Short Dump during Business Content Installation

Hi Gurus,
       I'm working on SAP BI 7.0. I'm getting a Short Dump Error stating " Program error: ASSIGN with length 0 in program "SAPLSNR3". " while I'm try to install the Business Content.
      I'm getting this error when I'm trying to install Business Content with Grouping Option " Data flow Before ", but I didn't face any problem when I started off with the Grouping Option " Only Necessary Objects ".
     I tried analysing this problem by going to ST22 transaction & during my analysis I found that in the said program " SAPLSNR3 ", there's LSNR3F01 include in which line number 178 is having a ASSIGN statement, where its trying to assign a computed value to some data variable. Now i understand that there's some problem with the value getting computed in the ASSIGN statement.
     I also tried finding some SAP Notes for the same problem, but to my misery I couldn't find anything appropriate. Could anyone of you who had faced similar problem help me out.
     For further assistance in making your replies much easier here in I'm adding the information about BI 7.0 system components.
           SAP ABAP:               Level 12
           SAP BASIS:               Level 12
           SAP BW:                   Level 14
           Business Content:       Level 5
Waiting for a early solution from U guyz.........
Regards,
Syed Shujaath Ali.

Hi,
Apply SAP BW: Level 19 or 20
Business Content: 10
patches .

Similar Messages

Different Problems during Business Content Installation in BI 7.0

HI GURUs,
          I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
Question 1:
          Let's say when I'm trying to install 0MATERIAL infoobject
Scenario 1:
( with Necessary Objects as Grouping), the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
Scenario 2:
(_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
Note: The Figures are found in the file attached with this link.........
           [Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
Question 2:
         Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
Note: It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
       Hoping for a early optimistic solution.
Regards,
Syed Shujaath Ali.

Hi,
Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
It will sove your issue.

Error during Business Content Installation of a query

Hi,
I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
Any help on the above problem would be appreciated.
Thanks & Regards,
Raj

Hi Raj,
<i>Is the request creation for a BEx transport is different from the normal request creation??</i>
Yes, Handling of changes to already transported Queries is different to other things of BW.
Refer :
http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Re: Not able to Change or delete Query
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Business Content Installation with Remote Activation

Hi
During Business Content Installation, BI system attempts to do Remote Activation in the Source System
But in my case, it's searching for the datasources in the ERP source system instead of the CRM system
How do I get the Business Content to look into the right CRM system
Also, do I have to manually build the transfer rules of InfoSource to DataSource ? At the moment, I don`t have InfoSource automatically mapped to DataSource

Hi, before collecting the datasource to the right you have to select the source system by one of the following ways:
1) press Shift F7
2) click on the source system icon on top
3) goto menu Edit->Source system assignment
About your secod question check if the BI content already has a mapping defined if not you have to manually create the mapping.
Best Regards,
Brindha.

Short dump during ME23N transaction due to missing field in KOMP table

Hi All,
We have just upgraded to Business Suite 7.0 and are experiencing the following error:
Short dump during processing of transaction ME23N - error is in program SAPLV61A when the system calls the following field: KOMP_SERVICE_PARAM2 (this does not exist in KOMP). We need to get this resolved as soon as possible, It appears that SAP have removed this field from the table KOMP but the standard programme is still looking for this field. Can anyone provide an oss note number or insight into how to resolve this issue please.
Many Thanks
Amanda

Dear,
This problem is caused by a missing initialization of the structure KOMP in the program SAPLV61A.
The problem may also occur during , when the "Create PO automatically" indicator (TVAP-ALEKZ) is set for the relevant item category in the item category Customizing (transaction VOV7). In this case, the data of the purchase order item that was previously processed is used for the back update of the sales order from the purchase order in KOMP.
Add the following import parameter to the function module RV_KONV_SELECT:
    Parameter name        COMM_ITEM_I
    Typing          LIKE
    Associated type            KOMP
    Optional        X
    Pass Value       X
Please refer the OSS note 1261566.
Regards,
R.Brahmankar

Business content installation query

Hi Experts ,
i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
now i want to install   business content in such away that current 0EQUIPMENT should not be disturbed and business content version has attributes that are time dependant
Question is shall i install 0EQUIPMENT or not, and let the old version remain , as 0EQUIPMENT is under use at few places
secondly if i dont install in future will there be any problem in loading PM data .
Please Advise,
Thanks in Advance,
Nitya

HI,
hi,
use the option Match (X) or copy.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if:
¡        The match indicator is not set, and
¡        The install indicator is set.
In other words, the delivery version is copied to the active version.
Note
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
For more info search in forums or check the sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Regards
KP

PM business content installation

Hi Experts,
i have to start on Plant Maintanance Business content installation , Could any one provide me the data flow , what are tha data sources, first do i have to activate daatsource and replicate then activate cubes etc .
Also could any one provide me details about PM and QM Integration
Thanks In Advance
Nitya

HI ,
You can find the BI content delivered objects for PM in the below link
http://help.sap.com/saphelp_bw33/helpdata/en/b0/e3163d5abd752de10000000a114084/frameset.htm
Regards,
Sathya

Re: Business Content Installation

Hi,
I intalled cube with as usaual procedure but i can't see in workbench(RSA1). Can i know what is the problem? this is very important for me.
Thanks,
RK

