Shooting into Aperture

Is there any way to shoot with you camera connected to you computer and your picture sow up directly in aperture?

Aperture doesn't have any tethered abilities, but if you use another program capable of tethered shooting such as Nikon Capture or Canon's RemoteCapture you can set up a hot folder that will automatically import images into Aperture, and point the tethered software to save into that folder.
http://discussions.apple.com/thread.jspa?messageID=1288674&#1288674
Ian

Similar Messages

Importing video clips in AVCHD (Lite) into Aperture vs iMovie

I'm trying to figure out which application I should use for importing and storing video clips shot on my Panasonic DMC-ZS7 camera. This camera can shoot in AVCHD (Lite) or in Motion JPEG. I use the AVCHD (Lite) format to shoot the videos with this camera.
The two application options I currently have for importing video clips from this camera are:
a. Aperture 3.5.1 (I'm not using iPhoto since I have Aperture).
b. iMovie 10.0.1 (I'm not using Final Cut Pro)
When I first got this camera, Aperture 3 did not support the AVCHD Lite codec. Back then, iMovie could import video clips shot in AVCHD Lite, but it had to transcode the AVCHD video clips into AIC (Apple Intermediate Codec). Some time later, one of the Aperture 3 updates made it possible to import AVCHD Lite into Aperture (without having to transode into an intermediate codec), so we started importing our video clips shot in AVCHD Lite (together with our photos shot by the same camera) directly into Aperture.
iMovie 10 released in 2013 supports importing video clips shot in AVCHD Lite without having to transode them to AIC for storing these video clips in iMovie. So, now we have a dilemma that we need help with. Which application should we use going forward for importing video clips from this camera?
When I look at the metadata for the imported videos in Aperture, I see that the format of the imported video clips is listed as H.264. However, I can't seem to be able to find any information about the format in which iMovie stores imported videos. I can "Reveal in Finder" a video that I import into iMovie, and I see the size of the file and the .mov extension assigned to the file. With video files, the extension does not always determine the codec of the file, but in my non-expert opinion, the .mov extension is not H.264; I may be totally wrong here, though. What I have noticed, though, is that a video clip imported into iMovie has the file size that is about 10% larger than the same video clip imported into Aperture.
Therefore, I have three questions:
1. What format is a video clip (shot in AVCHD Lite) stored in Aperture 3.5.1 and in iMovie 10.0.1
2. Which format (the one used by Aperture or the one used in iMovie) is better suited for transoding AVCHD videos into? The balance of the quality and file size is the main consideration for us.
3. Which applications would you personally prefer using for importing video clips to and why?
I do want to use some of these video clips to make home videos in the future, utillizing iMovie. However, it seems I can still store the raw footage in Aperture and access this raw footage from iMovie to be able to create an iMovie project and a final home video. One of the concerns is that if we keep importing our video clips into Aperture, the Aperture library could grow beyond the size that Aperture can support and we may end up losing our photos due to the database corruption. Is this a real risk?
Thank you!

I had the same question recently. Go to the right of this box and a little above, into the Search Discussions window. Type in this: Is MPEG2 the answer
You will find my question, and the great answers I got. Follow those directions and you will be all set!

How do I import into Aperture in the yyyy/mm/dd format?

For years I have been importing photos from my Canon with EOS Utility in the yyyy/mm/dd format. I have successlully imported this whole file structure into Aperture....using Import<files as folders.
But I cannot get Aperture to import into this file structure from my camera automatically. How do I set this up? It seems ridiculously complicated to me.
Surely I am not the first person in the world to want to organize photos by date shot?????

Thankyou Leonie,
Sorry, I did mean 'folders as projects'. Here is my file structure.....very basic....folder<year>....folder<month>....project<day>
This is not allowing me to insert a sheenshot for some reason, but the project name for each day is simply '13' for example instaed of 2012-04-13 as in Frank's example. But other than that, our file structures are the same.
If I shoot for a couple of weeks that bridges 2 months for example, does this script download last months photos into last months (already existing) folder, creating and naming new projects for each day........then create and name this month's folder and create and name the days as projects?
I have to say that I find it fairly curious that Aperture needs a kind contributor like Frank to write this whole Apple script thing to do what the download utilities from Canon, Nikon and most other manufacturers do automatically.
I feel like I must be missing something incridably obvious or is it really very unusual to want your photos in chronological order??

