SHOCKED by the treatment received from BT
Hello folks
I really am gobsmacked by how badly I have been treated by BT regarding my broadband. All of a sudden on Tuesday night, my broadband stopped working and the broadband light turned a solid red. I could not get through to anyone on Tuesday night, so I called when I got back from work on Wednesday. After the usual tests, I was told I needed to be transfered to another department. This department said there was a problem in my area and an engineer was working on it and I should be up and running within 48 hours. It turns out there was not even a problem in my area and I was being lied to. This was confirmed by the fault line.
Called back on Thursday and was told an engineer would need to attend and and an appointment was booked for Friday between 8am and 1pm. No sign of engineer at 11am. Called and was told he is working on the problem at the exchange. This was also a lie. He showed at 1pm and went to the cabs box and did some checks etc and called back at 3pm and said that he has done all his work, another section was currently finishing off the rest of the work and I would be back online for 5pm. This was also a lie. 5pm came and went and still a red light and no internet. I called BT and was told that I need to make another appointment for MONDAY. So the engineer completely lied. I complained to the call handler and they put the phone down on me! I called again and was told no managers are available and one would call me back in an hour. They never bothered to call back.
I am in shock how poor the customer service is for such a big company. I am still without broadband and I am thinking of contacting Ofcom and the papers.
Really feel at a loss and do not know what to do. Angry and shocked are the only words to sum up the whole experience. I will not rest until this has been exposed and dealt with properly.
Hi There is no guarantee of continuous service with residential broadband unfortunately faults and service interruptions do happen not just with BT but all providers
This is from BT terms and conditions of service
Quality of Service
We aim to provide a continuous, high-quality service but we do not guarantee either the quality of the service or that the service will be available at all times. From time to time faults in the service may occur. We will repair these faults as soon as we can.
If you have contacted the forum mods they will get back to you within 72 hours by phone or email and get your connection problems resolved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Similar Messages
-
MM - Daily Report of the materials received from other plants
Hello
I want the daily report of all the materials received from other plants i,e by stock transfer. Is there any way to get this information from the standard reports
regards
Ravi PalDear Prashant
i checked with this transaction but the problem is that this gived the report for only the GR taken against STO with SD Delivery i,e with or with out billing. the system is not picking the STO with MM delivery whan we enter the supplyiny plant as u said
pl check this
thnaks
regards
ravi pal -
SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
on IE to go to the previous page. Then it catch the error as:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.
I am using SQL2012 and Sharpoint2013.Hi Alisa,
Thanks for your reply, I changed the web.config, but the issue did not resolved.
I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
This issue can not reproduce on Chrome only occur on IE.
So, do you have some details suggestion for me to fix it?
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<configuration>
<configSections>
<sectionGroup name="SharePoint">
</sectionGroup>
<location path="_layouts/15/TA_AppMonitoringDetails.aspx">
<appSettings>
<add key="ChartImageHandler" value="storage=memory;timeout=20" />
</appSettings>
</location>
<location path="_layouts/15/ReportServer/RSViewerPage.aspx">
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
</appSettings>
</location>
<system.net>
<defaultProxy />
</system.net>
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
<add key="aspnet:RestrictXmlControls" value="true" />
<add key="FeedCacheTime" value="300" />
<add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
<add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
<add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
</appSettings> -
NewLine Character in the String received from Interactive Adobe Form
Hello Experts,
Following is the issue we have with interactive Adobe Form
We have a text area within the form. User enters the text in multiple lines in this text area.
We are calling a backend function module designed in SE37 that accepts and process the data from the adobe form. We are also processing the string data user enters in the text area.
When we receive the string from the form, the newline character within the string is displayed as '#' in the debugger. We tried splitting this string using cl_abap_char_utilities=>newline and cl_abap_char_utilities=>cr_lf but NO luck. Though in the debugger we see cl_abap_char_utilities=>newline as '#' in the debugger and also '#' is present within the string, for some reason when string is processed to find cl_abap_char_utilities=>newline, we can find/locate it.
