Shockwave flash file shows on print spooler, having printer problems, could this be cause?

Having printer problems. Shockwave flash file shows on print spooler, should it? Could this be part of problem?

Please ask your question on a forum for the Flash Player

Similar Messages

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US

For everyone having memory problems with this board

I have been working on my memory problems with this board. Memtest failed every pass yet memory was fine and board was fine. Was using Kingstone Value Ram
Set bios version back to 1.7
set preformance to fast
set memory to
2.5
4
4
8
Set voltage to 2.7 if that does not work go to 2.75
now working great no more blue screens or os getting corupt it seems to run like a charm
Thanks to the people who have posted sefull iformation even know you have to dig deep to find it.

i was having mem problems with this board. But i set up bios v2.2 - ram voltage 2.75 - performance mode: slow and ram timing by SPD.
Seems to work great for me but my video card is messed up so my comp dies every ones in a while.

Flash file showing up twice in some browsers

I am using a xhtml strict doc and for the life of me cannot
seem to insert my flash file so that it shows once in every browser
and validates right. This validates even though it shows the flash
movie twice in ie and opera.
Anyone have an idea on how this can be fixed to show once and
still validate?

Flash embed/object code doesn't validate. It is not W3C
recognized and
never was. Either accept it and move on. Or, have a look at
the Satay Flash
method here:
http://www.alistapart.com/articles/flashsatay
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"rtreitner" <[email protected]> wrote in
message
news:g89eb6$7bl$[email protected]..
> I have tried adding in noscript tags around the object
ones and while it
worked right, it won't validate because of the object tags.

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page (I turn Shockwave Flash on only to see videos - having it off prevents screen freezing - and so I want it stay at the top of the list)?

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page? I turn Shockwave Flash on only when I want to watch a video and then turn it off to prevent screen freezing, and so I want it to PUT it and KEEP it at the top of the list.

Hit Ctrl+0 (That's a zero, by the way). I'm not sure if it will work, but hey, that's the first thing I would try.

Shockwave flash keeps crashing how can i fix thos problem so i can play games

my shockwave flash keeps crashing how can i fix this

Start by searching on a forum for the Flash Player. If you can't find an answer then post a question there, including browser and OS details

HP Laserjet P1008 printer is having many problems

The Printer has the following problems: 1) HP Claims that in single cartridge (Toner) 1500 pages should be printed but in actual it only prints 900-1000 Pages in one Toner. 2) Dull Printing is observed in the middle part of paper. 3) Tooks about 1-2 minutes to take Papers from TRAY(While Printing multiple Papers) 4) Printer Roller Rolls continuously and printer is not switched off from Power Button Provided in Printer. System Officer, Allahabad District Court

I'm glad you finally succeeded. Your post was one I looked at trying to solve the same problem. But the drivers weren't visible for me after rebooting.
I spent 2 days trying to make my LJ 2100 TN work with OS 10.8.2. The kicker was that when I tried to add the printer to my existing [ethernet] network with my new iMac on Wi-Fi it killed the existing network. No computer could now print! I could still get on-line though.
I did a lot of research on the net; I called my ISP and did learn how to get the IP numbers on each device; I called Mac Tec, they passed the buck, saying because I wasn't using a Mac router they couldn't help.
This post is for others that can't see the drivers they just downloaded. I solved my problem today:
When I tried to add the printer to 'Print & Scan' the 'Add' window comes up; and even though I made the 2.12 download, there were no print drivers to be seen. Apple in it's infinite wisdom left out the 'Advanced' icon in the 'Add' window! Right click the header and add it. Now there is a function to actually search for the print drivers.
You will have to choose 'Type'. I tried a few but 'Jetdirect' worked best for me. NOTE: your printer should be on before you make your choices in the 'Add' window.
Add your printer's IP number in the 'URL' field.
In the 'Use' field, select your proper print driver.
If you did it all correctly, the 'Add' button will light up and hopefully add a new printer to the 'Print & Scan' window.
Good luck. [I also had the delete and replace the printer on my other 2 computers in the network to make them able to print again.]

My iChat buddies dont show up and also having login problems.

I am having two problems with my ichat. My buddies dont sign online and I also experience the login problem where it opens and collapses many times and says that I have tried to logon too many times. Please help. I have searched this message board and thus far nothing that I have found has worked

Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443(press return/enter(you might have to tick and untick SSL for 443 to stick)).
Log back in again.

DVD from multiple flash files shows "loading" across 8/600 swf files

I got tossed into the middle of editing a training dvd that is composed of several swf files. I've made minor edits to content (spelling, grammer, etc), when I re-burn the dvd there are 8 files that display "loading" in blue upon opening (all files do this throughout the dvd) but with these particular files it never goes away. It remains on the screen and visible underneath or behind the text. Nearly 2 months ago, a round of edits was necessary and these same 8 files behaved normally. Three of the eight files were not edited in either round, were fine on the last burn, and are now displaying the "loading" constantly. Would anyone have any suggestions to fix this?

The DVD is throwing a bit of a twist into it. I'm assuming you mean data DVD first off and this is all executable projector based content?
The best thing you can do to start is play the content in the Flash IDE so the debugger has a chance to show you any errors. Load the project and then run the debugger (CTRL/CMD + SHIFT + ENTER) and let us know if you see any errors show up. Chances are you're hitting a snag and it's no longer running code properly.

Anyone else having a problem like this with the order...

