Short Dump due to TIME_OUT Error

Hi,
We have a situation here, where the monthly data from R/3 is extracted to ODS (Full upload) and subsequently getting uploaded to infocube (Delta). Usually the ODS to infocube updation takes long hours of time (say 8 hours), because of complexity of the update rules over the cube and this was working fine for the past months.
But on 1st of this month when I extracted R/3 data went fine upto ODS, but failed in the further process (i.e., ODS to Infocube) resulting in a short dump. Extract is shown below
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
So I want to try out with another option, Since we know the data coming to ODS on a monthly basis, instead of pushing the data to infocube in delta mode, can I upload the data using full update (but of course weekly wise) to cube ?.
What will be the complications?.
Please guide with your ideas
Thanks in advance,
Arun.

System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Did you follow this recommendation? Did you check the short dump?
If it is really a time_out issue, the short dump will tell you so, but there can also be other causes for caller 70 missing.
It is a time_out you can either increase your time out setting, or decrease the package size in your infopackages;
kr,
Tom

Similar Messages

Short dump due to conversion error on screen

Hello all,
I have designed one screen, and throwing error message if perticular filed is blank as (message e002(z2)). If i keep the filed blank system is throwing error message but giving short dump because of 'Conversion error' .
Error analysis : 'The program has been interrupted and cannot resume. |
Program "SAPMZTIMECOLLECT_NEW" attempted to display fields on screen 0101.
| An error occurred during the conversion of this data. '
Please, could you help to understand why system is giving short dump.
Thanks in advance..!!

Solved for me.
If we don't have value for the field which we are passing it to tablecontrol, then declare the variable with the same type and assigned space for the same and submit it to table control output. then the error is not coming.
Ex: If we dont have the value for the table control field (KOSTL), then declare one constant K_KOSTL LIK below,
DATA:K_KOSTL TYPE KOSTL.
K_KOSTL = ' '.
IF the value of table control field is initial, then pass K_KOSTL to it.
This what I have done.
Regards
Ramesh.

Getting Short dump due to large amount of data

Hi experts,
When we are running RALM_ME_MEASP_FULL_DOWNLOAD_SD program, every time we are getting Short dump due to large amount of data.
please suggest how to run this program without short dump.
Thanks & Regards
Prashant Gupta

Hi,
you do run the wrong APP I guess. The service you are running is for MAM20. If you are interested in MAM30 and MAM25, please use the correct service.
If you have a look for
*FULL_DOWNLOAD_SD
You find them all. Use the ones without the RALM in front - then the timeout should be solved as well. Bside that there is a great guid available that helps as well to solve some issues around server driven replication:
[MAM SERVER DRIVEN SETUP GUIDE|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/818ac119-0b01-0010-ba8b-b6e3f3490a63?quicklink=index&overridelayout=true]
Hope that helps to solve yourt issue.
Regards,
Oliver

AD4J: Unable to start Heap Dump due to OS Error

When Java 'Heap Dump' is requested, the following message is shown:
Unable to start Heap Dump due to OS Error.
Details of the monitored JDK and application server are given below:
JDK: Sun JDK 1.4.2_08 on Solaris 9
Application Server: WebLogic 8.1 SP4
1. What could be the possible cause? No errors are logged in jamserv/logs/error_log. Is there any way to enable detailed logging?
2. Each time the heap dump is requested, a file of the format heapdump<n> gets created in /tmp (e.g. /tmp/heapdump12.txt). If you see the file, it contains the following:
a) a line containing summary of the heap usage, and
b) stack traces of all the threads
Thanks!

Wrong Forum?

Short dump due to Memory Space

Hi Experts,
I have an internal table whose width is 3576 characters. My selection criteria is selecting approximately 1 million record from the database table.
Out of the 3576 characters, I m not even filling 150 characters a row using selection fields.
The short dump is as follows:
Error analysis
    The internal table "\PROGRAM=ZPMWO_DSR_RECONCILIATION\FORM=RECONCILIATION\DATA=
    LT_VIQMEL_I" could not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 3576
    Number of rows: 1035860
    Allocated rows: 1035860
    Newly requested rows: 4 (in 1 blocks)
How to correct this?? I mean how do i increase the memory space required for this process??