Because ABAP code is not able to identify the newline character within the string received from Adobe form, we are not able to maintain the formatting of the string as it was entered in the form.
Any help to resolve this issue is appreciated.
Thanks in Advance.
Regards,
BhushanHi Bhushan,
I was going through your issue, and I feel this is something you can do with scripting. Basically you should read whole string and find the new line character and replace with a space or comma, as per your requirment.
Do like following:
In the exit event of the field select java script and write following code:
var strng = this.rawValue;
strng.replace(/\n/g, " ");
above im reaplcing new line with a space.
I think it should work I have not tested it. Pls update if you test it .
Regards,
Ravi.D -
Hi All,
We Have implemented AD RMS in our organisation recently.But the Problem we are facing here many users those are Ms office 2013 we will get the error"The Data Received from the server running AD RMS didn't match the expected format.contact
your system administrator for further investigation." and those who are in Ms office 2010 Professional it says
"The service is Temporally unavailable.Ensure the you have connectivity to this server.This error could be caused if you are working offline.Proxy setting are preventing your connection or intermittent network issue."
Below are the workaround did,
1.Able to reach to Our pipeline ADRMS cluster.
2.We have a valid Certificate.
3.if we type https://adrms.ourdomain.com its working fine.
4.Manually put the registry setting for effected computers.
5. Applied the Hotfixes:MicrosoftFixit50903,KB2627273.
Kindly help or suggest us to resolve the above issue as many computers in domain are not working with IRM.
Thanks and reqard,
Mohammed Siddiq.Hi Mohammed,
Were you able to fix the issue with CRL disablement?
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer. -
Why were no attributes in the Error received from Adapter Framework (AF)?
Hi All,
We have a local processing scenario where we use the Integration Configuration through Advanced Adapter Engine to download attachment using Sender Mail Adapter from Lotus Notes Mail and Upload the file attachment into an FTP using Receiver File Adapter. As part of our testing we deliberately set the Sender Mail Adapter to produce error by changing the configuration like setting a wrong URL to simulate downtime on Lotus Notes. The error shows up in the RWB CommChannel and an error record is received from AF to send Alert. When the alert tries to find the alert rule it is unable to do so because the condition (Component, Interface and Namespace) values are empty "*Find rule for (From:::: To::::)" This is from the report SXMSALERT_LOGREADER.
The (From:::: To::::) should contain the Sender Component, Interface and Namespace as FROM, and Receiver Component, Interface and Namespace as TO but they are not picked up from the Mail Adapter because there are no message/payload yet but I am expecting at least the Component to be included.
The result of the empty (From:::: To::::) will be a "*No matching rule found" and no alert is sent.
Do anyone had the same issue? Is this a possible bug in PI?
Please let me know if you need additional detail.
Regards,
OrlandoHi Orlando,
When the sender channel reads any message, it would be able to determine the Sender service, Interface and namespace from Sender agreement. It is not dependent on the payload.
To generate the alert for such, you can modify the alert rule to check only for the Sender serice, interface and namespace.
Hope this helps.
Regards,
Sanjeev. -
Capturing the response received from the WCF web service method?
Hi,
I am trying to call a WCF web service method with input parameters in an xml file and then receive the returned output data by the web service as response into an xml file.
So far I am able to call the webservice method successfully and not sure how to capture the response data. I am able to see the response data in the tracked message event using the query expression search at the BizTalk group root.
I may be missing something simple in my orchestration(image at http://social.msdn.microsoft.com/Forums/getfile/535971) ?
Steps in my orchestration are,
1) Receive the xml file with input parameters
2) Send to webservice using WCF-BasicHttp transport type
3) Receive response from web service
4) Send to xml file
Not sure how I can have 2 receive shapes in series there. I have seen few related posts in the forum but could not resolve.
Could someone please correct me?Hi Rachit,
Thanks for your quick response. My orchestration is similar to the one in that post. In your post at step 7, how you are able to set 'Activate property' of the receive shape to true? as its the 2nd receive shape in series.
