Shop floor rfid

Hi experts,
My company has decided to go for implementation of rfid on shopfloor.Please help me out on these points
1) why implement rfid on shopfloor?
2) benifits
3) how do we implement this scenario?
Thanks in advance
Regards,
Abhinay

Hi YJR,
All the documents for rfid revolve only on warehouse management. I was not able to get any information on rfid for shopfloor and even the standars sap configurations have been given for WM . SO please if you do have any more information which could completely clarify implementation and configuration of rfid for shopfloor in particular with any kind of case study will be of great help.
Thanks and Regards,
Abhinay

Similar Messages

  • Open item in PS reporting for shop floor order (same as PO's or PR's)

    Hi Guys,
    I have a question simple but I could till now find any solution in standard Report Writer or in Report Painter and I donu2019t want to create a specific report with an ABAP.
    In the system we have set quit complex projects with WBS, Networks and Activities. In each project there are also material which are standard material consumed from collective stock and specific material produced internally or purchased externally. The specific material are consumed through specific stock project.
    In Report Painter/Writer there are ratios for the open line items for purchase orders or requisitions but I am not able to find the same values for the shop floor orders made internally. Further I get the values for the planned shop floor orders and of course the complete actual (coming from both requirements) but I will know what are the values which are between (nat yet actual and plan).
    Has anybody already faced this situation or do anyone the solution to my problem?
    I thank you for your replies.
    Best regards

    Hi
    Please use table EKAB for your search instead of using EBAN Or EKKO
    Thanks & Regards
    Kishore

  • What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

    Hi All,
    Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
    Thanks

    Hi Surya,
    Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
    1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
    From Shop floor:
    shop floor --> SAP MII --> ECC
    1. Use either Web service or fetch data from DB and pass data to BAPI's  for sending to ECC through BLS transaction.
    Regards,
    Praveen Reddy

  • Print out of Shop Floor Papers in Default Language

    Hi Folks,
    User has a requirement to Print Shop Floor Papers in German language only irrespective of log on language.
    He does not want to manually select the German language in IW3D, as it picks the log on language. He wants it to be set as German language (DE)
    Please suggest.

    Hi,
        You can try to put DE as default login language for these users in SU01 , then by default printing will happen in DE by default ..
    regards
    pushpa

  • PM: Printing Task List Attachments When printing Shop Floor Papers

    Hi,
    We have PDF documents attached to our PM Task Lists. My requirement is to print out these PDF attachments when the shop floor papers (ie Maintenance Pick List) print. I am able to determine each of the files and their paths attached to the task list, but as of yet, I am unable to automatically print them. Can anyone point me in the right direction?
    Also note that using OLE to print the attachments seperately is not an option - The reason for this is that the shop floor papers would go to the SAP Spooler and the attachments would go to the network print server.
    Thanks!
    Scott

    In transaction OPK8, in forms uncheck the 'New List' check box for the List.
    Regards
    Ramanujan

  • Creating single spool request for printing all shop floor papers

    Hello PP Gurus,
    We are printing shop floor papers at the time of releasing production order using txn CO02. It creates individual spool request for printing different shop floor papers in the same orders . eg Pick list, goods receipt list etc.
    Is it possible to do the cofiguration setting to create only one spool request for all the different SF papers belong to same order.? If yes, please let me know the steps for customising this.
    Thanks for your help in advance.
    Regards & Thanks
    Rajesh D.

    In transaction OPK8, in forms uncheck the 'New List' check box for the List.
    Regards
    Ramanujan

  • SFDM Tool (Shop Floor Dispatching and Monitoring), Technical questions

    Hi Everybody,
    i am very excited to change knowledge here on the SCN.
    Right now I am analyzing the SFDM Tool (Shop Floor Dispatching and Monitoring) and need some more Information, which cannot be found via Internet research. I hope someone, who is familiar with the technical details can support me with answers.
    1. Master Data:
    - How does the Interchange of master data (such as machine capacities in terms of time/quantities or number of available machines) work between the       SFDM and the ERP System?
    - Is there a permanent interface between the SFDM and the master data in the ERP System?
    - If so, which of the master data are communicated?
    - Are there any limitations?
    - Do BAPIs (Business Application Programming Interface) play a role?
    - Is any further master data maintenance necessary, if the customer wants to implement SFDM?
    2. There is a backend component situated in the ERP System called "SFDM on ABAP 1.0". What is the aim of this component?
    3. Does the SFDM work with algorithms? If so, why?
    4. Does the SFDM consider other machines in the same production plant?
    5. Does it work over HANA?
    6. Any further functionalities or restrictions?

    Hi
    i wouldn't recommend SFDM for performance problem solving, if this is the issue you are facing.
    If this is because planners are "lost" with CM25 because of problems for Production Orders selection and so-on, then try SFDM.
    There is no new functionality compared to CM2x transactions within ERP.
    The benefits are clearly focused on design and user-friendliness:
    interactive logs
    easy configuration of settings and strategy compared to CM2x TCodes
    accessible details
    Please keep also in mind the fact that this is working for individual capacities (cf. Rough Guide) and related constraints in terms of capacity category (only 0001 is supported).
    Best regards.
    Pierre-Edouard

  • Shop floor Printing

    I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
    But when i make production order with same material ,  order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
    I get message After the next update the order will be printed.

