SHMA - Shared Objects

hi folks,
we're using shared objects and are wondering how it could be easily achieved to build the "sharded objects" automatically on ALL !!!! application-server, or do we have to start the build-programs per each server manually ????
kind regards,
oliver

Hi,
why don't you use an RFC enabled FM?
You should create many Shared Memory Areas as you need on every application server, and then call up the FM remotely, distributing the call on each server.
After all, the FM implementation should contain the preloading for burn up the shared memory automaitically at read-request and that's all..
Imagine, you can create the FM with a generic table parameter, which you will pass to the root object of every shared memory to fill a class-attribute.
This will be the same in every application server who responses to the RFC call: you start the FM on an the application server XX1 and this will distribute the call to the AS XX2, XX3 and XXX, passing the same internal table. Every FM contains the implementation to set an attribute "TABLE" of every class set up as root object for an area instance.
Obviously, every call on one AS will refresh (or create new versions of) shared objects in all the AS linked with the RFC, to ensure data will be equals all the time.
Hope this helps,
R.
Message was edited by:
        Roberto Pagni

Similar Messages

  • ABAP Shared Objects - External Reference

    Hi,
    I am using ABAP SHared Objects (SHMA and SHMM) as data persistence between 2 BSP Applications
    I want to create a generic Root class with one attribute that is TYPE REF TO OBJECT. The idea is to store any class instance in this attribute of the Root class so as to AVOID creating a seperate Shared AREA for each Class...
    WHen I try to put this generic Root Class in the shared area via detach_commit(), it gives a exception that there are External references in the Shared area which should be closed first
    Does this mean u cannot have a instance variable as an attribute in your ROOT Class.
    Thanks
    SAP User

    Hi,
    Go through the below code, it's working fine....
    *& Report  Z13708_ABAPOBJECTS_INHER
    REPORT  Z13708_ABAPOBJECTS_INHER.
          CLASS C1 DEFINITION
    CLASS C1 DEFINITION.
      PUBLIC SECTION.
        data: var1 type ref to object.
        METHODS: METH1.
    ENDCLASS.                    "C1 DEFINITION
          CLASS C1 IMPLEMENTATION
    CLASS C1 IMPLEMENTATION.
      METHOD METH1.
        WRITE: / 'This is a method one'.
      ENDMETHOD.                                                "METH1
    ENDCLASS.                    "C1 IMPLEMENTATION
          CLASS C2 DEFINITION
    CLASS C2 DEFINITION.
      PUBLIC SECTION.
        METHODS: METH2.
    ENDCLASS.                    "C2 DEFINITION
          CLASS C2 IMPLEMENTATION
    CLASS C2 IMPLEMENTATION.
      METHOD METH2.
        WRITE: / 'This is a method two'.
      ENDMETHOD.                                                "METH2
    ENDCLASS.                    "C2 IMPLEMENTATION
    START-OF-SELECTION.
      DATA REF1 TYPE REF TO C1.
      DATA REF2 TYPE REF TO C2.
      CREATE OBJECT REF2.
      ref1->var1 ?= ref2.
    Regards,
    Azaz Ali.

  • Issue with Shared Objects

    Hi all,
    I've a problem with a program working on Shared Objects technology.
    We have a Job, scheduled in 18 parallelism, and each one writes into the SHM controlled by a SHMA Class.
    At jobs ending, a program reads content from the area and sends an automatic e-mail with the results.
    Everything works well if the writer program is executed on-line.
    Otherwise, in background, seems that nothing is stored in the SHM.
    Here's the code executed by the writer program:
    FORM shared_memory_access  TABLES  it_fehler STRUCTURE rpfausg.
      DATA: errors_reference TYPE REF TO data.
      DATA: lx_pterl00       TYPE REF TO zcx_pterl00_collector.
      TRY.
    * --> Get SHM Access
          CALL METHOD zcl_pterl00_collector_root=>build
            EXPORTING
              invocation_mode = cl_shm_area=>invocation_mode_explicit.
    * --> It's ok?
          IF zcl_pterl00_collector_root=>area_exists EQ 'X'.
    * --> Fill Data:
            GET REFERENCE OF it_fehler[] INTO errors_reference.
            CALL METHOD zcl_pterl00_collector_root=>fill_area_with_data
              EXPORTING
                error_messages_dref = errors_reference.
          ENDIF.
        CATCH zcx_pterl00_collector INTO lx_pterl00.
          MESSAGE lx_pterl00 TYPE 'S' DISPLAY LIKE 'E'. "Non-blocking -> JOBS
      ENDTRY.
    ENDFORM.                    " SHARED_MEMORY_ACCESS
    Here is the section from the class handling the attachment to the SHMA:
    METHOD if_shm_build_instance~build.
      DATA: lx_collector TYPE REF TO zcx_pterl00_collector.
    * --> Automatic building of instance:
      TRY.
          CALL METHOD get_handle_for_update( inst_name ).
        CATCH zcx_pterl00_collector INTO lx_collector.
          MESSAGE lx_collector TYPE 'X'.
        CATCH: cx_shm_no_active_version.
          TRY.
              CALL METHOD get_handle_for_write( inst_name ).
            CATCH zcx_pterl00_collector INTO lx_collector.
              MESSAGE lx_collector TYPE 'X'.
          ENDTRY.
        CATCH: cx_shm_inconsistent.
          zcl_pterl00_collector=>free_area( ).
          TRY.
              CALL METHOD get_handle_for_write( inst_name ).
            CATCH zcx_pterl00_collector INTO lx_collector.
              MESSAGE lx_collector TYPE 'X'.
          ENDTRY.
      ENDTRY.
    ENDMETHOD.
    I cannot explain why multiple jobs do not populate the area...