I am unable to post any images or links at the moment. My orchestration is posted at this link http://social.msdn.microsoft.com/Forums/getfile/535971
I am able to access the above link using chrome.
Yes, I did use the Request/Response port to communicate with the web service. I
am looking to achieve similar to the one in your post.
Thanks. -
The length received from the server does not match the expected length
Every time I attempt to transfer a tv show or movie from my mac mini library to my work laptop library, I receive the above error - any ideas?
I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/ -
Information received from the QuickTime server is invalid.
I recently updated my itunes to the latest version and with that everytime I try to open itunes or Quicktime, I receive a message saying "Some of your QuickTime software is out of date. You can fix this problem by updating to the latest version", when I click "Do it now", an error message pops up saying "Information received from the QuickTime server is invalid. Please try again later". I have tried uninstalling and reinstalling QuickTimes but this does not help. Please help!
I have this identical problem. I have now completed a successful (?) update to Quicktime Player 7.3.1. Every time I boot or open Quicktime, I receive the message that some of the components are out of date. However, I am no longer receiving the "Information received from the QuickTime server is invalid. Please try again later" message. When I click on "do it now" the box simply disappears.
-
Propery Binding exception when bound to data received from the web socket
Hi,
I am getting the following exception when I try to bind my properties to the data received from the MessageWebSocket. Works fine when the data is received from the normal StreamSocket.
A first chance exception of type 'System.Runtime.InteropServices.COMException' occurred in System.dll
at System.StubHelpers.EventArgsMarshaler.CreateNativePCEventArgsInstance(String name)
at System.Runtime.InteropServices.WindowsRuntime.PropertyChangedEventArgsMarshaler.ConvertToNative(PropertyChangedEventArgs managedArgs)
at System.ComponentModel.PropertyChangedEventHandler.Invoke(Object sender, PropertyChangedEventArgs e)
at WinStoreApp.Common.BindableBase.OnPropertyChanged(String propertyName)
at WinStoreApp.Common.BindableBase.SetProperty[T](T& storage, T value, String propertyName)
at WinStoreApp.DataModel.Model.StockItem.set_BidVol(String value)
at WinStoreApp.Core.FIDValueMapper.PopulateFIDValue(Int32 fid, String value, StockItem stockItem)
at WinStoreApp.Core.StockFeedReceiver.<ProcessData>d__20.MoveNext()
Code snippet of message received:
static async void _websocket_MessageReceived(MessageWebSocket sender, MessageWebSocketMessageReceivedEventArgs args)
try
using (var reader = args.GetDataReader())
reader.UnicodeEncoding = Windows.Storage.Streams.UnicodeEncoding.Utf8;
string message = reader.ReadString(reader.UnconsumedBufferLength);
await myObj.Message = message; // Exception here
catch (Exception ex)
Please let me know what may the problem.Hi,
According to your description, I think you can received message from server by using
MessageWebSocket class, but the data you received may not be right. I see the document in the link below:
http://msdn.microsoft.com/en-us/library/windows/apps/xaml/windows.networking.sockets.aspx
In the document above indicates:
StreamSocket class is a stream socket to use for incoming or outgoing network communication over TCP
MessageWebSocket is a message-based WebSocket.
If the server send the data based on stream format, the
MessageWebSocket class may not received the right data.
You can use StreamWebSocket
to see whether the problem occur. And you should give us more information and upload a test project to OneDrive so that we can test it.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey. -
Transmit and receive from the same ip address?
Helpers:
We 've been using transmit/Receive for a while, I read all the discussions. No one seem really know does the transmit send to a destination IP address and the destination receive from the same IP or the IP address the sender send from?
like sender send from: java Transmitter 123.4.3.162 5000
receiver receive from: java Receive 123.4.3.162 5000
or sender send from: java Transmitter 123.4.3.162 5000
receiver receive from: java Receive 10.118.5.162 5000
I think the frist one is correct, does anyone has clear idea and experience about it.
