Shockwave wont work for a thing using Shockwave.

Hi, I recently downloaded shockwave And i play a Habbo retro located at: http://streetrp.info/client I go to it and it says: "This shockwave movie has error's that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue" So i went to go to my add/remove programes to remove it and re-download it and it isnt on my Add/Remove Programmes list!!?!? So im stuck with this forever.
It doesnt just do it with Streetrp.info/client it also does it with http://habbarp.dyndns.org/client and the same with http://deathrp.zapto.org/client
Please help me out here, Ive always playd the link's above and im not having Adobe's Poor Quality programmes effect it!,
I cant go on anything with shockwave now.
ILL NEVER RECOMMEND ADOBE SHOCKWAVE TO A FRIEND, THE QUALITY IS AWFULL,
GUY'S READING THIS.. DONT USE SHOCKWAVE BECAUSE THIS MIGHT HAPPEN TO YOU ;/

Thanks for the advice, Niel. Interestingly enough, the Unit Converter had not created a plist file. I did try you suggestion of dragging all the widget plist files to the desktop, but the Unit Converter still didn't work.
But I have now found the solution. The problem was being caused by a custom number format that I had inherited from the Panther installation. In Tiger it's impossible to set a custom number format - the number format is set automatically for each region and it's impossible to change it. But it was possible to set a custom number format in Panther and it is recognized by Tiger. So I can either keep using my custom number format, in which case Unit Converter won't work, or set one of the standard number formats, in which case Unit Converter works (I see that now it actually launches, it has also created its plist file: eveidently the file didn't exist before because the widget had never got as far as creating it).
I think it's very bad that Apple removed the custom number format feature. And since the old custom number format from Panther was recognized by the new system, it's also bad that this widget doesn't work with it.
But at least I've found the solution to my own problem!

Similar Messages

Quicktime help, wont work for some things

ok, so I can view videos just fine on quicktime.com and such, however I am a filmmaker and i put my videos on such sites as vMix.com, and Myspace, however all that comes up with my vidoe is the Quicktime Q logo with a ? in the middle of it. All my friends say they can view it fine, but I cant view it at all. Ive tried uninstalling and reinstalling but that didnt do anything. Help would be greatly appreciated

Not all media formats can be viewed by all players or plug-ins. The vMix pages appear to be using Flash (.swf) formats.
Download and install Flash Player for your PC (free).
It may already be installed, however, and you have set the QT plug-in to try and open this format. Easy fix.
Open the QuickTime Control Panel and look for the tab that allows you to edit the "MIME Settings". Remove the check mark for Flash Media and quit and relaunch your browser for these changes to take effect. Try the page again and the Flash Player plug-in should display the file.

TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

They are not a supported carrier. You'll have to take it up with them.

I installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank

i installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank- does anyone knw how to fix this?

Looks like blame is incorrectly placed. Turns out my iSCSI connector is struggling with Mavericks. When I placed the iTunes library on a local drive, everything came back to normal.

When I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

when I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

Hi ljzimprich!
To have a better understanding of your issue, please let everyone know which model printer you own and what operating system you are connecting it to. That way, community will be able to assist you with suggestions appropriate for your product.
Thanks!

Facebook apps wont work for my iphone 4 please help

facebook apps wont work for my iphone 4 please help

Ok, what you have here is a basic 'blown fuse' problem.
With the iPhone 3G and 3GS if you drop them in water and they stop working you can almost always revive the phone simply by oepning them up, finding the corrosion on the motherboard then cleaning it and putting it back together.
With the iPhone 4 (and 4S) it's a different story though in that water damage causes a fuse on the motherboard to blow. Once blown, the phones can no longer receive power from the battery. They can however receive power from a wall charger, which is why your phone runs whilst plugged into a charger but dies as soon as it's disconnected. Trying to run it from a USB port wont work either as the 5V power supply gets interupted whilst the phone is booting, as such it dies part way through booting, and the cycle repeats.
At this stage you have 3 options:
-have the phone replaced by Apple, or
-replace the damaged fuse on the iPhone motherboard yourself, or
-send the phone to a company to have the fuse repaired
There is a company that sells the replacement components, and they have an installation sevice too. I've fixed a couple of iPhones in my day, and unless you are very proficent with a soldering iron I strongly recommend having the repair done for you.
See the link below:
http://fonefixer.webs.com/apps/webstore/products/show/2684671
Sorry it's not good news, but at least you know what's going on with the phone now and can weigh up your options.

Updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

I called Vodafone corporate help desk as I have a company phone :-
I was told to hold down the off button at the top of the handset at the same time as holding down the round menu button at the bottom of the handset for 20 seconds - the phone went off, then restarted and it all seems OK now.
Def something with the ios 6.1.2 upgrade :-((

HT2499 my dvd player on my mac wont work for any dvds any ideas

my dvd player on mac wont play dvds - never really used it, other than for software updates? does this thing fail often

Do other DVDs load?
CD/DVD Loading Problems
CD/DVD Drive - Troubleshooting
CD/DVD Drive - Troubleshooting (2)

Recovery Disk wont work for new Hard drive.

