Short black screen before play

When I preview my Encore bluray project and push a menu button, the screen goes black for a quarter of a second before the chosen movie begins.
How can I avoid this?

Hunt,
It ws only a preview issue. On the final burn there was no black flash.
I have a question regarding transcoding, don´t know if you can help:
I encode video with Compressor, using a custom preset, MPEG2, 1920x1080 25P which gives me a m2v file.
When importing this file to Encore, the BluRay transcode status shows "Untranscoded", and it looks like the file is transcoded when I build the disc.
Am I right, that the transcode status should show "Don't transcode" if the imported video is correct encoded from Compressor?
Best regards
Bjorn
Den 20/03/2011 kl. 22.18 skrev Bill Hunt:
Welcome to the forum.
Have you done a test Burn to Folder, or Burn to Disc, to check whether it's ONLY an issue in Preview? Preview is but an emulation, and a "black flash" is one of the common drawbacks to testing with it. The "black flashes" seldom appear in the actual file. Note: if you do a Burn to Disc, use RW media, for the test, so you don't burn "coasters." Just do not use the RW for delivery - testing only.
Good luck,
Hunt
>

Similar Messages

  • Dell Latitude E6510 Black screen before posting during cold boot

    When I cold boot my laptop,I get about 10sec of black screen before the laptop posts..1st gen. i5 core,4gb DDR3 80GB Intel X25-M Nvidia NVS 3100 graphics with 512MB RAM.

    I received a new XPS13 9343 last week and unpacked it yesterday (Friday 4/24/2015). When I first opened the lid and powered it up there was no display. It was completely black, not blank. I went to close the lid and when slightly jarring it I noticed that the initial screen appeared but briefly.
    After analyzing the symptom I decided:
    It is a physical issue - not firmware related
    While I apply very slight pressure compressing the lower right corner of the display it will function
    It is the LCD backlight that is intermittent as the image is perfect otherwise and turns on an off with pressure not quite instantaneously
    Once the laptop warms (2 minutes) the display becomes completely reliable and unaffected by lid motion
    My bet is that this is a problem with the conductive rubber mounting strip used to make the many connections to the LCD panel. Envision a very thin foam double sided tape with the characteristic that current can only flow front to back through the thin dimension of the tape. Adjacent pads (connection points) are not shorted by the tape and pads (carefully) aligned on the other side of the tape are connected. Its very ingenious actually.
    In my case probably the circuit for the LCD backlight is at the end of a strip on the bottom right. It didn't properly bond during production. Probably once current flows through it (when I compress the display or hold the lid in just the right position) the adhesive warms and grabs hold. It probably doesn't take much to pass the low currents involved. I wonder if after some use or exposure to warmer operating conditions if it might not finally bond permanently and the issue go away?
    Anyway this is what happens when you present an engineer with a problem, it gets over analyzed. You would like to think that within hours of posting this a bunch of production engineers will run over to all of the fixtures in their facilities that are used to assemble the displays and make sure there isn't one out of adjustment. Uneven clamping force or some such science.
    The problem now for me is in finding out if I need to replace it and how much of a pain that is going to be. Unfortunately now I don't want to migrate from my prior laptop if I am going to have to send this one off someplace.
    In some way this represents a security feature. Haha. I mean there is a trick to getting the thing to come up that I would only know. Another level of security at no extra charge. Still, one wishes to not have a quality concern floating in the back of your mind.
    But, this might be your issue too. Anyone else have this experience?

  • Black screen while playing video in itunes

    I am currently running itunes 11.1.2.32 on a windows 8.1 (64 bit) pc. I had to reinstall itunes when switching from 8.1 preview to 8.1 due to download issues. I now have a black screen when playing videos in itunes. Audio still works. Suggestions?

    I've had the same problem. Tried switching from the built in Intel video to an nVidia graphics card, reinstalled cursed a lot.
    Finally got it working the hard ware. Built a virtual XP machine (like the SP support system in Windows 7). Installed itunes in the virtual machine and can now watch my movies and tv shows. Both itunes and Windows 8.1 seem to be "not ready for prime time". I wish MS wouldn't have tried to make a computer look like a cell phone/pad.

  • .mov from 4S is black screen when played with QT and QT 7/lion

    Q1. .mov from 4S is black screen when played with QT and QT 7 on lion/mac book pro.
    Q2   Also I want to burn it in DVD with common video format. Any recomment free burner software?
    Very very very urgent!! Please help.

    Hello there,
    I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
    Also when it's trying to reboot in windows a blue window appears,says something about drivers  and it is counting something (79.78...till100)but  I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
    I m sorry if I confused you with my english...
    If anyone knows please help!
    Thanks

  • TS1702 Downloaded Air Supremacy game app and only get company logo or black screen before iPad returns to home screen. Checked iPad and app up to date, no better. Any suggestions?