Desperate coder!Receiver code is as follows
import java.io.*;
import java.awt.*;
import java.net.*;
import java.awt.event.*;
import java.util.Vector;
import javax.media.*;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.AudioFormat;
import javax.media.format.VideoFormat;
import javax.media.Format;
import javax.media.format.FormatChangeEvent;
import javax.media.control.BufferControl;
public class AVReceive2 implements ReceiveStreamListener, SessionListener,ControllerListener
String sessions[] = null;
RTPManager mgrs[] = null;
Vector playerWindows = null;
boolean dataReceived = false;
Object dataSync = new Object();
public AVReceive2(String sessions[])
this.sessions = sessions;
protected boolean initialize()
try
InetAddress ipAddr;
SessionAddress localAddr = new SessionAddress();
SessionAddress destAddr;
mgrs = new RTPManager[sessions.length];
playerWindows = new Vector();
SessionLabel session;
for (int i = 0; i < sessions.length; i++)
try
session = new SessionLabel(sessions);
catch (IllegalArgumentException e)
System.err.println("Failed to parse the session address given: " + sessions[i]);
return false;
System.err.println(" - Open RTP session for: addr: " + session.addr + " port: " + session.port + " ttl: " + session.ttl);
mgrs[i] = (RTPManager) RTPManager.newInstance();
mgrs[i].addSessionListener(this);
mgrs[i].addReceiveStreamListener(this);
ipAddr = InetAddress.getByName(session.addr);
if( ipAddr.isMulticastAddress())
// local and remote address pairs are identical:
localAddr= new SessionAddress( ipAddr,session.port,session.ttl);
destAddr = new SessionAddress( ipAddr,session.port,session.ttl);
else
localAddr= new SessionAddress( InetAddress.getLocalHost(),session.port);
destAddr = new SessionAddress( ipAddr, session.port);
mgrs[i].initialize( localAddr);
BufferControl bc = (BufferControl)mgrs[i].getControl("javax.media.control.BufferControl");
if (bc != null)
bc.setBufferLength(350);
mgrs[i].addTarget(destAddr);
catch (Exception e)
System.err.println("Cannot create the RTP Session: " + e.getMessage());
return false;
long then = System.currentTimeMillis();
long waitingPeriod = 30000; // wait for a maximum of 30 secs.
try
synchronized (dataSync)
while (!dataReceived && System.currentTimeMillis() - then < waitingPeriod)
if (!dataReceived)
System.err.println(" - Waiting for RTP data to arrive...");
dataSync.wait(1000);
catch (Exception e) {}
if (!dataReceived)
System.err.println("No RTP data was received.");
close();
return false;
return true;
public boolean isDone()
return playerWindows.size() == 0;
protected void close()
for (int i = 0; i < playerWindows.size(); i++)
try
((PlayerWindow)playerWindows.elementAt(i)).close();
catch (Exception e) {}
playerWindows.removeAllElements();
// close the RTP session.
for (int i = 0; i < mgrs.length; i++)
if (mgrs[i] != null)
mgrs[i].removeTargets( "Closing session from AVReceive2");
mgrs[i].dispose();
mgrs[i] = null;
PlayerWindow find(Player p)
for (int i = 0; i < playerWindows.size(); i++)
PlayerWindow pw = (PlayerWindow)playerWindows.elementAt(i);
if (pw.player == p)
return pw;
return null;
PlayerWindow find(ReceiveStream strm)
for (int i = 0; i < playerWindows.size(); i++)
PlayerWindow pw = (PlayerWindow)playerWindows.elementAt(i);
if (pw.stream == strm)
return pw;
return null;
public synchronized void update(SessionEvent evt)
if (evt instanceof NewParticipantEvent)
Participant p = ((NewParticipantEvent)evt).getParticipant();
System.err.println(" - A new participant had just joined: " + p.getCNAME());
public synchronized void update( ReceiveStreamEvent evt)
RTPManager mgr = (RTPManager)evt.getSource();
Participant participant = evt.getParticipant(); // could be null.
