Shockwave Flash crashes getting more frequent every day

Shockwave flash crashes are increasing. Over 50 crashes in 5 days. Attached are the last 5 reports beginning with bp. Can anyone assist or give a direction to follow. Tried protection, accelerationand safemode suggestions . Help please
bp-1877d2c6-e744-427f-b608-2e89e2140506 5/5/2014 11:56 PM
bp-f23cb8d5-d14d-42a9-bc89-53c032140506 5/5/2014 11:49 PM
bp-7eda168d-01c1-44ff-be4a-136b42140506 5/5/2014 11:49 PM
bp-963032ce-23d0-471b-8a3f-973d82140505 5/5/2014 5:43 PM
bp-a3867cf0-b2e6-47e5-b75c-631402140505 5/5/2014 8:40 AM

Try to disable Protected Mode in Flash 11.3 and above by adding the line ProtectedMode=0 to the Flash "mms.cfg" file located in one of these locations: [46]
(Windows 32bit) C:\Windows\System32\Macromed\Flash
(Windows 64bit) C:\Windows\SysWOW64\Macromed\Flash
For example, on a Windows 7 64-bit system, open the C:\Windows\SysWOW64\Macromed\Flash folder, copy the file "mms.cfg" to the desktop, open it in Notepad, add a new line ProtectedMode=0 and then close Notepad, saving your changes. Next, go back to the C:\Windows\SysWOW64\Macromed\Flash folder, rename the original file to "mms.cfgBAK" (to save it as a backup) and then drag and drop in the modified "mms.cfg" file from the desktop. [47] [48] [49]
Note: To re-enable Flash Protected Mode, either restore a backup of the original mms.cfg file, if you saved one, or else re-edit the mms.cfg file to remove the ProtectedMode=0 line you added. Updating Flash Player or installing a newer version does not automatically re-enable Protected Mode

Similar Messages

Firefox crashes getting more frequent - maybe associated with Symantec PGP?

In January Firefox crashed 6 times. On 1/22 I did a full reinstall of Firefox. Did not crash again until 2/25 but then crashed 3 times in 4 days. In March has crashed 5 times in first 12 days. Don't know if crash report is simply blocked from occurring while my computer is locked, but most of the crash reports seem to be at whatever time I arrive in the morning and do the first unlock of the day. But not every day! This computer has full drive encryption with Symantec PGP. Maybe when locked, Firefox has problems? But why not every time it is locked? In the evenings I do the Windows locking but do not log off. The open pages vary.
Latest crash report is bp-7dee8df1-e410-4fb7-95ed-3bf252140312
I have disabled all of my add-ins.

'''''LAST RESORT ! ! '''''
''''' [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox]'''''
======================================
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Shockwave Flash Crashing! 10 times a day

Shockwave crashes all day long! Have updated reinstalled flash numerous times. Used CC cleaner..

http://kb.mozillazine.org/Flash#Plugin-container_issues
Maybe you should stop using CCleaner to clear Firefox data. It can cause problems. You can set it to ignore Firefox.

Shockwave flash crashing on IE Chrome Firefox

Ok i am having issues of playin games on facebook and watching videos on Livestream and even live preaching my IE freezes up once i click to watch and chrome tells me shockwave flash crashed this has started happening recently since i downloaded the new update never had this happen before please help i would love to watch and plays games again

I have been having the same issues with Google Chrome too. It usually happens when i have more than one website loading a Flash Animation. Also, I experienced a lot of crashes due to my computer's processing speed(it is pretty old).
What kind of computer do you have? Is your graphics card suitable to play high-rendered video games(you must understand that now flash animations are getting more complex and heavier in terms of size and dynamics)/. What is the latest version of your flash software?
Another thing I would do is not having three different browsers. I usually stick to one. Also check if you have any kind of software that might be blocking programs from executing(such as ad-blockers, anitivirus etc.).
Hope this information helps,
Vicente Tulliano.

What's the power of spending more time every day in your IT career ?

