Short dump error while loading through infopackage

Hi Experts
When iam executing the infopackage it is taking (showing the Yellow staus)very long time
where as the no of records is lesss than 3000....
I made a check in ST22 it shows a short dump which is stating "RAISE_EXCEPTION" error
and still the process is in Yellow status in RSMO T.Code
Any help on this
Thanks Much

check the status of the background job , if job has faild
    the reasion may be because of chaing in the extract structure in the source system.
    so we can replicate the data source to resolve this issue.
   And also make a check with extract structure using the T.coad RSA3, to find
no of records and to find out any chainges in the structure .
   prasad.

Similar Messages

Short Dump error while loading data from R/3 to ODS

Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
                                                                                Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
     GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
     can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
         ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
         transfer program using the function Activate. Remove possible syntax
         errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
        problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PM

Hi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani....

Short Dump Error while loading master data.

Hello All,
I am trying to load data from PSA to Info Object (0Material_Attr) via DTP, I am getting error and itu2019s giving the short dump.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE.
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE".
In Job overview, job is getting cancelled, with error message
"The object name is not allowed to be empty".
ABAP/4 processor: UNCAUGHT_EXCEPTION.
We have done the following steps, even then error persist.
Transaction RSRV > All Elementary Tests > Master Data > Compare Number Range and Maximum SID for the characteristic 0REQUID.
If the system reports an error here, correct the error using the "Correct Error" function.
Kindly suggest.
Thanks in Advance .

Error analysis from ST22
An exception occurred which is explained in The exception, which is assigned to class ' and therefore caused a runtime error.
The reason for the exception is: No text available for this exception
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"

Short Dump Error While Data load

Hi Experts,
Data load to an ODS in production server has been failed because of Short dump error. The error message shows " OBJECTS_OBJREF_NOT_ASSIGNED ".
Request you to please help me out with a solution ..
Regards,
Vijay

Hi Vijay,
follow the steps below (May Help you)
Goto Monitor screen>Status Tab> using the wizard or the menu path >Environment -> Short dump> In the warehouse
Select the Error and double click
Analyse the error from the message.
1.-->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
Refresh the Transactional RFC screen and go to the Data Target(s) which have failed and see the status of the Request-->Now it should be green.
2.In some cases the above process will not work (where the Bad requests still exists after the above procedure).
In that case we need to go to the Data Targets and need to delete the bad requests and do the update again
Regards,
BH

ABAP short dump error while creating an invoice

Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
Manjunath

Hi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna

Short dump:ASSIGN_TYPE_CONFLICT- While loading data through DTP

Dear all:
We currently work with BI NW2004s SP10. We created transformation for mapping InfoSource and InfoCube based on 3.x transfer rule. For example, we used cube 0PUR_C04 and Data Source 2LIS_02_ITM_CP. And the transformation is "TRCS Z2LIS_02_ITM_CP -> CUBE 0PUR_C04". Everytime when we tried to load data via DTP. A runtime short dump occurred: ASSIGN_TYPE_CONFLICT
Error analysis:
You attempted to assign a field to a typed fie but the field does not have the required type.
we went back and forth to activated transformation and DTP. But still, same error occurred.
Any idea, please !!!!
BR
SzuFen

