Shoot in high speed and slow down in FCP

Hi All
I’m planning to shoot footage HD that I would like to slow down almost 20% but I’ll rather avoid the jitter that usually shows on the video. I understood that I have to shoot in high speed. Do you have any suggestion of how to do this…
I was thinking to change the shutter speed of my camera but I’m not sure how much I have to change it.
I’m shooting with a Sony FX1
Best and thank you for the help
Lina

To shoot at a 'high speed', you need a camera such as the Varicam that will record at higher frame rate than 30fps. I believe the HVX-200 will allow you to overcrank things a bit (60p).
Otherwise, something like Shake will do a much better job slowing footage than FCP.
Good luck.

Similar Messages

Making video start fast and slow down?

I am trying to avoid doing this in FCP because I know speed changed video can be jumpy...
Basically I have video that pans and I want to start fast, lets say 600% speed and slow down just at the end to 100%.
I know that in motion it doesn't work with percentages, so how's the best way to go about this. I tried variable speed, but It starts slow then speeds up...
Also, I would like to add a motion blur, is this achieved with activating motion blur in the render tab?
Thanks

Well, I had a bunch of videos that I overlaid with mattes to make it look like one continuous video... But the resulting video was 30 seconds and I needed it to be 5 seconds..
So I exported a QT movie and re-imported it into Motion. Then I just went to the Timing property and changed the speed to variable. This gave me a key frame at the beginning and end of the clip. So I just dragged the keyframe at the end to 150th frame (for 5 seconds).
But since I wanted to slow down the video just a tad at various points, I added a key frame to each area I wanted to slow. I then went into the Keyframe editor and made the interpolation to bezier, then just rotated the bezier to be horizontal. This slowed the video just a tad in each part.
I also changed the frame blending to motion blur blending.
Pretty straight forward once I got the hang of it.

G5 Power Supply Popped - Still works but fan speeds up/slows down nonstop!

Hi,
After applying a security update for Tiger 4.11 on my G5 1.6 a few hours later my machine made a bang/pop sound. It still powers up but once running it sounds like the machine is ramping up to speed and slowing down again. It does this continuously even when machine is running. Apple hardware test reports no problems but i'm concerned. Any ideas?
Thanks.
Dan

I had a similar problem (fans speeding up then slowing down). I have iStat installed so I was able to look at the rpm's of the fan (free widget btw). My CPU fans ranged from 2500 to 3200, oscilated all day long....up, down, up, down ...every few seconds. I noticed my CPU utilization was up, which was odd since my machine was somewhat idel. Looked at Activity monitor and saw my CPU's sometimes reached 90%. The application that was using the CPU's was the printmgr. Stopped the process and everything is ok. I know it is unrelated to the popping sound but you might ck the activity monitor to see what is going on.

On iMovie for iPad2, is it possible to speed up and slow down voices?

On iMovie for iPad2, is it possible to speed up and slow down voices? (in order to sound like a chipmunk for example) I know that it can be done on a Mac, but what about iPad?

It it possible to speed up or slow down music from my iTunes file?
http://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
(Let the page FULLY load. The link to your answer is at the top of your screen)
cut
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
blend
open GB's help and search for "curve"
I am using music from my iTunes.
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)

MacBook Pro can't recognize battery, fan is at high speed and computer functions really slow

My MacBook Pro suddenly won't recognize it's battery so I tried rmoving it's battery and put it back again. I can use it but there is still an (X) sign instead of the battery percentage on the upper right corner of my desktop. After this I turned on my laptop and all of a sudden the fan turned on on high speed and it became slow (by slow I mean really slow) even if I don't open/use anything on my computer because of this I went to an Apple Service Center and they tried to check if its because of the hard drive, RAM and all that stuff. They told me it's not because of those things but they also told me that maybe the wiring or the cable of the battery that connects to the computer is not working so I have to replace it. But for the fan and the slowing of my computer they don't know what's happening.
I really need help. Pleaseeeeeee. Thanks in advance.
MacBook Pro 13"
OS X - 10.9.5
Processor 2.4 GHz Intel Corr 2 Duo
Memory 4 GB 1067 MHz DDR3

Perform a SMC reset:
http://support.apple.com/en-us/HT201295
If no change, run an Apple hardware Test:
http://support.apple.com/en-us/HT201257
Ciao.