What's the power of spending more time every day in your IT career ?
When you do the research to find the factors of the successful people, you'll find that they ALWAYS spent a lot of time every day in their businesses.
The IT technologies change so fast and explode. The performance of IT people with 20 years experiences can be EASILY catched up by a IT people, maybe you, who has only 6 or 7 years or even less if you spend over 80 hours or even more every week on your job and on the latest technologies.
The reasons are listed below:
1. The out-of-date IT technologies is no use anymore. It's like the out-of-date IT books. The people with 20 years experience can't rely on his last experience any more.
2. If you spend 80 hours every week, you'll absorb doubled the knowledge and experience than the people who spends only 40 hours every week. You may catch up with him who has 20 years experiences with your 10 years experiences. Not only this, most of your knowledge and experiences are newer and useful than his.
3. Because you spend 80 hours, you have plenty of time to focus on your tasks. When the task comes in, you may finish your tasks many times faster than him and you may be the only person who still has the time to do any extra or urgent tasks. Because you have more time, you may prepare your next task to be ready to finish your next task even faster and you may absorb the latest IT technologies from a learner level to an expert level while other people is still doing his tasks. And due to your more spare time to learn the technologies all the time needed to do your task, you have much more knowledge needed to do your task and can finish your task much faster than others.
According to my experience, if the comparison of the knowledge the worker has is 1 to 5, the real hours needed to finish a task may be 1 to 10. In IT field, if you know how to do it, you need minutes, but if you don't know how to do it, you need months to do the error-try or starting to learn it and do it. Please notice that the knowledge can be used for many times and the 1 to 5 and 1 to 10 comparisons will repeat again and again. Without spending more time on getting more knowledge, the comparison of 1 to 10 is still happening.
4. Like trying to save the money, most of his 40 hours will be spent on his tasks. He may have only 5 hours left to learn new IT technologies. If you still need to spend the same time to finish your tasks like him, you still will have 45 hours to learn new technologies. You grow 9 times, 5 hours to 45 hours, faster than him. If you keep working and learning the new IT technologies 80 hours every week, you'll find that you'll need much less than 35 hours like him, you may have 60 or even more hours every week to do more tasks to get more experiences and to learn more latest technologies.
----- Someone asked me after read the above "You're absolutely right, but, what motivation can make people do that ?". I told him that "Don't ask me. Ask your boss" -----

1) LabVIEW is a graphical based programming environment and
LabWindows/CVI is a C based programming environment. Both can be used
for similar tasks. Users familiar with C may prefer CVI. LabVIEW is
typically easier to learn if you are unfamiliar with both.
2)
The Run-Time Engine is a separate component that can be installed to
execute LabWindows/CVI programs and LabVIEW programs. It is free of
charge for both LabVIEW and LabWindows/CVI.
3)
LabWindows/CVI does not convert any LabVIEW programs into C code.
LabVIEW programs are already compiled as you write them, so you won't
need to convert them to C to use them. You should see similar
performance in similar LabVIEW and CVI code.
Allen P.
NI

Shockwave Flash Crashing on Google Chrome

Anyone using Google Chrome and having problems with the Shockwave Flash crashing?? It's been happening to me for weeks and it's driving me nuts. Really don't want to stop using Chrome but I can't take this much longer... Any help would be greatly appreciated!

