Short cut to reach bottom of web page

I subscribe to a web site (Joss & Main) which is quite lengthy in content. I would like a short cut to reach the very end providing either "contact info" or to work my way backwards.
I also seek a short cut to reach the very top when I am at the bottom of the site.
Thanks in advance for any assistance.

Carolyn's advice works with the full Apple keyboard. For others, this article tells how:
http://brokensecrets.com/2011/01/10/finding-home-and-end-on-a-mac-keyboard/

Similar Messages

How do I resize my screen? I cant see the control f menu or the bottom of web pages unless I "restore down" to a smaller window size.

I cant see the control f menu or the bottom of web pages unless I "restore down" to a smaller window size.

The problem is when you maximize the window -- it is even bigger than the area available? Or the problem is that normal windows are always too large and have to be resized manually?

Table disappears as entered data reaches bottom of the page

Hi All,
Mac newbie so be nice to me lol.
Imported a doc from Office 2007 (boo hiss)
Has a table with 3 columns, as I enter data into each column in Office as I reach the bottom of the page a new page is created and the table just carries on into the next page as I enter more data.
When I do the same in Pages 08 once the table has grown to the bottom of the page the whole thing jumps down one page and the bottom of the table just disappears!!
If any of you want to see the doc in ?? I can email the file for you to try it.
Any ideas would be welcomed, I am really struggling with it
Thanks
Mark

Welcome to Apple Discussions
I don't think I need to see the doc. Rows/cells in Pages tables can't cross the page boundary. If the row is bigger than a page, it will just disappear. Try creating a new row for additional information.

Safari cutting off right side of web pages.

I have been using Safari on iPad to view web pages from my company's schedule bidding system. I have had no problems viewing these pages in the past, however now the right side of the web page is being cut off, I am unable to view information or use control buttons that are on the right side of the web page. I have several colleagues using safari on the iPad that are not having the problem so thinking it is a setting on my iPad and not the company website.
Any Ideas?

The Canon A630 ... (mainly because of the outstanding picture quality which you were able to show me, the variety of zoom levels, not to mention it's nearly half the cost). Although the other camera is a higher MP rating; that in itself didn't sell me on a newer model).

I upgraded to OS X Yosemite, and now every time I print, it cuts off the bottom of the page, and is missing content.

Ever since I updated to OS X Yosemite, I have had trouble printing. I don't just use one program. I use many. Printing from the internet, Word, Preview, everything. It just won't print correctly. It has no margin at the bottom of the page, and continues as though theres more paper, and is therefore missing content. It's so annoying. I'm going out of my mind. what do I do?

Printers not behaving? Reset them and start from scratch | MacIssues
OS X- Printer and scanner software available for download

Code appearing on bottom of web pages

I am in the process of releasing my web site and code like
this is appearing on the bottom of all my pages. How do I get rid
of it. Thanks Cyndee
-----------------------------130683370316387884521639739989
Content-Disposition: form-data; name="userfile"; filename=""
Content-Type: application/octet-stream

If you have NO code below your html tag, and if you do,
please show it
to us, then it sure looks like this is being generated by
your host.
Not only is it adding the text your reported, but other code
as well:
-----------------------------128781384519470984491527819357
Content-Disposition: form-data; name="userfile"; filename=""
Content-Type: application/octet-stream
<script
language="JavaScript"
src="
http://us.js2.yimg.com/us.js.yimg.com/lib/smb/js/hosting/cp/js_source/geov2_001.js"></scri pt><script
language="javascript">geovisit();</script><noscript><img
src="
http://visit.webhosting.yahoo.com/visit.gif?us1190588791"
alt="setstats" border="0" width="1"
height="1"></noscript>
So, if in fact you have no script or other code after your
closing html
tag, then perhaps you might speak to your host's Tech
Support.
E. Michael Brandt
www.divaHTML.com
divaPOP : standards-compliant popup windows
divaGPS : you-are-here menu highlighting
divaFAQ : FAQ pages with pizazz
www.valleywebdesigns.com
JustSo PictureWindow
JustSo PhotoAlbum

How to stop firefox from blocking secure info from reaching non-secure web page? It's causing purchased products to not be delivered

