Short cut when loading VST effect during playback with CS6

Hi !
I'm a Audition CS6 user. I love this software, but I have a little problem.
During playback in multitrack session, when I'm loading a VST effect or even an internal Auditon effect, there is, every time at this moment, a short cut of the sound.
It's really boring and I didn't have this trouble with Audition 3.
I have the same problem when I want to group some tracks, at this moment, during playback, the same short cut, or mute.
I don't find any answer in the settings, have you got a solution ?
thank you in advance and Merry Xmas !

I don't think that it is intended that you should add effects or change the grouping whilst playback is on going. Audition has to adjust all the tracks for any delay that might be required to keep all the tracks synchronised. I suspect that it has to reload the audio buffers to take account of this which causes a brief break or mute whilst it does so. So load up any effects that you might use into the Effects Rack before you start playback. You can then switch the effects in and out of circuit hopefully without any breaks since I believe that any effects in the rack are catered for even if not active.

Similar Messages

  • I'm seeing a strobing effect during playback of clips and timeline in FCP7. How do I fix?

    I'm seeing a strobing effect during playback of clips and the timeline in FCP7. Footage isn't corrupt. Apple techs said its not hardware after their tests at the Apple store. I did a full reinstall of FCS. There's 4GB of RAM free at all times during playback. The problem is still there... How do I fix this?
    Strobing:
    By strobing, I mean there's only about 1 ever 10 frames playing back for me. Everything is rendered and the comp settings match the clip settings. It's not constant though, but the strobing is triggered at certain points on the timeline and effect a few clips after that (10 seconds or so at a time), and then when the next clip is displayed on the timeline the strobbing stopps and is reset back to normal playback... until another random clip is encountered by the playback head to which then the process repeats. Also, when strobbing is happening and I move the playhead back a few seconds, or pause & play, or even forward a little on the same strobbing clip (basically when i inturrupt the playback process) the strobbing STOPS! I can watch the same footage that was strobing without it strobing any longer until I move back the playhead far enough and try again, then the strobing is triggered again. I hope this all makes sense, it's very picular and I've seen or heard of nothing like it in my 4 years of editing in FCP7.

    SStrange my enough the problem started occurring a few hours into the project. The only thing I can think of is that I shot with all Canon 5D mark iii footage when I usually shot with a mark ii. My workflow hasn't changed and I have never had this problem. I've also used other mark iii footage in the past without a problem but I don think I've edited entirely with mark iii footage

  • GETWA_NOT_ASSIGNED short dump when load business partner master data

    Hi
    I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
    The error is because the field symbol is that pointed to the line of an internal table that was deleted.
    I think that it's an incompatibility between subroutine and unicode.
    Do you have idea about correct this error?
    Regards
    Jose.

    Hi Ravi
    Yes, it's a dump
    It's when running a process chain to load Business partner master data
    The error say:
    -.You address a field symbol that pointed to the line of an internal table that was deleted.
    -.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
    -. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
    I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
    My hotmail mail is [email protected] if you need the screen shot.
    Regards and thanks a lot
    Jose

  • ABAP short dump when loading data into Infocube

    Hello All,
    I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
    I ran the code to compress the Infocube, no improvement still getting the same error.
    Error Analysis:
    A raise statement in the program "SAPLRSDU_PART" raised in the exception.
    Internal Notes:
    The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
    The internal operation just processed is "FUNE"
    Advance thanks !!!
    Siv

    Hello Siv,
    try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
    SAP notes that might help: 385163, 590370
    Regards,
    Marc
    SAP NetWeaver RIG, US BI

  • IPod Nano 4G Skips During Playback with Apple Lossless Songs

    My iPod Nano 4th Generation has been consistently skipping a brief portion of music about every 5th Apple Lossless song during playback. I've been working unsuccessfully to resolve this issue with tech support and fixed the problem when I disabled the energy level setting in the playback menu. While this is a hit to battery life, the skipping no longer occurs. Hoping that this issue is permanently resolved in an upcoming software update.