Hi Pavel:
Please refer to the following information-
User and Transaction
    Client.............. 888
    User................ "TW_S
    Language key........ "E"
    Transaction......... " "
    Program............. "GPD0
    Screen.............. "SAPM
    Screen line......... 6
===========================================================
Information on where terminated
    Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
     "EXECUTE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 704
    of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
    The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
    Job Name....... "BIDTPR_284_1"
    Job Initiator.. "TW_SZU"
    Job Number..... 16454800
===========================================================
Short text
    Type conflict with ASSIGN in program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
===========================================================
Error analysis
    You attempted to assign a field to a typed field symbol,
    but the field does not have the required type.
===========================================================
Information on where terminated
    Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
     "EXECUTE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 704
    of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
    The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
    Job Name....... "BIDTPR_284_1"
    Job Initiator.. "TW_SZU"
    Job Number..... 16454800
===========================================================
Line SourceCde
674         ELSE.
675           ASSIGN rdsTG_1->*          to <_ys_TG_1>.
676           CLEAR <_ys_TG_1>.
677           MOVE-CORRESPONDING G1 TO <_ys_TG_1>.
678           <_ys_TG_1>-requid    = l_requid.
679           l_recno_TG_1          = l_recno_TG_1 + 1.
680           ls_cross-insegid      = 1.
681           ls_cross-inrecord     = l_recno_SC_1.
682           ls_cross-outsegid     = 1.
683           ls_cross-outrecord    = l_recno_TG_1.
684
685           CALL METHOD i_r_log->add_cross_tab
686             EXPORTING
687               I_S_CROSSTAB = ls_cross.
688
689 **     Record# in target = sy-tabix - if sorting of table won't be changed
690           <_ys_TG_1>-record     = l_recno_TG_1.
691           INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1>.
692           IF sy-subrc <> 0.
693             CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack.
694           ENDIF.
695
696         ENDIF.      "Read table
697 *
698       ENDIF.
699       CLEAR skipseg_all.
700     ENDLOOP.
701 * -
insert table into outbound segment -
702
703     <_yt_TG_1>[] = <_yth_TG_1>[].
>>>>>
705     rTG_1->insert_table( rdtTG_1_dp ).
706   ENDMETHOD.                 "execute
707
708
709
710 endclass.                    "lcl_transform IMPLEMENTATION
711
712 &----
713 *&      Form get_runtime_ref
714 &----
715 *       text
716 ----
717 *      -->C_R_EXE    text
718 ----
719 form get_runtime_ref
720 changing c_r_exe type ref to object.
721
722   data: l_r_exe type ref to lcl_transform.
723   create object l_r_exe.
===========================================================
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Process
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 0TOTDELTIME
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070420
SY-UZEIT 164557
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
===========================================================
Active Calls/Events
No.   Ty.          Program                             Include
      Name
    6 METHOD       GPD0QBVJ2WFQZZXBD0IJ1DSZAEL         GPD0QBVJ2WFQZZXBD0IJ1DSZAEL
      LCL_TRANSFORM=>EXECUTE
    5 METHOD       CL_RSTRAN_TRFN_CMD============CP    CL_RSTRAN_TRFN_CMD============CM005
      CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
    4 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM00Q
      CL_RSBK_PROCESS=>PROCESS_REQUEST
    3 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM002
      CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
    2 FUNCTION     SAPLRSBATCH                         LRSBATCHU13
      RSBATCH_EXECUTE_PROCESS
    1 EVENT        RSBATCH_EXECUTE_PROZESS             RSBATCH_EXECUTE_PROZESS
      START-OF-SELECTION
===========================================================
Thank you and BR
SF

Short dump issue while loading data

Hello All,
We are trying to load the data to the cube , but every time it is throwing us a short dump with the below error.
We have found a SAP Note as well for the below error , Please suggest, how to implement the same.
Error:
Runtime Errors         CONVT_NO_NUMBER
METHOD end_routine.
=== Segments ===
   FIELD-SYMBOLS:
     <RESULT_FIELDS>    TYPE _ty_s_TG_1.
   DATA:
     MONITOR_REC     TYPE rstmonitor.
   ... "insert your code here
-- fill table "MONITOR" with values of structure "MONITOR_REC"
-   to make monitor entries
   ... "to cancel the update process
    raise exception type CX_RSROUT_ABORT.
*Fiscal year quarter addition
   loop at RESULT_PACKAGE assigning <RESULT_FIELDS>.
     if <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 1 and 3.
       CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q3' INTO
       <RESULT_FIELDS>-/bic/zsp_FYQA.
     elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 4 and 6.
       CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q4' INTO
       <RESULT_FIELDS>-/bic/zsp_FYQA.
     elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 7 and 9.
       CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q1' INTO
       <RESULT_FIELDS>-/bic/zsp_FYQA.
     elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 10 and 12.
       CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q2' INTO
       <RESULT_FIELDS>-/bic/zsp_FYQA.
endif.
endloop.
ENDDMETHOD.                    "end_routine
THOD inverse_end_routine.
IMPORTING

Hi,
As suggested by note, you need to put this code in end routine.
Check the syntax , if error go through it and fix syntax (take help of ABAPer if required) and
activate Transformation and DTP.
Thank-You.
Regards,
VB

Short dump error while filling setup tables for 2LIS_06_INV

Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
plz can anyone help me out...

Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
Information on where terminated
    Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
    The main program was "RMCENEUR ".
    In the source code you have the termination point in line 827
    of the (Include) program "LMRMBWF01".
    The program "SAPLMRMBW" was started as a background job.
    Job Name....... "RMCENEUR"
    Job Number..... 10524100
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLMRMBW "; its source code begins in line
    806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING    t_mcrbkey_bv    TYPE mcrbkey_t
807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
808                                  t_ekbe_acc      TYPE t_ekbe
809                         CHANGING t_mcrbco        TYPE mcrbco_t.
810
811   TYPES: BEGIN OF s_target.
812   TYPES: table_left LIKE rbco.
813   TYPES: table_right TYPE rbex.
814   TYPES: END OF s_target.
815   TYPES: t_target TYPE TABLE OF s_target.
816
817
818   DATA: t_rbco_nbv TYPE t_target,
819         t_rbco_bv   TYPE t_target,
820         s_rbco      TYPE s_target,
821         s_ekbe      LIKE ekbe,
822         s_mcrbco    TYPE mcrbco,
823         l_index     LIKE sy-tabix.
824
   825 * Data source: invoice item non-background
826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>>     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828        ON   ( rmandt = imandt AND
829               rbelnr = ibelnr AND
830               rbuzei = ibuzei AND
831               rcobl_nr = icobl_nr )
832        INTO TABLE t_rbco_nbv
833        FOR ALL ENTRIES IN t_mcrbkey_nbv
834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835              r~belnr = t_mcrbkey_nbv-belnr.
836   ENDIF.
837 * Data source: invoice item background
838   IF NOT t_mcrbkey_bv[] IS INITIAL.
839     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840        ON   ( rmandt = imandt AND
841               rbelnr = ibelnr AND
842               rbuzei = ibuzei AND
843               rcobl_nr = icobl_nr )
844        INTO TABLE t_rbco_bv
845        FOR ALL ENTRIES IN t_mcrbkey_bv
846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance

Short Dump Error while executing the DTP

Hello Experts,
I am facing an issue with DTP.
Data has been loaded to PSA successfully but while executing the DTP for loading from PSA to DSO (WO) throwing a short dump RAISE_EXCEPTION.
Short text
Exception condition "NO_DS_LG_FOUND" raised.
"RAISE_EXCEPTION" " "
"SAPLRSSTATMAN" or "LRSSTATMANU1
"RSSTATMAN_GET_PARTTAB_PSA"
or
"SAPLRSSTATMAN" "NO_DS_LG_FOUND"
or
"RSAWBN_START " "NO_DS_LG_FOUND"
We are on BI support pack 14 SAPKW70014, searched for OSS notes but there are few for SP 12/ 13.
Did any body faced the simlliar issues,,,, please help
Appreicate your quick response.

You may wish to check this
Note 1083305 - P16:STATMAN:Dump in function module RSM_INFOCUBE_WRITE_CHECK
Hope it Helps
Chetan
@CP..

Short dump error in Loading data into ODS

Hi All,
I am facing problem in loading data from R/3 to BW into an ODS. The system is going into short dump.The error message occuring in BW side is
Trigger Location of Runtime Error
    Program                               SAPLRSS1
    Include                                 LRSS1F11
    Row                                     1.358
    Module type                         (FORM)
Module_Name :RSM1_CHECK_FOR_DELTAUPD
So can any body help me regarding this.
Thanks in advance
Anurag

Hi Anurag,
please check out this link: https://websmp107.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=405943&_NLANG=EN
regards
Siggi

Short Dump Error

Hi Everyone,
I'm loading 690k odd records to cube
I am facing short dump error while data request is processed to cube.
In ST22 i'm getting Timeout Error.
Buffer time is set for 10mins to process
Can anyone guide me in this issue.
Thanks in advance

Hi,
Due to data volume your load took more than 7hrs. in general time out time is 7hrs. so in your case its may exceeded.
Try to increase time out time for your info package.
Go to your info pack--> menu scheduler --> time out time--> increase 7 hrs to 14hrs and trigger your load again. if its full load delete failed load and retrigger.
Thanks

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error While loading into BW using infoPackage

Hi All,
While following directions posted at the following wiki page https://wiki.sdn.sap.com/wiki/display/BOBJ/ConfiguretheLoadJobinBW%28DS+3.2%29,
we get an error while loading data into BW using infoPackage via Data services 3.2
In SAP BI side Error says :"Error while executing the following command: -sJO return code:220"
On DS side for the RFC server log we get the error" Error while executing the following command -sJOB_SQL_TO_DBI -Ubbu -P;(encrypted password) -A (encryted information) -VMODE=F"
Issue is still open with support as we still cannot excute the job from infopackage. it is succesfully executed from designer, admin console, batch file.
Any insights/help would be appreciated.
Thanks.
Edited by: rana_accn on Jan 26, 2010 6:48 PM

Sure I will.
One thing we have noticed is that in the server_eventlog parameter for the log line "Starting job with command line parameters are different"
When job is executed from DS side parameters -Ct -Cm -Ca -Cj -Cp -S -N -Q -U -P -G -r -T -Locale are used
When job is executed from BW side parameters -Ct -Cm -Ca -Cj -Cp -s -N -Q are used
Also when the job is executed from BW, log files start getting created but then trace and error file show an error that cannot open database - and that points to DSCentral repository.This repository is not even mapped to the job server and the job has been exported from the correct repository as command line execution of the job works perfectly fine.
Thnx
Just an update we were not able to figure out why this happened in the existing environment. One reason given was that somehow the commands which were being executed from BW side were getting corrupted. We had to build a new environment and this is no longer an issue in the new environment, as now all jobs can be executed from BW. Only difference between the 2 environments was we are now on 12.2.1.3 while earlier we were on 12.2.0.0.
Edited by: rana_accn on Mar 23, 2010 10:21 PM
Edited by: rana_accn on Apr 29, 2010 9:46 PM

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Short dump error while loading through infopackage

Similar Messages

Maybe you are looking for