I have a HP Pavilion dv5-2132dx with windows 7 64-bit. Recently a message started popping up warning that the hard drive might fail and I need to back up my data. I decided to buy a new hard drive. The hard drive a bought is 320GB SATA 7200RPM by western digital. It is the same brand and model as the hard drive currently in the computer. I popped in the new hard drive and inserted the recovery disks I bought from HP. The computer goes through the whole process of istalling the disks. However, on the final setup it shows the welcome screen. Then u hear a beep and then the screen goes black with a message saying that windows could not install and to try installing it again. I have done this 3 times and its always the same thing. Is this a Hard drive issue or a software issue and how can i get this to work?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around.
Create a retail Windows 7 installation disc yourself using another PC - just download the correct Disc Image from the link below ( this must be the exact version your notebook came with ) and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Validations using OB28 is not working for GL posting using FB01

Hi Experts,
Validations using OB28 for posting using FB01 is not working.
My requirement is after entering a line items and click post validations should be triggerd.
i want to block a posting based on document type.
i have maintained as below..
Prerequisite.
( BKPF-TCODE = 'FB50' OR BKPF-TCODE = 'FB01' ) AND (
BKPF-BUKRS = '1000' OR BKPF-BUKRS = '0001' OR
BKPF-BUKRS = '0002' ) AND BKPF-BLART = 'XX'.
check.
Used userexit to check sy-ucomm = 'BU' (for posting).
entries are maintained in OB28 for relevant company codes.
it is working for FB50 but not FB01.
same thing i tried to maintain at header level as well as item level. but it is working only for FB50 but for FB01.
Please help me.
Regards.
Venu.

Hi Venu,
Go to GGB0 and expand the navigation till you reach the validation name of line item level and choose menu item *Validation -> Simulate.
Here you can enter the inputs, those you are entering while doing FB01 and execute it.
Then in the results, you will have the log for each step of your total validation of line item level.
Check , whether your questioned STEP's pre requisite is met and check is not fullfilled.
Accordingly you can make the changes to the STEP.
This info may help you.
Regards,
Srinivas

Serial number from cs5 wont work for cs5.5

i have cs5 creative design premuim on my old laptop but it struggled to run it. i recently got a new laptop and want to put it on there only to find i have misplaced the disk and tryed downlaoding it but i cant dowload cs5 any more. i dowlaoded cs5.5 but the serial number from my cs5 wont work help i need to use it asap and the trial has run out

Serial number of cs5 will not work in cs5.5 , they are version dependent.
YOu can download the cs5 from "prodesigntools.com" and then install the software.
Write a DVD or take a backup of the files downloaded for the later use.

Ive had my iphone 4s since 10th april and on three seperate occassions its switched itself off completely (whilst having battery) it then wont work for around 2 days, this is very annoying and I dont know what to do as its been out for around 12hours now

I don't know why my phone keeps switching itself off, I've never dropped it, had water damage nor any other damage to it. Ive had it for around 5 months or so now and it just likes to switch itself off for around 30-40 hours then work again as though nothing happened. Although this is great as it will eventually work its very frustrating not knowing if it will switch on again.. at the minute my phone hasnt worked for about 10-12 hours. I went in to the apple shop and they said they couldnt see me for over a week as they were fully booked, I understand that theyre busy but surely they can't expect me to go without a phone/alarm/email for that time when I am paying for it. Does anyone have any help/advice they can offer? Thanks

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Help... Itunes wont work for 2nd time now, and very important....

This is the 2nd time, itunes just totally stopped working for me ( Like wont open, no matter if I click on it in the quick launch, The shortcut, or the actual program...
This time is not like the last time however...
Song's that I have recorded here at my home studio that I have yet to burn are on there... And Beat's that I have made, that are not backed up in FL Studio are in there, and so are numerous Mixtapes I have made, but yet to burn on to disc's.
I don't want to lose all those song's!!!
As a matter of fact I have 800+ Song's on my itunes, and I don't want to lose them!
Please help me out, I was just gonna burn all my stuff just today.

Try this :
http://discussions.apple.com/thread.jspa?threadID=315147&tstart=30

Sql_trace does not work for Java app using Oracle JDBC thin driver

Hi,
I'm using Oracle 8.1.7. I enabled sql trace at instance level by setting sql_trace and timed_statistics to true in init.ora. I restarted the db instance. I wrote a stand-alone java application which used Oracle JDBC thin driver(classes12.zip) to make a connection to my db instance, do some select statements, and close the connection. There were no trace files generated in the folder specified by udump_dest variable. However, if I used sqlplus or dba studio, I saw trace files generated. Has anyone got Oracle sql trace work for JDBC calls from java apps.
Thanks in advance!

Hi,
I'm using Oracle 8.1.7. I enabled sql trace at instance level by setting sql_trace and timed_statistics to true in init.ora. I restarted the db instance. I wrote a stand-alone java application which used Oracle JDBC thin driver(classes12.zip) to make a connection to my db instance, do some select statements, and close the connection. There were no trace files generated in the folder specified by udump_dest variable. However, if I used sqlplus or dba studio, I saw trace files generated. Has anyone got Oracle sql trace work for JDBC calls from java apps.
Thanks in advance!

Iphone/ipad/ipod charger wire wont work for iphone or ipod but does work for ipad very strange

guys this is so odd and pointless but for some reason my charger wont let my iphone charge or ipod but it works for iphone. iphone running ios 7 same with ipad. any solutions?

Hello there, Kareem77.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
If the issue persists, the first article also refers to this:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Shockwave wont work for a thing using Shockwave.

Similar Messages

Maybe you are looking for