    Hi,
    I brought my ipod yesterday and had the exact same issue. it would skip certain songs frequently and was extremely frustrating. Im not sure if this is the case for all ipods (i have an ipod nano 16Gb 4th gen, with firmware 1.0.4), but i fixed my issue in a series of steps. Im not sure which exact part of my method did the job, but here it is:
    1. plugged it into iTunes and clicked "restore" under the tab "summary". WARNING: This will delete everything, and restore factory settings. im not sure if this is necessary, but youll need to delete the songs which skip anyway.
    2. pressed the eject button IN ITUNES (under "devices", and next to your ipod icon), ejecting the ipod. wait for the ipod to specify when it is ready for it to be unplugged. proceed to unplug said ipod.
    3. Choose the language of your ipod, and go into playback settings and (settings/playback or something) and turn OFF "shake" and "energy saver"
    4. Plug your ipod into your computer again and drag all the songs onto your ipod using itunes.
    5. after it has finished copying, WAIT until the ipod no longer says "synching", and until it says "connected"
    6. Press the eject button IN ITUNES (again, under devices, and next to your ipod icon)
    7. Eject when the ipod says it is ok to do so.
    As i said, im not sure which part of the method did it for me, but i think it might be the way in which i was ejecting it. Before i was ejecting the ipod on my desktop. I think it is important to eject it using itunes. Anyway this fixed my ipod. Im not sure if it will do the same to yours, but if its making you very angry (to say the least) like it made me, its worth a try i guess. I would appreciate it if people let me know if this works.

  • Nudging audio during playback with audio plugins applied causes crash

    Hi,
    We are having some unusual crashes at the moment in a very specific situation:
    1. An audio effect is applied to at least one track of audio. Reverb and compression cause it but not EQ.
    2. During playback
    3. Nudging an audio clip using Alt and the left and right arrow keys. One nudge is ok, several quick nudges in succession causes a crash.
    The machine starts beachballing and never seems to stop. Video playback continues.
    This is obviously quite easy to workaround but just wondering if anyone else is having this issue and also wanted to highlight to Adobe.
    Specs:
    Mid 2010 Mac Pro 2 x 2.9GHz 6 Core Xeon
    32GB RAM
    nVidia GTX 680
    240GB SSD boot drive
    2TB internal cache drive
    Adobe Premiere 8.1.0 (81) Build
    OS 10.8.5
    thanks
    Tom

    Same issues with nudging audio on a Mac here too.  Flagged it on here last week but no response.  Guess it's just you and I!     

  • Static during playback with soundfonts

    I'm trying to bring a MIDI file into GarageBand and play it back using various soundfonts. However, when I choose "DLS Music Device" as my tone generator and assign a soundfont, I hear a loud hissing and crackling sound during playback. I only hear this when I'm using a soundfont, not with any of GarageBand's internal sounds.
    I've tried several soundfonts, most of which I've used successfully in other applications, but none of them will play consistently in GarageBand without the hissing.
    Any ideas?
    - Tom M.

    TotallyLee wrote:
    It happens even in a brand new project. I have an empty project apart from 1 track with the mic as an input. No plug ins or anything on it. I've tried the same switching the mic for a guitar with no problem. The guitar sounds perfect while playing and in playback but with the mic I can't hear anything when recording and the volume on the fader is very low so I have to normalise the track to hear the vocals are a good level. I've always done this with no issues but now it seems to be bringing out all these horrible noises. I should add that the vocals themselves are perfectly fine with no distorting, only this strange static sound during gaps in speech. Not sure if that narrows it down at all?
    Ok the fact that the volume is very low is something to correct first, because that's not right. That mic requires either Phantom power or two AA batteries to function, do you have that provided?   The Mic input gain on the Line-6 Pod is where you raise the recording level. 
    It might also help if you posted a screen shot of logic's Audio preferences.

  • Intermittent pauses during Playback with Captivate 6

    I am running Adobe Captivate 6.0.0.199... "Non-Quiz" slides intermittently pause during playback, but, only the animated text... the audio continues. This occurs regardless of a variety of export configurations I have tried. Ideas?