Hi,
Check there is not an endless loop which is appending data in the internal table.
Regards,
Ankur Parab

Short dump due termination in the program SAPLSNR3

Hi Experts,
While running an IP I am getting short dump, and error analysis says
An ASSIGN statement in the program "SAPLSNR3" contained a field symbol with
length 0. This is not possible. length 0.This is not possible.
can any one exlain why the IP is going for short dump,rectify the error and make the IP to run sucessful.
Regards,
Siddhardh

Hi Suresh,
Your dump is occuring due to database limit of sql statment (Native SQL) that is generated from your abap sql. The range is killing him (as you already notice).
The thread bellow have some info about this, but the solution can't be applyed to you:
To update 1 field of ztable(60 fields) for 2000 records in minimum DB hit
Maybe you can build some logic to reduce the value of two ranges (also concatenating them). Anyway, due to amount of lines involved (24.500 lines).... I don't think it is possible.
One option is filter the result on ABAP, after your SQL w/o the ranges you may try:
DELETE FROM TABLE i_glpct2
WHERE NOT ( racct IN r_profloss OR racct IN r_balsheet ).
This can raise a performance problem if the number of returned rows from database is to high.
Another option is change your database access. Where the values of the two ranges came from ? database ? If they came from database try to use INNER JOIN, this will solve the problem w/o performance problem.
Best Regards, Fernando Da Ró

Short dump in VF01 - Syntax error in program "RKEAK9RECP3000001"

Helo all,
We recently copied our production client to a QA client and when we try to save an SD invoice (VF01), we get a short dump titled - Syntax error in program "RKEAK9RECP3000001".
The dump long text states:
"The Dictionary structure or table "K9RECP3000001" is either not active"
" or does not exist."
and
NOTE in case of a SHORT DUMP:
if the following perform statement should lead to a short dump, then
the report stated in the short dump is missing (RKEAK9Rsssmmmnnnn)
Check if table K9Rsssmmmnnn exists. If not it should be transported
from the original system.
Regenerate the missing reports by using transaction SE37, entering
function KEDR_REGENERATE_ALL_REPORTS and pressing button 'Test' and
'Execute'.
but I tried to run function KEDR_REGENERATE_ALL_REPORTS in SE37 and the problem persists.
Maybe I'm not running it correctly - there is no execute option when pressing "Test" so I enter the function and press F8, which takes me to a screen titled "Test function module" and then I execute.
My suspicion is that table "K9RECP3000001" cannot be created or generated since it it a system specific naming convention K9RSSSCCC0001 in which SSS is system ID (in our case ECP is production and ECQ is QA) ans CCC is client number (300 in prod, and should be 286 in ECQ).
Has anyone encountered this type of a problem and knows how to fix it?
Needless to say, I looked at OSS notes, but did not find the solution there.
Any thought will be appreciated,
Yoel.

Shalom Yoel,
This problem may be caused by the fact that some derivation rules
that were originally created once in a system have been transported
into target system without transporting the dependent objects
as well (the generated tables for the derivation rule entries).
You can see this by execution of program RKEDRCHECK with only
parameter 'Check in all clients' marked. You will then get
inconsistent derivation steps (which refer to a generated table
table for the rule entries that doesn't exist because it was
not transported).
There are two ways to solve the problem:
1.) If you don't need these steps any more in derivation you can get
    rid of them by executing program RKEDRCHECK with both parameters
    marked ('Check in all clients' and 'Delete inconsistent steps').
2.) If these steps should remain you have to retransport the missing
    tables from the source system in which these tables have to exist
    (creating transport requests for the customizing of derivation by
    pushing on the 'Transport' icon in the source system in transactions
    KEDR and KEPC).
For each derivation step,the system generates a program RKEAK9R *
and a table K9R+ System ID+ Mandant+ a number of five figures
from the object number in KEDR.
br, Guido

