Short dump due termination in the program SAPLSNR3

Hi Experts,
While running an IP I am getting short dump, and error analysis says
An ASSIGN statement in the program "SAPLSNR3" contained a field symbol with
length 0. This is not possible. length 0.This is not possible.
can any one exlain why the IP is going for short dump,rectify the error and make the IP to run sucessful.
Regards,
Siddhardh

Hi Suresh,
Your dump is occuring due to database limit of sql statment (Native SQL) that is generated from your abap sql. The range is killing him (as you already notice).
The thread bellow have some info about this, but the solution can't be applyed to you:
To update 1 field of ztable(60 fields) for 2000 records in minimum DB hit
Maybe you can build some logic to reduce the value of two ranges (also concatenating them). Anyway, due to amount of lines involved (24.500 lines).... I don't think it is possible.
One option is filter the result on ABAP, after your SQL w/o the ranges you may try:
DELETE FROM TABLE i_glpct2
WHERE NOT ( racct IN r_profloss OR racct IN r_balsheet ).
This can raise a performance problem if the number of returned rows from database is to high.
Another option is change your database access. Where the values of the two ranges came from ? database ? If they came from database try to use INNER JOIN, this will solve the problem w/o performance problem.
Best Regards, Fernando Da Ró

Similar Messages

Getting Short dump due to large amount of data

Hi experts,
When we are running RALM_ME_MEASP_FULL_DOWNLOAD_SD program, every time we are getting Short dump due to large amount of data.
please suggest how to run this program without short dump.
Thanks & Regards
Prashant Gupta

Hi,
you do run the wrong APP I guess. The service you are running is for MAM20. If you are interested in MAM30 and MAM25, please use the correct service.
If you have a look for
*FULL_DOWNLOAD_SD
You find them all. Use the ones without the RALM in front - then the timeout should be solved as well. Bside that there is a great guid available that helps as well to solve some issues around server driven replication:
[MAM SERVER DRIVEN SETUP GUIDE|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/818ac119-0b01-0010-ba8b-b6e3f3490a63?quicklink=index&overridelayout=true]
Hope that helps to solve yourt issue.
Regards,
Oliver

Short Dump Error in deleting the Init request

Hi Gurus,
i am loading master data from sap r3 by init update.
now due to some requirement i have to delete the init request , but when i try to delete the request
it goes to short dump and gives the error message as
Runtime Errors         MESSAGE_TYPE_X
Date and Time          01/05/2009 01:54:15
Short text
     The current application triggered a termination with a short du
What happened?
     The current application program detected a situation which real
     should not occur. Therefore, a termination with a short dump wa
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Error when opening an RFC connection
     Long text of error message:
     Technical information about the message:
     Message class....... "RSAR"
     Number.............. 051
     Variable 1.......... "Error when opening an RFC connection"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
     Last error logged in SAP kernel
     Component............ "SAP-Gateway"
     Place................ "SAP-Gateway on host sapdev / sapgw00"
     Version.............. 2
     Error code........... 631
     Error text........... "max no of gateways exceeded (100)"
     Description.......... " "
     System call.......... " "
     Module............... "gwxxrd.c"
     Line................. 8438
     The error reported by the operating system is:
     Error number..... " "
     Error text....... " "
Trigger Location of Runtime Error
    Program                                 SAPLRSSM
    Include                                 LRSSMF03
    Row                                     1,627
    Module type                             (FORM)
    Module Name                             DEL_SOURCE_SYSTEM_INIT
1624           communication_failure = 1 message l_msg_text
1625           system_failure        = 2 message l_msg_text.
1626       if sy-subrc <> 0.
>>>>>         message x051(rsar) with l_msg_text(50) l_msg_text+50(50) '' ''.
1628       endif.
Please help me on this as untill it will not be deleted, I will be unable to load the data.
suitable answer will get Full points.
Thanks.

Hi Saurabh,
PLEase go through these notes:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383837393039%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383934313030%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393738303738%7d

Short dump due to performance issue

Hi all,
I am facing performance issue in my sandbox. Below is the content of short dump.
Short text
    Unable to fulfil request for 805418 bytes of memory space.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
What can you do?
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
           Amount of memory per user in extended memory (EM)
    o abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
Pls help me to resolve this issue
Regards,
Kalyani
Edited by: kalyani usa on Jan 9, 2008 9:04 PM

