Shop paper printing issue

Hi,
I am facing one issue . I am creating one PM order from Notification and while putting in process i am selecting two Shop papers for printing. I am able to see both the shop papers in print preview but one shop paper is not coming while printing ( only shop paper header is coming).
but when creating same order directly and trying to print the same shop papers then both papers are getting printed .
can any one hellp in this.....
thanks !!!!!!!!!!!!!!!!!!!!!!!!!!!!

answered

Similar Messages

Shop paper printing issue in Quality notifications

Hello All,
I have a requirement where the user wants to print/fax quality notifications to a certain printer (printer 2) other than his regular printer defined in user defauls in SU01.
In the IMG settings for quality notifications, I found the customizations for Print control. In the customization 'User-Dependent Print Control' (under 'Define Printer'), I created a new record with the user name, the shop paper corresponding to a quality notification and specified the printer name (printer 2).
However, I notice that when I print this shop paper from within the quality notification, it prints it on the user default printer (defined in SU01) and not in the new printer (printer 2) defined in the above mentioned customization.
Please let me know how I can configure the notifications to be printer on this new printer.
Thanks,
Rugmani

Check the IMG in the following transaction OID1 & OID2 and OID3 for default printer
Thanks
S.N
Edited by: SN on Jul 18, 2009 8:09 AM

Shop paper printing

hi all,
1. We have created a f.loc and attached a Document to this f.loc now we r creating MO using this in ref f.loc , now when we r printing shop papers for MO we r getting doc attached to this ref f.loc also ... how can i avoid this...
regrds
pushpa

hi,
Just dismental the doc from ref.f loc. then it will pick up the shop paper that is attached to f loc..
-MD

Shop paper print from Network

Dear All,
client need print of all assignment which is in network say person, material, activity, external service,
I trying to take print from CN22, i done all related configuration, activated print in control key,
configured in OPS0,print out not getting fron CN22, not even spool request is generating,
Kindly share your experiace or if any work around
Regards
Gajjen

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

Need to avoid pop-up screen while printing shop paper

hi all ,
we have develop a z program to print shop paper for selected orders based on selection criteria. Once the output displayed (out put contain shop paper , printer,order no and operation no )for selection criteria user will select one or many records from output and click on print button. Once user select the print button the spool request has to be created,
problem :- when we select the print button in output display we are getting print pop-up screen
OutputDevice
Frontend printer HP
Copies           1
Page selection
Name
Title
Authorization
Spool retention pe
Archiving mode
   Thanks in advance
jayasankar

hi all ,
we have develop a z program to print shop paper for selected orders based on selection criteria. Once the output displayed (out put contain shop paper , printer,order no and operation no )for selection criteria user will select one or many records from output and click on print button. Once user select the print button the spool request has to be created,
problem :- when we select the print button in output display we are getting print pop-up screen
OutputDevice
Frontend printer HP
Copies           1
Page selection
Name
Title
Authorization
Spool retention pe
Archiving mode
   Thanks in advance
jayasankar

PM shop paper smartform

Hi guys,
Does anyone know of standard SAP smartform for Shop paper printing (Maintenance Work Order) from transaction IW32. A standard SAPscript PM_COMMON exists but I would like to know if there is a standard SAP smartform equivalent to that.
Thanks,
Pruthvi

Hi Pruthvi,
There is no Smartform avilable for shop floor cards. But you can create a Zprogram(which will trigger a smartform) and assign that to your shop cards 9008, 9009 and so on..
Lanka

Shop Paper send email issue

Hi all,
There is a customised SAPscript form for our special shop papers for PM, printable from PM order using transaction IW32.
So far everything is ok. The new shop paper works and if I go in IW32 Order -> Print -> Order then I can see very nice preview. Also,the necessary settings have been done to send mail as PDF attachment.The mail is being sent correctly along with the subject line,however in case of change of language to Finnish,the subject line is being sent blank.Is there any setting required for language change?
Thanks in advance for any answer.
(we have SAP ECC6.0)

Issue resolved on my own

PM Shop paper cannot be print with direct "Print/Fax"

Hi everybody,
I have a issue when printing work order, the PM work order cannot be printed by clicking the "Print/Fax" button, but it can be print by clicking the button "Print" in the print preview screen. and if I deselect the "print immediately" parameter in select shop paper screen, no recorde was created in SP01.
how to fix this issue,
regards

Alan,
This is spookily close to this post: PM Shop paper not able to print with direct button
PeteA

How to print equipment documents in shop paper

Hi Gurus,
I`ve maintain DMS to some of the equipments and those were scheduled in maintenace plans.SO whenever work order gets created based on the schedule....documents should also automatically get printed along wih the shop paper.
This is my requirement because users dont want to spend time on printing the documents manually.
Any user exits ?
Help would greatly appreciated with rewards.
Regards,
Vijay

Vijay,
We did something similar but in user-exit IWO10009 (at save).
The reason for using this user-exit and not the BADI described above is because we required a popup box displaying the options for printing. The user could then choose which documents to print.
Pete
[www.pjas.com]

