Shop Floor Dispatching and Monitoring Tool for SAP ERP - License Requirement

Hi,
Does SFDM attract an additional license over and above the professional user license?
Thanks
Mark

Hi Mark,
SFDM is included in a Bisuness Suite license.
Regards,
Sergiy

Similar Messages

  • SFDM Tool (Shop Floor Dispatching and Monitoring), Technical questions

    Hi Everybody,
    i am very excited to change knowledge here on the SCN.
    Right now I am analyzing the SFDM Tool (Shop Floor Dispatching and Monitoring) and need some more Information, which cannot be found via Internet research. I hope someone, who is familiar with the technical details can support me with answers.
    1. Master Data:
    - How does the Interchange of master data (such as machine capacities in terms of time/quantities or number of available machines) work between the       SFDM and the ERP System?
    - Is there a permanent interface between the SFDM and the master data in the ERP System?
    - If so, which of the master data are communicated?
    - Are there any limitations?
    - Do BAPIs (Business Application Programming Interface) play a role?
    - Is any further master data maintenance necessary, if the customer wants to implement SFDM?
    2. There is a backend component situated in the ERP System called "SFDM on ABAP 1.0". What is the aim of this component?
    3. Does the SFDM work with algorithms? If so, why?
    4. Does the SFDM consider other machines in the same production plant?
    5. Does it work over HANA?
    6. Any further functionalities or restrictions?

    Hi
    i wouldn't recommend SFDM for performance problem solving, if this is the issue you are facing.
    If this is because planners are "lost" with CM25 because of problems for Production Orders selection and so-on, then try SFDM.
    There is no new functionality compared to CM2x transactions within ERP.
    The benefits are clearly focused on design and user-friendliness:
    interactive logs
    easy configuration of settings and strategy compared to CM2x TCodes
    accessible details
    Please keep also in mind the fact that this is working for individual capacities (cf. Rough Guide) and related constraints in terms of capacity category (only 0001 is supported).
    Best regards.
    Pierre-Edouard

  • New monitoring tool for SAP BusinessObjects Enterprise XI 3.1 SP2 & higher

    Did you know that there is a new monitoring tool available for SAP BusinessObjects Enterprise XI 3.1?
    It produces reports that summarise the SAP BusinessObjects Enterprise system landscape and its configuration, helps out with troubleshooting issues and points out areas of concern.
    It also delivers a lot of help with troubleshooting issues via Wily Introscope monitoring dashboards, an 'investigator' and transaction tracing.
    You can read more about it in this blog: /people/miles.escow/blog/2010/12/01/remote-support-component
    Edited by: Christian Luehe on Dec 2, 2010 5:07 PM

    Hi,
    we support official IBM Tivoli and Mircosoft SMS.
    Check google with "businessobjects enterprise monitoring" and you will find a lot of other vendors. maybe you find yours.
    Regards
    -Seb.

  • KPI Measuring and Monitoring Tool for Contact Centers

    Dear all,
    One of our customers using UCCE asked us for an  automatic tool that can monitor and measure the global contact center  KPI and availability including the following :
    - ICM/IPCC
    - CVP
    - CallManager
    Any suggestions?
    Thanks for all.

    I have an app that logs the execution time of all DataWindow retrieves in a table. I can then run a report that tells me which ones are slow. The base DataWindow object captures the start time in the retrievestart event and the retrieveend event inserts a row into a table with the DataWindow name datetime and elapsed time. I use the QueryPerformanceCounter Win API function to get sub-second timing.
    Something like this:
    External Functions:
    Function boolean QueryPerformanceFrequency(Ref Double lpFrequency) Library "kernel32.dll"
    Function boolean QueryPerformanceCounter(Ref Double lpPerformanceCount) Library "kernel32.dll"
    Instance variables:
    Double idbl_frequency
    Double idbl_start
    Constructor event:
    QueryPerformanceFrequency(idbl_frequency)
    Retrievestart event:
    QueryPerformanceCounter(idbl_start)
    Retrieveend event:
    Double ldbl_stop
    Dec{6} ldec_elapsed
    QueryPerformanceCounter(ldbl_stop)
    ldec_elapsed = (ldbl_stop - idbl_start) / idbl_frequency
    INSERT INTO RETRIEVAL_ACTIVITY_LOG
               ( DATAWINDOW_NAME, RETRIEVE_DATETIME, ROW_COUNT, ELAPSED_TIME )
        VALUES ( :this.DataObject, getdate(), :rowcount, :ldec_elapsed );

  • Monitoring and Alerting tools for Business Object Data Integrator

    Hi,
    We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
    Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
    Thanks.
    Raj.

    Hi Thomas
    Though both the tools objectives are for Data integration, the purpose for both tools are different.
    SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
    SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
    SAP BOBJ Data Integrator
    Bulk Data Integration
    Extraction Transformation and Loading
    Deals of huge volume of data
    SAP PI
    It is process based integration of application data
    It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
    SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
    SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
    The below differences will gives you more clarity
    Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
    Please reply back if you need more information.
    Regards
    Murthy

  • Is there any monitoring tool for web server and application server ?

    experts,
    I just want to know that is there any monitoring utility which being used to monitor the web server activities like threads web console session tracking and so on..
    I am using Jboss as my application server.If you suggest any monitoring tool for Jboss It would be helpful for me,

    You may use jConsole

  • Monitoring tool for SunFire V210

    Hello,
    We are running a couple of SunFire V210. These servers are doing their job and we never have to touch them, this is the main reason why we have no expertise on these servers.
    One of the servers indicators is actually yellow, so I reckon I must have some Hardware issue with it. Is there any monitoring tool available on Solaris to perform a diagnostic (equivalent od Dell OpenManage on Dell server)?
    Thanks a lot for your time.
    Fred

    There is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.