Short dump due to performance issue

Hi all,
I am facing performance issue in my sandbox. Below is the content of short dump.
Short text
    Unable to fulfil request for 805418 bytes of memory space.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
What can you do?
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
           Amount of memory per user in extended memory (EM)
    o abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
Pls help me to resolve this issue
Regards,
Kalyani
Edited by: kalyani usa on Jan 9, 2008 9:04 PM

Hi Rob Burbank,
I am pasting the transaction I found in the dump
Transaction......... "SESSION_MANAGER "
Transactions ID..... "4783E5B027A73C1EE10000000A200A17"
Program............. "SAPMSYST"
Screen.............. "SAPMSYST 0500"
Screen line......... 16
Also i am pasting the screenshot of ST02
Nametab (NTAB)                                                                                0
Table definition     99,22     6.799      3.591      62,97    20.000     12.591      62,96       0    8.761
Field definition     99,06    31.563        345       1,15    20.000     13.305      66,53     244    7.420
Short NTAB           99,22     3.625      2.590      86,33     5.000      3.586      71,72       0    1.414
Initial records      52,50     6.625      3.408      56,80     5.000        249       4,98     817    5.568
                                                                                0
program                99,58   300.000      1.212       0,42    75.000     67.561      90,08   7.939   46.575
CUA                    99,08     3.000        211       8,84     1.500      1.375      91,67 23.050      846
Screen                 99,46     4.297      1.842      45,00     2.000      1.816      90,80      81      963
Calendar              100,00       488        401      85,14       200        111      55,50       0       89
OTR                   100,00     4.096      3.281     100,00     2.000      2.000     100,00       0
                                                                                0
Tables                                                                                0
Generic Key          99,69    29.297      2.739       9,87     5.000        177       3,54      57   56.694
Single record        89,24    10.000         63       0,64       500        468      93,60     241 227.134
                                                                                0
Export/import          76,46    50.000     40.980      83,32     2.000                         2.676
Exp./ Imp. SHM         97,82     4.096      3.094      94,27     2.000      1.999      99,95       0
SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area            0,16        432     18.672    131.072    131.072   IDs           98,11
Page area            0,19        496    187.616     65.536    196.608   Statement     95,00
Extended memory      9,89    151.552 1.531.904 1.531.904          0                  0,00
Heap memory                        0          0 1.953.045          0
0,00
Regards,
Kalyani

SHORT DUMP due to STORAGE_PARAMETERS_WRONG_SET in ALV

Hello All,
There is an internal table containing more than 200,000 thousand records.
when this is passed to ALV grid for display, the program terminates with the exception STORAGE_PARAMETERS_WRONG_SET
I was wondering if there is a way to prevent the program from terminating.
Are there any system settings that can be changed/checked?
(Its an Unix OS).
Any help is welcome.
Many thanks!
Vinay

This is what SAP documentation says:
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum value. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.
When the program was running, it was established that more
memory was needed than the operating system is able to provide savely
To avoid a system crash, you must prevent this
situation.
The program had already requested &P1 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.

Short Dump Error in deleting the Init request

Hi Gurus,
i am loading master data from sap r3 by init update.
now due to some requirement i have to delete the init request , but when i try to delete the request
it goes to short dump and gives the error message as
Runtime Errors         MESSAGE_TYPE_X
Date and Time          01/05/2009 01:54:15
Short text
     The current application triggered a termination with a short du
What happened?
     The current application program detected a situation which real
     should not occur. Therefore, a termination with a short dump wa
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Error when opening an RFC connection
     Long text of error message:
     Technical information about the message:
     Message class....... "RSAR"
     Number.............. 051
     Variable 1.......... "Error when opening an RFC connection"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
     Last error logged in SAP kernel
     Component............ "SAP-Gateway"
     Place................ "SAP-Gateway on host sapdev / sapgw00"
     Version.............. 2
     Error code........... 631
     Error text........... "max no of gateways exceeded (100)"
     Description.......... " "
     System call.......... " "
     Module............... "gwxxrd.c"
     Line................. 8438
     The error reported by the operating system is:
     Error number..... " "
     Error text....... " "
Trigger Location of Runtime Error
    Program                                 SAPLRSSM
    Include                                 LRSSMF03
    Row                                     1,627
    Module type                             (FORM)
    Module Name                             DEL_SOURCE_SYSTEM_INIT
1624           communication_failure = 1 message l_msg_text
1625           system_failure        = 2 message l_msg_text.
1626       if sy-subrc <> 0.
>>>>>         message x051(rsar) with l_msg_text(50) l_msg_text+50(50) '' ''.
1628       endif.
Please help me on this as untill it will not be deleted, I will be unable to load the data.
suitable answer will get Full points.
Thanks.

