Shooping Cart status update after PO Release
Hello All,
We are using SAP SRM 4.0 classi scenario.
In shopping cart status the follow on document PR and PO are showing once created.
But our requirement is the shopping cart status shold show the follow on document PO once the Final release is approved.
Request your help to meet the above requirement.
Thanks & Regards,
Madhan.
Hi,
You mean to say..Final release of PR or PO in the backend then only it hsould update in SRM.
I think it is not poosible. As BBP_GET_STATUS job will take all the SC which are in peding.
Thanks
Venkatesh P
Similar Messages
-
I'me fairly new to Snow Leopard but have decided against upgrading to Lion for the near future (I'm running 10.6.8.) After Lion is released this month, do I in that case continue to accept software updates when I'm prompted to? I understand some updates affect my printer, Microsoft office and stuff so I want those, but is there a chance that an update to Lion might slip through next October or December and cause problems with my Snow Leopard software? Or, should I decline certain updates and in that case, how would I know what to decline? I'm thinking Apple can read my configuration from wherever they are located and automatically decide what updates to send me but I don't know that for a fact.
Software update will only offer you updates that apply to your system.
Regards,
Captfred -
Contract getting into HELD status even after clicking Release button.
Hi Experts,
I have a query regarding Contracts. We have a contract and trying to extend the validity date. Once "Release" button is clicked the Contract is getting into "HELD" status which is incorrect. Correct status should be "Released" status.
We have not implemented any approval workflow for contracts. Please can anyone provide any solution or pointers to resolve this issue.
We are on SRM 5.0, ECS.
Thanks
RB
Edited by: Rajeshree Bhatiya on Jan 24, 2012 4:03 PMHi,
Go to the held contract ,click on change button and then click the check button to see any errors are there.
if there are any errors it will be held position
just check this
G.Ganesh Kumar -
More specifically even when I click Tools->Sync Now nothing happens. Also when I do a "Reset Sync" via Tools->Options->Firefox Sync, nothing happens. Meaning no progress bar appears indicating that data is being synced or has been synced, as it used to happen in earlier versions of Firefox. Is there a way to know after pressing Sync Now that my data has been synced?
There is no visual representation to show that it has worked or is in progress, but if it fails you get a bar appearing at the bottom of the screen telling you that the sync failed.
If you add the Firefox Sync toolbar button to the toolbar, hovering the mouse over the button will give a tooltip showing the last date/time of the last successful sync. For details of how to add the button see https://support.mozilla.com/kb/how-do-i-customize-toolbars -
Problem in PR update after final release
Dear Expert,
I have problem in release PR, when PR already release (indicator release '1' -> cannot be changed), it can't be changed from ME52N. But for PR that generated from maintenance order, user still can add new item in maintenance order and PR will automatically have new item without asking new release.
Does anyone have solution for this??Thank you.
Rgds,
Desty.Hi Desty,
This is not considered an error, please refer the question 1 of the note 493900 FAQ: Release Strategy :
1. Why can I modify a purchase requisition although I set the
changeability of the release indicator to '1' ('Cannot be changed')
Answer.
The purchase requisition is not modifiable via a purchasing transaction
like ME52 or ME52N. But it is possible to change the purchase
requisition from any other external application like sales order,
planned order, maintenance order or network.
The Changeability functionality only concerns the purchasing
transactions. This is intended and a new release strategy determination
takes place if there is a modification of the data in the external
application.
Regards,
Mauro -
Accounts updated after PGI and release to accounting
Hi All,
Could you pls tell me,
1.Which documents documents are updated after billing(release to accounting?
2.After PGI what documents will be updated and which accounts?
Hope this is clear
regards,
JamesHi,
The following updations take place on PGI:
1. Warehouse stock of the material is reduced by the delivery quantity
2. Value changes are posted to the balance sheet account in inventory accounting
3. Requirements are reduced by the delivery quantity
4. The serial number status is updated
5. Goods issue posting is automatically recorded in the document flow
6. Stock determination is executed for the vendor's consignment stock
7. A worklist for the proof of delivery is generated
8. A worklist for the proof of delivery is generated
After goods issue is posted for an outbound delivery, the scope for changing the delivery document becomes very limited. This prevents there being any discrepancies between the goods issue document and the outbound delivery.