Like the rest of the world, I got up extra early to order our 2 new Iphones. I got a confirmation number but have yet to receive any email about the order. I have called Verizon a hundred times and they do not see my order. Everyone tells me "oh you have a confirmation number so you will be fine". I check endlessly the status of my order but it doesn't show anything there at all. The last girl I talked to said oh well your order may not have gone thru but we don't know. If you don't get a notification by the 9th then go online and pre-order again. I really do not want to be charged 2x $400 and get 4 phones. Anyone else out there having this problem?

Well just to update in case anyone wanted to know. Finally got someone at Verizon who said that the order did not go thru. I place another order on 2/9 at 3am and everything is going good now. They said the system went down on the 3rd for a short period of time.

I have three programs I would like to uninstall from my apple pro , also I am trying to install skype but having great problems with this to Marie

Hello, I have three programs I would like to delete and uninstall from my apple pro , plus I cant seem to install skype for some reason,as we are going to be traveling around Australia soon I would like to keep in touch with family and friends. I would be most thankfull for your help
Regards Marie

Hi Marie
Can you please describe what happens when you try to install Skype? I've found one common issue people have is that they don't actually fully install it - a lot of people download it, open the downloaded image, and run it from there - and dont actually ever copy it to their Applications folder, so next time they look for it, it can't be opened. Try again from scratch - go to the Skype website, download the file, if it doesn't automatically display the Skype disk image on your Desktop, go to your Downloads folder, locate the Skype download and double-click it to open, then, open a new Finder window and drag the Skype application from inside the disk image to your Applications folder. Once that's done you can trash the disk image. Go to your Applications folder, find Skype and launch it. Let me know if you get stuck.
As John says, it would be very helpful to know exactly which Mac you have. If its a laptop, you probably have a MacBook Pro, not a Mac Pro, which is a very large, heavy silver box and not amenable to being dragged around Australia!
Matt

Having a problem with this code

a buddy of mine is teaching me some java, and im doing ap roject in which i have to set up a loop that will take an inputed script a b c or d, and convert it to a price, then add up the prices together, using up to 10 variables, this is what i got so far and im having trouble finishing it, also getting errors on the lines with total, any help would be appreciated
package projectloop;
import java.util.Scanner;
public class Main {
public static void main(String[] args) {
String input = new String();
Scanner in = new Scanner(System.in);
for(int i=0;i<10;i++){
System.out.println("item");
String s = in.next();
if(s.equals("a"))total=9.95;
if(s.equals("b"))total[i]=19.95;
if(s.equals("c"))total[i]=29.95;
if(s.equals("d"))total[i]=39.95;

Comments embedded
themanofstainlesssteel wrote:
package projectloop;
import java.util.Scanner;
public class Main {
public static void main(String[] args) {
String input = new String(); // You never use the "input" String reference variable
Scanner in = new Scanner(System.in);
for(int i=0;i<10;i++){
System.out.println("item");
String s = in.next();
if(s.equals("a"))total=9.95; // you never declared the "total" array
if(s.equals("b"))total[i]=19.95;
if(s.equals("c"))total[i]=29.95;
if(s.equals("d"))total[i]=39.95;
You never do any addition.
I also recommend using prices in cents.

Bioshd2..i have been having a problem with this bioshd2 error..no drivers detected..

The comp is an hp 6530f.the first time the prob occured was when my dad unpluged the computer from the surge protecter..upon restart,it just says boot failure insert system disc and press enter.when the comp..was orriginally purchased there was no recovery disc and i never made one.when i do a diagnistic it says bioshd2 error no drivers are detected..i tried changing bios settings and a few other things and nothing.so i turned the comp off and the next day turned it on and it booted up normally.the comp worked fine for about a week then one day my dad moved the comp a few inches to check somthinig behind it when the comp suddenly started to shut down by itself..and when i tried to turn it back on, i got the same thing. bioshd2..idont think my hd is bad because it came back on but what could be causing this problem..i tried alot of different things, even taking the battery out for 12 hours to reset bios and nothing..i left it alone for about a week and when it was turned on again it booted normally.now it is working but im afraid of it happening again..ive looked at all of the wires in the comp and dont see any faulty wires..i checked the power supply because when my dad moved it it shut off so i figured it was that but power seems to be working fine.ive been trying to perminetly fix the problem for weeks now and i dont know what else to check..any help would be awsome thanks.

If the motherboard is touching the case it could cause problems. A short in a wire could cause problems as well.
I don't want to say toss the computer around to see if it happens again, but unfortunately it's one of those things that you might not discover it happens again for another month. At that point you can start with changing out the cabling, it's a rather cheap inexpensive fix, then inspect the motherboard, look to see if there is any point where the board could be making contact with the case.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

I have never used my mac for desktop publishing before and am having some problems. This sounds really dumb, but I can't figure out how to put a border around a text box. Also, how do you edit the border, i.e. border color, thickness, etc. Help!

I have never used my mac for desktop publishing before and am running into some real problems. How do you put a border around a text box? Can you edit the border - color, thickness, etc.? Help!

I think the best solution is to read Pages documentation, go to Help and you have a long list of options. Pages is capable of quite sophisticated things, some features are above Nisus or Mellel, so it is not so simple to summarize things in a few lines.

Shockwave flash file shows on print spooler, having printer problems, could this be cause?

Similar Messages

Maybe you are looking for