Hi Saurabh,
PLEase go through these notes:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383837393039%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383934313030%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393738303738%7d

Short Dump-Syntax error program"CL_RSD_MULTIPROV==CP" after EHP1SP5 upgrade

Hi,
MultiProvider Activation/Display data is resulting into short dump with following text
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSD_MULTIPROV==============CP " in include
"CL_RSD_MULTIPROV==============CM010 " in
line 1:
"Method "CHECK_LINITFL" is not declared or inherited in class "CL_RSD_M"
"ULTIPROV". -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
We have recently upgraded to EHP1SP5. We noticed this issue just after that.
Regards,
PD

Hi,
Please check the note 1461401.
1461401 - System error in the program CL_RSD_MULTIPROV_CHECK
This note should help you.
Regards,
Rafael

Short Dump in MIGO transaction

When executing the transaction MIGO the transaction ends with the short dump as follows.
is it because of SAPNOTE 385830 ?
short text of error message : GET_SYTEM_BUSINESS_ERROR An error occurred while determining the business system ( No_business_system)
Technical information of error message
messgae class 00
number 001
variable 1 GET_SYTEM_BUSINESS_ERROR An error occurred while
variable 2 determining the business system ( No_business_system)
T CODE : migo
PROGRAM : SAPLMBWL
sceen no saplmigo 0001
screen line 18
the dump occurs at the line marked with -
>.
function mb_post_goods_movement.
""Local Interface:
*" IMPORTING
*"     VALUE(XBLNR_SD) OPTIONAL
*" EXPORTING
*"     VALUE(EMKPF) LIKE EMKPF STRUCTURE EMKPF
   data: l_mem_id(10) type c.                                   " 641365
Wurde zuvor eine Lieferung erzeugt, so ist kein MB_POST... nötig "HUM
   check not xdeliv = x.                                            "HUM
Control posting for external WM: Exit if BFWMS = 1 (Create delivery)
   check not mkpf-bfwms = 1.                                     "357661
   read table xmseg index 1.
   if not sy-subrc is initial.
     message a260.
   endif.
   if xmkpf-mblnr is initial.
     message a260.
   endif.
   xcommit = x.                                             "Performance
   if not xblnr_sd is initial.
     xmkpf-xblnr    = xblnr_sd.
     xmkpf-le_vbeln = xblnr_sd.                                 "XAN-SPM
     modify xmkpf index 1.
   when a goods movement for an inbound or outbound delivery is posted
   directly from VL31N/ VL01N, XBLNR is not yet known when we call
   CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
   BKPF as well. There is no other way to forward XBLNR to FI as not
   every document is posted by MB_CREATE -> a new function module in
   MBWL for transferring the information, called by FI, meant to load
   the complete function group for all MBxx postings when this isn't
   required (Performance). Would be the better way to transport the
   information after switching off MBxx in later release.
   corresponding IMPORT ... FROM MEMORY ... can be found in
   AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
     l_mem_id = 'MKPF-XBLNR'.                                   " 641365
     export xblnr = xblnr_sd to memory id l_mem_id.             " 641365
   endif.
   if xmkpf-xabln is initial.                               "note 434093
       call function 'MB_XAB_NUMBER_GET'.                   "note 434093
   endif.                                                   "note 434093
enhancement-point mb_post_goods_movements_01 spots es_saplmbwl static.
$$-Start: MB_POST_GOODS_MOVEMENTS_01----
$$
enhancement 26 dimp_general_saplmbwl.    "active version
data: l_statics_lock type c.
endenhancement.
$$-End:   MB_POST_GOODS_MOVEMENTS_01----
$$
enhancement-point mb_post_goods_movements_02 spots es_saplmbwl.
$$-Start: MB_POST_GOODS_MOVEMENTS_02----
$$
enhancement 25 dimp_general_saplmbwl.    "active version
read table xvbfa index 1.
if sy-subrc is initial and
   g_vbtyp_v = '7'.
   perform get_mdiff_kenz(sapmm07m) changing l_statics_lock.
endif.
endenhancement.
$$-End:   MB_POST_GOODS_MOVEMENTS_02----
$$
   call function 'MB_CREATE_MATERIAL_DOCUMENT_UT'
        exceptions
          error_message = 4.
As soon as we have started to put things into UPDATE TASK, we must
ensure that errors definitely terminate the transaction.
MESSAGE A is not sufficient because it can be catched from
external callers which COMMIT WORK afterwards, resulting in
incomplete updates. Read note 385830 for the full story.
   if not sy-subrc is initial.
message id sy-msgid type x number sy-msgno with            "385830
                 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    MESSAGE A263.
   endif.
Optische Archivierung
Spaete Erfassung mit Barcode
Redesign of barcode handling -> note 780365
perform barcode_update(sapmm07m) using xmkpf-mblnr
                                         xmkpf-mjahr
                                         barcode.
move-corresponding xmkpf to emkpf.
call function 'MB_MOVEMENTS_REFRESH'
    exceptions
      error_message = 4.
   move-corresponding xmkpf to emkpf.
   call function 'MB_MOVEMENTS_REFRESH'
        exceptions
          error_message = 4.
   if not sy-subrc is initial.
     message id sy-msgid type x number sy-msgno with             "385830
                sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   MESSAGE A261.
   endif.
   perform buchen_initialisieren(sapmm07m).
   clear emkpf-subrc.
clear global fields when COMMIT WORK                     "Performance
   if not sy-oncom = p.
     perform clear_xcommit on commit.
   else.
     perform clear_xcommit.              "if this FB is called on commit
   endif.
   perform clear_xcommit on rollback.                       "note 303392
endfunction