Raw into Aperture, Jpeg into iPhoto

If i shoot a combo of RAW and jpeg is it possible to divide the export, WAW going into aperture and Jpeg into iPhoto. I know i could pull them of the card manually, but i was wondering if i could make the programs do this when i put my card into the reader
thanks

Like Beverly,I don't own Aperture,but have looked at it.
Apparently the jpegs are hidden when grouped with RAW.Please see this link in the Aperture forum to get you started:
http://discussions.apple.com/message.jspa?messageID=1637709#1637709
There are several more threads in the Aperture forum which may answer more questions as well.
Good luck,
Scott

Auto import images into aperture...and continue importing...

i know that there is a script to import images into aperture, but i need to use this with a tethered camera....so i use a canon app to shoot files to a folder and as the files come in, i need them to get imported as they keep coming in....i am only referencing them, so they are actually staying within the folder....i can import the files but i don't know how to/which command "keeps checking the folder for new files that came in" hope this makes sense....
i know that there is a "hot folder" app available which seems to be a automator app, but it is superslow and only brings in every 4th or 5th image (and sometimes just brings everything to a halt...)

i know that there is a script to import images into aperture, but i need to use this with a tethered camera....so i use a canon app to shoot files to a folder and as the files come in, i need them to get imported as they keep coming in....i am only referencing them, so they are actually staying within the folder....i can import the files but i don't know how to/which command "keeps checking the folder for new files that came in" hope this makes sense....
i know that there is a "hot folder" app available which seems to be a automator app, but it is superslow and only brings in every 4th or 5th image (and sometimes just brings everything to a halt...)

Externally edited Photoshop files are huge when saved back into Aperture 3

I start with an 8MB JPEG photo. I externally edit it in Photoshop Elements 6, and hit "Save". The edited image is saved back into Aperture, but it's now 34MB PSD. Ouch! My hard disk is big but this is over the top. The intent of me moving to Aperture from iPhoto had been to reduce file sizes (masters and versions), not to hugely increase them.
If I use "Save As" and convert it to a JPEG, the saved edited photo vanishes--it isn't in Aperture. I can't find it. If it is saved in some unknown location it is taking up hard disk space uselessly.
Can you help me do this better? I would be most grateful.
Message was edited by: shep222

shep222 wrote:>...even if I do zero Photoshop editing I still get this >3 times increase in file size.
Yup. That is how big such files are when not compressed and image data has not been discarded.
It's an Aperture vs. iPhoto thing: When I did Photoshop External Editing in iPhoto (before I switched to Aperture) the original JPEG stays a JPEG when exported to Photoshop. The file size problem does not occur in iPhoto.
That is correct, and is why few if any pros use iPhoto. iPhoto is by definition +low end,+ dumping image files into lossy JPEG by default. A RAW file imported into iPhoto is saved in JPEG unless the user takes special action to export it as TIFF or PSD.
Aperture won't allow it--it seems to insist on converting to PSD for external editing.
Also correct. Aperture is a professional app, and intentionally and repeatedly discarding image data would not be professional workflow.
My JPEG's are top-notch low-compression ones, using the least compression settings in my Olympus micro-4/3 camera (super fine, large image, with 1/2.7 compression). JPEG artefacts have not been an issue even after extensive Photoshop editing.
Agreed, top quality JPEGs can be very useful even though image information has been discarded. Back when RAW DSLR capture was unusably slow I shot many full-page magazine ads using JPEG Fine. But once the (fast) Nikon D2x came out I have always captured RAW and would no way ever again consider far inferior JPEG-only capture.
Perhaps Aperture is not for me, if we can't overcome this issue.
Perhaps. However IMO a far better approach is to shoot RAW and embrace a professional lossless workflow using Aperture. Mass storage is cheap and the benefits of RAW capture are very significant.
Already my Aperture Library is 70GB and I have barely started with it.
The issue of huge Library is due to using a Managed-Masters Library. Switch to RAW capture and a Referenced-Masters Library with the Library on an internal drive and the Masters referenced on external drives and the Library will no longer grow ridiculously large. IMO discarding image data via JPEG compression just to save hard drive space is inappropriate in 2011.
HTH
-Allen Wicks

Duplicates when Importing into Aperture

When I import photos into aperture from either my camera or computer, it imports 2 copies of each photo. How can I get it only import 1 copy?

That is definitely not normal behavior unless you are shooting both RAW+JPG and importing them both asseparate masters.
What are your settings in the Aperture import window, especially the setting for RAW + JPEG Pairs?

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels. Any easy solution?
Steps:
1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
3. Downloaded and installed the current operating system (about a 3-hours process for me). OSX 10.9.2, here we are!
4. Then I returned to the Apple Store, found, and purchased Aperture 3. [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away. I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves. All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed. Screen-capture of just one example (at 100% viewer setting):
I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption. Lather, rinse, repeat - ~300 times! An estimated 2-3 hours of additional work.
Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list. I am running OSX 10.9.2
<Re-Titled By Host>

Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix?

