBPM), with an error message that says that 'xxxx' is not a component of the 'PAYLOAD' data object.
If you are getting the above error, check OSS NOte 890760

APEX 3.1.2: package body "FLOWS_030100.WWV_FLOW_UTILITIES" has errors

When installing apex 3.1.2 in Oracle RDBMS 9.2.0.8 Ii got the following errors:
command:
SQL> @apexins SYSAUX SYSAUX TEMP /i/
output:
APPLICATION 4411 - APEX - System Messages
Set Credentials...
Check Compatibility...
WWV_FLOW_API.FLOWS_API_LAST_EXTENDED20070906
WWV_FLOW_API.CURRENT_FLOWS_VERSION20070906
WWV_FLOW_API.IMPORT_COMPATIBLE_WITH_VERSION 20070108
WWV_FLOW_API.COMPATIBLE
Set Application ID...
begin
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "FLOWS_030100.WWV_FLOW_UTILITIES" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "FLOWS_030100.WWV_FLOW_AUDIT", line 66
ORA-06512: at line 3
Checked table all_errors
output:
FLOWS_030100 WWV_FLOW_UTILITIES PACKAGE BODY 1 5928 3 PLS-00201: identifier 'DBMS_LOCK' must be declared
Any suggestions ?
Regards,
Remo

Hi Penny,
Your suggested solution worked.
However i got other errors and so i ran apxremov.sql to cleanup the installation.
Forgot to mention that there was a previous installation of apex.
After rerunning apexins.sql installation was completed succesfully.
Thanks for reply.
Remo

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

My itunes was working fine untill i tried to download the most current version of itunes. now it wont boot up and has error messages,error7(windows error 126) and MSVCR80.dll

my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Message has Error status on outbound side - in ABAP inbound proxy !!

Hi All,
One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
Regards
San

Hi ,
Please check whether the correct data is coming from sender side . and check the j2ee engine runtime parameters.
Cheers,
Meera
Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

** BPM Error - Msg has error status on oubound side

Hi Friends,
I am doing BPM scenario. (Receive Step --> Transformation Step --> In Block (For each) Synchronous Send Step ). That's all BPM design.
We have created Server prox (inbound Proxy) in ABAP, it receives PO details and return Sales order no. Coding has been written inside Proxy. If we test Proxy in ABAP, it is working fine.
The required PO data we pass from JDBC. Receive step receives the whole message (It may contain 1 or more PO). In Transformation step, we split message using multiline checkbox( One message per 1 PO).
Message is processed successfully upto this step. In the Synchronous send step, it throws an error.
In SXMB_MONI, 3 messages are generated. In the first message itself, in the outbound status column 'Red Flag' is coming, (but processed successfully). The error is 'Message has error Status on outbound side'. Inside the message 'PE' adapter is in grey color.
So, what could be the problem ..?
Kindly reply, friends.
Kind Regards,
Jegatheeswaran P.

Hi Jegatheeswaran,
Take the Message after transformation and try to test your synchronous service with this message,
if u r using any web service you can use Altova (XML SPY) to test your service with the data after
transformation.
If it does not show any problem then try to see you have build your BPM Properly (Press F7 to test For any syntactical error).
You can also go to SXI_CACHE to see if your Workflow does have status 0 .
To get Exact error Message . Click on PE ->goto->ThechnicalSetting->select synchronous call->click on content tab->and go on navigating you will find detailed exception.
Reward Points IF Helpful
Thanks
Sunil Singh

Message has error status on outbd side

Hi,
I am doing File to IDoc scenario, in SXMB_MONI i am getting the following error "Message has error status on outbd side". I am not using BPM and this interface was working fine earlier .
Any clues!!!!!!!!!!
Regards
Swatantra

Hi Vijay,
Cross check whether you have done these:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps.
Regards.
Praveen

Message has Error Status Outbound Side

Hi All,
I have one question.... we procssed one file from ftp it should creates Idocs in R/3 side we developed this scenario using BPM....it processed successfully inbound side but in Outbound side it is showing Red Flag (Error Meaase : Message has Error Status Outbound Side) and its not creating IDOCs in R/3 Side but in Process engine all steps completed Sucessfully and created Idocs in XI....i tried so many ways...like in Queues and Refreshed Cache and checked RFC connection in Both ways and checked passwords in communication channels.... i could't find any this....if any body help me on this....it would be appritiated.
This was i am testing on Test system i got this type of problem but in Development box it is working successfully we are using the same fuctionality and same code also i don't know why its happening.
Thanks,
Sudheer.

Hi,
Where are you find the Error and
> Process engine all steps completed Sucessfully and created Idocs in XI....
Can you explain in detail
Regards
Sangeetha

Message has error status on outbd. side (error in Moni)

Hello All,
Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
How to reslove the issue, please help me.
Thanks and regards,
Chinna

Hi
Please check the below i think your problem will solve
Hi,
Check whether IDoc was created:
1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
Check Whether IDoc is received by the Receiver:
2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
Thanks ,
Meeravali Dudekula

Shitshitshit /dev/sda4 has errors?

Similar Messages

Maybe you are looking for