Hi Rob Burbank,
I am pasting the transaction I found in the dump
Transaction......... "SESSION_MANAGER "
Transactions ID..... "4783E5B027A73C1EE10000000A200A17"
Program............. "SAPMSYST"
Screen.............. "SAPMSYST 0500"
Screen line......... 16
Also i am pasting the screenshot of ST02
Nametab (NTAB)                                                                                0
Table definition     99,22     6.799      3.591      62,97    20.000     12.591      62,96       0    8.761
Field definition     99,06    31.563        345       1,15    20.000     13.305      66,53     244    7.420
Short NTAB           99,22     3.625      2.590      86,33     5.000      3.586      71,72       0    1.414
Initial records      52,50     6.625      3.408      56,80     5.000        249       4,98     817    5.568
                                                                                0
program                99,58   300.000      1.212       0,42    75.000     67.561      90,08   7.939   46.575
CUA                    99,08     3.000        211       8,84     1.500      1.375      91,67 23.050      846
Screen                 99,46     4.297      1.842      45,00     2.000      1.816      90,80      81      963
Calendar              100,00       488        401      85,14       200        111      55,50       0       89
OTR                   100,00     4.096      3.281     100,00     2.000      2.000     100,00       0
                                                                                0
Tables                                                                                0
Generic Key          99,69    29.297      2.739       9,87     5.000        177       3,54      57   56.694
Single record        89,24    10.000         63       0,64       500        468      93,60     241 227.134
                                                                                0
Export/import          76,46    50.000     40.980      83,32     2.000                         2.676
Exp./ Imp. SHM         97,82     4.096      3.094      94,27     2.000      1.999      99,95       0
SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area            0,16        432     18.672    131.072    131.072   IDs           98,11
Page area            0,19        496    187.616     65.536    196.608   Statement     95,00
Extended memory      9,89    151.552 1.531.904 1.531.904          0                  0,00
Heap memory                        0          0 1.953.045          0
0,00
Regards,
Kalyani

Short dump due to Memory Space

Hi Experts,
I have an internal table whose width is 3576 characters. My selection criteria is selecting approximately 1 million record from the database table.
Out of the 3576 characters, I m not even filling 150 characters a row using selection fields.
The short dump is as follows:
Error analysis
    The internal table "\PROGRAM=ZPMWO_DSR_RECONCILIATION\FORM=RECONCILIATION\DATA=
    LT_VIQMEL_I" could not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 3576
    Number of rows: 1035860
    Allocated rows: 1035860
    Newly requested rows: 4 (in 1 blocks)
How to correct this?? I mean how do i increase the memory space required for this process??

Hi,
Check there is not an endless loop which is appending data in the internal table.
Regards,
Ankur Parab

Short Dump while activating Transformation through Program

HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
Prasad

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

Short dump due to conversion error on screen

Hello all,
I have designed one screen, and throwing error message if perticular filed is blank as (message e002(z2)). If i keep the filed blank system is throwing error message but giving short dump because of 'Conversion error' .
Error analysis : 'The program has been interrupted and cannot resume. |
Program "SAPMZTIMECOLLECT_NEW" attempted to display fields on screen 0101.
| An error occurred during the conversion of this data. '
Please, could you help to understand why system is giving short dump.
Thanks in advance..!!

Solved for me.
If we don't have value for the field which we are passing it to tablecontrol, then declare the variable with the same type and assigned space for the same and submit it to table control output. then the error is not coming.
Ex: If we dont have the value for the table control field (KOSTL), then declare one constant K_KOSTL LIK below,
DATA:K_KOSTL TYPE KOSTL.
K_KOSTL = ' '.
IF the value of table control field is initial, then pass K_KOSTL to it.
This what I have done.
Regards
Ramesh.

Short Dump due to TIME_OUT Error

Hi,
We have a situation here, where the monthly data from R/3 is extracted to ODS (Full upload) and subsequently getting uploaded to infocube (Delta). Usually the ODS to infocube updation takes long hours of time (say 8 hours), because of complexity of the update rules over the cube and this was working fine for the past months.
But on 1st of this month when I extracted R/3 data went fine upto ODS, but failed in the further process (i.e., ODS to Infocube) resulting in a short dump. Extract is shown below
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
So I want to try out with another option, Since we know the data coming to ODS on a monthly basis, instead of pushing the data to infocube in delta mode, can I upload the data using full update (but of course weekly wise) to cube ?.
What will be the complications?.
Please guide with your ideas
Thanks in advance,
Arun.

