Shop paper print from Network

Dear All,
client need print of all assignment which is in network say person, material, activity, external service,
I trying to take print from CN22, i done all related configuration, activated print in control key,
configured in OPS0,print out not getting fron CN22, not even spool request is generating,
Kindly share your experiace or if any work around
Regards
Gajjen

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

Similar Messages

  • Shop paper printing issue in Quality notifications

    Hello All,
    I have a requirement where the user wants to print/fax quality notifications to a certain printer (printer 2) other than his regular printer defined in user defauls in SU01.
    In the IMG settings for quality notifications, I found the customizations for Print control. In the customization 'User-Dependent Print Control' (under 'Define Printer'), I created a new record with the user name, the shop paper corresponding to a quality notification and specified the printer name (printer 2).
    However, I notice that when I print this shop paper from within the quality notification, it prints it on the user default printer (defined in SU01) and not in the new printer (printer 2) defined in the above mentioned customization.
    Please let me know how I can configure the notifications to be printer on this new printer.
    Thanks,
    Rugmani

    Check the IMG in the following transaction OID1 & OID2  and OID3 for default printer
    Thanks
    S.N
    Edited by: SN on Jul 18, 2009 8:09 AM

  • Shop paper printing issue

    Hi,
    I am facing one issue . I am creating one PM order from Notification and while putting in process i am selecting two Shop papers for printing. I am able to see both the shop papers in print preview but one shop paper is not coming while printing ( only shop paper header is coming).
    but when creating same order directly and trying to print the same shop papers then both papers are getting printed .
    can any one hellp in this.....
    thanks !!!!!!!!!!!!!!!!!!!!!!!!!!!!

    answered

  • Shop paper printing

    hi all,
    1. We have created a f.loc and attached a Document to this f.loc now we r creating MO using this in ref f.loc , now when we r printing shop papers for MO we r getting doc attached to this ref f.loc also ... how can i avoid this...
    regrds
    pushpa

    hi,
    Just dismental the doc from ref.f loc. then it will pick up the shop paper that is attached to f loc..
    -MD

  • Can not print from network share.

    When a PDF document is printed from a network share whe're getting this error:
    Windows cannot find 'T:\temp\test.pdf'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
    This happens when a user click on the document with a right mouse click and select "print".
    But when the users copies it to his desktop and then select print with the right mouse click. The document print as normally. What could be the problem?
    we are using adobe reader 7.0.0

    Suggest that you check to make sure that you installed Bonjour Print Services for Windows v2.0.2 on the PC.
    Run the program and hopefully it will find your printer so you can select it and click to get things going.

  • How to print from  network

    I have a printer connected to an Imac, I bought a Macbook pro now also. I can't get the printer to print from the Macbook pro on a network (wireless). I have the Imac set to share and can get it to show up on the Macbook but cannot find the drivers for it. I downloaded the newest drivers from the Canon website and tried again, but it finds the printer but never prints. Do I have to put the entire program from the printer on the Macbook or do I need just the drivers. They do not show up in the list when it asks for the printer drivers. Canon IP6600D,

    According to the web site at Canon I see that they released a new driver in November which would be newer than the one that was included in the OS, is this the one you installed?
    iP6600D Printer Driver Ver. 4.8.3 (Mac OS X)
    ip6600dosx483ej7.dmg
    Photo Inkjet Printers - Photo Inkjet Printers - PIXMA Pro Professional Inkjet Printers - Photo Printer - PIXMA iP6600D - Canon USA Consumer Products
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDeta ilTabAct&fcategoryid=257&modelid=11864#DownloadDetailAct
    You need to include more information about your network before someone can help you set it up. "I have an imac I want to share printers with" is not enough info.
    Since this is an ip printer I might assume that you have the printer connected via firewire or ethernet to the imac.
    The imac is then connected wirelessly to what make and model of wireless router or modem?
    Direct connecting the printer to the computer and seeing if the driver is recognized and can print will tell you if you have the right driver.
    Trying to set it up in reverse will tell you if it is the wireless network, since the imac obviously can print to the printer and recognizes it.
    You can also set up a computer to computer wireless network in the airport menu to see if it is the router.