    Hello and welcome,
    Please upgrade ASAP to 6.0.1.240. The version you are using has a lot of bugs, that were fixed with this patch released in October 2012 (not a typo - more than one year ago). Go to Help, Updates.
    Maybe you problem will be solved with that update,
    Lilybiri

  • Short Dump when loading data (Runtime Error ITAB_DUPLICATE_KEY) Urgent Pls

    Dear Guru
    We are loading data into (2 ODS and ! Cube) from one Infopkg.
    When i do delta update it throws following error
    (for one ODS it is green) and for another ODS and CUBE it is red.
    Runtime Error          ITAB_DUPLICATE_KEY                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "GP229LMXTFYDS5X6UC3ND03NIV2" had to be terminated 
    because one of the                                                         
    statements could not be executed.
    Please suggest me some solution, i am with client..its a serious issue now.
    Hope you understand
    Thanks in Adv
    Dev

    hi,
    hope if you retrigger the load it would be successful.
    force the request status to red and delete from the all target and retrigger the load.
    else chk if in the detail tab u could find the data upto PSa. if so delete the red request alone and pull the records to tohose records from PSA.
    Ramesh

  • Player blocks when USB Headset disconnected during playback

    I am playing a Wav file in my application & using a USB Headset to listen to the playback.
    I'm observing the following behavior while doing this:
    Scenario-USB headset is connected when the application starts up.
    a) Am able to hear the voice on the USB headset when I play the wav file. Also, I get the visual Control Panel component for the player and add it to my application UI.
    Code Segment 1:
    //create player
    //start playback
    //player.start();
    Code Segment 2:
    //In controllerUpdate(ControllerEvent ce)
    //for RealizeCompleteEvent
    if (event instanceof RealizeCompleteEvent) {
    //get the Control Panel Component for player
    Component comp = player.getControlPanelComponent()
    //add the component to the UI
    b) javax.media.StartEvent is fired when the playback begins.
    c) I then disconnect the USB Headset while playback is in progress. The saddle on the Control Panel Component slider bar pauses at it's position as soon as the headset is disconnected. Also, when this happens, no event is fired.
    d) At this stage, if I try to stop the player using a Stop button on my UI, my application hangs. The stop() method called on pressing the Stop button has the following code:
    Code Segment 3:
    //in stop()
    //stop player, close it & deallocate resources
    player.stop();
    player.close();
    player.deallocate();
    In the above steps, no exception is ever thrown nor any event fired signalling the disconnection of the device in use(headset).
    I need to detect the disconnection of my USB headset & prevent the player from blocking, so that I can stop the player & release the resources in a clean way.
    Any suggestions in this regard would be appreciated.
    Thanks!
    ~thebadgrover

    Hi, did you resolve your problem? I have similar problem to detect when a capture device is disconnected.

  • Short Dump when loading Data into Cube UNCAUGHT_EXCEPTION(Pls Help)

    Dear Guru's
    i am trying to load data into a Cube from a ODS and the load gets dump...
    In Dump Analysis.....
    The exception 'ZCX_EDW_MAP_ROOT' was raised, but it was not caught anywhere         
    along   
    "UNCAUGHT_EXCEPTION" "ZCX_EDW_MAP_ROOT"                                       
    "ZCL_EDW_MAP_ROOT==============CP" or "ZCL_EDW_MAP_ROOT==============CM002"   
    "LOAD_MAPPING_INFOPROV"                                                                               
    So it would be great if some one can give me some suggestion to handle this issue
    Thanks in Adv
    Dev

    Dear Arun,
    i have checked the routine there exists some code
    Eg: data: vref_monitor type ref to zcl_edw_monitor,
    But to say fact i ddnot i understood it....
    Any suggestions dude...pls
    thanks in adv
    Dev

  • Speedgrade frame rate issue when loading reels. EDL from Premiere CS6

    We have a short film, cut in Premiere (time base in sequence is set to 23.976 and display format is set at 24fps) I imported the EDL into Speedgrade for coloring. My Speedgrade edit settings have a base frame rate of 24fps and the option "both edits have current base frame rate as set above or within the EDL itself" is selected. However when I go to load reels from desktop I am getting an error that says "some of the reels do not match your current frame rate." In turn this is causing our exported Quicktime (TIFF uncompressed at 24fps) to not sync up with our audio back in premiere. It looks as if we are missing frames.
    Is this an EDL issue with Premiere? Or is it a Speedgrade frame rate settings issue? Any feedback is greatly appreciated!
    Some details on the project:
    Shot at 4K on Red Scarlet, at 24fps.  Edited in Premiere CS6.
    Premiere Settings:
    Editing Mode: Custom
    Timebase: 23.976 frames/second
    Display Format: 24fps Timecode
    Speedgrade Settings:
    Timeline FPS: 24fps

    aaronfronk wrote:
    Shot at 4K on Red Scarlet, at 24fps.  Edited in Premiere CS6.
    Premiere Settings:
    Editing Mode: Custom
    Timebase: 23.976 frames/second
    Display Format: 24fps Timecode
    Speedgrade Settings:
    Timeline FPS: 24fps
    I don't have had problems if the frame ratio is the same in all process, and in this case it isn't. If the Scarlet footage is to 24 fps, why to use 23.976 in Premiere?