    Downloaded Air Supremacy game app and only get company logo or a black screen before the app closes and goes back to my home screen. Checked that iPad and game are latest versions of software and restarted the iPad still with no luck. Any suggestions.

    Have you tried a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Black screen before Windows installation

    I have already installed Windows 7 before and I had no problems with the installation. The reason why I decided to reinstall Windows is when I was trying to start BootCamp I only got black screen. This started to happen after  I did hard reboot. I did this because Windows freezed.
    I deleted Windows on my MacBook and then I tried to install Windows again. After BootCamp Assistant splited hard drive (1st part for Mac OS X,  2nd part for Windows) OS X shutted down and after that I heard Mac sound (sound when You start Mac). And then I can only see black screen ( also there was a console cursor for a second ).
    Why black screen started to happen?
    and
    How can I avoid it?

     
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Why do I have a black screen when playing back TV shows?

    I am running Win 7, and iTunes 10.7.  Recently, when trying to play back episodes on my PC of a TV show that I purchased, the playback screen is black, with no video or audio.  The time counter is counting down the clock as if it's playing, but there's nothing to see or hear.  If I re-boot my PC, the show will play properly, but the black-screen instance has occurred several times now, and I'd like to figure out why it's happening at all.

    Because there is a problem. Want to try fix it?
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Black screen before going to sleep

    With the "dim screen..." option box UNCHECKED, instead of dimming the screen before putting the display to sleep, the screen turns black. The same kinda black as if you dim your backlight to 0.
    So I can still see some windows etc... but the backlight is just not working.
    This is very annoying cause it turns my screen to black after one minute when I am on the battery and it makes it impossible to read a text.
    I believe this is a bug... what do you think, o you have the same problem?
    PS: Of course my sleep setting is set to a much longer time (15 minutes) so it is not related to that.

    Time stamp                Domain             
    Message                                                                   
    Duration 
    Delay    
    ==========                ======             
    =======                                                                   
    ======== 
    =====    
    UUID: Dxxxxxxxx-xxxxx-xxxxx-xxxxxx-xxxxxxxxxx
    7/6/13 11:02:32 PM GMT+0 Sleep             
    Software Sleep Sleep: Using AC (Charge:100%)                             
    154 secs 
    7/6/13 11:02:32 PM GMT+0 Timedout           
    Kernel: Response from TracSrvWrapper timed out                           
    30000 ms 
    7/6/13 11:02:33 PM GMT+0 SlowResponse       
    PMConnection: Response from mDNSResponder is slow (powercaps:0x0)         
    1191 ms 
    7/6/13 11:02:33 PM GMT+0 WakeRequests       
    Clients requested wake events: None                                       
    7/6/13 11:05:06 PM GMT+0 Wake               
    Wake due to EHC1/HID Activity: Using AC (Charge:100%)                     
    653 secs 
    Sleep/Wakes since boot:4   Dark Wake Count in this sleep cycle:0
    I used those command "pmset -g log"  to get this log and found the problem.

  • Flash player show black screen on playing streaming video.

    Hello All,
                   I'm using Bitgravity live stream in flash AS3.0. The video stream work pecfectly in FP 9. I have recently migrated to Flash CS5. I have published my player in Flash player 10. It provide better rendering and high video quality, almost like HD. But there is some issue while playing video stream in FP 10. I''m using netstream. publish(). method. Some time the Flash player show totaly black screen and but audio still plays. If we press F5 on browser it may come or may not work fine.
    Case1: Customer 1 using FP 10 turn off Hardware rendering and black out screen ploblem solved.
    Case2: Customer 2 using FP 10 truned on Hardware rendering the Black out screen problem resolved.
    I'm confused with the solution that i should provide to my customer, since it is very difficult to debug the error. For the time i have switched back to FP9 + CS4.
    How can we determine the issue. ?
    Does GPU capability is having some pipeline issue with decoding the incoming H.264 packets.with acc audio? Or the stream have some issue that flash is unable to recognize at first time?
    Thanks,
    Ajitpal

    Sounds like you've got malware alright.
    As far as image burning, I ONLY use Roxio Media Creator, or PowerISO to burn images to disk. Nero will do it, but I can't run it with Roxio (conflicts).
    You need to do thorough virus scan and cleanup.

  • Sat A665 - S6092 black screen before windows startup

    I got a problem, it is strange. Sometimes windows starts and sometimes it doesnt. I normally press the power button, then it appear toshiba logo, then it appears a little line blinking at the top of the black screen and then it goes completely black, nothing happens. If I press ctrl + alt + del it reboots, but it I press the power button it turns off roughly. Sometimes I reboot 2 times and windows starts, sometimes 10 times and it starts, and sometimes it starts normally. What can I do? Thank you

    I have the same problem with my Sat665d for about 1mth. Finally it got worse and worse. Problem is that your hard drive is failing and that you should back up your files asap while you still can. Toshiba is replacing my hard drive. I'm packing my laptop in the box they sent me. It's all prepaid shipping etc. Fed ex is picking it up in the morning. My laptop was under the 1yr manufactures warranty. So i hope yours is under warranty,otherwise you have to pay for new hard drive. They are relatively cheap about $60.00 -$100.00 depending how big it is. I hope this helps you before it's to late.