  • Can't print from networked PC running XP

    Hi. I have a Canon IP6700D attached via USB to my iMac. The iMac is running OS X 10.5.5.
    Also attached to my network is a PC running Windows XP SP3. So both machines are fully patched up.
    Printing from the iMac works flawlessly.
    I want to be able to print from the PC so I have shared the printer, turned off the firewall on the iMac set up the printer on the PC. The PC can see the printer and I can send print jobs to it. The iMac can see the print jobs coming over but nothing ever prints. Looking through the logs on the iMac tells me that the printer has worked but obviously it hasn't.
    The cups error.log shows -
    I [23/Sep/2008:09:49:40 +0100] [Job ???] Request file type is application/octet-stream.
    I [23/Sep/2008:09:49:40 +0100] [Job 13] Adding start banner page "none".
    I [23/Sep/2008:09:49:40 +0100] [Job 13] Adding end banner page "none".
    I [23/Sep/2008:09:49:40 +0100] [Job 13] File of type application/octet-stream queued by "alice".
    I [23/Sep/2008:09:49:40 +0100] [Job 13] Started filter /usr/libexec/cups/filter/gziptoany (PID 565)
    I [23/Sep/2008:09:49:40 +0100] [Job 13] Completed successfully.
    The access.log shows -
    localhost - - [23/Sep/2008:09:49:40 +0100] "POST / HTTP/1.1" 200 195 Get-Printer-Attributes client-error-not-found
    localhost - - [23/Sep/2008:09:49:40 +0100] "POST / HTTP/1.1" 200 168 CUPS-Get-Printers successful-ok
    localhost - - [23/Sep/2008:09:49:40 +0100] "POST / HTTP/1.1" 200 196 Get-Printer-Attributes successful-ok
    localhost - - [23/Sep/2008:09:49:40 +0100] "POST /printers/Canon_iP6700D HTTP/1.1" 200 3034669 Print-Job successful-ok
    Message was edited by: AndyMoore

    Your issue could be due to the driver being used on the Windows box. Usually, you have to use a Generic PostScript driver on the Windows computer rather than the supplied vendor driver. This will restrict the options you have for printing but at least you should be able to print.
    PaHu

  • Hp laserjet 100 color mfp m175 does not print from network nor via usb cable

    My hp laserjet 100 color mfp m175 just stopped printing last week. I have tried everything recommended but nothing works. I have re-install it both on wireless network and usb connection = nothing works. It prints all internal reports but nothing from any computer. I have 3 computers which I have tried to print from. It even does not print the test page. Please dont recommend to update drivers etc. as I have spend 2 whole days on this and nothing works!

    Hi @einar1854, 
    I see by your post that you are unable to print by a USB or Wireless connection on 3 different computers, but the printer will print the hardware self tests. I can help you with this.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    For the USB connection, follow these steps if the there are no errors from the Print and Scan Doctor.
    (once we get the printer printing this way, we can setup the wireless)
    Here are steps to remove the jobs from the spool folder and restart the print spooler.
    How to Clear Current Print Queue In Windows Vista & Windows 7.
    Follow the steps in this document to get to the device manager to check for the printer entries.
    How do I get into Windows Device Manager?
    Then click on Identifying problems in Windows Device Manager.
    In the list click on Universal Serial Bus controllers and look for USB mass storage device and USB printing support, (make sure any other printers are turned off or disconnected)
    Let me know what it showed in the device manager.
    Check to make sure the proper port is selected.
    Go to start, Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
    Make sure the USB has a check mark beside it, if not put the check mark there and apply the changes.
    Check the print Queue.
    In the Devices and Printers folder.
    Right-click the name of the product and then click See what's printing .
    Click the Printer button, then click Cancel All Documents if there are any documents in the queue.
    Click Yes to confirm the action.
    If documents remain in the print queue, restart the computer.
    Try printing again.
    What operating system are you using on the 3 computers? How to Find the Windows Edition and Version on Your Computer.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Print a configuration page to see also if the printer has a valid IPV4 address, so we have that information for when we setup the wireless. Printing a Configuration Report.
    Provide the first 3 sets of numbers in the IPV4 address.
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My office jet pro l7590, prints from network router. one pc can connect but it remains "offline"

    OJ Pro L7590.  Connected to my network via router.  All Win 7 PC's.  One laptop connected wirelessly.  Constantly shows Printer Offline.
    I'm able to access the printer's web server from this PC.  (on the network)  It shows up as "ready" on the Device Information tab.  However from the PC's printers menu, it is showing up as offline.  When I go throught the HP Officejet Pro AiO "add a device" menu, it fails to connect in the very last step.  This has been extremely frustrating.
    It obviously "sees" the printer on the network.  Windows connect a printer will work, but yields same result.  Have latest full feature driver/software download.
    Print Doctor does not see any problem.  truly baffled.  Wife's PC and she is the heaviest print user in the house.  Son's apple Mac book printed wirelessly with no effort.  (I'm not even sure he did anything special to make it work.)

    Make sure you have only one securtity system on your PC (for example if you have an old version of McAfee that you just left on there and added another system), uninstal the old, unused security system.
    Go to Start > All Programs > HP > [your printer model] > Uninstall. Run it.
    Restart your PC.
    Download and install the latest software for your printer from the "Support & Drivers" link at the top of this page.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Photo Printing from Networked Windows 7

    My HP Photosmart Printer is  USB connected to a Windows XP machine which is directly attached to the home network.  Also have a Windows 7 64 machine  wirelessly connected to the home network.  The Photosmart printer was added to the windows 7 machine and selected as the default printer and I have no problems printing to it from the Windows 7 machine except that I only recently found out that I cannot select from various photo paper sizes to print photos from the Windows 7 computer.  All various printing programes only give me a limited selection of paper sizes to choose from when configuing the printing - Letter, A4, A5 Envelope, Legal, etc.   The same programs on the XP machine offer the choice of various photo paper sizes to print to.  It seems as though all of the Photosmart configuration options are not available via the Windows 7 computer. Should I try to install the printer on the Windows 7 machine again, directly from a downloaded HP installation file?