Speed up and slow down tracks

I need a program that I can speed up and slow down tracks with. Is that possible in Logic Express? I know that it can be done in Logic Pro, however I don't need quite that much program.

xcuse me if i jump in here without answering the original question, but that brings up something similar to me:
if i have a setup in the arrange with a combination of various audio-files, apple loops and midi-tracks, and i want to record something additional into that (midi over connected edirol midi-keyboard): can i slow down the whole song, just to make it easier to record the new part without destructively destroying anything?
and after that just go back to the original song-tempo?
thanx a bunch for any thoughts!
again, sorry balletboy for jumpin in here, hope that is ok for you :o)

GE60 fan problem. speeds up and slows down constantly [EC reset done]

My model is GE60 OCN and bios and EC is the newest ones for win7 embeded on msi website.
I have the same problem with others if you search here 'ge60 fan'.
The temperature between 50~60℃ the fans runs slow and really quite.
But if the temperature goes down under about 46℃, it speed up and slows down constantly and it is annoying and much noiser.
I think msi should provide new EC firmware for this. Even the temperature is low, it annoys and nosier than when the temperature is between 50~60℃.
Please check this problem and provide new EC firmware for fan policy.
Someone has uploaded video link: youtube.com/watch?v=OQjjjVOpsEQ
this is exact problem with me as well.

I have exactly the same problem. Let's continue in the other thread (https://forum-en.msi.com/index.php?topic=165613.0)

Messages are in to be delivered state and slows down the message processing

Hello,
Messages are in to be delivered state and slows down the message processing.
this happenens in case of DB2 on some machine where the issue about high load on DB2 is caused by standard programming in SAP XI that executes a statement, where it uses the condition 'where 1<0' prio to the original SQL statement configured in the channel configuration,
Can you please help me out in solving this issue?
Thanks,
Soorya

Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords

Web page browsing speed drastically slowing down

I purchased a 13 inch mac book pro in December. Since day one, I have had a problem with my web page browsing speed drastically slowing down. These crippling slow down periods are completely random. They can start any time, and last from any amount of time. from minutes to hours.
95% of the time any attempt to load a page end in a time out. The other 5% takes no less then 90 seconds to load the simplest of pages. I have this problem no matter what browser I use (Firefox, Chrome, Safari, Opera). What is driving me nuts is other applications work fine when browsing slows down. Skype, IM clients, multi-player games all work great, but web pages will not load. When I ping a website, my latency returns are perfectly normal. I can use Telnet and SSH with no problem.
This has become such a problem that I can not depend on using OS X day to day. I used boot camp to setup a windows partition and installed win 7. Using my win 7 install everything runs perfectly, I have had zero slow down!
I've done some searching and found numerous posts with similar problems. Ive read and followed the advice that I found, but I've had no success is fixing this.
I have had this problem on 6 different wireless networks. Each time this problem has come into play, my windows install performs flawlessly. This really makes me belive this is a software problem. Not hardware / ISP.
I see alot of post blaming default ISP DNS servers, just to let everyone know I use google's open DNS on my home network.
I also have changed the DNS settings in OS X
All other machines on my home network have zero problems!
Sending files between my laptop and other machines on my network works perfectly.
I have found a few posts / guides for using OnyX, none of them have worked for me
I have to be missing some simple thing here, any help would be greatly appreciated.
Message was edited by: BinomialHeap

Thank you for the welcome and the quick response Glynn
I rebooted into OS X as soon as I read your response. Web pages would not load.
I followed your instructions.
The Airport Light was green.
I went ahead and hit assist me and ran the diag tool. According to the tool my internet connection is working correctly.
Sadly the problem persists and web pages still will not load in all four browsers.
I ran a ping to google.com and responses were well under 45 ms.
Message was edited by: BinomialHeap

Speeding up / Slowing down beginning movements of still images

I want to "exponentialize" moves when I use still images. I want to create non-linear speed up and slow downs at the beginning or end of my movement. Does FCE do this? Where? I know Adobe Premiere used to do it?
Any Suggestions?
~Mark

In FCP you can ease scale, rotation and most other keyframable values.
You used the term expontential in your first question. This specifically refers to scaling animation that makes the speed of the motion appear to be continuous. This is a feature in After Effects, but is not available in any Final Cut Studio product.
All the best,
Tom