ADVANCED TROUBLESHOOTING.
Installation errors can manifest themselves in many different ways, including (but not limited to) the following:
A blank or flickering dialog box
A frozen cursor or screen
An error message such as, "An error occurred during the installation process. A required file is missing."
Different factors can cause installation errors, including problems with operating system components, conflicting start-up items, and hardware conflicts.To benefit most from this document, perform the tasks in order. Keep track of the tasks you perform and the results of each task, including errors or problematic behavior. Adobe Technical Support can use this information to better assist you, if you need to call.
Beginning troubleshooting
The tasks in this section can help you resolve the most common system errors. Before performing any of these tasks, back up all personal files (for example, Shockwave Player files you created). Always restart the computer after a system error occurs to refresh its memory. Continuing to work without restarting the computer may compound the problem.
1. Make sure that the system meets the minimum requirements for Shockwave Player.
Shockwave Player may not run correctly on a system that doesn't meet the following requirements:
PowerPC G4 or G5 or Mac Intel processor
Mac OS X 10.3, 10.4 or 10.5
128 MB of RAM
180 MB of available hard-disk space
Note: To check how much RAM is installed, choose About This Mac from the Apple menu. The Memory value indicates the amount of installed RAM.2. Reinstall Shockwave Player.
An incorrect installation can cause errors when you work in Shockwave Player. Reinstalling Shockwave Player can eliminate these errors.To reinstall Shockwave Player:
Move any personal files from the Shockwave Player folder on the hard disk to another location.
Delete the Shockwave Player folder on the hard disk.
Complete task 'command+option+escape' to force quit open applications. The task number may change; it should refer to the task above, "Run Shockwave Player while no other applications are running."
Double-click the installer file in the Shockwave Player folder on the desktop.
Follow the on-screen instructions to complete the installation.
Note: If you previously installed an update to Shockwave Player, then reinstall the update after you reinstall Shockwave Player.
3. Install Shockwave Player with the Login Items disabled for the user account.
To disable nonessential extensions located in the user accounts Login Items folder: Press Shift while you restart the computer. Pressing Shift disables any applications that are in the Login Items folder.
4. Log in as a user with administrator access privileges.
If you lack administrator access privileges, then Shockwave Player may be unable to install necessary files. To determine if limited privileges cause the problem, log in as a user with access privileges, and try to re-create the problem. If the problem doesn't recur, then the account you were previously using lacks access privileges. Contact your system administrator to grant you access privileges.To log in as a user with access privileges:
From the Apple menu, choose Log Out.
Click Log Out when the system returns the message "Are you sure you want to quit all applications and log out now?"
When the log in screen appears, select a user with access privileges, type the appropriate password, and then press Return.
5. Install Shockwave Player from within a new user account.
Occasionally, a user account can become corrupted and prevent the installer from accessing or creating the necessary files and folders. Create a new account, log in to the new account, and then try to install Shockwave Player.To create a new user account:
From the Apple menu, choose System Preferences.
Click Accounts.
Click the lock icon if it's closed, and log in to make changes.
Click the plus sign.
Create a new user account. Make sure to remember the new password and to give the account administrative privileges by selecting Allow User to Administer This Computer.
Click Create Account and close the Accounts window.
Choose Log Out from the Apple menu.
Log into the new user account.
6. Install Shockwave Player from the desktop.
Some system components--for example, device drivers and virus protection utilities--can conflict with the Shockwave Player installer and result in an incomplete or failed installation. To prevent these conflicts, install Shockwave Player from the desktop.
Copy the Shockwave Player folder to the desktop.
Open the Shockwave Player folder on the desktop.
Double-click the Setup file, and follow the on-screen instructions
7. Install current Mac OS X updates.
Updates to the Mac OS X operating system can improve its performance and compatibility with applications. You can obtain Mac OS X updates from the Apple website atwww.apple.com/downloads/macosx/, or choose Software Update from the Apple menu. For assistance installing updates, contact Apple technical support.Important: Before you install a system update, check the system requirements for Shockwave Player 11 (and any third-party software or hardware you may use with Shockwave Player) to ensure compatibility. If the update isn't listed,then contact Adobe or the manufacturer of your third-party software or hardware.
Intermediate troubleshooting
If the tasks in the previous section don't solve the problem, then try the following intermediate troubleshooting tasks.
8. Repair disk permissions by running Disk Utility.
If you log in to an account with administrator privileges, but are still unable to install or run Shockwave Player, then your disk permissions may be damaged.To repair your permissions using the Disk Utility:
Choose Go > Applications, open the Utilities folder, and then double-click Disk Utility.
Select the volume on which you want to install Shockwave Player, and then click Repair Disk Permissions.
Click the First Aid tab.
9. Optimize hard disks.
Installation or application errors can occur if the hard disk is very fragmented. Optimizing the hard disk rearranges files to minimize future fragmenting. It also restores fragmented files into single contiguous blocks, making hard disk space more accessible to the installer.Use a disk-optimizing utility, such as Symantec Norton Utilities, to optimize (defragment) each hard disk. For instructions on using a utility, refer to the documentation included with the utility.
10. Check hard disks for damage.
A damaged hard disk can cause installation errors. Check hard disks using a disk utility, such as Apple Disk Utility, Symantec Norton Utilities, or Micromat Drive 10.Disclaimer: Adobe doesn't support third-party disk utilities but provides the following instructions as a courtesy. For support, contact the developer of the disk utility.To check for damage by using Apple Disk Utility (included on the system CD):
Start the computer from the system CD.
Choose Installer > Open Disk Utility.
Select the disks to be checked, and then click the First Aid tab.
Click Repair to check and, if necessary, repair selected disks.
11. Remove fonts from the Fonts folder in the Library folder before installing Shockwave Player.
Drag all fonts from the Fonts folder in the Library folder to a new folder on the desktop.
Restart the computer.
Install Shockwave Player.
Move all fonts back to the Fonts folder in the Library folder after installation is complete.
12. Scan for viruses.
Use current anti-virus software, such as McAfee Virex or Symantec Norton AntiVirus, to check the system for viruses. Make sure that you have the latest virus definitions for the anti-virus software you use. Although virus infections are rare, they can cause unexpected system behavior, including installation errors. Running virus-detection software regularly (for example, daily) prevents viruses from damaging software on the system. For instructions on running or obtaining the latest updates to the virus-detection software, refer to its documentation.