Paper Size issues with CreatePDF Desktop Printer

Are there any known paper size issues with PDFs created using Acrobat.com's CreatePDF Desktop Printer?
I've performed limited testing with a trial subscription, in preparation for a rollout to several clients.
Standard paper size in this country is A4, not Letter. The desktop printer was created manually on a Windows XP system following the instructions in document cpsid_86984. MS Word was then used to print a Word document to the virtual printer. Paper Size in Word's Page Setup was correctly set to A4. However the resultant PDF file was Letter size, causing the top of each page to be truncated.
I then looked at the Properties of the printer, and found that it was using an "HP Color LaserJet PS" driver (self-chosen by the printer install procedure). Its Paper Size was also set to A4. Word does override some printer driver settings, but in this case both the application and the printer were set to A4, so there should have been no issue.
On a hunch, I then changed the CreatePDF printer driver to a Xerox Phaser, as suggested in the above Adobe document for other versions of Windows. (Couldn't find the recommended "Xerox Phaser 6120 PS", so chose the 1235 PS model instead.) After confirming that it too was set for A4, I repeated the test using the same Word document. This time the result was fine.
While I seem to have solved the issue on this occasion, I have not been able to do sufficient testing with a 5-PDF trial, and wish to avoid similar problems with the future live users, all of which use Word and A4 paper. Any information or recommendations would be appreciated. Also, is there any information available on the service's sensitivity to different printer drivers used with the CreatePDF's printer definition? And can we assume that the alternative "Upload and Convert" procedure correctly selects output paper size from the settings of an uploaded document?
PS - The newly-revised doc cpsid_86984 still seems to need further revising. Vista and Windows 7 instructions have now been split. I tried the new Vista instructions on a Vista SP2 PC and found that step 6 appears to be out of place - there was no provision to enter Adobe ID and password at this stage. It appears that, as with XP and Win7, one must configure the printer after it is installed (and not just if changing the ID or password, as stated in the document).

Thank you, Rebecca.
The plot thickens a little, given that it was the same unaltered Word document that first created a letter-size PDF, but correctly created an A4-size PDF after the driver was changed from the HP Color Laser PS to a Xerox Phaser. I thought that the answer may lie in your comment that "it'll get complicated if there is a particular driver selected in the process of manually installing the PDF desktop printer". But that HP driver was not (consciously) selected - it became part of the printer definition when the manual install instructions were followed.
However I haven't yet had a chance to try a different XP system, and given that you haven't been able to reproduce the issue (thank you for trying), I will assume for the time being that it might have been a spurious problem that won't recur. I'll take your point about using the installer, though when the opportunity arises I might try to satisfy my cursed curiosity by experimenting further with the manual install. If I come up with anything of interest, I'll post again.

Shop floor paper printing

Hi Team,
I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
How to use this transaction to print shop floor papers as per our requirement?
I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
I am beginner to use this transaction. So your valuable guidenace required.
Thanks
psk

Hi chandan
Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
Regards
J . Saravan

IW38 printing several MO with only one shop paper choice

Dear Gurus,
I would like to use the t-code IW38 to print several MO on same time however I would like also to select the shop paper just one time instead many time for each MO.
If I deselect all document type on t-code OIDG the sap asking me for each order what kind of shop paper I would to select. If I have a lot of MO it becomes tiring.
So I want to select the list of MO and select the shop paper to be printed only once. Is there anyway to me get it?
Best regards,
Wagner Silva

Hi Wagner
You can try one thing which is in the default settings, set up the printer settings as follows. Make sure that the Display Dialogue box is not selected. Remove if it is selected!
The setting can be done for each user by IW32 --> Select any order --> Extras --> Settings --> Deafult Values --> General TAB --> Display Print Dialog Box SHOULD NOT BE SELECTED.
I hope this will work.
Cheers
Savas
Message was edited by: Savas Yazici

Printing Imediately using Shop Paper

Hi all,
I have a requirement to change a standard form for IW3D. Since the form is quite complicated I decided to change the print program from using SAP SCRIPT to using SMARTFORM.
I have manage to do this and all is running well, except the print parameter in the shop paper seems to have no effect on the printing procees (e.g. When I tick print immediately the printing process didn't happen immediately, no effect).
I tried passing all the print parameter from the original print program to the SMARTFORM, but it seems to have no effect.
Does anyone have any experience on this matter? Your help is kindly appreciated.
Many thanks in advcance.
Best Regards,
Fandi

answered

Paper jam issues when duplex printing

i am having a paper jamming issue whenever i attempt duplex printing. As of now my machine is unable to print due to a paper jam. I have removed all the paper within the machine and the error message "carriage jam" is still appearing. Please help

By the way, a carriage jam is different from a paper jam. A carriage jam indicates the carriage cannot move, or possibly that the sensor that detects the carriage movement has been damaged.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to AUTO print DMS with Shop Paper without 3rd party software?

Since standard SAP cannot AUTOMATICALLY print DMS with shop paper.
Is there a way to AUTOMATICALLY print DMS with shop paper without using 3rd party software ? I've heard that there's a user exit or Function Modules that we can use so this will be possible. We don't really want to deal with 3rd party software if we can avoid it.
Has anyone resolved this problem without using 3rd party software?
Thank you,
Sam

It would easier to get an ABAPER to debug the manual process and then use those function modules etc in the modified program.
The ability to print attached documents exists as a manual process of navigate and click, the process is as follows:
1.     Access transaction IW32 (or IW33).
2.     Enter order number (initial screen).
3.     Click enter (change order central header screen).
4.     Select the operations tab page (change order operation overview screen).
5.     Select the relevant operation (change order operation overview screen).
6.     Click the PRT icon (change order operation overview screen).
7.     Select the PRT (PRT list of operation screen).
8.     Click the PRT display button (PRT list of operation screen).
9.     Click the print button (display document screen).
The process prerequisites are:
     Work order created with assigned PRT document.
     PRT documents.
     DMS configuration to allow document to be opened and printed.

Shop paper printing issue

Similar Messages

Maybe you are looking for