    In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
    But  for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview  in co02 or co04. In that case, everytime i get message -After the next update the order will be printed

  • Shop floor paper printing

    Hi Team,
    I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
    How to use this transaction to print shop floor papers as per our requirement?
    I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
    I am beginner to use this transaction. So your valuable guidenace required.
    Thanks
    psk

    Hi chandan
    Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
    Regards
    J . Saravan

  • Status updation of Shop floor paper

    Hi expert
       I have created one Shop floor printout in Smart forms.i have created my own program.In the statndard printout
      status will be changed to PRT when the print out taken.I want to in coperate this feature in my program also.
    Please guide me
    Regards
    Manoj

    All configurations are maintained properly in OPK8. The print program has been changed to SAPSprint.
    Possible reasons or troubleshooting tips would be helpful.
    Jibitesh

  • CN22 - Print Shop Floor Papers for Network Orders

    Hi All,
    We are printing shop floor papers for network orders - the printers are setup, configuration is working fine.
    However, there is a sporadic error: when we select "Print" and then "Save" in CN22, the system pops up a window with the list of all network activities. However, for some reason, the first time this is done, only a few network activities appear on the list. If we close the pop up, then select "Print" and then "Save" again, the whole list appears. Has anyone encountered this before? I looked through OSS, but couldn't tell if any of the notes would be applicable to resolve the issue.

    Hi,
    I just went through the same problem. Don't know if it is still open.
    In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
    Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

  • Printing of shop floor papers

    hi guys,
    very good morning,
    plz explain in details the setting for printing shop floor papers with header and components with goods issue slip and confirmations slips,
    thanks in advance,
    Mohan

    In OPK8
    Name of the list - LG01, LG03, LK02, LV02
    Spool parameters - User and plant = *
    Reference operation - type - *, ref order = your order type
    Forms -
    LG01 - PSFC_OBJECT-LIST
    LG03 - PSFC_ZUGL-LIST
    LK02 - PSFC_GOOD-ISS-SL
    LV02 - PSFC_CONF-TICKET
    Print prig -
    LG01 - PPPROBJU
    LG03 - PPPRZUGL
    LK02 - PPPRWARS
    LV02 - PPPRRUEC
    List control for transaction
    ref order type, plant, MRP controler-*
    transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
    Flow control for transaction - all are online
    do this setting and then create Prod order/GI/Confirm and print
    come back if required.

  • Development of shop floor papers in Smartforms?

    Hello,
    To develop shop floor papares I am using standard for PSFC_STD_LAYOUT and print program PSFCOBJL for output type LG01. Is it possible to make the customization using Smartforms vs. SAPScript. In the configuration, I do not see any field which will accept Smartform object.

    Hello,
    Thank you for your reply.
    To clarify :
    For LG01 output type.
    In OPK8, under Reference order types> Print program>I added the driver Smartforms.
    Under Reference order types>Forms>LG01 type --> it still reads as PSFC_STD_LAYOUT. Do I need to keep this entry at all?
    In your example for setting user/plant settings you are calling the same form. Would in reality they will be different forms for each plan?
    read table caufvd_tab index 1.
    case caufvd_tab-werks.
    when '7200'.
    i_formname = 'ZSF_OBJECT_LIST1'.
    when '9200'.
    i_formname = 'ZSF_OBJECT_LIST2'.
    when others.
    i_formname = 'ZSF_OBJECT_LIST3'.
    endcase.
    Thanks you so much in advance.

  • Want to create inspection lots during In-House production (shop floor)

    Hello,
    As per our requirement we need to inspect a material multiple times (3-4 times) during shop floor production. It means we want to check a material say after operation 30, 50, 70 and 110 (of routing). We don't want to start operation 50 unless inspection of material after operation 30 is over. We don't want to start operation 70 unless inspection of material after operation 50 is over and so on.
    How can we attain this? We have assigned inspection type 03 in material master - quality management. We have assigned various MICs in concerned operations. Inspection lot is getting generated as soon as the release of production order takes place and it contains all MICs (and operations). We are able to make the result recording and defect recording for all operations at the beginning only.
    Is it possible to create multiple inspection lots for these operations and is it [possible to restrict the confirmation of later operation unless inspection of previous operation is over i.e. a usage decision is already carried out for previous operation.
    Puneet

    hi puneet,
    can u please let me know  what miracle u didi to resolve this issue?
    Thanks
    raghav

  • Material on shop floor

    Hi Experts,
    I want track the material lying on shop floor, Please look at the below scenario.
    For Finished Material  A(100 kg) Raw material X (120 kg) required as per Bom
    Production order Quantity for 200
    GI quantity for Order 240 kg, Confirmed Quantity 100 Kg
    So, 120 kg of Raw material lying on the floor, How to build the logic for this.
    Regards,
    Sudhakar.

    Hi Sudhakar,
                        As i understand there can be 2 simple situations of excess material issued
    1. your planned GI for raw material was 240 and you did the same but later on you found that your final yield of header material (finished) and GR was 100. So, you have used more raw material but did not get finished material enough to justify which will refelct in variances.
    2. The other situation is what you may be having where stores issued 240 but you actually used only 120 to produce 100 finished good. You can simply do a return delivery in MIGO against that document number and selecting the particular raw material for 120 kg. 120 kg raw material will then be reversed through 262 movement which will reflect in material movemnt reports.
    Regards
    Sm.

Maybe you are looking for