  • Videos stopped playing... I get a black screen then plays for a few seconds and freezes.  Have downloaded the latest Adobe flash player and it did not help.

    Videos stopped playing correctly.  Now I get a black screen, then a few seconds of video and it freezes.  I downloaded the latest Adobe Flash player
    and it did not change anything.  Thanks for your help. CP

    One of the following steps should help.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:  > "Enable Plug-ins".
           or
        Internet Plug-ins >  "Allow all other plug-ins
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes beside all items.
        Check the box beside "Remove all website data".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • Black screen but plays audio

    Hey, I have had quicktime for a long time, but all of a sudden, it plays the audio and it has a black screen. I NEED HELP! I use quicktime for business presentations and I need it back up and running.

    There's a similar thread, "Apple.com > Support > Discussions > QuickTime > QuickTime for Windows, Topic : Black screen??".
    I posted the same reply below in the above thread.
    This could be relevent.
    I was using Internet Explorer 7.0 to check out the QuickTime sound recordings on http://www.apple.com/ipodshuffle/voiceover.html. Hitting one play button for the first time didn't cause any trouble, but from the second button on, inside the Internet Explorer window got painted in black, displaying only the play button while playing the sound.
    I updated QuickTime 7.5 to 7.6, but that didn't solve the problem.
    I tried viewing the page in Full Screen view (hit F11 to switch back-and-forth), and it worked fine.
    I tried watching a preview on the Apple website; it displayed fine for me though.

  • FF 8 short black screen during startup

    Not a big deal but a black screen and then inverted (negative) image appears when I start Firefox. This happens very fast, in less than half a second but it is noticeable and I haven't seen it before with previous versions. Is there any fix for this? Thanks!

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

  • How to get rid of black screen when playing videos

    When I try to play any videos on PC all that will show is a black screen.
    Can here the audio but video screen is completely black.
    Solutions???

    Hello there JK74,
    Here is a great article for troubleshooting issues with either QuickTime or iTunes playing back videos.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    It might be a bit lengthy but it is pretty thorough.
    Regards,
    Sterling

  • MSI 6850 OC Edition Black Screen when playing Crysis Warhead

    Random crashes in Crysis Warhead DX10.  It also happened once in Command and Conquer 3 Kanes Wrath DX9.
    I get a black screen monitor turns off and the sound goes buzz the system then hangs.  The reset button wont work.  The MSI LED BIOS code displays C2.   Power off then on.  The system is stable 2 hours Prime95 CPU only hits 150F.  Ran Furmark GPU stable test 1 hour.  Turned the fan to manual and set to high the gpu stays around 70c with Furmark GPU.  Memtest overnight.  No problems.  Tried CAT 10.12 10.11 10.10 the MSI downloaded version.  Nothing.  Clean drivers out.  I updated SPTD to  1.75 from per another posts advice.   Seems something is really wrong with the drivers and rendering certain objects reboots the card.  The card is rock solid on stablity tests and Futuremarks benchtests. 
    Nvidia Physx game driver uninstalled.  Still crashes
    Now testing it with SPTD uninstalled.  Running tests have my doubts.
    The system
    AMD 1090T no OC
    MSI 890FX
    OCZ AMD Special 4GB 1600
    MSI 6850 Stock OC Version
    WIN 7 x64 Pro

    Quote from: brains1 on 05-January-11, 06:59:12
    2 hour test ran.  No errors.  Seems like a wimpy test.  The GPU Temp never went over 42c.  360-370 FPS. 
    Already ran a 2 hour test with Furmark GPU with out errors or artifacts. 2 hour CPU only Prime95 test.  Memtest over night.  System is stable by all accounts.  Just when playing some games it will completely mess the system up.
    For those MSI motherboard people.  Why would the LED Motherboard light say 2C or maybe it was C2.  Why would the system not reboot with the reset button.  The 6850 card some how goes in to lala land.
    Quote
    2 hour CPU only Prime95 test.
    which one? Can you test with Orthos?
    Run Orthos: http://sp2004.fre3.com/beta/orthos_exe_20060420.cab
    Select priority 9,
    Select "Large, in-places FFT's",
    Then click on "Start" and let's test overnight.
    See if your machine can survive
    Quote
    MSI 890FX
    OCZ AMD Special 4GB 1600
    how they are running?
    show us screenshots from cpu-z memory page

Maybe you are looking for