Lion stalling and slowing down

Dead LION
Two-three months ago I upgraded to Lion (10.7.4)
The Lion discriminates a lot of applications
I should never have done that. Waste of money and especially a waste of my time.
There are NO essential news in Lion. It's just a monymaker for Apple
A bunch of applications does not work in Lion, while they been working fine in Snowleopard.
I could not delete the Lion and re-install SnowLeopard. (With out deleting all my datas).
I had to install SnowLeopard on a seperate external harddrive and now have to organize and disintegrate my else integrated work on two harddrives.
What a f'''''' bore. And absolute no thanks to Apple.
The Lion is stalling and slowing down, quits applications etc.
Since I installed the Lion on my computer (MacBook Pro 2 Ghz Intel core i7. 4 GB 1333 Hz DDR3)
is has been slowing down, in general and especially my browsers (Safari 5.1.7) (Google Chrome 13.0782.215) (Firefox 13.0.1). And Mail (5.2).
The OS quits applications, especially Mail and Safari.
The OS makes applications ever so often go in no-answer mode . Then I have to forcefully end them and start all over.
For speed and comfort I am back to 1991 Apple LC with 2 MB RAM. And no, the comfort was better then.
I have repaired disk with the OS own disktool.
I have reparied permissions again and again.
I have scanned for all problems and virus (MacKeeper).
I have rebooted and set the parametres to zero.
All applications are updated
Nothing helps.
I hope some of you friendly users or nerds can help. Thank you.
Best wisges Jan Knus

Sounds like a failed HD. Get another HD, install it, reinstall the OS, upgrade to Lion, and then restore the TM backup.

Can the wireless card in my mac wear out and slow down internet connection??

can the wireless card in my mac wear out and slow down internet connection??

Yes the WiFi card can wear out but not what you would really call wearing out like a pair of pants do. It can start to fail causing the connection between your computer and your Wifi router to slow down, IE transmit and receive less data in a given time period. And then it will fail completely.
But as to your internet connection being affected by a failing WiFi card no that can't happen.
If you turn the WiFi off and connect the computer to your router with an Ethernet cable does your internet browsing and downloading speed increase? If it does then there may be something wrong with the WiFi card in your computer or the WiFi section of your router. Hard to say which.
If after connecting the computer to your router with an Ethernet cable and your speeds do not increase then it is a problem with the router or on your ISPs end.

Speed up/slow down clips

Hi
I must be missing a trick here. Does anyone know how to speed up/slow down clips in i-movie?
Any help appreciated,
thanks
ospr1

Did apple actually decide not to add these feature on IM08. If so why?
I doubt the Apple made a conscious decision to remove any features. It is more likely the current inability to "thread" the command structure that is causing all of the problems. Basically, the old application allowed third-parties to create code routines that could be selected and called directly/immediately by the user when he or she wished to create a special effect. In essence, the source data is passed to the called routine, modified on the spot, and then inserted into the "timeline" replacing the source content. However, iMovie '08 does not perform any immediate/direct processing. Instead, it lists the source segments to be modified and states what "effect" is to be applied. No real action is taken until the file is actually to be shared or exported. Then, and only then, is a physical movie created. Therefore, the problem is to create an application (iMovie '08) with the capability of extending its own command list, as well as, define these new commands as a process or series of processes which can be called independently at a later time. If your are familiar with FORTH or a similar programming language which has a threaded command structure (i.e., one in which you can define new commands in terms of previously defined commands and formally add them to the command list/structure) then you will likely understand the problems that need to be overcome here by Apple and all third-party companies likely to be involved in creating/re-creating "plug-ins" for iMovie '08.

IMovie 08 - Speed up/ slow down clips

anybody know how to speed up / slow down clips in iMovie 08?
thanks

You can do slow motion with iMovie 08, but it requires the assistance of other programs.
Give the more powerful iMovie 06 a try, you'll find these features and others built in.
Below is a short video showing how slow motion works.
http://www.youtube.com/watch?v=ekemnSluEgs
iMovie 06 is a free download to iLife 08 owners. (THEY WANT YOU TO HAVE IT!)
http://www.apple.com/support/downloads/imovieHD6.html
Much has been written about the differences between iMovie 06 and iMovie 08. I have found the below link to be helpful.
http://www.geethree.com/slick/imovie8.html

Time mapping in Logic? Want to speed up\slow down track.

I've used time-mapping in Final Cut. But never in Logic. I've got a LOT of slowing-down \ speeding-up to do on a score that will be mostly midi \ sample instrument based.
Could someone point me to whatever it is called in Logic?, and are there choices of how to do it? Complex vs. easy? I vaguely remember finding it tricky in Logic to create a click-track 'after-the-fact' to match a piece of audio.
All ears,
Ben

Hi Erik,
I've got a Bach piece I've midi'd, written in rather than played (it would take me days to learn to perform it decently). There are no dynamics in the piece.
I want to add the dynamics. Volume\velocity is easy. But I also want to start the performance slow, speed up, then slow down.
If there is any 'real' audio I will add it after, so that's not an issue, I'll just follow the scored track.
What I need is the easiest way to control the speed of the performance ... speeding up, slowing down incrementally (rather than just abruptly changing the tempo). I remember the 'beat-mapping' now, as something you do after you've recorded a live-audio piece. I also remember it being really tricky to work with.
B

Shoot in high speed and slow down in FCP

Similar Messages

Maybe you are looking for