Shockwave flash crashes on my chromebook when trying to watch a show

same prob on my CB completely frustrated

Out of the blue my shockwave flash crashes when trying to watch a show on xfinity using my chromebook. I have done the following with no results: reset cache, cookiesreset flash websiteshard reset chromebookpowerwashed chromebookdeleted Flash licensesReset settingsBrowsed as a guestI only have 1 version of Flash on my chromebook I'm out of ideas.

Shockwave Flash Crashes

Shockwave Flash crashes when I try to watch youtube
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.9 (KHTML, like Gecko) Chrome/6.0.402.0 Safari/533.9

I'm having the same problem. Got to go to programs, and select Firefox and select start in safe mode and remove all add -on.

Shockwave flash crashes firefox every time I log on!!HELP HAVE TRIEDed

I log on shockwave flash comes up in tiny window firefox crashes this has been going on or months If not fixed I will leave firefox even though I like it

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Shockwave Flash crashing.

I keep getting the same error message constantly not allowing me to accomplish any work. It says Shockwave Flash may be busy or unresponsive and I have the choice between waiting to see if it responds or to stop script. I have to stop script everytime though otherwise my entire browser feezes. Someone please tell me how to fix this so I can get back to work. I use the current version of Mozilla and everything else looks up to date so I really do not kow what to do. I have tried resetting Mozilla, downloading Adobe and Mozilla again, ran every scan I can think of, watched the movie Hackers because I got bored and I need to get some work done.

I had this problem repeatedly over the past month on my Windows 7 desktop. I removed and re-installed the Adobe Flash plugin several times, to no effect.
Last week, I checked my other Firefox plugins and noticed a Microsoft Media Player plugin and a Microsoft Silverlight plugin. I uninstalled both of these programs, removed both plugins from the Firefox plugins tab, and then restarted the computer. No more crashes!
Today, I re-installed MS Silverlight as a test (because Windows Update kept asking me to), and sure enough, Flash started crashing again. So, I uninstalled Silverlight, removed the Silverlight plugin, and restarted Firefox. Problem solved again! ;-)

Shockwave Flash Crash

I'm having problem with the Adobe Flash Player Plugin as it crashes every time I try to open YouTube, Vimeo or any other flash based videos on the web. I get,
"The following plug-in has crashed: Shockwave Flash" in Google Chrome and Chromium.
On Google Chrome both the Flash Plugin crashes in the same way..
Follow image posting rules - Inxsible
1) Name: Shockwave Flash
Version: 11.1 r102
Location: /opt/google/chrome/libgcflashplayer.so
2) Name: Shockwave Flash
Version: 11.1 r102
Location: /usr/lib/mozilla/plugins/libflashplayer.so
And it also crashes in latest Mozilla Firefox from pacman. I have attached screenshots of the crashes.
Follow image posting rules - Inxsible
I have installed the latest flashplugin-11.1.102.55-1 from pacman.
I am running.
Linux ujjwol 3.1.5-1-ARCH #1 SMP PREEMPT Sun Dec 11 06:26:14 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
Last edited by Inxsible (2012-01-02 15:33:15)

you should go do some search b4 asking, there're many way adobe flash player sucks....dont just ask
there's a /etc/mms.cfg , you may want to take a look.
i also recommend gnash over adobe for youtube, since it has like full support for vdpau, opengl
you can also cclive and play it with mplayer.