Hi RK,
Check that Business content installation job has finished or not in SM37(job overview).
Once it completed, in RSA1> InfoProvider>InfoArea first Refresh your tree and click FIND to type your infocube name and search it.
you can get it surely.
NOTE: Assign points if it helps
Regards,
Arun.M.D

Short dump in BIW 7.0 business content installation

Dear Friends,
I am trying to install business content in BIW 7.0 . In RSA1 ->BI Content --> Object Types > Query Elements> Grouping data flow before ---> Install.
Once I start this installation process it gives short dump.
The dump says
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Can anybody tell me why this dump occures. Am I missing any step in BI installation.
Regards,
Mahendra

Hi ,
If any one wants to install BIW 3.5 with R/3 4.7 (for extraction) connection in single hard disk, please call me on 9342820370.
Installation charge:1000/
Hard disc req: 160 GB.
ram: 1 gb
Thanks,
Laxman rao.
9342820370
#551,26 th main,
BTM ,Bangalore.

Business content installation failed

Hi
When i try to install the objects frok the business content, the job is getting cancelled and following msg is displayed in the SM37.
07.05.2008 17:51:28 STDO: Log could not be written on output device T
07.05.2008 17:51:28 STDO: Log could not be written on output device T
07.05.2008 17:51:28 STDO: Log could not be written on output device T
07.05.2008 17:51:28 STDO: Log could not be written on output device T
07.05.2008 17:51:28 STDO: Log could not be written on output device T
07.05.2008 17:51:28 STDO: Log could not be written on output device T
07.05.2008 17:52:07 ABAP/4 processor: SYSTEM_NO_TASK_STORAGE
07.05.2008 17:52:07 Job cancelled
I know this error comes due to lack of resource in the system.
My question here is how do i know what are the resources tat system is using and in which transaction code can i check it.
I have to tell basis guy to fix the issue. To tell him i need to know where the exact prlblem is.
Thanks
Annie

Hi
The following is the dump information
Short text
    Unable to fulfil request for 91904 bytes of storage space.
What happened?
    Each transaction requires some main memory sp
    application data. If the operating system can
    space, the transaction is terminated.
What can you do?
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
           Amount of memory per user in extended memory (EM)
    o abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
           Of course, the amount of memory (in bytes) must also be
           available on the machine (main memory or file system swap).
           Caution:
           The operating system must be set up so that there is also
           enough memory for each process. Usually, the maximum address
           space is too small.
           Ask your hardware manufacturer or your competence center
           about this.
           In this case, consult your hardware vendor
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each dialog process.
    Parameters for background processes:
    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each background process.
Regards
annie

Business content installation error

Hi,
I got an error when installing the Business content ODS (0OPA_O08).
IC=0PROD_CATEG IS=0PROD_CATEG_ATTR syntax error: rows 0
Message no. RSAU466
Diagnosis
When generating the update program for data target 0PROD_CATEG, InfoSource 0PROD_CATEG_ATTR, a syntax error occured in row 0.
thanks
kamal

kamal,
please give business content collection mode , grouping , foreground / background etc...
, your SP level , Business content version etc....
also are there any short dumps for the same in ST22 ?
Is this error repeatable ? or one off ?
Arun
Message was edited by:
Arun Varadarajan

BI Business Content Installation error

Hi Experts,
Patch Level
BW              - SAPKW70012
BI CONTNET - SAPKIBIIP4
When I installing the business content, we are getting the following short dump error:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time          29.03.2007 05:12:02
Short text                                                                                |
Access via 'NULL' object reference not possible.                                              |
What happened?
Error in the ABAP Application Program                                                         |
The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be                         |
     terminated because it has                                                                    |
come across a statement that unfortunately cannot be executed.
Please let me know the solution for this error.
Advanced Thanks,
Chandra

I faced the same problem....is a Basis problem son support packages not installed....consult your basis support....is not a BW problem

Regading business content installation

Hi,
can any one tell me while we installing business content we have a option 'install' in that we have 'simulate install ' and 'install',
my question is wht is the difference btn above two options .
Thanks in advance .
Thanks & Regards,
ramnaresh.

Hi,
Installation Type
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
Refer.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube 0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Business Content Installation

Hello to all,
I have a problem while installing Business content.
As per SAP Documentation...I selected the Cube and selected Before and After grouping option. Ex: 0CSAL_C01.
I checked the dependent objects under Info Objects for 0CSAL_C01. For some of the objects it's selected MATCH (to prevent overwrite and this is set as default).
Then I installed in back ground mode option.
Once the installation is done the 0COSTCENTER is overwritten (even if I selected Match option and it de-selected Install).
Can any one please explain me why this is happened? Any documentation on it?
Does background mode not recommended? Does it always overwrite???
Thanks

Hi,
I have found this statement at
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
SAP recommends you use the Install in Background option, because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time. Make sure that when you install objects in the background, the versions are not matched; the delivery version is always installed. They are not matched against any available customer versions.
Does it mean that even if I select match, will it overwrite?
Thanks

Short Dump during Business Content Installation

Similar Messages

Maybe you are looking for