Shockwave problem in Chrome after update

Sorry if this is in the wrong section or has been asnswered before but...
Shockwave was updated to 11.6.602.180 on a Win7 System running Chrome 26.0.1410.43.M
When using a game that uses Shockwave where my mouse points when I click
does not correspond with the action initiated.
There seems to be about a centimetre or two offset (cursor lower)
on a 19inch screen woth chrome zoon set to 100%
The update has not affected Firefox in the same way.

I have found out that it is a chrome problem in combination with the adobe flash player ( not with chrome own pepperFlash ) with the latest chrome update that has to do with the way it handles the wmode option for swf files. So we have to wait for the next chrome update and hope that they will fix it.
In the mean time I have installed Chrome Canary , that's a developer version of the latest chrome so it's possible that you run into other problems, I haven't found any so far.
So installed Chrome Canary, disabled the pepperflash and enabled the adobe flash in chrome://plugins and everything is running fine again.
Hope this will help others.
Peter

Similar Messages

HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum.

HT5935 Does any one have problem in FaceTime after updating to iOS 7

Does any one have problem in FaceTime after updating to iOS 7

No, none whatsoever. If you would describe your issue, someone may be able to assist.

I am having problem with iMessage after updating my 5s to iOS 8.0.2

I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D.

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Problem loading pages after update to Firefox 36

After updating from Firefox 35.0.1 to version 36, I am unable to load any pages in Firefox. (My internet connection is fine and I can use other browsers on the same computer.)
I've already tried many troubleshooting routines to fix the problem but none have worked. I've tried the instructions here:
https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating
(including troubleshooting my Firewall and proxy settings)
and here:
https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
I've also tried the more general and extensive troubleshooting here:
https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems
NONE of the suggestions in any of those pages solved the problem. Opening Firefox is Safe Mode did not help either. I was unable to load pages even in Safe Mode.
After following all of the steps in all of those troubleshooting guides and still failing, I uninstalled Firefox completely. (I followed all official directions on how to uninstall.) Then I re-installed Firefox VERSION 35.0.1. Firefox again worked fine with the older version.
Then I restored my profile from a backup using MozBackup. (My most recent backup was done when I had Ver. 35.0.1 installed.) Everything was still fine; Firefox worked fine and all of my settings were back to my preferences.
Finally, I again tried to update to version 36 - and the same thing happened! Unable to load any pages!
One other thing I've noticed: With version 36 installed, there is something wrong with my Options dialog. The first time I upgraded, I had only blank tabs for "General" and "Advanced"; with my second try, after updating to V 36 my Options dialog has blank tabs for "General" and "Search" (although Advanced is now showing.)
I am going to uninstall again, and again go back to V 35.0.1. But I would like to be able to update to the newest version. What can I do?
(I am a long-time Firefox user, and reasonably computer savvy. I have many extensions installed as I use Firefox as an important tool in my job as a website designer. I have Firefox extensively fine-tuned to my liking to optimize my work-flow.)
Any help appreciated!

Your message seems to have covered all the normal things we check.
When you tried using v36, did you have any add-ons? Have you tried;
'''https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles'''
'''Windows: 32-bit''' C:\Program Files\Mozilla Firefox\firefox.exe -p
'''64-bit''' C:\Program Files (x86)\Mozilla Firefox\firefox.exe -p
'''Mac:''' Navigate to '''/Applications/Utilities.''' Open the Terminal application.
In the Terminal application, enter the following:
/Applications/Firefox.app/Contents/MacOS/firefox-bin -p
'''Linux:''' In '''Terminal''' run: firefox –P
For users who have one or more builds from mozilla.org this will not work.
It would be best to have the full path so if you had placed the untared contents
in a folder in /home it would be /home/<username>/foldername/firefox/firefox –P
An easy way would be not to do it in a terminal but in say a launcher since
you have to point it to the firefox script in Firefox folder you can then add –P
on end. You can also have the exact "profilename" after the -P so Firefox
will start with that Profile.

Problems on ipad2 after updating to latest os8 version, getting sync to itunes error

problems on ipad2 after updating to latest os8 version, getting sync to itunes error..help pls

What happens when you save the attachment to disk and open it with Word?