    Hi,
    Well, looks like you have to install drivers on the Windows 7 machine (if supported) but I how do we know your printer to find out ?.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Color Laserjet 3600n won't print from network

    Our small office has an HP Color Laserjet 3600n that has worked great connected to the network via ethernet cable for many years. When we came in this morning it refused to work after a power outage last weekend, and print jobs would just remained trapped in the print queue with either "printer unavailable" or "printer is busy" messages. No error messages appearred on the printer, and it prints fine from an attached USB cable. I verified the network cables, and am even able to access the printer's web interface a-ok via it's web address. It normally operated on all the default settings, I believe, and I can't figure out what else could be the problem other than a hardware fault. Any clues? We have a bunch of toner cartridges and would hate to have to buy a new unit now.

    Hi,
    Please follow in the link below :
    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?lang=en&cc=us&taskId=110&prodSeriesId=​...
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • I can't print from network computer while in bootcamp

    Although I can see the network printer while in Windows 7 on bootcamp, I can't get it to print.  I am trying to print reports from Quicken 2012.  Any ideas?  

    Then this could be a driver issue. What brand and model of printer do you have? I want to check what driver options are available for this model.
    The other possible cause is the protocol you have used, although Windows is often better at selecting the correct protocol to use compared to Mac. To check what you are using on Windows, open Devices and Printers and select the printer. Then right-click its icon and select Printer Properties. Then select the Ports tab and then click on Configure Port. Is the queue configured to use LPD or RAW?

  • Upgrade to 10.4.6 and Now I can't file share and print from network

    Problem. When both computers were running OS 10.3.9 I could share files back and forth and print no problem.
    Now that I have upgraded the Pismo to 10.4.6, I don't the other computer and can't print as it doesn't see the printer either.
    Now when I put both computers on the same router, ie the WRT54G, I can share and print.
    Computer 1 G4 w/upgrade to 1mhz, OS 10.3.9(all up to date) connected to a Linksys Router BEFSR41 which is connected to a cable modem. I have a HP 5740 Deskjet printer connected to the CPU.
    Computer 2 G3 Pismo 500, OS 10.4.6 with Sonnet ARia Extreme 54G Wireless cardbus card, and a Linksys WRT54G Router. The WRT54G is connected to the BEFSR41 Router.
    Network set up.
    cable modem to BEFSR41 to ports in use, one to G4 and one to the WRT54G. the WRT54G connects to pismo via wireless card.
    Any help will be appreciated.
    Thanks

    Network set up.
    cable modem to BEFSR41 to ports in use, one to G4 and one to the WRT54G. the WRT54G connects to pismo via wireless card.
    If your using the wrt54g as router and also connecting it to another router then you have 2 computers on different subnets. To share files and printers locally both computers should be on the same subnet.
    Why use the BEFSR41 at all you could just use the wrt54g on its own. Otherwise you will have to setup the wrt54g as an access point only. To do that connect the cable from from the BEFSR41 to one of the 4 network ports on the wrt54g don't use its internet port.

  • Hp laserjet 1022n printer from network not installing on windows 7 64 bit

    lj 1022n printer not installing on win 7 64bit as network printer. I have tried to inst. upd64bit driver but failure.

    Hi,
    Please update the printer driver with correct version and compatible with Windows version.
    Then Open "Devices and Printers" and right click on "Printing Prefences"
    Create new Printing Shotcuts as below.
    Then go to the other tab Finishing and do exactly like the image.
    Apply and Save.
    Your Booklet printing and shotcuts is ready. now you can print.
    Please let me know if this is being useful for you.

  • Can't print from Network

    I have an iMac 24" 2.8 GHz Intel Core 2 Duo running 10.5.5 and my wife has a Tangerine iMac running 10.3.9. We are connected via built in ethernet I have the printer (HP 960c) attached to my computer. We can access each other's computers fine but she cannot print to my printer. Her system recognizes the printer but printing jobs go off into cyberspace some where. Any suggestions?

    Doug - sorry for coming in late.
    There are at least 5 ways to connect to a printer on a Mac. Mac-to-Mac sharing is the easiest because you get to use the printer's driver. The other methods rely on the Mac queue's standard functionality - incoming postscript is converted to code for the particular printer and sent to the printer by the driver.
    Try this for troubleshooting:
    Find the printer queue name by doing Get/Show Info on the printer in the Printer Setup list on the tangerine Mac.
    On your computer, Add , select IP printer, then IPP. Enter the tangerine's IP address plus that queue name. Select generic postscript for driver.
    Finish and try printing.

Maybe you are looking for