    Hi Rob,
    if your requirement is to have many (18) active processes all updating the shared object, and very few simply reading the shared object, then versioning is probably not what you require.
    Versioning allows readers to continue to attach and read the active shared object instance while the updater gets their own instance of the shared object. When the updater does a detach_commit the old instance becomes obsolete and all new requests to attach will be diected to the new instance. The old instance will be cleaned up by garbage collection once all of its readers have detached.
    If your programs primarily attach for update then you will decrease performance with versioning because a new instance needs to be created at every attach for update.
    Perhaps you should just retry the attach for update after a small period of time has passed?
    If, on the other hand, you do have lots of other readers of the shared object you may well still find that it is more efficient not to have versioning. I build a web shop catalogue using shared objects and found that versioning severly hampered performance. This was because, once the catalogue was initialised, updaters were pretty rare but readers were constant.
    BTW make sure you keep the locks on the object as short as possible. Do all your preparation work first, then attach for update, update, detach as quick as possible.
    Cheers
    Graham Robbo

  • ABAP Shared Objects

    Hi,
    I'm working on Shared Memory Objects.
    I would like to know if there's a way to create Shared Memory Areas (transaction: SHMA) by code.
    Till now, i didn't found a solution for this.
    Thanks,
    Fábio Ramalho.

    Hi,
    [Shared Objects - Implementation|http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/85634e53d422409f0975aa9a551297/frameset.htm]
    [Check this one Ref link|Shared Objects/Memory (SHMA);
    For Text tables, "Reading" the Shared Objects would be easy, but "Updating" would not be that easy.
    To update the shared object, you need to open the ojbect for update from all the places from where the text table is being updated. E.g. MAKT from the Material Master (and somewhere else, I don't know).
    Shared Objects would be good when you are not dealing with the data which can be directly updated from Production. E.g. Configuration data.
    Regards,
    koolspy.

  • What is shared objects?

    Hi all,
       can you tell me what is shared objects and how it is used in abap objects, if possible explain with some examples.
    Thanks
    Sathish

    Hi Satish,
    <b>Shared Objects</b>
    Shared Objects are objects in the shared memory. Instances of classes and anonymous data objects can be stored. Named data objects can be stored as attributes of classes.
    <b>Shared Memory</b>
    The shared memory is a memory area on an application server, which is accessed by all of this server’s ABAP programs. Before shared objects were implemented, ABAP programs could access this memory area using the EXPORTand IMPORT statements exclusively with the SHARED BUFFER or SHARED MEMORY additions, and instances of classes or anonymous data objects existed exclusively in the internal session of an ABAP program.
    With the implementation of shared objects with Release 6.40, the shared memory was enhanced with the shared objects memory that stores shared objects. The size of the shared objects memory is determined by the abap/shared_objects_size_MB profile parameter.
    Shared objects are stored in what are called shared memory areas. You create and manage areas and their properties using Transaction SHMA .
    Now you got an idea of what shared objects are :
    Go to this link you will find screen shots and a smaple program here.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/900e3d9d-559e-2910-9dae-b132157a220f">shared_objects</a>
    Reward points if useful,
    Aleem.

  • Error while loading shared libraries: librt.so.1: cannot open shared object

    error while loading shared libraries: librt.so.1: cannot open shared object
    I cant run my apache server v2.2.3.
    Can someone help me?
    thanks in advance

    That could be an accessibility issue. Check the user with whom you installed Apache server. Check the user has permissions to access the libraries.
    -Mahendra.

  • How to Get property values from Shared Object in client's load event - Very urgent

    I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
    Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
    Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
    1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
    2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
    Any kind of help would be greatly appreciated.
    Thank You.