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1I have already done "Reset Network many times. I have switched off and on my router multiple times. No luck.

Hi vpraghu,
If you are having an issue with connecting to a Wi-Fi network with your iPhone, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Problem with sound after update

Hello
After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
My os: Windows 7 x64. Sound card Creative X-fi.

Hello!
My problem is summed up in this topic.
Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
I hope for a sollution soon.
Thank you.
*edit*
Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
I personally use Chrome and this is for this browser:
1. Type "about:plugins" w/o the quotation in the navigation bar.
2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
Flash (3 files) - Version: 11,3,300,257
Shockwave Flash 11.3 r300
Name: Shockwave Flash
Description: Shockwave Flash 11.3 r300
Version: 11,3,300,257
3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
4. Simply disable the lates version 11.3 and enable the previous version 11.2
I hope this helps.
Message was edited by: AndrewPAM

Problems with Gband after updating to iTUnes 7 and Quicktime

Garageband has bee acting strange ever since the update and sometimes tracks freeze and it goes into a repeat which won't stop until I use the power button to shut down the computer. I am having multiple application problems since the forced update to iTunes 7. Anyone else having issues?

many times in the past, a quicktime and/or iTunes update has caused some weird stuff. Did you repair permissions after the update? Sometimes that will clear it up. Other times, many folks have gone back to the previous versions until a fix was found.

Problem with iphone after update

Hey guys, I am having a bit of bother with my iphone. Basically i was given an iphone 3g and I'm not really sure where it came from but it had a vodafone sim, I am on an orange contract so i took out the vodafone sim and put the orange one in and to my surprise it worked, it has been working fine for months but tonight I decided to do an update on itunes and now it is telling me that the "sim card in this phone does not appear to be supported" and and my phone is stuck on a screen with the usb cord and the itunes logo telling me to connect it, also i can only make emergency calls. What on earth have i done? I no longer have the original sim so cant use that to activate it
Is there any way to fix this? I had no idea doing an update would cause this trouble and atm my phone is useless.
Any help would be very much appreciated,
Cheers
Tors,

The problem also appeared for some people after updating to 7.0, and for some after updating to 6.1.3, or 6.1.2, or to 5.1, 5.0, etc. and some first saw it without updating at all. Which argues against it being a software problem with 7.1 specifically.
Restore your phone using iTunes and set it up as a new phone. It you still have the problem it is a hardware failure.

Problem with GNOME3 after update

Hi,
I have used gnome3 about 3 week ago, but after my last update I have some problems.
I use 2 monitors (notebook and external). When I have external monitor connected gdm will crashes. I can see only black screen after gdm is started. But when I have external monitor disconected gdm runs normalI can connect external monitor before login or after login and it is still ok. Before update it was ok.
Seccond: when I click shut down at gnome3, gnome is comming down but system not. Monitors has no signal (graphic output is switch off) but notebook is still switch on. Only squeeze switch off button is help me. Before update it was ok.

After update
After what update? We're not mind readers.

Problem accessing account after update

After updating my ipod, i can no longer access my itunes account. Why?

Just what are you try to do?
What happens when you do that?
What iOS did you update to?
Maybe:
http://www.digitaltrends.com/mobile/ios-7-problems/

Problem with camera after updating z1 to 14.5.A.0.270

Hello
I'm facing a problem after updating my Xperia Z1 to 14.5.A.0.27, I.e. Lollipop 5.0.2.. problem is with the camera, when I tried to capture a picture with auto flash/flash on, a bright light is appearing on the lower portion of the image. Plz help to overcome this.. Thnx in advance
Solved!
Go to Solution.

Ca you please test the same pictures with flash and without the case?
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

[SOLVED] Problem w/ lxdream after updating/reinstalling OS.

