Short Dump Error While Data load
Hi Experts,
Data load to an ODS in production server has been failed because of Short dump error. The error message shows " OBJECTS_OBJREF_NOT_ASSIGNED ".
Request you to please help me out with a solution ..
Regards,
Vijay
Hi Vijay,
follow the steps below (May Help you)
Goto Monitor screen>Status Tab> using the wizard or the menu path >Environment -> Short dump> In the warehouse
Select the Error and double click
Analyse the error from the message.
1.-->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
Refresh the Transactional RFC screen and go to the Data Target(s) which have failed and see the status of the Request-->Now it should be green.
2.In some cases the above process will not work (where the Bad requests still exists after the above procedure).
In that case we need to go to the Data Targets and need to delete the bad requests and do the update again
Regards,
BH
Similar Messages
-
Hi Gurus,
I am getting error while data loading. At BI side when I check the error it says Background Job Cancelled and when I check in R3 side I got the following error
Job started
Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_11_V_ITM
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000683008 *
abap/heap_area_total.......... 4000317440 *
abap/heaplimit................ 40894464 *
zcsa/installed_languages...... ED *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500352 *
ztta/roll_extension........... 3001024512 *
4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Please help me out what should I do.
Regards,
MayankHi Mayank,
The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
Check the below note
Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
Regards
KP
Edited by: prashanthk on Jul 19, 2010 10:42 AM -
Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow
hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
exception
condition "UNKNOWN_TRANSCAT".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
"SORT_TRANSACTIONS"
or
"CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
or
"SBIE0001 " "UNKNOWN_TRANSCAT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju -
Short Dump error while loading data from R/3 to ODS
Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
transfer program using the function Activate. Remove possible syntax
errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PMHi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani.... -
ABAP short dump error while creating an invoice
Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
ManjunathHi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna -
Short Dump Error while loading master data.
Hello All,
I am trying to load data from PSA to Info Object (0Material_Attr) via DTP, I am getting error and itu2019s giving the short dump.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE.
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE".
In Job overview, job is getting cancelled, with error message
"The object name is not allowed to be empty".
ABAP/4 processor: UNCAUGHT_EXCEPTION.
We have done the following steps, even then error persist.
Transaction RSRV > All Elementary Tests > Master Data > Compare Number Range and Maximum SID for the characteristic 0REQUID.
If the system reports an error here, correct the error using the "Correct Error" function.
Kindly suggest.
Thanks in Advance .Error analysis from ST22
An exception occurred which is explained in The exception, which is assigned to class ' and therefore caused a runtime error.
The reason for the exception is: No text available for this exception
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE" -
Short dump error while loading through infopackage
Hi Experts
When iam executing the infopackage it is taking (showing the Yellow staus)very long time
where as the no of records is lesss than 3000....
I made a check in ST22 it shows a short dump which is stating "RAISE_EXCEPTION" error
and still the process is in Yellow status in RSMO T.Code
Any help on this
Thanks Muchcheck the status of the background job , if job has faild
the reasion may be because of chaing in the extract structure in the source system.
so we can replicate the data source to resolve this issue.
And also make a check with extract structure using the T.coad RSA3, to find
no of records and to find out any chainges in the structure .
prasad. -
Short dump error while filling setup tables for 2LIS_06_INV
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
plz can anyone help me out...Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Information on where terminated
Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
The main program was "RMCENEUR ".
In the source code you have the termination point in line 827
of the (Include) program "LMRMBWF01".
The program "SAPLMRMBW" was started as a background job.
Job Name....... "RMCENEUR"
Job Number..... 10524100
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLMRMBW "; its source code begins in line
806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING t_mcrbkey_bv TYPE mcrbkey_t
807 t_mcrbkey_nbv TYPE mcrbkey_t
808 t_ekbe_acc TYPE t_ekbe
809 CHANGING t_mcrbco TYPE mcrbco_t.
810
811 TYPES: BEGIN OF s_target.
812 TYPES: table_left LIKE rbco.
813 TYPES: table_right TYPE rbex.
814 TYPES: END OF s_target.
815 TYPES: t_target TYPE TABLE OF s_target.
816
817
818 DATA: t_rbco_nbv TYPE t_target,
819 t_rbco_bv TYPE t_target,
820 s_rbco TYPE s_target,
821 s_ekbe LIKE ekbe,
822 s_mcrbco TYPE mcrbco,
823 l_index LIKE sy-tabix.
824
825 * Data source: invoice item non-background
826 IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>> SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828 ON ( rmandt = imandt AND
829 rbelnr = ibelnr AND
830 rbuzei = ibuzei AND
831 rcobl_nr = icobl_nr )
832 INTO TABLE t_rbco_nbv
833 FOR ALL ENTRIES IN t_mcrbkey_nbv
834 WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835 r~belnr = t_mcrbkey_nbv-belnr.
836 ENDIF.
837 * Data source: invoice item background
838 IF NOT t_mcrbkey_bv[] IS INITIAL.
839 SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840 ON ( rmandt = imandt AND
841 rbelnr = ibelnr AND
842 rbuzei = ibuzei AND
843 rcobl_nr = icobl_nr )
844 INTO TABLE t_rbco_bv
845 FOR ALL ENTRIES IN t_mcrbkey_bv
846 WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance -
Short Dump Error while executing the DTP
Hello Experts,
I am facing an issue with DTP.
Data has been loaded to PSA successfully but while executing the DTP for loading from PSA to DSO (WO) throwing a short dump RAISE_EXCEPTION.
Short text
Exception condition "NO_DS_LG_FOUND" raised.