hi
check SAP Note 556000 - Short dump due to note 385830
Summary
Symptom
   Consider the subsequent note 561872 !                             *
You want to post a goods receipt for a reference document (for example purchase order, delivery ...). The checks do not cause any error. Nevertheless, the system generates a short dump which is deliberately triggered by note 385830.
One known scenario is a stock transfer process via a delivery: You have entered a stock transport order assigned to a sales order and post a goods receipt for the delivery via transaction MIGO. The sales order must be in valuated. The material to which postings are to be made is valuated separately and to be handled in batches. And the batch, which was assigned via the delivery, already exists with a valuation type in the receiving plant which is different from the one specified in the purchase order.
Other terms
MB_CREATE_GOODS_MOVEMENT, MIGO, MCHA, BWTAR.
Reason and Prerequisites
Prerequisites: see above. This is a program error.
Solution
Implement the attached program corrections.
Then implement the subsequent note 561872.
After the implementation of the note, checks are carried out in the program flow - if a batch and a valuation type were entered for a goods movement (for instance with reference to the purchase order or delivery) - on whether the assignment of the batch and valuation type is correct.
regards
KI

SMARTFORM short dump

I've made few changes to SMARTFORM in development and imported to quality.
when I tried to display same form in quality, getting short dump with below message
Error when importing object "T_NTOKENS"
and the error is coming in standard FM SSF_READ_FORM at below code..
import t_ntokens from database stxfcont(xx) id i_formname
Please suggest me how can I fix this error.
Thanks