  • Monitoring tool for 10gAS

    Hi ,
    As my setup is running oracle 10g application server on Red hat Linux , iam looking for a monitoring tool to monitor my applications server, please suggest me which tool is best for monitoring and administrating
    regards
    Syed

    There is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.

  • Data Warehouse and ETL tools for data verification ?

    Data Warehouse and ETL tools for data verification ?
    How need to to data verification using ETL tool ? Also how to relate this thing to datawaehouse ?
    Thanks in Advance

    Hi  Shyamal Kumar,
    1)  BW it self  facilitates to do the ETL (Extraction Transformation Loading)  steps:
         example:
                     Extraction  - from SAP or other data bases
                     Transformation - using transfer rules, Updates rules
                     Loading  -  Loading into ODS, Cube, master data
    2) Typically used ETL tools in the industry are:
         a)   datastage from Ascential (owned by IBM)
         b)   Informatica
         c)   Mercator
    Regards, BB

  • Third Party tool for sap neteraver Java/EP administration

    Hi Experts,
    Do we have any third Party tool for SAP Neteweave -java or Portal administration like Wily?
    I am looking any tool that can generate graphical reports for System health cheack and all like Wily Interscope.
    Thanks
    Narpal

    Hi,
    I hope links like this are allowed with the new SDN rules. We use something called [Click Stream|http://www.sweetlets.com/click_stream.html].
    Quite nifty little tool and not even expensive.
    Regards,
    Andi

  • Web page composer (CMS) tool for SAP Netweaver 7.1 CE?

    Hi All,
    Can some body help me out finding the WPC tool for SAP Netweaver 7.1 CE version? All i can find in SAP portal is for WPC tool for SAP WAS 7.0 (2004s) version.
    Thanks,
    Kishore

    Hi,
    No you would find that business package also for 7.1. I doubt if SAP has released any business package for 7.1. CE 7.1 was especially meant for building and deploying composite applications. For all other usage types you would have to go for NW 2004s Portal aka EP 7.0
    Thanks,
    GLM

  • Testing Tools for SAP & SAP BIW

    Hi Forum ,
    will any body pls let me know what are available testing tools for SAP and SAP BIW? Which tool is popular and mostly used? Does any one provide training for this tools?
    Regards
    Suhel

    Hi,
    For SAP R/3 we use CATT and ECATT tools.
    Both are very useful tools and generally used for automated functional testing.Reduces a large amount of cost and human effort.
    Even you can convert or call external tool scripts like mercury QTP etc from ECATT and run from ECATT itself.Also you can use these tools with solution manager to get awesome effortless testing and test plan management.
    Check my weblogs.
    Part-1:Shows how to create a Parameterize CATT script.
    /people/community.user/blog/2007/02/05/create-and-migrate-catt-to-ecatt-part-1
    Part-2:Shows how to migrate CATT to ECATT script.
    /people/community.user/blog/2007/02/06/create-and-migrate-catt-to-ecatt-part-2
    1./people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
       This one shows the minimum configuration required for QTP and ECATT integration on client and server side.
    2./people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
       This one shows the standalone mode.e.g.mercury script is created and uploaded to ecatt and then executed from ecatt itself.Also,It is now possible to call this script from Solution manager.
    3./people/community.user/blog/2007/01/22/integrating-ecatt-mercury-qtp-part-3
       This one shows the integration mode which is most powerful as we can run QTP scripts from ECATT,Upload & download modify existing etc.
    Please reward points.

  • Development Tool for SAP EP 6.0

    Hi..
    I need to know what is the recommended tool for SAP EP6.0?? i know that SAP Netweaver Developer Studio 2.0 is available but is a Sneak Preview version and i don't know if its a released version...
    Regardss

    Hi Oscar,
    i answered this in your other thread concerning the Developer Studio/WAS product state.
    Regards
    Stefan

  • Monitoring tools for db

    Hi
    Would like to get suggestions from everyone for the best monitoring tool for oracle db

    Oracle Enterprise Manager
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Wi-Fi Network Monitoring Tool for Palm OS 5.x

    Hi there..
    I'm trying to develop a 802.11b/g monitor tool for a Palm device (Tungsten C) using J2ME and it turns out to be pretty difficult or maybe even impossible.. meaning, I'm stuck. Since the J2ME VM is optimized for CLDC/MIDP enabled devices, it can't execute parts of the bytecode I used from jpcap. Same while trying to use libpcap with Java (using wrapper classes), it needs some of the J2SE classes which are not or partly supported by J2ME. So I was wondering whether you guys might have some suggestions to solve my problem (using Java)?
    Thanx & Greets from Switzerland, Mike.

    Any particular bytecode? Like maybe to do with doubles/floats? Or is java classes required by libpcap that are missing? I'm guessing you need deeper access to the 802.11 libraries to do monitoring. All you'll have in MIDP is the 'http' connector protocol.

Maybe you are looking for