Casio Brigade rebooting in the middle of calls and getting more frequent.

My Casio Brigade reboots in the middle of calls. It was usually preceded by a humming noise but it is happening more frequently and no longer hums just reboots. The battery is fine and has a normal life. The phone has never been dropped or wet (the Brigade is supposed to withstand both anyway). No, I do not have access to another phone so Verizon can tell me to reset it. I already reset and it didn't help. I programmed it again yesterday so it is up-to-date. Only reboots during calls (for now). Occasional dropped calls are expected but rebooting is not acceptable!
Can anyone help?

It is an awesome phone....if it worked right. I love the keyboard and the ruggedness of this phone. If only it wouldn't reboot in the middle of calls and/or Verizon had a solution that worked. It had this problem since day one and they had me reset it several times. It was OK for awhile. Then it started again but infrequently so I just lived with it. But now, it was every other call. I tried resetting it again several times and it is now out of warranty, of course. The last tech guy told me to uninstall all of the programs like navigator and backup assistant and THEN reset it. But it wouldn't let me remove backup assistant.
Anyway, I am back on my old phone that I only stopped using because of the poor sound quality. But, I guess I'll have to live with it until my contact for the other phone is up. ... NEXT JUNE. I believe this to be a software issue.. The phone itself is probably great. Good luck.
Oh, I also learned that it is more prudent to buy an unlocked dual-mode phone that accommodates both GSM and CDMA so that your phone will be usable if you decide to switch to another carrier. Verizon is about the only one using CDMA now. If you want a Verizon phone, get one that is "global ready". They have both modes. Hope it helps...

Adobe Flash Player / Shockwave Flash Crashing

Adobe Flash and Shockwave Flash are crashing several times a day on my computer. Windows 8.1 and firefox v 34.0.
I can recreate the issue sometimes by right clicking on flash media, which will lock up my browser for several seconds and then cause a crash.
Can anyone give me some suggestions for where to start troubleshooting this issue?
Thank you,
Bruce

I've seen a lot of stability reports around Windows 8, Firefox and Flash Player.
Both Google Chrome and Internet Explorer have invested heavily in bringing a highly tuned experience and modern plug-in interfaces to Windows 8. Improving plug-in support is not a priority for Firefox, and although we continue to address stability issue where they make sense, most of what I'm seeing are generic crashes and hangs that boil down into the fundamental inefficiency in retrofitting a modern sandboxing approach necessary to protect users in today's security landscape with a plugin architecture from the 1990s.
While I'm more than happy to take a look at your crash reports, I'm pretty sure that this is the conclusion we'll arrive at based on the last several folks I've talked to about this.

How to fix, shockwave flash crashes (a lot)

Hi
What to do...
I have Vista ultimate and Firefox.
Two days ago Shockwave flash started crashing (the popup said it had stopped working). When the plugin crashes it freezes Firefox and the plugin crashed so often that in order to use Firefox I have had to completely disable Shockwave.
I have tried reinstalling the Shockwave plugin but no improvement. I never realized how much web content uses Shockwave flash...
The plugin crashes on practically everything that's it would be involved in running (except Utube, that works, I don't know if the plugin is involved in playing utube videos).
Any and all suggestions are appreciated...
Regards
Bob

Please ask your question on a forum for the Flash Player

Shockwave flash crashed

during playing games shockwave flash has crashed.... and it crashes all the time...

Read Before Posting: How To Get A Useful Answer To Your Question

Shockwave Flash crashes getting more frequent every day

Similar Messages

Maybe you are looking for