Hi,
Yesterday I've made update on OS and then I've got Kernel panic... So I've recovered data and reinstalled OS (it was the best option for me, because previous system was such a mess). After installing OS I've compiled by myself lxdream and after copying 'bios data' to ~/.lxdream it gaves me "Illegal instruction" ("Bledna instrukcja" in polish). So, I've tried compiling from the AUR and I've got this same result. Before update/reinstall everything was working ok. This is from 'gdb lxdream' and typing 'run':
Starting program: /(path_to)/lxdream
[Thread debugging using libthread_db enabled]
[New Thread 0xb3357b70 (LWP 1745)]
ALSA lib pcm.c:7236:(snd_pcm_recover) underrun occured
Program received signal SIGILL, Illegal instruction.
0x0809547f in gl_reset_state () at drivers/video_gl.c:36
36 glOrtho( 0, video_width, video_height, 0, 0, 65535 );
(gdb) _
My system spec:
AMD Athlon 2000+ (1.6GHZ)
512MB RAM in one DDR module (Kingston)
80GB HDD PATA (Segate)
Nvidia GeForce FX 5500 AGP (w/ using nvidia-96xx)
Creative SB16 listed by lspci as Ensoniq 5880B
I'm using xorg-server 1.7.5.902-1 and nvidia-96xx/nvidia-96xx-utils.
It's not bug in alsa, because on previous install I've got alsa underrun occured and everything was working ok. Also it have other optional audio drivers (alsa,esd,sdl,null). Even on 'null' it's not working.
I don't know what a problem is with lxdream, because previously it was working ok with the same drivers and 3rd party applications/libraries.
It looks that some package after update have broken compatibility. I need this emu, because it's needed for me for Homebrew Development.
I'll test lxdream on second PC with similiar specs, that have ArchLinux slightly outdated.
It's my first post and sorry for my English, I'm Polish.
Thanks a lot.
// it works okay on second (not mine) pc, it has xorg-server 1.7.5.901 and open source ati radeon drivers (called 'radeon'), I don't know if that helps, if I would know how to debug it...
Update:
It looks that it's ia gtk or gl/glx bug, because when I comment this line 'glOrtho( 0, video_width, video_height, 0, 0, 65535 );' it runs, but when I get cursor over GL display it will crash with:
Program received signal SIGILL, Illegal instruction.
on_video_window_mouse_motion (widget=0xadff940, event=0xae03c18,
user_data=0xae94600) at gtkui/gtk_win.c:133
133 int x = (int)event->x;
So it's looks that it is a GL/GLX or GTK bug. On that PC gtk version is 2.18.7, mine is 2.20.0.
Update:
I think, that it is a GTK 2.20.0 related problem...
Update:
Marked with 'SOLVED' flag in the subject.
Last edited by XionKH10 (2010-04-06 09:35:48)

Here you go:
mail:~ dude$ ls -l /var/clamav/
total 14736
-rw-r--r-- 1 clamav clamav 610351 Nov 30 03:44 daily.cvd
-rw-rw---- 1 clamav clamav 2 Nov 29 21:44 freshclam.pid
-rw-r--r-- 1 clamav clamav 6924820 Nov 3 16:31 main.cvd
and when I do the following:
mail:~ admin$ ls -l /var/amavis/
ls: : Permission denied
So I tried the same command as root:
mail:~ dude$ ls -l /var/amavis/
ls: : Permission denied
mail:~ dude$ sudo ls -l /var/amavis/
Password:
total 24
lrwxr-xr-x 1 root clamav 33 Aug 12 10:38 .spamassassin -> /private/var/clamav/.spamassassin
drwxr-x--- 4 clamav clamav 136 Sep 11 13:05 amavis-20060911T130530-11951
drwxr-x--- 4 clamav clamav 136 Sep 11 13:26 amavis-20060911T132643-12041
drwxr-x--- 4 clamav clamav 136 Nov 30 11:46 amavis-20061130T114636-17606
drwxr-x--- 4 clamav clamav 136 Nov 30 11:49 amavis-20061130T114901-17679
-rw-r----- 1 clamav clamav 0 Apr 12 2006 amavisd.lock
-rw-r----- 1 clamav clamav 3 Nov 29 21:44 amavisd.pid
srwxr-x--- 1 clamav clamav 0 Nov 29 21:44 amavisd.sock
-rw-r--r-- 1 clamav clamav 3 Mar 20 2005 whitelist_sender
I see something odd with the symlink in the first row. Is this the problem? If so, then how would I fix it?

Shockwave problem in Chrome after update

Similar Messages

Maybe you are looking for