Can't import an iPhoto library into Aperture

I'm using Aperture 1.5.2 and iPhoto 6.0.6 and cannot get Aperture to import my iPhoto library. I am following the procedure in the Aperture User Manual (p. 112) but it doesn't work. I don't get a beach-ball cursor or anything... no images, no disk activity, etc. This is regardless of the “Store Files:” or “Version Names:” or other settings in the dialog box.
I saw the Apple Support doc entitled “Aperture can't import iPhoto Library from iPhoto 6.0.1 or 6.0.2” which promises a fix in Aperture 1.1. Is this still the same problem? Or is it a different problem?
I know I can drag the photos from iPhoto into Aperture, but keywords are not preserved. Any suggestions?
PowerBook Al 15 Mac OS X (10.4.9)

I recently started using Aperture 1.5.2 and imported my iPhoto Library from iPhoto 6.0.6, so it's not an impossible task. I also had a lot of trouble with it. I can say it was a pain and there were several false starts and once it froze half-way through importing them. I did File -> Import... -> iPhoto Library and I left the files in their current location... but you said this was regardless of settings. I swear the thing just sat their for a good 20 minutes after I told it to import, although I can't recall if there was a spinning cursor or not. I'd get occasional errors about being unable to connect to server at the beginning (after it sat there for 20 minutes) and middle of the process. I just kept hitting Okay and if I had all other applications closed, Aperature finally did it. So... I guess that all amounts to: "I had problems, too, but after several tries it worked so maybe just keep trying and let it sit for awhile if no one else has a more helpful suggestion." Good luck!

How do I import an Iphoto Project (book) directly into Aperture 2?

I have a book that I did as a project in iPhoto '08 that I would like to import directly into Aperture 2 and "redo" the book using Aperture's new features.
Although I imported my iPhoto library I don't seem to have this project in Aperture and when I look to export the project from iPhoto it wants to export it as a movie.
Since the photos from iPhoto are in Aperture I figured that importing the iPhoto project would be easy. I don't want to recreate the book again if I can help it - I just want to import and modify it in Aperture.
Is it possible to do and can anyone tell me how to do this?
Thanks,

You CAN completely customize the text in iPhoto books, including left/center/right justifications, and it is fairly easy. Here's the workaround:
1) In your iPhoto book (or calendar or whatever) layout, highlight the text you want to modify or change its alignment.
2) Launch TextEdit and open a blank document. Paste the text from iPhoto into the document.
3) Still in TextEdit, highlight your text. Using ordinary word processing methods, modify or realign your text as desired. When satisfied, highlight the customized text and copy it.
4) Back in iPhoto, paste the newly modified text you just copied from TextEdit into the desired text box, overwriting (or deleting first) the original text. All the modifications you made in TextEdit should apply.
This trick can work wonders for helping make an iPhoto book completely your design.
--bosskev

How to upgrade a Library on an external drive created in a previous version of aperture so I can re-import it from the external drive into Aperture 3.5.1 on my MBP ?

I have exported earlier Projects [which were created in Aperture 3.4.5] to an external hard drive. Now I wish to reimport them into Aperture 3.5.1 - which I use after having upgraded to Mavericks - but am given an error message saying I can’t reimport because the external drive is storing a Library created by an earlier version of Aperture than I’m using now. It tells me to upgrade that externally stored Library.
The Question - one can only upgrade a Library on one’s computer, not on the external drive. How can I upgrade it if I can’t get it back into Aperture [3.5.1] on my MacBookPro in the first place ?
Thank you
Bob

The Question - one can only upgrade a Library on one’s computer, not on the external drive. How can I upgrade it if I can’t get it back into Aperture [3.5.1] on my MacBookPro in the first place ?
You can upgrade the library on the external drive. Connect your external drive to your computer.
Then select the library with the exported projects on the external drive and double-click it to open it in Aperture. This will upgrade the library to Aperture 3.5.1. Since upgrading can sometimes be problematic, I recommend to make a backup copy of the library before you try to upgrade the library.
After that you should be able to merge the library into your main library using File > Import.

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

I have imported my I photo library into Aperture. all the old i photo events are now in the aperture library showing number of photos but when clicked none display. I can see the photos if i run the cursor over the project. Help please.