    I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
    Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
    Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
    1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
    2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
    Any kind of help would be greatly appreciated.
    Thank You.

  • Calling shared objects in unix from Forms 6i and 10g

    I would like to know how to call shared objects in unix from Froms 6i and 10g. Can anybody help in this regard? Your help is very well appreciated.

    Hi,
    Do you have any 11i instance where those custom forms are used? If yes, you will have to copy those forms from 11i to R12 instance, open the forms using Forms 10g builder, compile it and upload it back to the server.
    Note: 427879.1 - How To Customize And Compile An Application Seeded Form (FMB) Or Library (PLL)?
    Note: 743490.1 - Customization in Oracle Applications
    Note: 563258.1 - How To Upgrade 11i Custom Forms And Reports To R12
    Regards,
    Hussein

  • Exception handling is not working in GCC compile shared object

    Hello,
    I am facing very strange issue on Solaris x86_64 platform with C++ code compiled usging gcc.3.4.3.
    I have compiled shared object that load into web server process space while initialization. Whenever any exception generate in code base, it is not being caught by exception handler. Even though exception handlers are there. Same code is working fine since long time but on Solaris x86, Sparc arch, Linux platform
    With Dbx, I am getting following stack trace.
    Stack trace is
    dbx: internal error: reference through NULL pointer at line 973 in file symbol.cc
    [1] 0x11335(0x1, 0x1, 0x474e5543432b2b00, 0x59cb60, 0xfffffd7fffdff2b0, 0x11335), at 0x11335
    ---- hidden frames, use 'where -h' to see them all ----
    =>[4] __cxa_throw(obj = (nil), tinfo = (nil), dest = (nil), , line 75 in "eh_throw.cc"
    [5] OBWebGate_Authent(r = 0xfffffd7fff3fb300), line 86 in "apache.cpp"
    [6] ap_run_post_config(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x444624
    [7] main(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x42c39a
    I am using following link options.
    Compile option is
    /usr/sfw/bin/g++ -c -I/scratch/ashishas/view_storage/build/coreid1014/palantir/apache22/solaris-x86_64/include -m64 -fPIC -D_REENTRANT -Wall -g -o apache.o apache.cpp
    Link option is
    /usr/sfw/bin/g++ -shared -m64 -o apache.so apache.o -lsocket -lnsl -ldl -lpthread -lthread
    At line 86, we are just throwing simple exception which have catch handlers in place. Also we do have catch(...) handler as well.
    Surpursing things are..same issue didn't observe if we make it as executable.
    Issue only comes if this is shared object loaded on webserver. If this is plain shared object, opened by anyother exe, it works fine.
    Can someone help me out. This is completly blocking issue for us. Using Solaris Sun Studio compiler is no option as of now.

    shared object that load into web server process space
    ... same issue didn't observe if we make it as executable.When you "inject" your shared object into some other process a well-being of your exception handling depends on that other process.
    Mechanics of x64 stack traversing (unwind) performed when you throw the exception is quite complicated,
    particularly involving a "nearly-standartized" Unwind interface (say, Unwind_RaiseException).
    When we are talking about g++ on Solaris there are two implementations of unwind interface, one in libc and one in libgcc_s.so.
    When you g++-compile the executable you get it directly linked with libgcc_s.so and Unwind stuff resolves into libgccs.
    When g++-compiled shared object is loaded into non-g++-compiled executable's process _Unwind calls are most likely already resolved into Solaris libc.
    Thats why you might see the difference.
    Now, what exactly causes this difference can vary, I can only speculate.
    All that would not be a problem if _Unwind interface was completely standartized and properly implemented.
    However there are two issues currently:
    * gcc (libstdc++ in particular) happens to use additional non-standard _Unwind calls which are not present in Solaris libc
    naturally, implementation details of Unwind implementation in libc differs to that of libgccs, so when all the standard _Unwind
    routines are resolved into Solaris version and one non-standard _Unwind routine is resolved into gcc version you get a problem
    (most likely that is what happens with you)
    * libc Unwind sometimes is unable to decipher the code generated by gcc.
    However that is likely to happen with modern gcc (say, 4.4+) and not that likely with 3.4.3
    Btw, you can check your call frame to see where _Unwind calls come from:
    where -h -lIf you indeed stomped on "mixed _Unwind" problem then the only chance for you is to play with linker
    so it binds Unwind stuff from your library directly into libgccs.
    Not tried it myself though.
    regards,
    __Fedor.

  • Linker Error while creating shared object.