ReceiveStream stream = evt.getReceiveStream(); // could be null.
if (evt instanceof RemotePayloadChangeEvent)
System.err.println(" - Received an RTP PayloadChangeEvent.");
System.err.println("Sorry, cannot handle payload change.");
System.exit(0);
else
if (evt instanceof NewReceiveStreamEvent)
try {
stream = ((NewReceiveStreamEvent)evt).getReceiveStream();
DataSource ds = stream.getDataSource();
// Find out the formats.
RTPControl ctl = (RTPControl)ds.getControl("javax.media.rtp.RTPControl");
if (ctl != null)
System.err.println(" - Recevied new RTP stream: " + ctl.getFormat());
else
System.err.println(" - Recevied new RTP stream");
if (participant == null)
System.err.println(" The sender of this stream had yet to be identified.");
else
System.err.println(" The stream comes from: " + participant.getCNAME());
// create a player by passing datasource to the Media Manager
Player p = javax.media.Manager.createPlayer(ds);
if (p == null)
return;
p.addControllerListener(this);
p.realize();
PlayerWindow pw = new PlayerWindow(p, stream);
playerWindows.addElement(pw);
synchronized (dataSync)
dataReceived = true;
dataSync.notifyAll();
catch (Exception e)
System.err.println("NewReceiveStreamEvent exception " + e.getMessage());
return;
else
if (evt instanceof StreamMappedEvent)
if (stream != null && stream.getDataSource() != null)
DataSource ds = stream.getDataSource();
// Find out the formats.
RTPControl ctl = (RTPControl)ds.getControl("javax.media.rtp.RTPControl");
System.err.println(" - The previously unidentified stream ");
if (ctl != null)
System.err.println(" " + ctl.getFormat());
System.err.println(" had now been identified as sent by: " + participant.getCNAME());
else
if (evt instanceof ByeEvent)
System.err.println(" - Got \"bye\" from: " + participant.getCNAME());
PlayerWindow pw = find(stream);
if (pw != null)
pw.close();
playerWindows.removeElement(pw);
public synchronized void controllerUpdate(ControllerEvent ce)
Player p = (Player)ce.getSourceController();
if (p == null)
return;
// Get this when the internal players are realized.
if (ce instanceof RealizeCompleteEvent)
PlayerWindow pw = find(p);
if (pw == null)
// Some strange happened.
System.err.println("Internal error!");
System.exit(-1);
pw.initialize();
pw.setVisible(true);
p.start();
if (ce instanceof ControllerErrorEvent)
p.removeControllerListener(this);
PlayerWindow pw = find(p);
if (pw != null)
pw.close();
playerWindows.removeElement(pw);
System.err.println("AVReceive2 internal error: " + ce);
class SessionLabel
public String addr = null;
public int port;
public int ttl = 1;
SessionLabel(String session) throws IllegalArgumentException
int off;
String portStr = null, ttlStr = null;
if (session != null && session.length() > 0)
while (session.length() > 1 && session.charAt(0) == '/')
session = session.substring(1);
// Now see if there's a addr specified.