OSS note is not relevant to my issue.
Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
Exception              CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          21.02.2012 14:12:34
Short text
Error when importing object "T_NTOKENS".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXBX" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "SSF_READ_FORM" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "T_NTOKENS", the structure did not match the
structure of the target object. The error occurred in component
no. 2.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
Source Code Extract
Line
SourceCde
20
21
data: l_stxfadm type stxfadm.
22
23
Test, ob das Formular überhaupt existiert
24
Lesen der Verwaltungsdaten
25
select single * from stxfadm into l_stxfadm
26
where formname = i_formname.
27
if sy-subrc = 0.
28
o_admdata = l_stxfadm.
29
else.
30
raise no_form.
31
endif.
32
33
Lesen des Formulars gemäß der geforderten Fassung
34
falls die gesicherte Fassung nicht existiert, wird die aktive Fassung
35
gelesen
36
perform init_datatabs.
37
38
o_active = i_active.
39
40
if i_active = space.                 " gesicherte Fassung
41
import t_ntokens t_objt t_ltext
42
from database stxfconts(xx) id i_formname
43
ignoring conversion errors.
44
if sy-subrc <> 0.
45
select * from stxfobjt into table t_objt
46
where formname = i_formname.
47
select * from stxftxt into table t_ltext
48
where txtype   = c_text_form
49
and formname = i_formname.
>>>>>
import t_ntokens from database stxfcont(xx) id i_formname
51
ignoring conversion errors.

BSP Error:bc/bsp/sap/crm_bsp_frame/mainDH.do was not called due to an error

Dear All,
i am working on CRM 5.0 Netweaver-2004S-SR2, facing below errror.
Error when processing your request
What has happened?
The URL http://hllsap44.in.u1609.unilever.com:1080/sap/bc/bsp/sap/crm_bsp_frame/mainDH.do was not called due to an error.
Note
     The following error text was processed in the system CD2 : The current application triggered a termination with a short dump.
     The error occurred on the application server hllsap44_CD2_00 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: BUILD_MODEL of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: CONSTRUCTOR of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: GET_MODEL_INSTANCE of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: SET_APPLICATION of program CL_CRM_BSP_IL=================CP
Method: DO_INIT of program CL_CRM_BSP_FRAME_MAIN=========CP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Soon reply will be appreciated.
thanks,'
Thakkar.

thanks For prompt attention towards my problem..
DUMP: Runtime Errors         MESSAGE_TYPE_X
Details:
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Short text of error message:
    Model for application set CRMD_CASE has been maintained inconsistently
    Long text of error message:
     Diagnosis
         After including the referenced application in the application set,
         at least one structure name is no longer unique.
     System Response
         An inconsistent model leads to termination.
     Procedure
         Contact your system administrator.
     Procedure for System Administration
          IMG -> Customer Relationship Management -> Layout of User
         Interface (People-Centric UI) -> Application Element-> Application
         Set.
    Technical information about the message:
    Message class....... "CRM_BSP_BLUEPRINT_DB"
    Number.............. 010
    Variable 1.......... "CRMD_CASE"
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
thanks,
Rakesh.

Short dump while creating a new status report in webdynpro cprojects

Short dump details are
Runtime Errors       OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Access via 'NULL' object reference not possible.
GET_AVAIL_CALID" "(METHOD)", of the class CL_DPR_BUPA_DISTRIBUTION failed to capture the Business partner details.
The dump analysis shows
You attempted to use a 'NULL' object reference (points to 'nothing') access a component variable: "LR_BUPA_LINK").
    An object reference must point to an object (an instance of a class)     before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Can anyone throw some light on this?

Hello Srikanth,
I have no issues in trying to help someone as polite as you! It is very nice to have questions answered in an intelligible manner - not unfortunately always the case.
Without being able to debug on your system it is quite difficult to say what might be causing this error - especially as you say this was working in a different system.
I'm sure you've already tried eliminating differences in your authorisations between the two systems? Are you registered as a developer in the new system?
Sorry I'm now just guessing as I've not come across the error myself - hopefully now that we have clearly documented the issue, someone else might be able to shed some light on what might cause it!
Chris

Short Dump due to TIME_OUT Error

Similar Messages

Maybe you are looking for