    While creating shared object we got "file processing error".
    Below is our compilation line and the error out put.
    ==================
    /net/icom3/opt//SUNWspro/SC5.0/bin/CC -o fn_ctx_onc_fn_files.so.1 -G -h fn_ctx_onc_fn_files.so.1 -z text -z defs -z combreloc -norunpath -nolib -Qo
    ption ld -R/usr/lib/fn pics/FNSP_filesOrgContext_default.o pics/FNSP_filesFlatContext_default.o pics/fnsp_internal_common.o pics/FNSP_nisAddress.o
    pics/FNSP_nisOrgContext_default.o pics/FNSP_nisFlatContext_default.o pics/FNSP_hash_function.o pics/FNSP_filesHierContext.o pics/FNSP_filesDotC
    ontext.o pics/FNSP_filesFlatContext.o pics/FNSP_filesHUContext.o pics/FNSP_filesWeakSlashContext.o pics/FNSP_filesPrinternameContext.o pics/FNSP_
    filesPrinterObject.o pics/FNSP_filesOrgContext.o pics/FNSP_filesImpl.o pics/fnsp_files_internal.o pics/onc_fn_files.o -lnsl -lc -L/user/vts/X
    FN_CHECK/jnk/usr/lib/fn -lxfn -lfn_spf -lfnsp -lfn_p
    ld: fatal: File processing errors. No output written to fn_ctx_onc_fn_files.so.1
    ==================================
    Thanks in advance.
    -Lokesh MS

    Hi,
    The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
    If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
    Thanks,
    Indrashis

  • Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

    Hi Gurus,
    I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
    OS: OEL5 32 bit
    oifcfg iflist
    eth0 192.168.2.0
    eth1 10.0.0.0
    oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth1 10.1.1.0 global cluster_interconnect
    eth0 192.168.2.0 global public
    cat /etc/hosts
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    My questions are:
    should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
    if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
    Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
    Edited by: ayyappa on Aug 20, 2009 10:13 AM
    Edited by: ayyappa on Aug 20, 2009 10:14 AM
    Edited by: ayyappa on Aug 20, 2009 10:15 AM

    a step forward towards resolution but i need some help from the gurus.
    root# cat /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    root# /u01/app/oracle/product/crs/bin/oifcfg iflist
    eth1 10.0.0.0
    eth0 192.168.2.0
    root# /u01/app/oracle/product/crs/bin/oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth0 191.168.2.0 global public
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    ****ORACLE_HOME environment variable not set!
    ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
    root# export ORACLE_BASE=/u01/app/oracle
    root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
    root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
    root# export PATH=$PATH:$ORACLE_HOME/bin
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP does not exist.
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
    VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
    Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
    My questions to the gurus are as follows:
    Should ping on vip work? It does not work now.
    srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
    VIP is not running on node: sunny1pub
    GSD is not running on node: sunny1pub
    PRKO-2016 : Error in checking condition of listener on node: sunny1pub
    ONS daemon is not running on node: sunny1pub
    [root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
    Name Type Target State Host
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

  • Error while loading shared libraries: libdl.so.2: cannot open shared object

    I got the error when I run the Identity server "./start_ois_server"
    Using Linux Threading Library.
    /opt/netpoint/identity/oblix/apps/common/bin/ois_server: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    OIS Server started with pid: 11241
    [root@EX4200SRV02 bin]# /bin/sh: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    Can someone help me resolving this issue?
    thanks. Your help is very much appreciated.
    thanks.

    I resolved the issue by commenting "LD" in start_ois_server.

  • Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

    Hi Friends,
    I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
    My OS is Redhat Linux (64 bit).
    What's the issue?
    onfiguring the installer for this system's environment...
    awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    Launching installer...
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    [oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
    Regards,
    DB

    Hi;
    I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
    If you run appstier be sure you source env file with applmgr user
    Regard
    Helios

  • Cannot open shared object file: on Informatica Power Centre Installation

    Hi Friends,
    I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
    My OS is Redhat Linux (64 bit).
    What's the issue?
    onfiguring the installer for this system's environment...
    awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    Launching installer...
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    [oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
    Regards,
    DB

    Hi;
    I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
    If you run appstier be sure you source env file with applmgr user
    Regard
    Helios

  • A query with respect to creation of the  shared Objects.

    Hi ,
    I am having a query with respect to creation of the  shared Objects.
    I have seen a example where the Author is creatining Shared Object as shown
    below :
    SharedObj = null;
    sharedObj = SharedObject.getLocal("myTasks");
    and there is nothing related to the word "myTasks" anywhere in the Application .
    Can anybody please let me know what is this word "myTasks" mean here ??
    Thanks in advance .

    hi,
    With a shared object it will create one if it doesn't exist, so "myTasks" will become the shared object name or if it exists it will load any objects that are within that shared object.
    Below is a simple example that uses sharedobjects to store login details.
    http://gumbo.flashhub.net/login/
    David

Maybe you are looking for