Cheerzz..
Subbz.. -
Hi Guru's
I have a issue with shoping cart status update.I am in classic scenario,created shopping cart a Purchase req generated in the backend system.The status of the shopping cart also updated as Purchase req created.When i convert the PR to PO in the backend,this status is not getting updated in the shopping cart still showing as purchase req created.
How to update the PO created status.
Wih Regards
Sri Ram.Muthu,Thanks for your reply,
Both the jobs are running fine.
I have tried running the jobs for the particular shopping cart, but no use.
With Regards
Sri Ram. -
Removed all changes in Java source after installing Release 2 Update 1 Hot
I happened the same problem twice after installing Release 2 Update 1 Hot Fixes:
Operations as followed:
1. Open the project
2. Modify some source code of the backing bean and then save the modifications.
3. Click the design tab to display the UI of this page and click on a button.
4. Click the property 'action' of this button in the property tab.
5. The dialog shows and I choose 'Unset property'.
6. Go back to its backing bean and guess what...
7. All the changes I made in step 1 are all gone. The source code of the backing bean goes back to the status right after I opened Creator2.
I discussed the problem with my colleagues and they have similar situations after installing Release 2 Update 1 Hot Fixes. They may do some other things in the UI Design page and when back to the backing bean, the changes to the backing bean since Creator 2 is opened are all gone and the source code of the backing bean goes back to the status right after Creator2 is opened.This has been covered....
http://swforum.sun.com/jive/thread.jspa?threadID=105962&tstart=60
:-) -
After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem. -
I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.
Have you restarted your phone?
If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
Check for the app again after the phone starts back up.
~Lyssa -
I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.
If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD -
Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?
I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps... -
Transfer requirement status not updated after TO confirmation
Hi Experts,
I have an issue with transfer requirement which is not updated with completed status even after Transfer Order completed.
Once TO is completed, relevant TR should be updated with completed status. We have many TR in open status even they are completed.
Could you please help me out how to resolve the issue.
Regards
Gowri SankarHi
You can use the Warehouse activity monitor (LL01) to select the completed TR's and select the d''delivery completed' button and this will get rid of them
I hope that this helps
Frenchy -
Why is EE showing in the status bar after update
why is EE showing in the status bar after update and is it costing anything to have this on, can i remove it?
Start with this article: iOS: Wi-Fi settings grayed out or dim - Apple Support
If the steps here do not work, you probably have a hardware issue and will need to replace the device. -
Last Status Update in Distribution Point Configuration Status after 2012 R2 Upgrade not updating
I am having the oddest problem, and I was wondering if anyone had some pointers or knows how I can get this working. After I upgraded from
2012 SP1 CU3 to 2012 R2, the status update date on the DP config status will not update at all, even though under each DP it is updating? I can still push content to them, but instead of getting a % of transfer that is complete I get the generic 'Detail will
be available after the server finishes processing the messages'. I have tried to remove and re add the DP role to the DP's and am met with the same problem. I am assuming it's something is SQL but where to begin to look I have no idea.Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
BTW I find that most of these type of things take ~ 24 hours to update.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
Maybe you are looking for
-
When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong? I used the iframe code from Facebook's "Like Button" site; and inserted the code in the html widg
-
hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas p
-
Approve guest account in Cisco ISE 1.3
Hello everybody, I can't approve guest account in the cisco ISE after I create them. when I want to approve an account I should write a sponsor email, but always I had the same problem: the values entered are incorrect. (Les valeurs saisies son
-
I want to insert image/bFile into blob data. I need the insert statement on that data. Thanx.. Ratan
-
? Export and burn project in .avi format
How do you export a FCP project to disc so that it is just an .avi file. My video clip needs to be uploaded to a website and the site requires an .avi file. I tried emporting it as an .avi file from FCP but after I burned it in DVDSP it comes up as a