"RAISE_EXCEPTION" " "
"SAPLRSSTATMAN" or "LRSSTATMANU1
"RSSTATMAN_GET_PARTTAB_PSA"
or
"SAPLRSSTATMAN" "NO_DS_LG_FOUND"
or
"RSAWBN_START " "NO_DS_LG_FOUND"
We are on BI support pack 14 SAPKW70014, searched for OSS notes but there are few for SP 12/ 13.
Did any body faced the simlliar issues,,,, please help
Appreicate your quick response.You may wish to check this
Note 1083305 - P16:STATMAN:Dump in function module RSM_INFOCUBE_WRITE_CHECK
Hope it Helps
Chetan
@CP.. -
Dump error while bulk load to Sybase IQ
Hi ,
I am loading data from Sybase IQ source to Sybase IQ target database. I can load the data in normal mode. But If I am trying bulk loading it is throwing dump error. Earlier I loaded so many times using bulk load but I didn't face any issue. We upgraded to Sybase IQ 16.0 SP3 to SP8. Now We are facing this type of difficulties. Please find the attached log file for error.
Please help me how to resolve this issue.
Thanks & Regards,
Ramana.Hi Vijay,
follow the steps below (May Help you)
Goto Monitor screen>Status Tab> using the wizard or the menu path >Environment -> Short dump> In the warehouse
Select the Error and double click
Analyse the error from the message.
1.-->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
Refresh the Transactional RFC screen and go to the Data Target(s) which have failed and see the status of the Request-->Now it should be green.
2.In some cases the above process will not work (where the Bad requests still exists after the above procedure).
In that case we need to go to the Data Targets and need to delete the bad requests and do the update again
Regards,
BH -
Error while data loading in real time cube
HI experts,
I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
The cube is a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.What was the resolution to this issue. We rae having the same issue only with external system (not a flat file). We get the RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE). We have been facing this issue for a while and even opened up a message with SAP.
-
Short Dump in master data load
In a master dataload from BI to APO, i'm getting these short dumps...
CALL_FUNCTION_SIGNON_REJECTED
TIME_OUT
MESSAGE_TYPE_X
RAISE_EXCEPTION
Kindly help me out getting these dumps rectified..Hai message type x error have number of parameters for it one may be due to error in logical source system .Other may be inactive datatargets and lot more.
Time out is becouse of upfront loading trigger in the background and ask basis to extend the process time to max sap standards.
others may be due to lack of workprocess unavailability check it as well.
Goodday. -
Error while data loading in BI
Hi gurus,
Our BI team is unable to load data from BI staging to BI Target.There is no data in BI Targets because of this Users can not test the BI reports. when they run it the header file status shows yellow instead of green.
Please help.
Regards,
Priyanshu SrivastavaThe problem is that jobs logs cannot be written. for example for job
BIDTPR_6018_1 .
sm51
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event
sm21 F6 1 TemSe input/output to unopened file.
Can anybody tell how to resolve that.
Regards,
Priyanshu Srivastava -
Hi Everyone,
I'm loading 690k odd records to cube
I am facing short dump error while data request is processed to cube.
In ST22 i'm getting Timeout Error.
Buffer time is set for 10mins to process
Can anyone guide me in this issue.
Thanks in advanceHi,
Due to data volume your load took more than 7hrs. in general time out time is 7hrs. so in your case its may exceeded.
Try to increase time out time for your info package.
Go to your info pack--> menu scheduler --> time out time--> increase 7 hrs to 14hrs and trigger your load again. if its full load delete failed load and retrigger.
Thanks -
Error in Unit conversion while data loading
Hi,
I have maintained DSO in Material (0MATERIAL) info object > Bex tab > Base unit of measure > ZDSO; Then loaded this ZDSO from std data source 0MAT_UNIT_ATTR so that all conversion factors into different units which are maintained in material master data in ECC would get loaded to this DSO.
Then I have created one Conversion type (ZCON) to read source unit from record and convert it to fixed unit "ST" with reference info object as 0MATERIAL. ST is customized UOM here.
I am using ZCON conversion type to convert Qty in base UOM to Qty in ST in Bex reports under conversion tab of key figure. Now as this is std functionally, conversion would automatically takes place using ZDSO (mentioned above) as source and target UOM are not from same dimension (Base UOM is EA and target UOM is ST).
If conversion factor to ST is not found in ZDSO then conversion to base UOM would happen automatically. Now this functionality is happening perfectly in Bex but its giving error if I use the same conversion type ZCON while data loads. Its giving error for those material for which ST conversion is not maintained. But when its not maintained by default it should convert it to base UOM, but its not converting and giving error in data loads.
Hope I am able to explain the issue.
Please help me on on this issue or any way around.
Thanks in advance.
PrafullaGanesh,
Can you please check out the Alpha Conversion Routine and also nodeid for that infoobject..
There might be some inconsistencies in the code..
Hope it helps
Gattu
Maybe you are looking for
-
A couple of weeks ago my old 3s iPhone stopped automatically syncing with my microsoft laptop however it did appear in Explorer. My iPod synced no problem. I took no action because I thought the old phone may have had a problem and was about to buy a
-
Each time I SEND an email using Optimum webmail (mail.optonline.net), Firefox crashes. Using Firefox 3.6.13 on a MAC OS X 10.6.5 Any suggestions?
-
Putting a row into a pageable cache failed with error 9 and error message
Hi Guys, I am fetting the follwoing message when the job is scheduled. Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor> I read the forum and Manoj has suggested to one of the foru
-
How do I copy tunes from Ipod to computer?
I lost some songs when I bought a new computer. The only copies are on my Ipod. How can I get them back onto my computer?
-
Any First Person Shooter Games For the iPad?
Looking for any 1st Person shooter games like Marine Sharpshooter for the iPad, can't seem to find them.