  • Sounds stops many times during playback with popping noises

    During start or playback of a song, Logic makes many times a popping sound after which the sounds is gone although the song keeps on playing. This also happens when I play on my keyboard while using software instruments. A short moment I hear the software instrument, then a popping sounds and no sound any longer although the midi meter shows that I am playing. What is wrong here?

    I have the same problem everyone here is describing.
    I bought a Jabra Extreme a few months ago (it supports A2DP) and I found that the audio keeps skipping on my iPhone 4. It skips every 5 seconds or so which rendered listening to music via bluetooth impossible. I figured it was a "compatibility issue" with the Jabra and abandoned its use for music.
    A couple of weeks ago, I decided to spring for a pair of JayBird bluetooth headphones. I figured this will help. Regretfully, the problem was back. This points the fault squarely at the iPhone.
    I have not tried turning the airplane mode on and off and will definitely give that a try. But I seriously don't think that should be the way a device capable of bluetooth audio streaming should work!
    Does anyone from Apple read these discussion threads? Will there be a fix?
    Maybe I should stop holding my breath.

  • Video Freezing During Playback with X1

    For the past 16 to 24 hours or so, I tried to watch several different shows on my TV using the OnDemand menu on my X1 box, the TV Remote app on my iPad or via the xfinitytv.comcast.net website, and the shows keep freezing within the first 10 minutes of play, and then one or more times during the remainder of the program.  These freezes last from 5 minutes to over 20 minutes ( I am currently expereinceing one right now during the playback of Masters of Sex).  I have paused, exited and returned, rebooted, unplygged etc. Coincidentally, this entire week I have been experiencing intermittent internet outages as well.  Not sure if they are related, but it is very frustrating when I am on a conference call or webex, and my phone and desktop drops from the meeting, especially when I am the host! I have not had this issue before, and am thinking this is a capacity issues, since its is a holiday weekend and many folks are trying to do playback, and its just not enough bandwith? I did not have this issue before when I was not on the X1 platform.   Please advise, as there are no reported outages in my area.

    thejazzdiva wrote:
    For the past 16 to 24 hours or so, I tried to watch several different shows on my TV using the OnDemand menu on my X1 box, the TV Remote app on my iPad or via the xfinitytv.comcast.net website, and the shows keep freezing within the first 10 minutes of play, and then one or more times during the remainder of the program.  These freezes last from 5 minutes to over 20 minutes ( I am currently expereinceing one right now during the playback of Masters of Sex).  I have paused, exited and returned, rebooted, unplygged etc.
    Coincidentally, this entire week I have been experiencing intermittent internet outages as well.  Not sure if they are related, but it is very frustrating when I am on a conference call or webex, and my phone and desktop drops from the meeting, especially when I am the host!
    I have not had this issue before, and am thinking this is a capacity issues, since its is a holiday weekend and many folks are trying to do playback, and its just not enough bandwith?
    I did not have this issue before when I was not on the X1 platform.  
    Please advise, as there are no reported outages in my area.
    After reviewing your account I was able to see that currently there is an area issue reported for you. From the information it should be resolve by tomorrow morning. If you continue to have issues beyond this, let us know. We might need to check a few extra things to identity the problem. -FC 

  • Problem when load more swf files work with xml files into my movie

    hi ;
    I have one flash file & more of swf files which work with xml files .
    when I load one swf file into my flash file  and remove it and load anther one on the same movieclip in my flash file it load the old swf file.
    when i load one on movieclip and remove it and load anther swf  on anther movieclip the file doesn`t work  and stoped.
    when test my flash file to load and remove swf files without xml file it work fine but when repleaced the swf files with other work with xml files the problem hapend.
    thanks;

    YOu should trace the names of the files that are being targeted for loading to see if they agree with what you expect.  If you want help with the coding you will need to show the code that is relevant to your problem (not all of it)

Maybe you are looking for