Shockwave 11 will not install
I've read all the threads on people having trouble installing
Shockwave 11, tried all the suggestions, and still can't get it to
intall on my system. Win XP, IE 6. Shockwave 10 worked. Can I
reinstall it somehow? Does anyone from Adobe read these?
I was having problems installing Shockwave 11 as well, but I
finally got it to work by downloading the Full version instead of
the lite version. The problem is that Adobe does not clearly and
accurately point you to where to get this file. I use Windows XP
and IE 7. Here's what I did:
1) Uninstall Shockwave from your pc.
http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
2) Reboot
3) Install Shockwave 11 (Full)
http://fpdownload.macromedia.com/get/shockwave/default/english/win95nt/latest/Shockwave_In staller_Full.exe
When installation is complete, Adobe will tell you that
you've just installed Shockwave 11.
After I did this and then tried to play a game on a website
requiring Shockwave that was giving me errors before, it
successfully downloaded additional Shockwave components
automatically and I am no longer getting errors of any kind.
Note: Always keep a copy of the Shockwave uninstaller and
current Shockwave .exe file in your Download folder in case you
need to refer to it again in the future.
Similar Messages
-
Flash player will not install and shockwave is enabled, what do I do?
Flash player will not install and shockwave is enabled what do I do.
You start by posting your operating system and browser here in a reply.
That way we know where to begin. -
Adobe Flash will not install on Windows 7 x64
Hello,
I find myself in a bit of a pickle, which I have neither definitive answer nor logic to why this is happening. Whenever I install Adobe Flash I get an error message in a popup window as described below.
Host
Unable to load application configuration
First of all I thought…? This can happen if the processor clock is out on the motherboard. I rebooted and checked the time and date stamp in the BIOS and it’s correct. Everything else works fine; it’s just Adobe Flash that is causing the problem. I am running Windows 7 x64 and selected Windows 7 x64 when I installed Flash. Shockwave, Air and all other Adobe applications were fine… it’s just Adobe Flash that is causing the problem. Any Answers would be appreciated; I’m left scratching my head with dismay because I cannot for the life of me know what is causing this error message.
It’s the same for MSIE9 as well it will not install and comes up with the same error message.
Thanks
[RESOLVED]
I took a second look at the BIOS and didn’t spot this the first time I looked. The time was correct, but out by 20 seconds which was the reason why updates and installations were in disarray. I never would have thought 20 seconds would have made much of a difference. But it does and I corrected the time to the precise seconds to pinpoint accuracy, saved the BIOS and loaded the OS and tried again and it worked first time.
So the moral of this topic is, if you’re getting a message in a window which says the following…
Host
Unable to load application configuration
Check the clock on your BIOS first, if the seconds are out but the time is correct, this the likelihood of the problem is being caused by the BIOS clock.What is the exact error you are getting?
Have you tried to run the offline installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment ?
If that still causes you an error please post your Windows version & edition.
P.S. if your Windows user account has administrative permissions, then you don't need to go into the BIOS to correct your clock; you can do it from withing Windows, either manually, or using Atomic Clock Sync. -
When I try to download adobe flash player everything goes fine and the download finishes. When asked to install I get a message that says it will not install while an application is running. Which is Mozilla Firefox
Adobe Shockwave Flash needs to install plugins for Firefox, and Flash needs to do that with Firefox closed. So close Firefox and run the Flash installer.
-
Adobe Flash Upgrade will not install after Firefox upgrade to 3.6.7
I upgraded to Firefox 3.6.7. After the upgrade I got a message that I needed to upgrade Adobe Flash due to security vulnerabilities. The Flash upgrade will not install. It simply sits and never installs no matter how long I wait.
== This happened ==
Just once or twiceThanks for your response. I have previously reviewed this. The only potential problem it seems to resolve is having 2 versions of Shockwave installed. I only have one. The only thing I can think of to do is just uninstall the one version and see if it will trigger an installation. When I go to the Flash install site, I agree to the terms and get the next screen that says download will start. I never get a message asking if it's ok to run or anything. No matter where I look for a download for Flash I wind up at the same place with the same problem. Any suggestions would be most appreciated.
Thanks -
I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.
Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
Please HelpI was able to solve this problem using the utility explained in this post:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
Thanks!
Dell Windows XP -
iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2 -
Quicktime will not install on my PC - also stopping iTunes from working
Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
I am using the latest installers for each and I can't understand why this is happening,
I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
Please help me fix this error where Quicktime can't install,
Thanks
JamesSays windows install package does not operate yet I can install other programs.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
The new ACR 5.5 update will not install in Elements 7.0
Hello All:
This situation is now becoming ridiculous (well, for me that is). I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0. I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
I have a Vista 64 Bit system with 12 Gigs of RAM. I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems. For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up. Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating. But as I mentioned, Elements 7.0 and Lightroom installed just fine.
The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install. It tells me that I do NOT have CS-4 installed so it cannot install. What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements? What gives?
Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)? Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore. Now they make it an 82 Meg install program and thus some of my problems.
Can anybody help here? Why does the install program look for CS-4, yet overlook Elements 7.0 completely. Helpppppppppp.
BenHi Benherrmann,
Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
Regards,
Ankush -
Java applet will not install in browser
My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window where is says installing.
Solved!
Go to Solution.
Attachments:
Capture.PNG 54 KBHow are you trying to install the java applet? Through a website? Calling an installer?
Could it be that the applet already installed on the computer?
Has it ever worked?
Applications Engineer
National Instruments
CLD Certified -
Macbook Pro SMC update 1.3 will not install
Greetings,
I am having problems getting the latest SMC update to install on my 15" Macbook pro. My built in drive has a boot camp partition, so I understand if the update won't install using that. But When booting off freshly GUID partitioned and HFS+(journaled) formatted Firewire 400 drive (Leopard installed and updated to 10.5.7) SMC 1.3 update will not install and gives same error "Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme." Huh?
I tried the update pushed down by software update, and a manual download.
Current SMC version showing in system profiler as 1.16f10
Anyone else experience this or have any suggestions?"...hit the hardware start button, get gong, machine starts to boot, something briefly flashes on the screen"
Hi Bob, you have to hold down the start button(5-10secs) until you hear a long tone. Then let go and everything is ok.
You'll also see the progress bar install the update, that is what the brief flash was but because the button wasn't held for a few seconds, it didn't take.
Message was edited by: musashi88
Maybe you are looking for
-
i have a macbook that was resantly upgrade we running Yosemite 10.9 OS and the external hard drive is fairly current brand name WD capacity 500GB with 147GB free lots of its contents are QuickTime Player videos that will like to open some other media
-
How to get the floor plan in Webdynpro component ?
Hi, How to get the floor plan in Webdynpro component ? Best Regards, Tripathi
-
Has anyone had an error message pop up about their i/o settings?
I tried recording a mixtape in GB and when I would get past a few minutes I would get an I/O error message. Has this happened to anyone else , and if so would you know why? Thanks
-
Is this like a hot spot/do i have to pay for service?
is this like a hot spot/do i have to pay for service?
-
I cannot print anything on line (receipts, receipies, etc) when I try I get the following error msg. Can anyone please help me ? AN ERROR HAS OCCURRED IN THE SCRIPT ON THIS PAGE Line 2126 Error No connection for Connection ID Code 0 URL