System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Did you follow this recommendation? Did you check the short dump?
If it is really a time_out issue, the short dump will tell you so, but there can also be other causes for caller 70 missing.
It is a time_out you can either increase your time out setting, or decrease the package size in your infopackages;
kr,
Tom

Short Dump while scrolling on the ALV (GETWA_NOT_ASSIGNED)

Hi All,
I have an interactive ALV list, After the user double click on the list line item,
the list control goes to top of the list.
When i want to scroll for further interaction, I am getting a Short dump GETWA_NOT_ASSIGNED.
Please advice
Solomon

Hi
Please find the ALV code
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = hf_repid
      i_callback_user_command = 'USER_COMMAND'
      i_callback_pf_status_set = 'SET_PF_STATUS'
      it_fieldcat              = int_fieldcat[]
      it_sort                  = int_sort[]
      is_layout                = fs_layout
      i_save                   = 'A'
      is_variant               = alv_variant
      it_events                = int_events[]
    TABLES
      t_outtab                 = i_bsid
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
ENDFORM.                               " write_alv_report
FORM user_command *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
IF selfield-tabindex GE 1.
    check sy-ucomm <> 'POST'.
    READ TABLE i_bsid into i_bsid_alv INDEX selfield-tabindex.
    CASE I_BSID-CHECK.
      WHEN SPACE.
        I_BSID-CHECK = 'X'.
      WHEN OTHERS.
        I_BSID-CHECK = ''.
    ENDCASE.
    MODIFY I_BSID TRANSPORTING CHECK WHERE matchkey = i_bsid_alv-matchkey.
ENDIF.
selfield-refresh = 'X'.
*CLEAR selfield.
ENDFORM.                    "user_command
FORM SET_PF_STATUS *
FORM set_pf_status USING extab TYPE slis_t_extab.
data : lv_answer(1) TYPE c.
SET PF-STATUS 'S200'.
IF SY-UCOMM = 'POST'.
    I_BSID_ALV1[] = I_BSID[].
    DELETE I_BSID_ALV1 WHERE CHECK = SPACE.
    CLEAR I_BSID[].
    I_BSID[] = I_BSID_ALV1[].
ENDIF.
2. when I double click on the ALV list line item, after the line is selected the control goes to the top of the list.
I have already setup the ALV menu bar.

Short Dump Error while executing the DTP

Hello Experts,
I am facing an issue with DTP.
Data has been loaded to PSA successfully but while executing the DTP for loading from PSA to DSO (WO) throwing a short dump RAISE_EXCEPTION.
Short text
Exception condition "NO_DS_LG_FOUND" raised.
"RAISE_EXCEPTION" " "
"SAPLRSSTATMAN" or "LRSSTATMANU1
"RSSTATMAN_GET_PARTTAB_PSA"
or
"SAPLRSSTATMAN" "NO_DS_LG_FOUND"
or
"RSAWBN_START " "NO_DS_LG_FOUND"
We are on BI support pack 14 SAPKW70014, searched for OSS notes but there are few for SP 12/ 13.
Did any body faced the simlliar issues,,,, please help
Appreicate your quick response.

You may wish to check this
Note 1083305 - P16:STATMAN:Dump in function module RSM_INFOCUBE_WRITE_CHECK
Hope it Helps
Chetan
@CP..

SHORT DUMP due to STORAGE_PARAMETERS_WRONG_SET in ALV

Hello All,
There is an internal table containing more than 200,000 thousand records.
when this is passed to ALV grid for display, the program terminates with the exception STORAGE_PARAMETERS_WRONG_SET
I was wondering if there is a way to prevent the program from terminating.
Are there any system settings that can be changed/checked?
(Its an Unix OS).
Any help is welcome.
Many thanks!
Vinay

This is what SAP documentation says:
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum value. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.
When the program was running, it was established that more
memory was needed than the operating system is able to provide savely
To avoid a system crash, you must prevent this
situation.
The program had already requested &P1 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.

Commit on abnormal termination of the program

I just want to know if Oracle provides options at Connection Time, that it would commit on abnormal program termination.
If yes, I want to use this feature in my Pro*C application, where I can commit after inserting every 1000 records only.
So, even though the application has gone down after inserting partial number of records, when the application dies, Oracle would take care of doing a COMMIT.
Please let me know if Oracle supports such feature.
Thanks
RajaGopal Maddi

If Pro*C or other Pro* languages support an SQLPlus autocommit feature which I do not think they do the question would be how do you know which rows were committed and which were rolled back and have to be re-processed. This would not be difficult via error handling when you control the commit/rollback processing but I suspect it would be a challenge if a feature did this for you.
As far as I know autocommit is an SQLPlus option. I know there is an OCI autocommit feature but it is related to DDL.
Pro*C provides an interface record to be able to determine if an error occurred and information about the error.
This is a trivial task.
-- Mark D Powell --

Operapluginwrapper dumps core every time the program is run?