This is a new problem that is showing up not only in my software but many others. My software uses PayPal to process online purchases. PayPal is an secure site. When the customer returns to our site they land on a thank you page. The thank you page must receive the ipn message from PayPal to know what product download page to load for the customer so they receive the correct products, which they just purchased.
FireFox is blocking this information from the secure site to our unsecure site and causing the customers not to receive download information.
FireFox used to work well with our product delivery system but the latest update is causing all kinds of problems. To you have a fix for this inconvenience you browser is causing customers and companies who use a third party processing system?
Best regards,
Steve Yakim

What is the exact error you are receiving? This will help us diagnose the issue in a better way.

Top & bottom print ie: date, web page, in margins are illegible. Content of page is fine.

Have tried changing fonts before printing as well as margins but what prints across the top and bottom is illegible. The page contents is fine. The illegible part is what prints in the top & bottom margins: web page, date, page # etc, This does not happen when printing from Internet Explorer 9. Everything else printed in pdf format from everywhere else comes out fine

In addition, IE doesn't handle margin: 0 auto; on divs very well. So you have to also add "text-align: center" on the body element, which will center align all elements for IE, then "text-align: left;" on the #wrapper. (It will left justify all elements within the centered wrapper.)
Here's a very trimmed example. Notice that I also put a border on the "wrap" div, this can be removed.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
text-align: center;
margin: 0;
#wrap {
border: solid 1px red; /* so that you can see the width */
text-align: left;
margin: 0 auto;
width: 700px;
</style>
</head>
<body>
<div id="wrap">
</div>
</body>
</html>

Bookmarks and web page display question

I have been used to using Netscape and Internet Explorer where you can have a vertical column of bookmarks running up and down on the left side...and then the window to the right will display the web page...i.e., you don't have to click on a separate bookmarks page, open your link, and then toggle back to the Bookmarks page.
I like the idea of having ALL of my many bookmarks available to me on the lefthand side while seeing the pages open in the window to the right.
Is there any way Safari can provide close to that same layout? I know about how to use tabs and I know of the bookmark horizontal bar, but I do miss the vertical on the left bookmarks column showing everything (several hundred) and just clicking and having the web page pop open on the right while keeping all my bookmarks available on the same screen.
Can Safari do this? Or what might be the closest workaround?
Thanks,
John

Sorry for the confusion, here's a more detailed description of what I'm aiming for. Also, I don't have any web pages published or a web host yet so I can't post a URL to my page.
This Adobe forums page acts just like my web page. On the right side of this Adobe page, there is a gray and white checkered design. If the bookmarks (or favorites) are closed (I am using Firefox with a bookmark toolbar on the left side), then the checkered design is pretty wide. If the bookmark toolbar is opened, then part of the checkered pattern is cut off from view, but the left side of the page is still completely in view.
Coca Cola's website is more of how I want my website to be: http://www.coca-cola.com/index.jsp
On both sides of Coca Cola's website, there is a gray-white gradient. If the bookmarks are closed, then the gradient pattern on both sides are exactly equal in width. If the bookmarks are opened, then part of the outside portion the the page is cut off on both the left and right sides quite a bit, but the gradient design widths on the left and right are both still equal in width.
So if the opened bookmarks are going to cut off part of the web page from view, I would prefer to have both parts of the left and right side removed instead of just the right side. I tried centering the page by following David Powers' thread, but either I didn't do it correctly or it didn't help with this problem.
I hope this was clearer.

Configuring active x container to show only part of a web page (net camera)

I've been working on an interface controlling a goniometer for crystal alignment.
A NETcam has been plugged into the network and streams a live image from the equipment being moved by the controls.
I need to integrate the NETcam into the control panel.
I've managed to do this but the actual NETcam has a built in homepage on it with few custom features to ammend a custom page fully.
I am stuck with the streaming image in the middle of a web page from the active x window.
Is there any way I can cut out part of a web page to view only a certain area of it with no scroll bars aswell? The cam is an AXIS2100.
James.