off = session.indexOf('/');
if (off == -1)
if (!session.equals(""))
addr = session;
else
addr = session.substring(0, off);
session = session.substring(off + 1);
// Now see if there's a port specified
off = session.indexOf('/');
if (off == -1)
if (!session.equals(""))
portStr = session;
else
portStr = session.substring(0, off);
session = session.substring(off + 1);
// Now see if there's a ttl specified
off = session.indexOf('/');
if (off == -1)
if (!session.equals(""))
ttlStr = session;
else
ttlStr = session.substring(0, off);
if (addr == null)
throw new IllegalArgumentException();
if (portStr != null)
try {
Integer integer = Integer.valueOf(portStr);
if (integer != null)
port = integer.intValue();
catch (Throwable t)
throw new IllegalArgumentException();
else
throw new IllegalArgumentException();
if (ttlStr != null)
try {
Integer integer = Integer.valueOf(ttlStr);
if (integer != null)
ttl = integer.intValue();
catch (Throwable t)
throw new IllegalArgumentException();
class PlayerWindow extends Frame {
Player player;
ReceiveStream stream;
PlayerWindow(Player p, ReceiveStream strm) {
player = p;
stream = strm;
public void initialize() {
add(new PlayerPanel(player));
public void close() {
player.close();
setVisible(false);
dispose();
public void addNotify() {
super.addNotify();
pack();
class PlayerPanel extends Panel {
Component vc, cc;
PlayerPanel(Player p) {
setLayout(new BorderLayout());
if ((vc = p.getVisualComponent()) != null)
add("Center", vc);
if ((cc = p.getControlPanelComponent()) != null)
add("South", cc);
public Dimension getPreferredSize() {
int w = 0, h = 0;
if (vc != null) {
Dimension size = vc.getPreferredSize();
w = size.width;
h = size.height;
if (cc != null) {
Dimension size = cc.getPreferredSize();
if (w == 0)
w = size.width;
h += size.height;
if (w < 160)
w = 160;
return new Dimension(w, h);
public static void main(String args[])
String[] argv = new String[2];
argv[0] = "100.210.0.220/42050";
argv[1] = "100.210.0.220/4002";
AVReceive2 avReceive = new AVReceive2(argv);
if (!avReceive.initialize())
System.err.println("Failed to initialize the sessions.");
System.exit(-1);
try {
while (!avReceive.isDone())
Thread.sleep(1000);
} catch (Exception e) {}
System.err.println("Exiting AVReceive2"); -
Advance Received from customers is appearing as Debit balance...
Hi All,
Please let me know what could be done for the below issue...
We have noticed an error in our books where the
Advance received from customers is appearing as a debit balance at few business
areas.
Awaiting for responsesHi,
Please note that advance recived from customer should stand as a liability in financial. Advances GL accounts are mapped in OBXR. Will you please tell me complete entry that generated. May be it is a reversed document. Please check it if it is a reversal of an advanced wrongly booked earlier.
Regards -
Regarding dynamic changes in the layout based on the data received
hi,
i am trying to design an application using flex at the frontend and what i want is that based on the inputs given on the client-side the data received from the back end should change accordingly like the no of panels showing a particular information can vary depending upon the data and has to be adjusted
in a limited given space.how can i be able to acheive this dynamic display and change on the frontend arrangement of panels.
thanksHi Naidu,
In the Second Screen first Create all 15 Fields.
in PBO of Second Screen.
module STATUS_100.
In Program
Module status_100.
case FIELD_VALUE.
when 'X'.
loop at screen.
if screen-name = 'SCREEN_NAME' " The Field which you dont want.
screen-invisible = 1.
screen-active = 0.
modify screen.
endif. " Similary process for other Values aswell.
endloop.
endmodule.
Just you need to do little bit more work since this gives a clear Idea as how to proceed.
CHeerz
Ram -
Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working
Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps! -
I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.
Maybe you are looking for
-
I have an odd "event" occurring when I go to save for web in photoshop. I'll attempt to make sense of it... I am using CS3. When saving to web, Photoshop automatically includes an additional image along with the one I am actually working on. The orig
-
Getting a problem while executing RFFOEDI1 program
We are running a job which has the RFFOEDI1 as the one of the steps. This program is existing in two jobs. One job is for Proposal run and the other one is for payment processing. The job which is used for Proposal run is coming out with an error -
-
HT5622 Hello , how i delete my apple id
Hello, how can i delete my apple id ?
-
I am about to set up a network in a new home. I am confused by the AirPort Base Station/Extreme: do these replace the need for a router, and if not, what is the benfit of these above a standard wireless router like a NetGear for example?
-
Account Lookup Case sensative - make insensative
Hello, When looking up an account or searching for an account within the application is there a way to make the Account Lookup field not be case sensitive or a wild card that can be added. The "is like" doesn't work. Thanks