Before I report this as a bug, I am wondering if anyone else sees the same behaviour. Every time I run Opera, whether or not I actually visit a website or do anything else at all, I get a systemd coredump into memory of about 26MB. Does anyone else experience this please?

xpander - thanks for responding. I might be wrong, but I don't think it is flash in my case. I have another box with very different hardware but the same version of Arch / Opera etc. It did not have the flashplugin, which I have just installed but which does not cause the coredump. I also tried restricting the plugin path on the affected box to /usr/lib/opera/plugins and symlinked the mozilla plugins to there - omitting flash. It did not cure the problem. As I said though, I am no expert and can still be wrong. I have posted a question in the Opera linux forums, but no response there yet. I will disable coredumps as you suggest though - thanks for the link.

Short dump during activating the BC Set in SCPR20 - "GETWA_NOT_ASSIGNED"

Hi experts,
We have upgraded from SRM 4 to 7.0.We are facing an issue when activating the BC Set in SCPR20. A short dump is occuring inside the program 'VIRSA/SAPLZVIR'. We got the solution that some correction instructions mentioned in the SAP Note 1095700 needs to be mplemented. The steps mentioned in the Note are,
1) Run transaction SE54 and click the button 'Edit Function Group'.
2) Next, enter the name of the function group /VIRSA/ZVR1.
3) Select the radio button option 'Re-generate group-specific programs',and press the 'Change' button.
4) In the following popup please mark only the option 'structure spec.data declaration renewal' and press enter.
We were able to proceed with the first two steps but stuck up during the execution of step3. When we selected the radio button u2018Re-generate group-specific programsu2019 and when clicked on the change button, we are getting a message like u2018the name space u2018/VIRSA/ZVR1u2019 does not exists. Because of this we are not able to proceed with the last step.
Kindly provide some ponters as of how to overcome this issue ..
Thanks in advance,
Dhan

Hi there,
To overcome this error you need to go to se06 and make the "/VIRSA/" namespace as Modifiable.
Also, you should have a look at the following note if my first suggestion doesn't work.
1041089 Tx SCPR20: GETWA_NOT_ASSIGNED dump during BC Set activation
Hope this helps.
Kind Regards,
Matthew

Short dump suggest me the solution

hi friends,
i am geeting the short dump when i execute the program
because here i am taking the ranges some times the ranges is very high in that time only i am getting the short dump
please suggest me any alter native
i am sending the samll code
Ranges;r_vbeln for vbap-vbeln,
            r_posnr for vbap-posnr.
if not ( it_vbap[] is initial).
select matnr werks strgr
from marc into table it_marc
for all entries in it_vbap
where matnr = it_vbap-matnr
and erks = it_vbap-werks.
select vbeln posnr vbelv posnv
from vbfa
inti corresponding field of table it_cont
for all entries in it-vbap
where vbeln eq it_vbap-vbeln
and posnn eq it_it_vbap-posnr
and vbtyp_v eq 'g'.
r_vbeln = r_posnr = 'IEQ'.
LOOP AT IT_CONT.
r_vbeln-low = it_cont-vbelv. collect r_vbeln.
r_posnt-low = it_cont-posnv. collect r_posnr.
endloop.
LOOP AT IT_vbap.
r_vbeln-low = it_vbap-vbelv. collect r_vbeln.
r_posnt-low = it_vbap-posnv. collect r_posnr.
endloop.
the below select statement time only i am geeting the short dump
select matnr werks lgort charg kalab vbeln posnr sobkz
     from mska
    into table it_mska
for all entries in it_vbap
where matnr = it_vbap-matnr
and werks = it_vbap-werks
and sobkz = 'e'
and vbeln IN r_vbeln
and Posnr in r_posnr.
i need the same output please suggest me the solution to write above select statement is ther any other way
Regards
srinu

Hi,
It is better not to use a range directly in the where condition. This is because when the range values are more it will give a dump. To avoid this, inside the program we need to build a logic to select records in a batch from the range.
For example,
a) if the range has say 10,000 records,
b) first take 1000 records from the range and then put it in an internal table and use this internal table for selecting records from the database (for eg MSKA).
c) Append the first 1000 records the database table into an itab.
d) Then take the next 1000 records from the range and select the data from database table and so on.
e) Repeat this process untill all the records in the ranges are finished.
This will definitely avoid a dump.
Please reward useful answers.
Regards
Vimal

Short dump due termination in the program SAPLSNR3

Similar Messages

Maybe you are looking for