James,
Take a look at the code for the web page. You may find that the camera is itself either another URL, or an image that is part of the page. I haven't worked with this type of data before, but I have worked extensively with web content and HTML, as well as browsers.
You can try several things. If the camera has a URL, use datasocket to link to that. If the image is a separate link, which you can tell by right clicking on the webcam image and clicking "save link as...", then you can setup your browser to look at this image only.
If you can, post the URL for the page you are having problems with, or email me the source for it, and I will try to help.
Good luck

QUESTION: Why is page showing correctly in DW liveview, but gallery black when on web page?

Im new to posting, hope I am asking this question in the correct section to get a response. If I need to ask in a different location please advise.
Question: I added navigation Spry UI 2.0 Basic menu and now my webgallery is not visible, but the simpleviewer logo (my gallery) does appear which tells me its there, any one know Why?
When in my dreamweaver site page and I go to live view it all shows up as its supposed to, but when I go to the web page via safari or firefox everything is there but the portfolio slide show is missing but does show the simpleviewer logo at the bottom.
temporary web page to show is: http://azuredesigninc.com/azure_web_gallery/annual_report_gallery/annual_report_gallery3.h tml
if I should copy and paste all the codeing in my question please let me know. thanks in advance for any help.
Im new to DWcs5 and now have alot of respect for all you web guru's out there. Its a scientific language.... uggggghhhhhh!

You need to ask in the Dreamweaver forum. This is the GoLive to DreamWeaver conversion forum for issues with migration from GoLive to DreamWeaver.

Edit web page with iweb but using a different computer than it was made on?

in short... i made a web page using iweb 09' on my desktop... it is with a domain name that is with godaddy.com... i have it all working... forwarding to my web page etc.... but... how do i edit my web page using my laptop and iweb.... i can't seem to import or load the page into iweb on my laptop? it was created on my desktop and i can modify and change things on it but not my laptop... what am i doing wrong?
thanks in advance...
josh

Will you be working on the site with both computers over time? If so Old Toad's Tutorial #21 - Managing an iWeb site from multiple Macs with Dropbox. can show you a way to make it easy to keep the domain file current on both Macs.
OT

Moving "Back" using short-cut keys

I am running Safari 3.0.2 on both Mac and PC with no probs .. but I do have a "right" hand vs "left" hand suggestion. Currently, to use a short-cut key to move back on page when browsing you must press CNTL [ .. which is great if your "left" handed and use a mouse or glidepad with your left hand and right hand is free .. but, if your use a mouse or glide pad with your right hand you can't use your left hand to go back using a short-cut key .. on Opera browser they use the "z" key to go back one page so you can be mousing with one hand and navigating with the other. So .. it would be nice if the Safari developers made a way to select your custome back page short-cut key ... Thanks.

smitz,
Welcome to Apple Discussions.
Since this is a user-to-user forum your comments will probably not be made available to any Safari development team. I believe that you could use the Safari>"Report Bugs to Apple" selection from the Safari Menu to make that recommendation.
I can go back a page using Safari in my hardware setup by using the "delete" key. I am not sure that will work on your keyboard. You may also have to use the fn key.
;~)

Web page short-cut

new apple user and new to forum. Is there a short cut to go to a new web page. (on a pc, I type in "google," then control-enter, and automatically the www.and .com are added.) With my new mac, I seem to have to type in "www.google.com-enter. Does any short cut exist?

Yes, you can normally just type the "central" part of the URL (eg "cnn") - Safari will autofill "www" and "com" (assuming that's what you want). At the very most, you may need to add the ".com" yourself. I certainly haven't typed "www" in years!
Matt

How do I create a short cut to a web page I am viewing on my MAC in Firefox?

I want to be able to create a short cut (to place on my desktop) to web pages that I use frequently, how can I do this on my Mac using firefox?

See:
* [[Creating a desktop shortcut to a web page]]
* http://kb.mozillazine.org/Creating_a_desktop_shortcut_to_a_webpage
You can also use an extension.
* SaveLink: https://addons.mozilla.org/firefox/addon/14019/
* Deskcut: https://addons.mozilla.org/firefox/addon/66
* Create Shortcut: http://www.pikey.me.uk/mozilla/?addon=cs

Short cut to reach bottom of web page

Similar Messages

Maybe you are looking for