I imported my i photo library into aperture.
I can see the i photo events in aperture library as events with the number of photos in each event.
When you click events in the aperture library no photos appear although if you roll the cursor over the event icon it show the photos. If you click on the event either on the event icon or in the library no photos appear.
Help

Check, if you have any filters set. The search fields in the Insector panel and the browser should be showing "All items" or "Showing All".
The Browser search field could be set for each project and album individually, so you have to check it for each project.
Regards
Léonie
For example: The projects count shows "20 items", but the browser is empty, because the project's filter is set to show only rejected items.

TS5192 After updating with 4.09 my photos which I store on an external hard drive will load into Aperture for 15 or so photos and then I just get the same photo repeating despite clicking on a different one in the group. I have to stop working and come b

After installing the 4.09 fix to process RAW from Sony RX100 (after updating to 3.5.1), photos do not continue to load into Aperture from the external hard drive where they are referenced. The same photo is stuck in the adjustments frame to be worked on and the photos will not advance, no matter what I try, so i can work on the next one. I can only work on a few at a time and then i have to go away and come back another day. 4.09 does fix the barrel distortion but it has completely gummed up the uploading of the referenced photos. It's taking me days and weeks to process a couple of hundred photos.

The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
You should evaluate whether or not you have adequate RAM:
Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
HTH
-Allen

Error Message (Arrow and Exclaimation Mark in Yellow Triangle) Showing on Bottom Right of Some Photos after Merging iPhoto Library into Aperture

The strange thing is that some of these said photos with an error message have a normal thumbnail and can be opened fine, but the others (most of them) just have an empty space in the thumbnail as if the image can't be found.
I tried to Locate Referenced Files as Leonie suggested in https://discussions.apple.com/thread/3686982?tstart=0 but got this message 'The Selection Doesn't Have Any Referenced Files', so i presume that's not the issue.
In the thread mentioned above, Leonie mentioned something about not emptying trash. I did empty my trash recently, and started to think these images may have been poor quality ones i previously deleted in the iPhoto library … but that still doesn't explain why the error currently appears on some images which seem to work fine (these images are ok quality ones and there is no way i would have deleted them in the past).
Also - the 'Processing' message at the bottom of the browser seems to be spinning endlessly. I just left it for over 10 hours overnight and it's still going. Could this be linked to these error images which it's having a hard time finding/loading?
Quite baffled at the moment, and would really appreciate any feedback. TIA.
EDIT:
I just looked more closely. It appears that most of my folders have duplicates of the same image with exactly the same file name. And all the images with the error message have them on both duplicates (i.e. one on an image that has an empty thumbnail, and one on an image that's fine).
When i initially tried to import the library, it proceeded half way then failed. After opening the iPhoto library in Aperture first, and then doing the import again, everything worked fine. So, i'm wondering if the images with errors that are empty/blank may be the result of the failed 1st import.
What's puzzling is why they weren't overwritten (especially since all the file names are exactly the same). When importing the library, i chose 'merge' instead of 'add' when prompted, thinking that would solve it. Obviously not.
EDIT 2:
After reflecting on this, i thought one solution may be to:
a) Find all the error'd images that are empty/blank and delete them, and then
b) Find and remove all duplicates
So i followed Leonie's suggestion to create a Smart Album and use the 'File Status is Missing' rule.
But now, i see that there are images that i imported into Aperture months ago that have the same problem. And the new thing is that there are duplicates with errors where *both* images are visible (whereas for the iPhoto library i just imported, there were dupes where one version was blank and the other was visible and seemingly ok).
I'm really hoping there is a simple solution to this, and am awaiting some feedback before i try anything else.
NB. This is a super large (over 100GB) Aperture library that i am trying to consolidate everything into. It is Work In Progress and i was only going to back it up once the import of various iPhoto libraries was done. However, I'm wondering if it's better to just back up first - but if i do it now, the backup will include all these errors and duplicates. What would you guys do?

UPDATE 2:
The users in these 2 threads seem to have a similar File Status Not Found issue:
https://discussions.apple.com/thread/4086569?tstart=0
https://discussions.apple.com/message/17757686#17757686
Followed Leonie's advice to look for the (missing) masters inside the Masters folder, and indeed, they were missing. So, that confirms the reason for the error message.
If this does not work, because you have managed originals, inside the Aperture Library, look for your originals in the Aperture Library Package. Select the Library in the Finder and ctrl-click, then select "Show Package Contents" from the pop-up. In the Finder window that opens, navigate to the folder "Masters". Your missing images should be inside; the folder is structured by date of import.
Of course, the question is - why the masters for these few images are missing, when the other images in the same project that were imported/merged at the same time are fine.
Trying to do the library import/merge from iPhoto into Aperture again. Fingers crossed. Will report back on the result.

Shooting into Aperture

Similar Messages

Maybe you are looking for